SOLVER7 Study. Nothing Else.
Practice Set 6.1 Q5

A frequency distribution of funds collected by \(120\) workers in a company for the drought affected people are given in the following table. Find the mean of the funds by 'step deviation' method.

MAH STATE BOARD Mah SB Class 10 Maths · Statistics

Solution

👶 Simple Explanation

Simple Explanation

Imagine all the workers in a factory put money into a big pot. Some gave a little, some gave a lot. We want to know the fair share — how much each worker gave on average. It is like splitting the total collection equally among everyone. We look at groups of workers and how much each group put in. Adding it all up and sharing equally gives us one number. That number here turns out to be Rs. 987.50 per worker.

Answer: Mean fund collected per worker \(= \text{Rs. } 987.50\).

📖 Mean by Step Deviation Method

Detailed Explanation

When class intervals are of equal width, the step deviation method makes computing the mean easier. We choose an assumed mean \(A\) (usually the class mark of a middle class), then find the deviation of each class mark \(x_i\) from \(A\), divide by the common class width \(h\) to get \(u_i = \dfrac{x_i - A}{h}\), and finally use the weighted average of \(u_i\) to shift back to the actual mean. This reduces the arithmetic to small integers, so calculations stay quick and error-free.

Formula Used

\[\bar{x} = A + h \cdot \dfrac{\sum f_i u_i}{\sum f_i}, \quad u_i = \dfrac{x_i - A}{h}\]

Solution

  1. Step 1: Write the class marks: Class mark \(x_i = \dfrac{\text{lower limit} + \text{upper limit}}{2}\). So the class marks are 250, 750, 1250, 1750, 2250 with frequencies 35, 28, 32, 15, 10 respectively.
  2. Step 2: Choose the assumed mean and class width: Take assumed mean \(A = 1250\) (middle class mark) and class width \(h = 500\).
  3. Step 3: Compute \(u_i = \dfrac{x_i - A}{h}\): For \(x_i = 250, 750, 1250, 1750, 2250\), we get \(u_i = -2, -1, 0, 1, 2\) respectively.
  4. Step 4: Compute \(f_i u_i\): \(35 \times (-2) = -70\), \(28 \times (-1) = -28\), \(32 \times 0 = 0\), \(15 \times 1 = 15\), \(10 \times 2 = 20\).
  5. Step 5: Find the required sums: \[\sum f_i = 35 + 28 + 32 + 15 + 10 = 120\] \[\sum f_i u_i = -70 - 28 + 0 + 15 + 20 = -63\]
  6. Step 6: Apply the step deviation formula: \[\bar{x} = A + h \cdot \dfrac{\sum f_i u_i}{\sum f_i} = 1250 + 500 \times \dfrac{-63}{120}\] \[\bar{x} = 1250 - \dfrac{31500}{120} = 1250 - 262.5 = 987.5\]

Final Answer

Mean fund collected per worker \(= \text{Rs. } 987.50\).

Common Mistake

A frequent error is forgetting to multiply \(\dfrac{\sum f_i u_i}{\sum f_i}\) by the class width \(h\). Students sometimes just add this ratio directly to \(A\), which gives a completely wrong mean. Always remember the factor \(h\) in the step deviation formula.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Find the class mark for each interval using \(x_i = \dfrac{\text{lower limit} + \text{upper limit}}{2}\). The five class marks are \(250, 750, 1250, 1750, 2250\) with corresponding frequencies \(35, 28, 32, 15, 10\). — Reason: Class marks represent the centre of each interval and are used in place of raw data values for grouped data calculations.
  2. Step 2: Choose the assumed mean \(A = 1250\) (the middle class mark) and note the class width \(h = 500\). — Reason: Picking the middle class mark as the assumed mean keeps the deviations small and balanced, making arithmetic easier.
  3. Step 3: Calculate \(u_i = \dfrac{x_i - A}{h}\) for each class mark. For \(x_i = 250\): \(u_i = \dfrac{250 - 1250}{500} = -2\). For \(x_i = 750\): \(u_i = \dfrac{750 - 1250}{500} = -1\). For \(x_i = 1250\): \(u_i = \dfrac{1250 - 1250}{500} = 0\). For \(x_i = 1750\): \(u_i = \dfrac{1750 - 1250}{500} = 1\). For \(x_i = 2250\): \(u_i = \dfrac{2250 - 1250}{500} = 2\). — Reason: Dividing deviations by \(h\) converts them into simple integers, reducing calculation errors.
  4. Step 4: Multiply each frequency by its corresponding \(u_i\) to get \(f_i u_i\): \(35 \times (-2) = -70\), \(28 \times (-1) = -28\), \(32 \times 0 = 0\), \(15 \times 1 = 15\), \(10 \times 2 = 20\). — Reason: These products weight each step deviation by how many workers fall in that class, preparing us for the weighted average.
  5. Step 5: Add up all frequencies and all \(f_i u_i\) values. Total frequency: \[\sum f_i = 35 + 28 + 32 + 15 + 10 = 120\] Total weighted step deviation: \[\sum f_i u_i = -70 + (-28) + 0 + 15 + 20 = -63\] — Reason: These two sums are the only inputs needed to apply the step deviation formula.
  6. Step 6: Substitute into the formula \(\bar{x} = A + h \cdot \dfrac{\sum f_i u_i}{\sum f_i}\): \[\bar{x} = 1250 + 500 \times \dfrac{-63}{120}\] Simplify \(\dfrac{-63}{120} = -0.525\), so \[\bar{x} = 1250 + 500 \times (-0.525) = 1250 - 262.50 = 987.50\] — Reason: Multiplying back by \(h\) and adding \(A\) reverses the step transformation, giving the actual mean in the original units (rupees).

Final Answer

Mean fund collected per worker \(= \text{Rs. } 987.50\).

Common Mistake

One common mistake: Students forget to multiply by \(h\) when applying the formula and write \(\bar{x} = A + \dfrac{\sum f_i u_i}{\sum f_i}\), which gives an incorrect answer of \(\text{Rs. } 1249.475\) instead of the correct \(\text{Rs. } 987.50\).

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Class marks: \( x_i = 250, 750, 1250, 1750, 2250 \); frequencies: \( f_i = 35, 28, 32, 15, 10 \); take \( A = 1250 \), \( h = 500 \), giving \( u_i = -2, -1, 0, 1, 2 \).
  2. Step 2: Compute \( f_i u_i \): \( -70, -28, 0, 15, 20 \); so \( \sum f_i = 120 \) and \( \sum f_i u_i = -70 - 28 + 0 + 15 + 20 = -63 \).
  3. Step 3: Apply formula: \[ \bar{x} = 1250 + 500 \times \dfrac{-63}{120} = 1250 - 262.50 = 987.50 \]

Answer: Mean fund collected per worker \(= \text{Rs. } 987.50\).

➕ More Examples

More Examples

Example 1

Question: The following table shows the number of hours per week spent on studying by 100 students in a school. Find the mean study hours using the step deviation method. \nClass Interval (hours): 0–5, 5–10, 10–15, 15–20, 20–25\nNumber of Students (frequency): 8, 22, 35, 25, 10

Solution: Step 1: Find the class midpoints \( x_i \). \nClass 0–5: \( x_1 = \dfrac{0+5}{2} = 2.5 \) \nClass 5–10: \( x_2 = \dfrac{5+10}{2} = 7.5 \) \nClass 10–15: \( x_3 = \dfrac{10+15}{2} = 12.5 \) \nClass 15–20: \( x_4 = \dfrac{15+20}{2} = 17.5 \) \nClass 20–25: \( x_5 = \dfrac{20+25}{2} = 22.5 \) \nStep 2: Choose the assumed mean. The class with the highest frequency is 10–15, so we choose \( A = 12.5 \). The class width is \( h = 5 \). \nStep 3: Compute step deviations \( u_i = \dfrac{x_i - A}{h} \). \nFor \( x_1 = 2.5 \): \( u_1 = \dfrac{2.5 - 12.5}{5} = \dfrac{-10}{5} = -2 \) \nFor \( x_2 = 7.5 \): \( u_2 = \dfrac{7.5 - 12.5}{5} = \dfrac{-5}{5} = -1 \) \nFor \( x_3 = 12.5 \): \( u_3 = \dfrac{12.5 - 12.5}{5} = 0 \) \nFor \( x_4 = 17.5 \): \( u_4 = \dfrac{17.5 - 12.5}{5} = \dfrac{5}{5} = 1 \) \nFor \( x_5 = 22.5 \): \( u_5 = \dfrac{22.5 - 12.5}{5} = \dfrac{10}{5} = 2 \) \nStep 4: Compute \( f_i u_i \) for each class. \( f_1 u_1 = 8 \times (-2) = -16 \) \( f_2 u_2 = 22 \times (-1) = -22 \) \( f_3 u_3 = 35 \times 0 = 0 \) \( f_4 u_4 = 25 \times 1 = 25 \) \( f_5 u_5 = 10 \times 2 = 20 \) \nStep 5: Compute the sums. \[ \sum f_i = 8 + 22 + 35 + 25 + 10 = 100 \] \[ \sum f_i u_i = -16 + (-22) + 0 + 25 + 20 = 7 \] \nStep 6: Apply the step deviation formula. \[ \bar{x} = A + \left( \frac{\sum f_i u_i}{\sum f_i} \right) \times h \] \[ \bar{x} = 12.5 + \left( \frac{7}{100} \right) \times 5 \] \[ \bar{x} = 12.5 + 0.35 = 12.85 \] \nTherefore, the mean study hours per week is \( 12.85 \) hours.

Answer: Mean = 12.85 hours

Example 2

Question: A survey was conducted among 80 households to record their monthly electricity consumption (in units). The data collected is given below. Using the step deviation method, find the mean electricity consumption. \nConsumption (units): 100–150, 150–200, 200–250, 250–300, 300–350, 350–400\nNumber of Households: 5, 14, 20, 24, 12, 5

Solution: Step 1: Find the class midpoints \( x_i \). \nClass 100–150: \( x_1 = \dfrac{100+150}{2} = 125 \) \nClass 150–200: \( x_2 = \dfrac{150+200}{2} = 175 \) \nClass 200–250: \( x_3 = \dfrac{200+250}{2} = 225 \) \nClass 250–300: \( x_4 = \dfrac{250+300}{2} = 275 \) \nClass 300–350: \( x_5 = \dfrac{300+350}{2} = 325 \) \nClass 350–400: \( x_6 = \dfrac{350+400}{2} = 375 \) \nStep 2: Choose the assumed mean. The class with the highest frequency is 250–300, so we choose \( A = 275 \). The class width is \( h = 50 \). \nStep 3: Compute step deviations \( u_i = \dfrac{x_i - A}{h} \). \nFor \( x_1 = 125 \): \( u_1 = \dfrac{125 - 275}{50} = \dfrac{-150}{50} = -3 \) \nFor \( x_2 = 175 \): \( u_2 = \dfrac{175 - 275}{50} = \dfrac{-100}{50} = -2 \) \nFor \( x_3 = 225 \): \( u_3 = \dfrac{225 - 275}{50} = \dfrac{-50}{50} = -1 \) \nFor \( x_4 = 275 \): \( u_4 = \dfrac{275 - 275}{50} = 0 \) \nFor \( x_5 = 325 \): \( u_5 = \dfrac{325 - 275}{50} = \dfrac{50}{50} = 1 \) \nFor \( x_6 = 375 \): \( u_6 = \dfrac{375 - 275}{50} = \dfrac{100}{50} = 2 \) \nStep 4: Compute \( f_i u_i \) for each class. \( f_1 u_1 = 5 \times (-3) = -15 \) \( f_2 u_2 = 14 \times (-2) = -28 \) \( f_3 u_3 = 20 \times (-1) = -20 \) \( f_4 u_4 = 24 \times 0 = 0 \) \( f_5 u_5 = 12 \times 1 = 12 \) \( f_6 u_6 = 5 \times 2 = 10 \) \nStep 5: Compute the sums. \[ \sum f_i = 5 + 14 + 20 + 24 + 12 + 5 = 80 \] \[ \sum f_i u_i = -15 + (-28) + (-20) + 0 + 12 + 10 = -41 \] \nStep 6: Apply the step deviation formula. \[ \bar{x} = A + \left( \frac{\sum f_i u_i}{\sum f_i} \right) \times h \] \[ \bar{x} = 275 + \left( \frac{-41}{80} \right) \times 50 \] \[ \bar{x} = 275 + (-0.5125) \times 50 \] \[ \bar{x} = 275 - 25.625 = 249.375 \] \nTherefore, the mean monthly electricity consumption is \( 249.375 \) units.

Answer: Mean = 249.375 units

🎯 Try a Similar Question

Try a Similar Question

Question: The following table shows the amount (in Rs.) donated by 100 employees of an organisation to a flood relief fund. Find the mean donation per employee using the step deviation method. \nDonation (in Rs.) | Number of Employees 200 – 400 | 10 400 – 600 | 18 600 – 800 | 22 800 – 1000 | 25 1000 – 1200 | 15 1200 – 1400 | 10

Solution

  1. Step 1: Find Class Midpoints: The midpoint of each class is found as \( x_i = \dfrac{\text{lower limit} + \text{upper limit}}{2} \). \nClass 200–400: \( x_1 = 300 \)\nClass 400–600: \( x_2 = 500 \)\nClass 600–800: \( x_3 = 700 \)\nClass 800–1000: \( x_4 = 900 \)\nClass 1000–1200: \( x_5 = 1100 \)\nClass 1200–1400: \( x_6 = 1300 \)
  2. Step 2: Choose Assumed Mean and Class Width: Choose the assumed mean \( A = 900 \) (midpoint of the class with highest frequency). The class width is \( h = 200 \).
  3. Step 3: Compute Step Deviations: Step deviation is \( u_i = \dfrac{x_i - A}{h} = \dfrac{x_i - 900}{200} \). \nFor \( x_1 = 300 \): \( u_1 = \dfrac{300 - 900}{200} = -3 \)\nFor \( x_2 = 500 \): \( u_2 = \dfrac{500 - 900}{200} = -2 \)\nFor \( x_3 = 700 \): \( u_3 = \dfrac{700 - 900}{200} = -1 \)\nFor \( x_4 = 900 \): \( u_4 = \dfrac{900 - 900}{200} = 0 \)\nFor \( x_5 = 1100 \): \( u_5 = \dfrac{1100 - 900}{200} = 1 \)\nFor \( x_6 = 1300 \): \( u_6 = \dfrac{1300 - 900}{200} = 2 \)
  4. Step 4: Compute f·u for Each Class: Multiply each frequency by its step deviation: \nClass 200–400: \( f_1 u_1 = 10 \times (-3) = -30 \)\nClass 400–600: \( f_2 u_2 = 18 \times (-2) = -36 \)\nClass 600–800: \( f_3 u_3 = 22 \times (-1) = -22 \)\nClass 800–1000: \( f_4 u_4 = 25 \times 0 = 0 \)\nClass 1000–1200: \( f_5 u_5 = 15 \times 1 = 15 \)\nClass 1200–1400: \( f_6 u_6 = 10 \times 2 = 20 \)
  5. Step 5: Compute Σf and Σf·u: Total number of employees: \[ \sum f_i = 10 + 18 + 22 + 25 + 15 + 10 = 100 \] \nSum of \( f_i u_i \): \[ \sum f_i u_i = -30 + (-36) + (-22) + 0 + 15 + 20 = -53 \]
  6. Step 6: Apply the Step Deviation Formula: Using the formula: \[ \text{Mean} = A + \left(\frac{\sum f_i u_i}{\sum f_i}\right) \times h \]\nSubstituting values: \[ \text{Mean} = 900 + \left(\frac{-53}{100}\right) \times 200 \] \[ \text{Mean} = 900 + (-0.53) \times 200 \] \[ \text{Mean} = 900 - 106 \] \[ \text{Mean} = 794 \]

Answer: The mean donation per employee is Rs. 794.

Everything you get with Solver7

More questions in Statistics

Chapter 6 Examples Q1 Practice Set 6.1 Q1 Practice Set 6.2 Q1 Practice Set 6.3 Q1 Practice Set 6.4 Q1 Practice Set 6.5 Q1 (i) Practice Set 6.6 Q1 Miscellaneous Problem Set 6 Q1 (i) 04/2019 2019 / Question 1 QA (i) 04/2019 2019 / Question 5 Q1 N362 2020 / Question 4 Q1 N384 2024 / Question 5 Q1 N384 2026 / Question 4 Q1 N619 2024 / Question 3 QA (i) N619 2024 / Question 5 Q1 (a) N919 2026 / Question 5 Q1 Chapter 6 Examples Q2 Practice Set 6.1 Q2 Practice Set 6.2 Q2 Practice Set 6.3 Q2 Practice Set 6.4 Q2 Practice Set 6.5 Q1 (ii) Practice Set 6.6 Q2 Miscellaneous Problem Set 6 Q1 (ii) 04/2019 2019 / Question 3 QA (ii) 04/2019 2019 / Question 6 Q2 (a) N384 2026 / Question 5 Q2 (a) N619 2024 / Question 4 Q2 N619 2024 / Question 5 Q1 (b) N819 2025 / Question 5 Q2 (a) N913 2023 / Question 4 Q2 N913 2023 / Question 5 Q2 Chapter 6 Examples Q3 Practice Set 6.1 Q3 Practice Set 6.2 Q3 Practice Set 6.3 Q3 Practice Set 6.4 Q3 Practice Set 6.5 Q1 (iii) Practice Set 6.6 Q3 Miscellaneous Problem Set 6 Q1 (iii) 04/2018 2018 / Question 5 Q3 04/2019 2019 / Question 6 Q2 (b) N384 2024 / Question 4 Q3 N384 2026 / Question 5 Q2 (b) N684 2025 / Question 2 QA (iii) N684 2025 / Question 3 QB (i) N684 2025 / Question 4 Q3 N819 2025 / Question 4 Q3 N819 2025 / Question 5 Q2 (b) Chapter 6 Examples Q4 Practice Set 6.1 Q4 Practice Set 6.2 Q4 Practice Set 6.3 Q4 Practice Set 6.4 Q4 Practice Set 6.5 Q1 (iv) Practice Set 6.6 Q4 Miscellaneous Problem Set 6 Q1 (iv) 04/2019 2019 / Question 6 Q2 (c) N384 2026 / Question 1 QA (iv) N384 2026 / Question 5 Q2 (c)