SOLVER7 Study. Nothing Else.
2024 Board Paper QB (iv)

In the following table, the toll (in Rs.) paid from \(6\) am to \(6\) pm by drivers and the number of vehicles is shown. Find the mean of the toll by ‘assumed mean’ method.

MAH STATE BOARD Mah SB Class 10 Maths · Statistics

Solution

👶 Simple Explanation

Simple Explanation

Imagine collecting toll money from cars on a highway. Some cars pay less, some pay more. We want to find a middle or average amount paid. Think of it like finding the fairest single price everyone could have paid. We look at how many cars paid each amount, weigh them carefully, and find the balance point. That balance point here lands near Rs. 521. It is like balancing a seesaw with weights placed at different spots.

Answer: The mean toll is approximately Rs. \( 521.43 \).

📖 Mean of Toll by Assumed Mean Method

Detailed Explanation

In a grouped frequency distribution, the mean can be found using the assumed mean method to make calculations easier. Instead of multiplying each class mark by its frequency directly, we choose an assumed mean (usually the class mark of the middle class), and compute the deviation of every class mark from it. Since the deviations are smaller numbers, the arithmetic becomes simpler. The formula then adjusts for this shift by adding back the assumed mean at the end. Here, the class marks are the midpoints of each toll interval, and frequencies are the numbers of vehicles.

Formula Used

\[ \bar{x} = A + \frac{\sum f_i d_i}{\sum f_i} \] where \( d_i = x_i - A \), \( x_i \) is the class mark, and \( A \) is the assumed mean.

Solution

  1. Step 1: Find the class marks: The class mark of each interval is the average of its lower and upper limits. For 300-400: \( x_1 = 350 \). For 400-500: \( x_2 = 450 \). For 500-600: \( x_3 = 550 \). For 600-700: \( x_4 = 650 \). For 700-800: \( x_5 = 750 \).
  2. Step 2: Choose the assumed mean: We choose the class mark of the middle class as the assumed mean. Take \( A = 550 \).
  3. Step 3: Compute deviations \( d_i = x_i - A \): The deviations are: \( d_1 = 350 - 550 = -200 \), \( d_2 = 450 - 550 = -100 \), \( d_3 = 550 - 550 = 0 \), \( d_4 = 650 - 550 = 100 \), \( d_5 = 750 - 550 = 200 \).
  4. Step 4: Multiply frequencies by deviations: Frequencies are \( f_1 = 80,\ f_2 = 110,\ f_3 = 120,\ f_4 = 70,\ f_5 = 40 \). Now, \( f_1 d_1 = 80 \times (-200) = -16000 \), \( f_2 d_2 = 110 \times (-100) = -11000 \), \( f_3 d_3 = 120 \times 0 = 0 \), \( f_4 d_4 = 70 \times 100 = 7000 \), \( f_5 d_5 = 40 \times 200 = 8000 \).
  5. Step 5: Compute the sums: Sum of frequencies: \[ \sum f_i = 80 + 110 + 120 + 70 + 40 = 420 \] Sum of \( f_i d_i \): \[ \sum f_i d_i = -16000 - 11000 + 0 + 7000 + 8000 = -12000 \]
  6. Step 6: Apply the assumed mean formula: Substituting the values: \[ \bar{x} = 550 + \frac{-12000}{420} \] \[ \bar{x} = 550 - 28.57 \] \[ \bar{x} \approx 521.43 \]

Final Answer

The mean toll is approximately Rs. \( 521.43 \).

Common Mistake

A common mistake is using the lower limit of a class (like 300, 400, ...) instead of the class mark (midpoint) as \( x_i \). Always compute \( x_i \) as the midpoint of the class interval before finding the deviations.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Find the class mark (midpoint) of each toll interval by averaging its lower and upper boundaries. For 300–400: \( x_1 = \frac{300 + 400}{2} = 350 \). For 400–500: \( x_2 = \frac{400 + 500}{2} = 450 \). For 500–600: \( x_3 = \frac{500 + 600}{2} = 550 \). For 600–700: \( x_4 = \frac{600 + 700}{2} = 650 \). For 700–800: \( x_5 = \frac{700 + 800}{2} = 750 \). — Reason: Class marks represent the entire class interval with a single value, which is needed to compute the mean.
  2. Step 2: Select the assumed mean \( A = 550 \), which is the class mark of the middle interval (500–600). — Reason: Choosing the middle class mark as the assumed mean keeps the deviations small and balanced, making arithmetic easier.
  3. Step 3: Calculate the deviation \( d_i = x_i - A \) for each class mark. \( d_1 = 350 - 550 = -200 \), \( d_2 = 450 - 550 = -100 \), \( d_3 = 550 - 550 = 0 \), \( d_4 = 650 - 550 = 100 \), \( d_5 = 750 - 550 = 200 \). — Reason: Deviations measure how far each class mark is from the assumed mean; working with these smaller numbers reduces calculation errors.
  4. Step 4: Multiply each frequency by its corresponding deviation to get \( f_i d_i \). The frequencies are \( f_1 = 80,\ f_2 = 110,\ f_3 = 120,\ f_4 = 70,\ f_5 = 40 \). \( f_1 d_1 = 80 \times (-200) = -16000 \), \( f_2 d_2 = 110 \times (-100) = -11000 \), \( f_3 d_3 = 120 \times 0 = 0 \), \( f_4 d_4 = 70 \times 100 = 7000 \), \( f_5 d_5 = 40 \times 200 = 8000 \). — Reason: These products are needed to compute the weighted total deviation, which tells us how much the true mean differs from our assumed mean.
  5. Step 5: Sum all frequencies and all \( f_i d_i \) values separately. Total frequency: \[ \sum f_i = 80 + 110 + 120 + 70 + 40 = 420 \] Total weighted deviation: \[ \sum f_i d_i = -16000 + (-11000) + 0 + 7000 + 8000 = -12000 \] — Reason: These two sums are the only quantities needed to plug into the assumed mean formula.
  6. Step 6: Apply the assumed mean formula to find the mean toll. \[ \bar{x} = A + \frac{\sum f_i d_i}{\sum f_i} = 550 + \frac{-12000}{420} \] Simplifying the fraction: \[ \frac{-12000}{420} \approx -28.57 \] Therefore: \[ \bar{x} \approx 550 - 28.57 = 521.43 \] — Reason: Adding the average deviation back to the assumed mean gives the actual mean of the distribution.

Final Answer

The mean toll is approximately Rs. \( 521.43 \).

Common Mistake

One common mistake: Students sometimes forget that \( \sum f_i d_i \) can be negative (when most deviations are negative), and mistakenly add its absolute value instead of subtracting, leading to a mean that is too large.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Class marks: \ \( x_i = 350, 450, 550, 650, 750 \); Take \ \( A = 550 \); Deviations \ \( d_i = -200, -100, 0, 100, 200 \); Frequencies \ \( f_i = 80, 110, 120, 70, 40 \)
  2. Step 2: Compute \ \( f_i d_i \): \ \( 80 \times (-200) = -16000 \), \ \( 110 \times (-100) = -11000 \), \ \( 120 \times 0 = 0 \), \ \( 70 \times 100 = 7000 \), \ \( 40 \times 200 = 8000 \)
  3. Step 3: \( \sum f_i d_i = -16000 - 11000 + 0 + 7000 + 8000 = -12000 \); \( \sum f_i = 420 \)
  4. Step 4: \( \bar{x} = 550 + \frac{-12000}{420} = 550 - 28.57 = 521.43 \)

Answer: The mean toll is approximately Rs. \( 521.43 \).

➕ More Examples

More Examples

Example 1

Question: The following table shows the monthly electricity bill (in Rs.) paid by households in a colony and the number of households in each category. Find the mean electricity bill using the assumed mean method. \nBill (in Rs.) | Number of Households 100 – 200 | 5 200 – 300 | 12 300 – 400 | 18 400 – 500 | 10 500 – 600 | 5

Solution: Step 1: Find the midpoint \(x_i\) for each class. \nFor 100–200: \(x_1 = \dfrac{100+200}{2} = 150\) \nFor 200–300: \(x_2 = \dfrac{200+300}{2} = 250\) \nFor 300–400: \(x_3 = \dfrac{300+400}{2} = 350\) \nFor 400–500: \(x_4 = \dfrac{400+500}{2} = 450\) \nFor 500–600: \(x_5 = \dfrac{500+600}{2} = 550\) \nStep 2: Choose the assumed mean. Let \(A = 350\) (midpoint of the middle class). \nStep 3: Calculate \(d_i = x_i - A\) for each class. \(d_1 = 150 - 350 = -200\) \(d_2 = 250 - 350 = -100\) \(d_3 = 350 - 350 = 0\) \(d_4 = 450 - 350 = 100\) \(d_5 = 550 - 350 = 200\) \nStep 4: Calculate \(f_i d_i\) for each class. \(f_1 d_1 = 5 \times (-200) = -1000\) \(f_2 d_2 = 12 \times (-100) = -1200\) \(f_3 d_3 = 18 \times 0 = 0\) \(f_4 d_4 = 10 \times 100 = 1000\) \(f_5 d_5 = 5 \times 200 = 1000\) \nStep 5: Find the sums. \(\sum f_i = 5 + 12 + 18 + 10 + 5 = 50\) \(\sum f_i d_i = -1000 + (-1200) + 0 + 1000 + 1000 = -200\) \nStep 6: Apply the formula. \[\text{Mean} = A + \frac{\sum f_i d_i}{\sum f_i}\] \[\text{Mean} = 350 + \frac{-200}{50}\] \[\text{Mean} = 350 + (-4) = 346\]

Answer: The mean monthly electricity bill is Rs. 346.

Example 2

Question: The table below shows the time (in minutes) spent by students in a library during a weekend and the number of students in each group. Find the mean time spent using the assumed mean method. \nTime (in min) | Number of Students 10 – 20 | 4 20 – 30 | 9 30 – 40 | 15 40 – 50 | 8 50 – 60 | 4

Solution: Step 1: Find the midpoint \(x_i\) for each class. \nFor 10–20: \(x_1 = \dfrac{10+20}{2} = 15\) \nFor 20–30: \(x_2 = \dfrac{20+30}{2} = 25\) \nFor 30–40: \(x_3 = \dfrac{30+40}{2} = 35\) \nFor 40–50: \(x_4 = \dfrac{40+50}{2} = 45\) \nFor 50–60: \(x_5 = \dfrac{50+60}{2} = 55\) \nStep 2: Choose the assumed mean. Let \(A = 35\) (midpoint of the class with the highest frequency). \nStep 3: Calculate \(d_i = x_i - A\) for each class. \(d_1 = 15 - 35 = -20\) \(d_2 = 25 - 35 = -10\) \(d_3 = 35 - 35 = 0\) \(d_4 = 45 - 35 = 10\) \(d_5 = 55 - 35 = 20\) \nStep 4: Calculate \(f_i d_i\) for each class. \(f_1 d_1 = 4 \times (-20) = -80\) \(f_2 d_2 = 9 \times (-10) = -90\) \(f_3 d_3 = 15 \times 0 = 0\) \(f_4 d_4 = 8 \times 10 = 80\) \(f_5 d_5 = 4 \times 20 = 80\) \nStep 5: Find the sums. \(\sum f_i = 4 + 9 + 15 + 8 + 4 = 40\) \(\sum f_i d_i = -80 + (-90) + 0 + 80 + 80 = -10\) \nStep 6: Apply the formula. \[\text{Mean} = A + \frac{\sum f_i d_i}{\sum f_i}\] \[\text{Mean} = 35 + \frac{-10}{40}\] \[\text{Mean} = 35 + (-0.25) = 34.75\]

Answer: The mean time spent by students in the library is 34.75 minutes.

🎯 Try a Similar Question

Try a Similar Question

Question: The table below shows the monthly electricity bill (in Rs.) paid by households in a colony and the number of households in each category. Find the mean electricity bill using the 'assumed mean' method. \nBill (in Rs.) | Number of Households 100 – 200 | 5 200 – 300 | 18 300 – 400 | 27 400 – 500 | 30 500 – 600 | 14 600 – 700 | 6

Solution

  1. Step 1: Find the Class Midpoints: For each class interval, the midpoint is \( x_i = \frac{\text{lower limit} + \text{upper limit}}{2} \). \nClass 100–200: midpoint \( x_1 = 150 \)\nClass 200–300: midpoint \( x_2 = 250 \)\nClass 300–400: midpoint \( x_3 = 350 \)\nClass 400–500: midpoint \( x_4 = 450 \)\nClass 500–600: midpoint \( x_5 = 550 \)\nClass 600–700: midpoint \( x_6 = 650 \)
  2. Step 2: Choose the Assumed Mean: Select the midpoint of the class with the highest frequency as the assumed mean. The class 400–500 has the highest frequency (30), so we choose \( A = 450 \).
  3. Step 3: Compute Deviations: Calculate \( d_i = x_i - A = x_i - 450 \) for each class: \( d_1 = 150 - 450 = -300 \) \( d_2 = 250 - 450 = -200 \) \( d_3 = 350 - 450 = -100 \) \( d_4 = 450 - 450 = 0 \) \( d_5 = 550 - 450 = 100 \) \( d_6 = 650 - 450 = 200 \)
  4. Step 4: Compute f_i × d_i for Each Class: Multiply each frequency by the corresponding deviation: \nFor class 100–200: \( f_1 d_1 = 5 \times (-300) = -1500 \)\nFor class 200–300: \( f_2 d_2 = 18 \times (-200) = -3600 \)\nFor class 300–400: \( f_3 d_3 = 27 \times (-100) = -2700 \)\nFor class 400–500: \( f_4 d_4 = 30 \times 0 = 0 \)\nFor class 500–600: \( f_5 d_5 = 14 \times 100 = 1400 \)\nFor class 600–700: \( f_6 d_6 = 6 \times 200 = 1200 \)
  5. Step 5: Compute the Required Sums: Sum of all frequencies: \[ \sum f_i = 5 + 18 + 27 + 30 + 14 + 6 = 100 \] Sum of all \( f_i d_i \): \[ \sum f_i d_i = -1500 + (-3600) + (-2700) + 0 + 1400 + 1200 = -5200 \]
  6. Step 6: Apply the Assumed Mean Formula: Using the formula \( \bar{x} = A + \dfrac{\sum f_i d_i}{\sum f_i} \): \[ \bar{x} = 450 + \frac{-5200}{100} \] \[ \bar{x} = 450 + (-52) \] \[ \bar{x} = 398 \]

Answer: The mean monthly electricity bill is Rs. \( 398 \).

Everything you get with Solver7

More questions in Statistics

Chapter 6 Examples Q1 Practice Set 6.1 Q1 Practice Set 6.2 Q1 Practice Set 6.3 Q1 Practice Set 6.4 Q1 Practice Set 6.5 Q1 (i) Practice Set 6.6 Q1 Miscellaneous Problem Set 6 Q1 (i) 04/2019 2019 / Question 1 QA (i) 04/2019 2019 / Question 5 Q1 N362 2020 / Question 4 Q1 N384 2024 / Question 5 Q1 N384 2026 / Question 4 Q1 N619 2024 / Question 3 QA (i) N619 2024 / Question 5 Q1 (a) N919 2026 / Question 5 Q1 Chapter 6 Examples Q2 Practice Set 6.1 Q2 Practice Set 6.2 Q2 Practice Set 6.3 Q2 Practice Set 6.4 Q2 Practice Set 6.5 Q1 (ii) Practice Set 6.6 Q2 Miscellaneous Problem Set 6 Q1 (ii) 04/2019 2019 / Question 3 QA (ii) 04/2019 2019 / Question 6 Q2 (a) N384 2026 / Question 5 Q2 (a) N619 2024 / Question 4 Q2 N619 2024 / Question 5 Q1 (b) N819 2025 / Question 5 Q2 (a) N913 2023 / Question 4 Q2 N913 2023 / Question 5 Q2 Chapter 6 Examples Q3 Practice Set 6.1 Q3 Practice Set 6.2 Q3 Practice Set 6.3 Q3 Practice Set 6.4 Q3 Practice Set 6.5 Q1 (iii) Practice Set 6.6 Q3 Miscellaneous Problem Set 6 Q1 (iii) 04/2018 2018 / Question 5 Q3 04/2019 2019 / Question 6 Q2 (b) N384 2024 / Question 4 Q3 N384 2026 / Question 5 Q2 (b) N684 2025 / Question 2 QA (iii) N684 2025 / Question 3 QB (i) N684 2025 / Question 4 Q3 N819 2025 / Question 4 Q3 N819 2025 / Question 5 Q2 (b) Chapter 6 Examples Q4 Practice Set 6.1 Q4 Practice Set 6.2 Q4 Practice Set 6.3 Q4 Practice Set 6.4 Q4 Practice Set 6.5 Q1 (iv) Practice Set 6.6 Q4 Miscellaneous Problem Set 6 Q1 (iv) 04/2019 2019 / Question 6 Q2 (c) N384 2026 / Question 1 QA (iv) N384 2026 / Question 5 Q2 (c)