SOLVER7 Study. Nothing Else.
Miscellaneous Problem Set 6 Q9

Draw a histogram for the following frequency distribution.

MAH STATE BOARD Mah SB Class 10 Maths · Statistics

Solution

👶 Simple Explanation

Simple Explanation

Imagine drawing tall towers side by side, one for each group of families. Each tower shows how many families use a certain amount of electricity. Taller towers mean more families fall in that group. Here, we have 6 groups, and the tallest tower belongs to families using 130 to 150 units. Because the groups do not start from zero, we draw a little zigzag mark on the bottom line to show we skipped ahead to 50.

Answer: The histogram consists of 6 adjacent rectangles of equal width 20, with heights 150, 400, 460, 540, 600, and 350 corresponding to the class intervals 50-70, 70-90, 90-110, 110-130, 130-150, and 150-170 respectively. A kink is shown on the x-axis between 0 and 50.

📖 Histogram for Electricity Usage Data

Detailed Explanation

A histogram is a graphical representation of a grouped frequency distribution. It uses rectangles (bars) drawn without any gap between them, where the class intervals are marked on the x-axis and the corresponding frequencies are marked on the y-axis. Since all the class intervals in this data have the same width (20 units), the heights of the rectangles are directly proportional to the frequencies. Because our class intervals do not start from zero, we use a kink (zig-zag line) on the x-axis to indicate that the scale is broken between 0 and 50.

Formula Used

Height of each rectangle = Frequency of the class (when class widths are equal). If class widths are unequal, use Frequency Density = \( \dfrac{\text{Frequency}}{\text{Class Width}} \).

Solution

  1. Step 1: Organize the data: The given frequency distribution is: Class 50-70 has frequency 150, class 70-90 has frequency 400, class 90-110 has frequency 460, class 110-130 has frequency 540, class 130-150 has frequency 600, and class 150-170 has frequency 350. All classes have equal width of 20 units, so a simple histogram can be drawn.
  2. Step 2: Choose the axes and scale: Take Use of Electricity (in units) on the x-axis and Number of families on the y-axis. On the x-axis, mark the class intervals 50-70, 70-90, 90-110, 110-130, 130-150, 150-170. Since the data begins at 50 (not 0), draw a kink (zig-zag) between 0 and 50 on the x-axis. On the y-axis, choose a suitable scale, for example 1 cm = 100 families, so that the largest frequency 600 fits neatly.
  3. Step 3: Draw the rectangles: For each class interval, draw a rectangle whose width equals the class width (20 units) and whose height equals the frequency of that class. The rectangles are: 50-70 with height 150, 70-90 with height 400, 90-110 with height 460, 110-130 with height 540, 130-150 with height 600, 150-170 with height 350.
  4. Step 4: Ensure no gaps between bars: Since the class intervals are continuous (the upper limit of one class is the lower limit of the next), the rectangles must be drawn adjacent to each other with no gaps. This is a key feature that distinguishes a histogram from a bar graph.
  5. Step 5: Label the histogram: Give the histogram a title such as Histogram showing use of electricity by families. Label the x-axis as Use of electricity (in units) and the y-axis as Number of families. The tallest bar will be the one for class 130-150 with height 600, and the shortest bar will be for class 50-70 with height 150.

Final Answer

The histogram consists of 6 adjacent rectangles of equal width 20, with heights 150, 400, 460, 540, 600, and 350 corresponding to the class intervals 50-70, 70-90, 90-110, 110-130, 130-150, and 150-170 respectively. A kink is shown on the x-axis between 0 and 50.

Common Mistake

A very common mistake is leaving gaps between the rectangles (which would make it a bar graph, not a histogram) or forgetting to show the kink on the x-axis when the first class does not start from zero, which distorts the correct visual representation of the data.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: List the given data clearly: Write out the frequency distribution table: Class 50–70 has frequency 150, class 70–90 has frequency 400, class 90–110 has frequency 460, class 110–130 has frequency 540, class 130–150 has frequency 600, and class 150–170 has frequency 350. — Reason: Organising the data first prevents errors when plotting and makes it easy to see that all class widths are equal to \( 20 \) units.
  2. Step 2: Check whether class widths are equal: Calculate the width of each class: \( 70 - 50 = 20 \), \( 90 - 70 = 20 \), and so on — every interval has width \( 20 \). — Reason: If all widths are equal, the frequency itself can be used directly as the height of each rectangle, which simplifies drawing the histogram.
  3. Step 3: Set up the axes: Draw the x-axis to represent 'Use of Electricity (in units)' and the y-axis to represent 'Number of Families'. Choose a suitable scale on the y-axis, for example \( 1 \) cm = \( 100 \) families, so the tallest bar (height \( 600 \)) fits neatly on the graph. — Reason: A well-chosen scale ensures all bars are clearly visible and the graph is easy to read.
  4. Step 4: Mark the kink on the x-axis: Since the class intervals begin at \( 50 \) and not at \( 0 \), draw a zig-zag break (kink) on the x-axis between \( 0 \) and \( 50 \). — Reason: The kink signals to the reader that the x-axis scale is not continuous from zero, preventing misinterpretation of the graph.
  5. Step 5: Mark the class boundaries on the x-axis: Starting from \( 50 \), mark the points \( 50, 70, 90, 110, 130, 150, 170 \) at equal spacing on the x-axis. These boundary points define the base of each rectangle. — Reason: Each pair of consecutive boundary points forms the base (width = \( 20 \)) of one rectangle.
  6. Step 6: Draw the six rectangles: For each class interval, draw an adjacent rectangle (no gap between bars) whose height equals the class frequency: over 50–70 draw height \( 150 \), over 70–90 draw height \( 400 \), over 90–110 draw height \( 460 \), over 110–130 draw height \( 540 \), over 130–150 draw height \( 600 \), and over 150–170 draw height \( 350 \). — Reason: Since class widths are all equal to \( 20 \), frequency is directly proportional to the area of each rectangle, so height = frequency is a valid and accurate representation.
  7. Step 7: Label the graph: Write a title such as 'Histogram of Electricity Consumption', label the x-axis 'Use of Electricity (in units)', and label the y-axis 'Number of Families'. — Reason: Clear labels make the histogram self-explanatory and are required in examination answers for full marks.

Final Answer

The histogram consists of 6 adjacent rectangles of equal width 20, with heights 150, 400, 460, 540, 600, and 350 corresponding to the class intervals 50-70, 70-90, 90-110, 110-130, 130-150, and 150-170 respectively. A kink is shown on the x-axis between 0 and 50.

Common Mistake

One common mistake: Students forget to draw the kink (zig-zag break) on the x-axis when the data does not start from zero — this omission gives the false impression that the scale runs continuously from 0 to 50, misleading anyone reading the graph.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given data (class width = 20 for all): 50–70 → 150, 70–90 → 400, 90–110 → 460, 110–130 → 540, 130–150 → 600, 150–170 → 350
  2. Step 2: x-axis: Use of Electricity (units), mark intervals 50–70, 70–90, 90–110, 110–130, 130–150, 150–170; draw a kink between 0 and 50.
  3. Step 3: y-axis: Number of families; plot rectangle heights directly as frequencies: \(150, 400, 460, 540, 600, 350\).

Answer: The histogram consists of 6 adjacent rectangles of equal width 20, with heights 150, 400, 460, 540, 600, and 350 corresponding to the class intervals 50-70, 70-90, 90-110, 110-130, 130-150, and 150-170 respectively. A kink is shown on the x-axis between 0 and 50.

➕ More Examples

More Examples

Example 1

Question: The following table shows the marks obtained by 50 students in a class test. Draw a histogram to represent this data. \nMarks: 10–20, 20–30, 30–40, 40–50, 50–60\nNumber of Students: 5, 12, 20, 8, 5

Solution: We are given equal class widths of 10 throughout, so the height of each bar equals the frequency directly. \nClass intervals and frequencies: \nMarks 10–20: Frequency = 5\nMarks 20–30: Frequency = 12\nMarks 30–40: Frequency = 20\nMarks 40–50: Frequency = 8\nMarks 50–60: Frequency = 5 \nTotal number of students: \[5 + 12 + 20 + 8 + 5 = 50\] \nSteps to draw the histogram: 1. Draw the x-axis and mark it 'Marks Obtained'. Mark the class intervals 10–20, 20–30, 30–40, 40–50, 50–60 on it. 2. Draw the y-axis and mark it 'Number of Students'. Choose a scale, for example, 1 unit = 2 students, so mark 0, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20. 3. Draw adjacent bars for each class interval: - Bar for 10–20 with height = 5 - Bar for 20–30 with height = 12 - Bar for 30–40 with height = 20 - Bar for 40–50 with height = 8 - Bar for 50–60 with height = 5 4. Since all class widths are equal (each = 10), no adjustment is needed for the heights. 5. The tallest bar corresponds to the class interval 30–40, showing the highest frequency of 20 students. \nThe histogram is now complete with all bars drawn adjacent to each other, representing the continuous distribution of marks.

Answer: Histogram drawn with bars of heights 5, 12, 20, 8, 5 for class intervals 10–20, 20–30, 30–40, 40–50, 50–60 respectively.

Example 2

Question: The ages (in years) of patients admitted to a hospital in a week are recorded below. Draw a histogram for the following frequency distribution. \nAge (in years): 5–15, 15–25, 25–35, 35–45, 45–55, 55–65\nNumber of Patients: 6, 11, 21, 23, 14, 5

Solution: We are given equal class widths of 10 throughout, so the height of each bar equals the frequency directly. \nClass intervals and frequencies: \nAge 5–15: Frequency = 6\nAge 15–25: Frequency = 11\nAge 25–35: Frequency = 21\nAge 35–45: Frequency = 23\nAge 45–55: Frequency = 14\nAge 55–65: Frequency = 5 \nTotal number of patients: \[6 + 11 + 21 + 23 + 14 + 5 = 80\] \nSteps to draw the histogram: 1. Draw the x-axis and label it 'Age (in years)'. Mark the class intervals 5–15, 15–25, 25–35, 35–45, 45–55, 55–65 on it. 2. Draw the y-axis and label it 'Number of Patients'. Choose a scale, for example, 1 unit = 2 patients, so mark 0, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24. 3. Draw adjacent bars for each class interval: - Bar for 5–15 with height = 6 - Bar for 15–25 with height = 11 - Bar for 25–35 with height = 21 - Bar for 35–45 with height = 23 - Bar for 45–55 with height = 14 - Bar for 55–65 with height = 5 4. All class widths are equal (each = 10), so no modification to heights is required. 5. The tallest bar is for the age group 35–45, with a frequency of 23 patients, indicating the most common age group among the admitted patients. \nThe histogram is now complete with six adjacent bars representing the age distribution of patients.

Answer: Histogram drawn with bars of heights 6, 11, 21, 23, 14, 5 for class intervals 5–15, 15–25, 25–35, 35–45, 45–55, 55–65 respectively.

🎯 Try a Similar Question

Try a Similar Question

Question: Draw a histogram for the following frequency distribution of the marks scored by students in a school test: \nMarks: 10–25, 25–40, 40–55, 55–70, 70–85, 85–100\nNumber of Students: 80, 210, 360, 420, 290, 140 \nAlso show a kink on the x-axis between 0 and 10.

Solution

  1. Step 1: Identify Class Intervals and Frequencies: List the class intervals and their corresponding frequencies: \nClass interval 10–25: frequency = 80\nClass interval 25–40: frequency = 210\nClass interval 40–55: frequency = 360\nClass interval 55–70: frequency = 420\nClass interval 70–85: frequency = 290\nClass interval 85–100: frequency = 140
  2. Step 2: Find the Width of Each Class Interval: Each class interval has width = Upper boundary − Lower boundary. For example, for the first class: \ width = 25 − 10 = 15. Since all class intervals have the same width of 15, all rectangles will have equal width.
  3. Step 3: Set Up the Axes: On the x-axis, mark the class boundaries: 10, 25, 40, 55, 70, 85, 100. Since the data starts at 10 (not 0), draw a kink (zigzag break) on the x-axis between 0 and 10 to indicate that the scale does not begin from zero. On the y-axis, mark the number of students. Choose a suitable scale, for example, each division = 50 students, so the y-axis goes from 0 to at least 420.
  4. Step 4: Draw the Rectangles: Draw 6 adjacent rectangles (no gaps between them) with the following heights: \nFor marks 10–25: height = 80\nFor marks 25–40: height = 210\nFor marks 40–55: height = 360\nFor marks 55–70: height = 420\nFor marks 70–85: height = 290\nFor marks 85–100: height = 140 \nThe width of each rectangle spans one class interval of length 15 on the x-axis.
  5. Step 5: Label the Histogram: Label the x-axis as 'Marks' and the y-axis as 'Number of Students'. Give the histogram a suitable title such as 'Histogram of Marks Scored by Students'.

Answer: The histogram consists of 6 adjacent rectangles of equal width 15, with heights 80, 210, 360, 420, 290, and 140 corresponding to the class intervals 10–25, 25–40, 40–55, 55–70, 70–85, and 85–100 respectively. A kink is shown on the x-axis between 0 and 10.

Everything you get with Solver7

More questions in Statistics

Chapter 6 Examples Q1 Practice Set 6.1 Q1 Practice Set 6.2 Q1 Practice Set 6.3 Q1 Practice Set 6.4 Q1 Practice Set 6.5 Q1 (i) Practice Set 6.6 Q1 Miscellaneous Problem Set 6 Q1 (i) 04/2019 2019 / Question 1 QA (i) 04/2019 2019 / Question 5 Q1 N362 2020 / Question 4 Q1 N384 2024 / Question 5 Q1 N384 2026 / Question 4 Q1 N619 2024 / Question 3 QA (i) N619 2024 / Question 5 Q1 (a) N919 2026 / Question 5 Q1 Chapter 6 Examples Q2 Practice Set 6.1 Q2 Practice Set 6.2 Q2 Practice Set 6.3 Q2 Practice Set 6.4 Q2 Practice Set 6.5 Q1 (ii) Practice Set 6.6 Q2 Miscellaneous Problem Set 6 Q1 (ii) 04/2019 2019 / Question 3 QA (ii) 04/2019 2019 / Question 6 Q2 (a) N384 2026 / Question 5 Q2 (a) N619 2024 / Question 4 Q2 N619 2024 / Question 5 Q1 (b) N819 2025 / Question 5 Q2 (a) N913 2023 / Question 4 Q2 N913 2023 / Question 5 Q2 Chapter 6 Examples Q3 Practice Set 6.1 Q3 Practice Set 6.2 Q3 Practice Set 6.3 Q3 Practice Set 6.4 Q3 Practice Set 6.5 Q1 (iii) Practice Set 6.6 Q3 Miscellaneous Problem Set 6 Q1 (iii) 04/2018 2018 / Question 5 Q3 04/2019 2019 / Question 6 Q2 (b) N384 2024 / Question 4 Q3 N384 2026 / Question 5 Q2 (b) N684 2025 / Question 2 QA (iii) N684 2025 / Question 3 QB (i) N684 2025 / Question 4 Q3 N819 2025 / Question 4 Q3 N819 2025 / Question 5 Q2 (b) Chapter 6 Examples Q4 Practice Set 6.1 Q4 Practice Set 6.2 Q4 Practice Set 6.3 Q4 Practice Set 6.4 Q4 Practice Set 6.5 Q1 (iv) Practice Set 6.6 Q4 Miscellaneous Problem Set 6 Q1 (iv) 04/2019 2019 / Question 6 Q2 (c) N384 2026 / Question 1 QA (iv) N384 2026 / Question 5 Q2 (c)