SOLVER7 Study. Nothing Else.
Chapter 6 Examples Q6

The amount invested in health insurance by \(100\) families is given in the following frequency table. Find the mean of investments using step deviation method.

MAH STATE BOARD Mah SB Class 10 Maths · Statistics

Solution

👶 Simple Explanation

Simple Explanation

Imagine you want to find the favourite pocket money amount among 100 students. Adding up huge numbers is tiring. So you pick a middle amount as a guess. You check how far each group is from your guess. Some groups are above, some are below. The differences cancel out nicely. A small adjustment to your guess gives the true average. Here, the guess was Rs. 2200, and after a tiny correction of Rs. 60, the real average turned out to be Rs. 2140. Smart guessing saves lots of hard work!

Answer: The mean investment is \(\bar{x} = \rupee\, 2140\) (approximately Rs. 2140).

📖 Mean by Step Deviation Method

Detailed Explanation

When class intervals are of equal width and the mid-values are large numbers, the step deviation method makes the calculation of the mean easier. We pick an assumed mean \(a\) from the mid-values, compute the deviation of each mid-value from \(a\), divide by the common class width \(h\) to get \(u_i = \dfrac{x_i - a}{h}\), and then use the formula for the mean. This reduces the arithmetic to small integers.

Formula Used

\[ \bar{x} = a + h \cdot \dfrac{\sum f_i u_i}{\sum f_i}, \quad u_i = \dfrac{x_i - a}{h} \]

Solution

  1. Step 1: Find mid-values of each class: The class width is \(h = 400\). Mid-values \(x_i\) are: 1000, 1400, 1800, 2200, 2600, 3000.
  2. Step 2: Choose assumed mean and compute \(u_i\): Let assumed mean \(a = 2200\). Then \(u_i = \dfrac{x_i - 2200}{400}\), giving \(u_i = -3, -2, -1, 0, 1, 2\) for the six classes respectively.
  3. Step 3: Compute \(f_i u_i\) for each class: Class 800-1200: \(f = 3, u = -3, fu = -9\). Class 1200-1600: \(f = 15, u = -2, fu = -30\). Class 1600-2000: \(f = 20, u = -1, fu = -20\). Class 2000-2400: \(f = 25, u = 0, fu = 0\). Class 2400-2800: \(f = 30, u = 1, fu = 30\). Class 2800-3200: \(f = 7, u = 2, fu = 14\).
  4. Step 4: Find the totals: \[ \sum f_i = 3+15+20+25+30+7 = 100 \] \[ \sum f_i u_i = -9-30-20+0+30+14 = -15 \]
  5. Step 5: Apply the step deviation formula: \[ \bar{x} = a + h \cdot \dfrac{\sum f_i u_i}{\sum f_i} = 2200 + 400 \cdot \dfrac{-15}{100} \] \[ \bar{x} = 2200 - 60 = 2140 \]

Final Answer

The mean investment is \(\bar{x} = \rupee\, 2140\) (approximately Rs. 2140).

Common Mistake

A common mistake is forgetting to multiply by the class width \(h\) after computing \(\dfrac{\sum f_i u_i}{\sum f_i}\). Students often add this ratio directly to the assumed mean, which gives an incorrect answer.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Find the mid-value \( x_i \) of each class interval using \( x_i = \dfrac{\text{lower limit} + \text{upper limit}}{2} \). The class width is \( h = 1200 - 800 = 400 \). The six mid-values are: \( x_i = 1000, 1400, 1800, 2200, 2600, 3000 \). — Reason: Mid-values represent each class and are needed to compute deviations.
  2. Step 2: Choose an assumed mean \( a \). Here we pick \( a = 2200 \) (the mid-value near the centre of the distribution). — Reason: Choosing a central value keeps the step deviations small and the arithmetic easy.
  3. Step 3: Compute the step deviation \( u_i \) for each class using \( u_i = \dfrac{x_i - 2200}{400} \). The values are: for \( x_i = 1000 \), \( u_i = -3 \); for \( x_i = 1400 \), \( u_i = -2 \); for \( x_i = 1800 \), \( u_i = -1 \); for \( x_i = 2200 \), \( u_i = 0 \); for \( x_i = 2600 \), \( u_i = 1 \); for \( x_i = 3000 \), \( u_i = 2 \). — Reason: Dividing by \( h \) converts large mid-values into small integers, making multiplication with frequencies much simpler.
  4. Step 4: Multiply each frequency \( f_i \) by its corresponding \( u_i \) to get \( f_i u_i \): for class 800–1200, \( f = 3,\; u = -3,\; f_i u_i = -9 \); for class 1200–1600, \( f = 15,\; u = -2,\; f_i u_i = -30 \); for class 1600–2000, \( f = 20,\; u = -1,\; f_i u_i = -20 \); for class 2000–2400, \( f = 25,\; u = 0,\; f_i u_i = 0 \); for class 2400–2800, \( f = 30,\; u = 1,\; f_i u_i = 30 \); for class 2800–3200, \( f = 7,\; u = 2,\; f_i u_i = 14 \). — Reason: The product \( f_i u_i \) measures how much each class contributes to the overall deviation from the assumed mean.
  5. Step 5: Find the two required totals. Adding all frequencies: \[ \sum f_i = 3 + 15 + 20 + 25 + 30 + 7 = 100 \] Adding all \( f_i u_i \) values: \[ \sum f_i u_i = -9 + (-30) + (-20) + 0 + 30 + 14 = -15 \] — Reason: These totals are the only two quantities needed to plug into the step deviation formula.
  6. Step 6: Substitute into the step deviation formula to find the mean. \[ \bar{x} = a + h \cdot \frac{\sum f_i u_i}{\sum f_i} = 2200 + 400 \times \frac{-15}{100} \] Simplifying: \[ \bar{x} = 2200 + 400 \times (-0.15) = 2200 - 60 = 2140 \] — Reason: This final substitution 'undoes' the step deviation transformation and gives us the actual mean in the original units.

Final Answer

The mean investment is \(\bar{x} = \rupee\, 2140\) (approximately Rs. 2140).

Common Mistake

One common mistake: Students sometimes forget the sign of \( \sum f_i u_i \). Here \( \sum f_i u_i = -15 \) (negative), so the correction term \( 400 \times \dfrac{-15}{100} = -60 \) must be subtracted from \( a \), giving 2140. Writing it as \( +60 \) and arriving at 2260 is a frequent error.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Mid-values: 1000, 1400, 1800, 2200, 2600, 3000; class width \( h = 400 \); assumed mean \( a = 2200 \).
  2. Step 2: \( u_i \) values: \(-3, -2, -1, 0, 1, 2 \); frequencies: 3, 15, 20, 25, 30, 7; \( f_i u_i \) values: \(-9, -30, -20, 0, 30, 14 \).
  3. Step 3: \( \sum f_i = 100 \), \( \sum f_i u_i = -15 \).
  4. Step 4: \[ \bar{x} = 2200 + 400 \cdot \dfrac{-15}{100} = 2200 - 60 = 2140 \]

Answer: The mean investment is \(\bar{x} = \rupee\, 2140\) (approximately Rs. 2140).

➕ More Examples

More Examples

Example 1

Question: The monthly electricity consumption (in units) of 80 households in a colony is given below. Find the mean consumption using the step deviation method. \nClass Interval: 50–100, 100–150, 150–200, 200–250, 250–300\nFrequency: 10, 18, 22, 20, 10

Solution: Step 1 – Find the class midpoints \( x_i \). \nMidpoints: \( x_1 = 75,\; x_2 = 125,\; x_3 = 175,\; x_4 = 225,\; x_5 = 275 \) \nStep 2 – Choose the assumed mean and class width. \nAssumed mean \( A = 175 \) (midpoint of the middle class), class width \( h = 50 \). \nStep 3 – Compute \( u_i = \dfrac{x_i - A}{h} \) for each class. \[ u_1 = \frac{75 - 175}{50} = -2 \] \[ u_2 = \frac{125 - 175}{50} = -1 \] \[ u_3 = \frac{175 - 175}{50} = 0 \] \[ u_4 = \frac{225 - 175}{50} = 1 \] \[ u_5 = \frac{275 - 175}{50} = 2 \] \nStep 4 – Compute \( f_i u_i \) for each class. \[ f_1 u_1 = 10 \times (-2) = -20 \] \[ f_2 u_2 = 18 \times (-1) = -18 \] \[ f_3 u_3 = 22 \times 0 = 0 \] \[ f_4 u_4 = 20 \times 1 = 20 \] \[ f_5 u_5 = 10 \times 2 = 20 \] \nStep 5 – Compute the sums. \[ \sum f_i = 10 + 18 + 22 + 20 + 10 = 80 \] \[ \sum f_i u_i = -20 + (-18) + 0 + 20 + 20 = 2 \] \nStep 6 – Apply the formula. \[ \text{Mean} = A + \left( \frac{\sum f_i u_i}{\sum f_i} \right) \times h \] \[ \text{Mean} = 175 + \left( \frac{2}{80} \right) \times 50 \] \[ \text{Mean} = 175 + 0.025 \times 50 \] \[ \text{Mean} = 175 + 1.25 = 176.25 \]

Answer: Mean monthly electricity consumption = 176.25 units

Example 2

Question: The weekly pocket money (in rupees) given to 60 students is recorded in the table below. Find the mean pocket money using the step deviation method. \nClass Interval: 100–150, 150–200, 200–250, 250–300, 300–350, 350–400\nFrequency: 6, 10, 15, 14, 9, 6

Solution: Step 1 – Find the class midpoints \( x_i \). \nMidpoints: \( x_1 = 125,\; x_2 = 175,\; x_3 = 225,\; x_4 = 275,\; x_5 = 325,\; x_6 = 375 \) \nStep 2 – Choose the assumed mean and class width. \nAssumed mean \( A = 250 \) (near the centre of the distribution), class width \( h = 50 \). \nStep 3 – Compute \( u_i = \dfrac{x_i - A}{h} \) for each class. \[ u_1 = \frac{125 - 250}{50} = -2.5 \] \[ u_2 = \frac{175 - 250}{50} = -1.5 \] \[ u_3 = \frac{225 - 250}{50} = -0.5 \] \[ u_4 = \frac{275 - 250}{50} = 0.5 \] \[ u_5 = \frac{325 - 250}{50} = 1.5 \] \[ u_6 = \frac{375 - 250}{50} = 2.5 \] \nStep 4 – Compute \( f_i u_i \) for each class. \[ f_1 u_1 = 6 \times (-2.5) = -15 \] \[ f_2 u_2 = 10 \times (-1.5) = -15 \] \[ f_3 u_3 = 15 \times (-0.5) = -7.5 \] \[ f_4 u_4 = 14 \times 0.5 = 7 \] \[ f_5 u_5 = 9 \times 1.5 = 13.5 \] \[ f_6 u_6 = 6 \times 2.5 = 15 \] \nStep 5 – Compute the sums. \[ \sum f_i = 6 + 10 + 15 + 14 + 9 + 6 = 60 \] \[ \sum f_i u_i = -15 + (-15) + (-7.5) + 7 + 13.5 + 15 = -2 \] \nStep 6 – Apply the formula. \[ \text{Mean} = A + \left( \frac{\sum f_i u_i}{\sum f_i} \right) \times h \] \[ \text{Mean} = 250 + \left( \frac{-2}{60} \right) \times 50 \] \[ \text{Mean} = 250 + \left( -\frac{100}{60} \right) \] \[ \text{Mean} = 250 - 1.\overline{6} \approx 248.33 \]

Answer: Mean weekly pocket money \( \approx \) Rs 248.33

🎯 Try a Similar Question

Try a Similar Question

Question: The monthly electricity bills (in Rs.) paid by 80 households in a colony are recorded in the following frequency table. Find the mean electricity bill using the step deviation method. \nMonthly Bill (Rs.) | Number of Households 500 – 1000 | 6 1000 – 1500 | 11 1500 – 2000 | 20 2000 – 2500 | 25 2500 – 3000 | 12 3000 – 3500 | 6

Solution

  1. Step 1: Find class midpoints: Calculate the midpoint \(x_i\) for each class interval. \nFor 500–1000: \(x_1 = \frac{500+1000}{2} = 750\) \nFor 1000–1500: \(x_2 = \frac{1000+1500}{2} = 1250\) \nFor 1500–2000: \(x_3 = \frac{1500+2000}{2} = 1750\) \nFor 2000–2500: \(x_4 = \frac{2000+2500}{2} = 2250\) \nFor 2500–3000: \(x_5 = \frac{2500+3000}{2} = 2750\) \nFor 3000–3500: \(x_6 = \frac{3000+3500}{2} = 3250\)
  2. Step 2: Choose assumed mean and class width: Choose the assumed mean \(A = 2250\) (midpoint of the class with the highest frequency) and class width \(h = 500\).
  3. Step 3: Compute step deviations: The step deviation is \(u_i = \frac{x_i - A}{h} = \frac{x_i - 2250}{500}\). \nFor \(x_1 = 750\): \(u_1 = \frac{750 - 2250}{500} = \frac{-1500}{500} = -3\) \nFor \(x_2 = 1250\): \(u_2 = \frac{1250 - 2250}{500} = \frac{-1000}{500} = -2\) \nFor \(x_3 = 1750\): \(u_3 = \frac{1750 - 2250}{500} = \frac{-500}{500} = -1\) \nFor \(x_4 = 2250\): \(u_4 = \frac{2250 - 2250}{500} = 0\) \nFor \(x_5 = 2750\): \(u_5 = \frac{2750 - 2250}{500} = 1\) \nFor \(x_6 = 3250\): \(u_6 = \frac{3250 - 2250}{500} = 2\)
  4. Step 4: Compute f_i u_i for each class: Multiply each frequency by its step deviation. \nClass 500–1000: \(f_1 u_1 = 6 \times (-3) = -18\) \nClass 1000–1500: \(f_2 u_2 = 11 \times (-2) = -22\) \nClass 1500–2000: \(f_3 u_3 = 20 \times (-1) = -20\) \nClass 2000–2500: \(f_4 u_4 = 25 \times 0 = 0\) \nClass 2500–3000: \(f_5 u_5 = 12 \times 1 = 12\) \nClass 3000–3500: \(f_6 u_6 = 6 \times 2 = 12\)
  5. Step 5: Sum up frequencies and f_i u_i: Total number of households: \(\sum f_i = 6 + 11 + 20 + 25 + 12 + 6 = 80\) \nSum of step deviations weighted by frequency: \(\sum f_i u_i = -18 + (-22) + (-20) + 0 + 12 + 12 = -36\)
  6. Step 6: Apply the step deviation formula: Using the formula \(\bar{x} = A + \left(\frac{\sum f_i u_i}{\sum f_i}\right) \times h\): \[\bar{x} = 2250 + \left(\frac{-36}{80}\right) \times 500\] \[\bar{x} = 2250 + (-0.45) \times 500\] \[\bar{x} = 2250 - 225 = 2025\]

Answer: The mean monthly electricity bill is \(\bar{x} = \text{Rs. } 2025\).

Everything you get with Solver7

More questions in Statistics

Chapter 6 Examples Q1 Practice Set 6.1 Q1 Practice Set 6.2 Q1 Practice Set 6.3 Q1 Practice Set 6.4 Q1 Practice Set 6.5 Q1 (i) Practice Set 6.6 Q1 Miscellaneous Problem Set 6 Q1 (i) 04/2019 2019 / Question 1 QA (i) 04/2019 2019 / Question 5 Q1 N362 2020 / Question 4 Q1 N384 2024 / Question 5 Q1 N384 2026 / Question 4 Q1 N619 2024 / Question 3 QA (i) N619 2024 / Question 5 Q1 (a) N919 2026 / Question 5 Q1 Chapter 6 Examples Q2 Practice Set 6.1 Q2 Practice Set 6.2 Q2 Practice Set 6.3 Q2 Practice Set 6.4 Q2 Practice Set 6.5 Q1 (ii) Practice Set 6.6 Q2 Miscellaneous Problem Set 6 Q1 (ii) 04/2019 2019 / Question 3 QA (ii) 04/2019 2019 / Question 6 Q2 (a) N384 2026 / Question 5 Q2 (a) N619 2024 / Question 4 Q2 N619 2024 / Question 5 Q1 (b) N819 2025 / Question 5 Q2 (a) N913 2023 / Question 4 Q2 N913 2023 / Question 5 Q2 Chapter 6 Examples Q3 Practice Set 6.1 Q3 Practice Set 6.2 Q3 Practice Set 6.3 Q3 Practice Set 6.4 Q3 Practice Set 6.5 Q1 (iii) Practice Set 6.6 Q3 Miscellaneous Problem Set 6 Q1 (iii) 04/2018 2018 / Question 5 Q3 04/2019 2019 / Question 6 Q2 (b) N384 2024 / Question 4 Q3 N384 2026 / Question 5 Q2 (b) N684 2025 / Question 2 QA (iii) N684 2025 / Question 3 QB (i) N684 2025 / Question 4 Q3 N819 2025 / Question 4 Q3 N819 2025 / Question 5 Q2 (b) Chapter 6 Examples Q4 Practice Set 6.1 Q4 Practice Set 6.2 Q4 Practice Set 6.3 Q4 Practice Set 6.4 Q4 Practice Set 6.5 Q1 (iv) Practice Set 6.6 Q4 Miscellaneous Problem Set 6 Q1 (iv) 04/2019 2019 / Question 6 Q2 (c) N384 2026 / Question 1 QA (iv) N384 2026 / Question 5 Q2 (c)