SOLVER7 Study. Nothing Else.
Chapter 6 Examples Q16 (iv)

Answer the following questions based on the frequency polygon given in the adjacent figure.
Write the class in which the frequency is maximum.

MAH STATE BOARD Mah SB Class 10 Maths · Statistics

Solution

👶 Simple Explanation

Simple Explanation

Imagine a connect-the-dots picture made from a chart of donations. Each dot sits higher when more people donated that amount. The tallest dot is like the tallest mountain peak on the picture. Here, the tallest dot reaches up to 20, which is the highest count of all. That dot sits above the number 35 on the bottom line. Since each group spans 10 rupees, the group around 35 goes from 30 to 40. So the 30 to 40 group had the most donors.

Answer: The class with maximum frequency is 30 – 40 (with frequency 20).

📖 Class with Maximum Frequency from Frequency Polygon

Detailed Explanation

A frequency polygon is a graph that shows the frequency distribution of grouped data. Each point on the polygon is plotted using the class mark (midpoint of a class interval) on the X-axis and its corresponding frequency on the Y-axis. To find the class with the maximum frequency, we look for the highest point (peak) on the polygon. The X-coordinate of that peak gives the class mark, and from the class mark we can identify the actual class interval. Here, the X-axis represents rupees (donations) and the Y-axis represents the number of funds (frequency).

Formula Used

Class mark \( = \dfrac{\text{Lower limit} + \text{Upper limit}}{2} \), so if class width is \( h \), the class interval is from \( \text{class mark} - \dfrac{h}{2} \) to \( \text{class mark} + \dfrac{h}{2} \).

Solution

  1. Step 1: Identify the peak point: From the frequency polygon, the plotted points are (15, 8), (25, 14), (35, 20), (45, 16) and (55, 10). The highest frequency value is 20, which occurs at the point (35, 20).
  2. Step 2: Read the class mark: The X-coordinate of the peak is 35. This means the class mark of the class having maximum frequency is 35.
  3. Step 3: Determine the class width: The consecutive class marks are 15, 25, 35, 45, 55. The difference between any two consecutive class marks is \( 25 - 15 = 10 \). So the class width is \( h = 10 \).
  4. Step 4: Find the class interval: The class interval whose class mark is 35 is obtained as \[ \left(35 - \dfrac{10}{2},\ 35 + \dfrac{10}{2}\right) = (30,\ 40). \] Hence the required class is 30 – 40.
  5. Step 5: State the conclusion: The maximum frequency in the polygon is 20 (number of funds), and it corresponds to the class 30 – 40 rupees.

Final Answer

The class with maximum frequency is 30 – 40 (with frequency 20).

Common Mistake

A common mistake is to write the class mark (35) itself as the answer instead of the class interval. Remember, in a frequency polygon the points are plotted at class marks, so you must convert the class mark back to the class interval using the class width.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: List all plotted points from the frequency polygon: \( (15, 8) \), \( (25, 14) \), \( (35, 20) \), \( (45, 16) \), and \( (55, 10) \). — Reason: Each point is of the form (class mark, frequency), so reading all points gives us the complete frequency distribution to work with.
  2. Step 2: Scan the Y-values (frequencies) to find the largest one. The frequencies are 8, 14, 20, 16, and 10. The greatest value is 20, which belongs to the point \( (35, 20) \). — Reason: The peak point of the polygon is where frequency is highest, and that is exactly the class we want to identify.
  3. Step 3: Read the X-coordinate of the peak point. Since the peak is \( (35, 20) \), the class mark of the required class is \( 35 \). — Reason: On a frequency polygon the X-axis carries the class marks, so the X-coordinate directly gives us the midpoint of the class interval we need.
  4. Step 4: Find the class width \( h \) by subtracting any two consecutive class marks. Using the first two class marks: \[ h = 25 - 15 = 10 \] — Reason: Knowing the class width lets us reconstruct the full class interval from just its midpoint.
  5. Step 5: Calculate half the class width: \( \dfrac{h}{2} = \dfrac{10}{2} = 5 \). Then find the class interval by subtracting and adding this value from the class mark \( 35 \): \[ \text{Lower limit} = 35 - 5 = 30 \] \[ \text{Upper limit} = 35 + 5 = 40 \] So the class interval is \( 30 - 40 \). — Reason: The class mark is always the exact midpoint, so moving half a class width in each direction gives the true boundaries of the class.
  6. Step 6: Verify: the midpoint of \( 30 - 40 \) is \( \dfrac{30 + 40}{2} = \dfrac{70}{2} = 35 \), which matches the X-coordinate of the peak. The frequency for this class is \( 20 \), which is indeed the highest among all classes. — Reason: A quick check confirms that our recovered class interval is consistent with both the class mark and the maximum frequency observed.

Final Answer

The class with maximum frequency is 30 – 40 (with frequency 20).

Common Mistake

One common mistake: students sometimes read the X-coordinate of the peak and report it (35) as the answer, forgetting that 35 is only the class mark (midpoint) and not the class interval itself. Always use the class width to recover the actual class interval (30 – 40).

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Plotted points: \( (15, 8),\ (25, 14),\ (35, 20),\ (45, 16),\ (55, 10) \). Peak point: \( (35, 20) \), so maximum frequency \( = 20 \) at class mark \( = 35 \).
  2. Step 2: Class width: \( h = 25 - 15 = 10 \).
  3. Step 3: Class interval with class mark 35: \[ \left(35 - \frac{10}{2},\ 35 + \frac{10}{2}\right) = (30,\ 40) \]

Answer: The class with maximum frequency is 30 – 40 (with frequency 20).

➕ More Examples

More Examples

Example 1

Question: The following data represents the frequencies read from a frequency polygon for marks obtained by students in a test. The class marks (midpoints) and their corresponding frequencies are: \(15\) → \(4\), \(25\) → \(10\), \(35\) → \(18\), \(45\) → \(26\), \(55\) → \(14\), \(65\) → \(8\). Identify the class interval in which the frequency is maximum.

Solution: Step 1: List all class marks and their frequencies. Class mark \(15\) has frequency \(4\), class mark \(25\) has frequency \(10\), class mark \(35\) has frequency \(18\), class mark \(45\) has frequency \(26\), class mark \(55\) has frequency \(14\), class mark \(65\) has frequency \(8\). Step 2: Identify the highest frequency. The maximum frequency is \(26\), which corresponds to class mark \(45\). Step 3: Find the class interval for class mark \(45\). Since the class width is \(10\), the class interval is \(40 - 50\). Using the midpoint formula: Lower Limit \(= 45 - 5 = 40\), Upper Limit \(= 45 + 5 = 50\). Therefore, the class interval with maximum frequency is \(40 - 50\).

Answer: The class with maximum frequency is \(40 - 50\).

Example 2

Question: A frequency polygon is drawn for the weekly earnings (in rupees) of workers in a factory. The class marks and their corresponding frequencies are: \(250\) → \(6\), \(350\) → \(14\), \(450\) → \(30\), \(550\) → \(22\), \(650\) → \(12\), \(750\) → \(5\). Write the class interval in which the frequency is maximum.

Solution: Step 1: Read all class marks with their frequencies. Class mark \(250\) has frequency \(6\), class mark \(350\) has frequency \(14\), class mark \(450\) has frequency \(30\), class mark \(550\) has frequency \(22\), class mark \(650\) has frequency \(12\), class mark \(750\) has frequency \(5\). Step 2: Find the maximum frequency. Comparing all frequencies: \(6, 14, 30, 22, 12, 5\), the maximum is \(30\), which belongs to class mark \(450\). Step 3: Determine the class interval. The class width is \(100\). So, Lower Limit \(= 450 - 50 = 400\), Upper Limit \(= 450 + 50 = 500\). The class interval corresponding to class mark \(450\) is \(400 - 500\).

Answer: The class with maximum frequency is \(400 - 500\).

🎯 Try a Similar Question

Try a Similar Question

Question: The following table shows the data represented in a frequency polygon drawn for the marks scored by students in a test. Identify the class interval in which the frequency is maximum. \nClass Interval (Marks): 10–20, 20–30, 30–40, 40–50, 50–60\nFrequency (No. of Students): 8, 15, 12, 25, 10

Solution

  1. Step 1: List all class intervals and their frequencies: From the frequency polygon data, we have:\nClass 10–20 has frequency 8,\nClass 20–30 has frequency 15,\nClass 30–40 has frequency 12,\nClass 40–50 has frequency 25,\nClass 50–60 has frequency 10.
  2. Step 2: Compare all frequencies: The frequencies are 8, 15, 12, 25, and 10. Comparing these values, the largest frequency is \(25\).
  3. Step 3: Identify the corresponding class interval: The frequency \(25\) corresponds to the class interval 40–50. Therefore, the class with maximum frequency is 40–50.

Answer: The class with maximum frequency is 40–50 (with frequency 25).

Everything you get with Solver7

More questions in Statistics

Chapter 6 Examples Q1 Practice Set 6.1 Q1 Practice Set 6.2 Q1 Practice Set 6.3 Q1 Practice Set 6.4 Q1 Practice Set 6.5 Q1 (i) Practice Set 6.6 Q1 Miscellaneous Problem Set 6 Q1 (i) 04/2019 2019 / Question 1 QA (i) 04/2019 2019 / Question 5 Q1 N362 2020 / Question 4 Q1 N384 2024 / Question 5 Q1 N384 2026 / Question 4 Q1 N619 2024 / Question 3 QA (i) N619 2024 / Question 5 Q1 (a) N919 2026 / Question 5 Q1 Chapter 6 Examples Q2 Practice Set 6.1 Q2 Practice Set 6.2 Q2 Practice Set 6.3 Q2 Practice Set 6.4 Q2 Practice Set 6.5 Q1 (ii) Practice Set 6.6 Q2 Miscellaneous Problem Set 6 Q1 (ii) 04/2019 2019 / Question 3 QA (ii) 04/2019 2019 / Question 6 Q2 (a) N384 2026 / Question 5 Q2 (a) N619 2024 / Question 4 Q2 N619 2024 / Question 5 Q1 (b) N819 2025 / Question 5 Q2 (a) N913 2023 / Question 4 Q2 N913 2023 / Question 5 Q2 Chapter 6 Examples Q3 Practice Set 6.1 Q3 Practice Set 6.2 Q3 Practice Set 6.3 Q3 Practice Set 6.4 Q3 Practice Set 6.5 Q1 (iii) Practice Set 6.6 Q3 Miscellaneous Problem Set 6 Q1 (iii) 04/2018 2018 / Question 5 Q3 04/2019 2019 / Question 6 Q2 (b) N384 2024 / Question 4 Q3 N384 2026 / Question 5 Q2 (b) N684 2025 / Question 2 QA (iii) N684 2025 / Question 3 QB (i) N684 2025 / Question 4 Q3 N819 2025 / Question 4 Q3 N819 2025 / Question 5 Q2 (b) Chapter 6 Examples Q4 Practice Set 6.1 Q4 Practice Set 6.2 Q4 Practice Set 6.3 Q4 Practice Set 6.4 Q4 Practice Set 6.5 Q1 (iv) Practice Set 6.6 Q4 Miscellaneous Problem Set 6 Q1 (iv) 04/2019 2019 / Question 6 Q2 (c) N384 2026 / Question 1 QA (iv) N384 2026 / Question 5 Q2 (c)