SOLVER7 Study. Nothing Else.
Chapter 6 Examples Q16 (ii)

Answer the following questions based on the frequency polygon given in the adjacent figure.
State the class whose frequency is \(14.\)

MAH STATE BOARD Mah SB Class 10 Maths · Statistics

Solution

👶 Simple Explanation

Simple Explanation

Imagine a dot-to-dot drawing where each dot sits at a special spot. The dot's height tells you how many students scored in that group. We look for the dot sitting at height 14. That dot sits above the number 25 on the bottom line. The number 25 is the middle of the group 20 to 30. So the group with 14 students is the 20 to 30 group. It is like finding which shelf a book sits on by looking at its label.

Answer: The class whose frequency is 14 is \( 20 - 30 \).

📖 Reading a Frequency Polygon

Detailed Explanation

A frequency polygon is a graph that shows the frequency distribution of grouped data. Each point on the polygon is plotted using the class mark (midpoint of a class interval) on the X-axis and the corresponding frequency on the Y-axis. To read information from a frequency polygon, we look at the coordinates of each plotted point. The X-coordinate tells us the class mark, and the Y-coordinate tells us the frequency of that class. Once we know the class mark, we can find the class interval by using the class width (here, 10) and going 5 units below and 5 units above the class mark.

Formula Used

If class mark is \( x \) and class width is \( h \), then class interval is \( \left(x - \dfrac{h}{2},\ x + \dfrac{h}{2}\right) \).

Solution

  1. Step 1: Locate frequency 14 on the graph: Look at the frequency polygon and search for the point whose Y-coordinate (frequency) is 14. From the figure, the point \( (25, 14) \) has frequency 14.
  2. Step 2: Identify the class mark: The X-coordinate of this point is 25. So, the class mark of the required class is 25.
  3. Step 3: Find the class interval: The class width \( h = 10 \) (as classes are 0-10, 10-20, 20-30, ...). Using the formula: \[ \text{Class} = \left(25 - \dfrac{10}{2},\ 25 + \dfrac{10}{2}\right) = (20,\ 30) \] So the class is 20 - 30.

Final Answer

The class whose frequency is 14 is \( 20 - 30 \).

Common Mistake

Students often write only the class mark (25) as the answer instead of the class interval. Remember, the class mark is the midpoint; the actual class is obtained by subtracting and adding half the class width.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Scan the frequency polygon for the point whose Y-coordinate equals 14. — Reason: In a frequency polygon the vertical axis represents frequency, so looking at height 14 on the Y-axis pinpoints the exact point we need.
  2. Step 2: From the graph, the point at height 14 is located at coordinates \( (25,\ 14) \). — Reason: Reading off both coordinates of the identified point gives us the class mark (X-value) and confirms the frequency (Y-value).
  3. Step 3: Note the class mark of the required class: \( x = 25 \). — Reason: The X-coordinate of any plotted point in a frequency polygon is always the midpoint (class mark) of the corresponding class interval.
  4. Step 4: Determine the class width. The given classes are 0–10, 10–20, 20–30, …, so \( h = 10 \). — Reason: Knowing the class width lets us spread equally on both sides of the class mark to recover the full interval.
  5. Step 5: Apply the formula to find the class interval. Lower boundary: \( 25 - \dfrac{10}{2} = 25 - 5 = 20 \). Upper boundary: \( 25 + \dfrac{10}{2} = 25 + 5 = 30 \). Therefore the class interval is \( (20,\ 30) \), i.e., 20 – 30. — Reason: Subtracting and adding half the class width from the class mark gives the exact lower and upper limits of the class.

Final Answer

The class whose frequency is 14 is \( 20 - 30 \).

Common Mistake

One common mistake: Students sometimes read the X-coordinate of the point (the class mark, 25) as the class interval itself and write the answer as '25', forgetting to use the class width to convert the class mark back into a class interval.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: From the frequency polygon, the point with Y-coordinate 14 is \( (25,\ 14) \), so the class mark is \( 25 \).
  2. Step 2: Class width \( h = 10 \). Applying the formula: \[ \left(25 - \dfrac{10}{2},\ 25 + \dfrac{10}{2}\right) = (20,\ 30) \]

Answer: The class whose frequency is 14 is \( 20 - 30 \).

➕ More Examples

More Examples

Example 1

Question: A frequency polygon is drawn for the marks obtained by students in a test. The class intervals are 0–10, 10–20, 20–30, 30–40, and 40–50. Their corresponding frequencies are 6, 18, 25, 18, and 8 respectively. (i) Which class has a frequency of 18? (ii) What is the highest frequency and which class does it belong to?

Solution: Step 1: List the class intervals with their frequencies.\nClass 0–10 has frequency 6.\nClass 10–20 has frequency 18.\nClass 20–30 has frequency 25.\nClass 30–40 has frequency 18.\nClass 40–50 has frequency 8. \nStep 2 (Part i): Identify the class(es) with frequency 18.\nLooking at the table, frequency \( 18 \) appears for both the class \( 10 \text{–} 20 \) and the class \( 30 \text{–} 40 \).\nSo the classes with frequency 18 are 10–20 and 30–40. \nStep 3 (Part ii): Find the highest frequency.\nComparing all frequencies: 6, 18, 25, 18, 8.\nThe highest frequency is \( 25 \), which belongs to the class \( 20 \text{–} 30 \).

Answer: (i) Classes 10–20 and 30–40 each have a frequency of 18. (ii) The highest frequency is 25, belonging to the class 20–30.

Example 2

Question: The frequency polygon for the daily wages (in rupees) of workers in a factory has the following data: class intervals 100–150, 150–200, 200–250, 250–300, 300–350 with frequencies 9, 16, 30, 16, and 5 respectively. (i) State the class whose frequency is 16. (ii) Which class has the lowest frequency, and what is that frequency?

Solution: Step 1: List the class intervals with their frequencies.\nClass 100–150 has frequency 9.\nClass 150–200 has frequency 16.\nClass 200–250 has frequency 30.\nClass 250–300 has frequency 16.\nClass 300–350 has frequency 5. \nStep 2 (Part i): Identify the class(es) with frequency 16.\nFrequency \( 16 \) corresponds to both the class \( 150 \text{–} 200 \) and the class \( 250 \text{–} 300 \). \nStep 3 (Part ii): Find the class with the lowest frequency.\nComparing all frequencies: 9, 16, 30, 16, 5.\nThe lowest frequency is \( 5 \), which belongs to the class \( 300 \text{–} 350 \).

Answer: (i) Classes 150–200 and 250–300 each have a frequency of 16. (ii) The class 300–350 has the lowest frequency of 5.

🎯 Try a Similar Question

Try a Similar Question

Question: A frequency polygon is drawn for a dataset with the following class intervals and their corresponding frequencies: \( 10 - 20 \) has frequency \( 8 \), \( 20 - 30 \) has frequency \( 12 \), \( 30 - 40 \) has frequency \( 18 \), \( 40 - 50 \) has frequency \( 10 \), and \( 50 - 60 \) has frequency \( 6 \). Based on this frequency polygon, identify the class interval whose frequency is \( 18 \). Also, state the midpoint of that class.

Solution

  1. Step 1: Understand the frequency polygon data: List all the class intervals with their frequencies: \( 10 - 20 \) → \( 8 \), \( 20 - 30 \) → \( 12 \), \( 30 - 40 \) → \( 18 \), \( 40 - 50 \) → \( 10 \), \( 50 - 60 \) → \( 6 \).
  2. Step 2: Identify the class with frequency 18: We look for the class interval whose frequency equals \( 18 \). From the table, the class interval \( 30 - 40 \) has a frequency of \( 18 \).
  3. Step 3: Find the midpoint of the identified class: The midpoint of a class interval is calculated as: \[ \text{Midpoint} = \frac{\text{Lower limit} + \text{Upper limit}}{2} \] For the class \( 30 - 40 \): \[ \text{Midpoint} = \frac{30 + 40}{2} = \frac{70}{2} = 35 \]
  4. Step 4: State the answer: The class whose frequency is \( 18 \) is \( 30 - 40 \), and its midpoint is \( 35 \).

Answer: The class whose frequency is \( 18 \) is \( 30 - 40 \), and the midpoint of this class is \( 35 \).

Everything you get with Solver7

More questions in Statistics

Chapter 6 Examples Q1 Practice Set 6.1 Q1 Practice Set 6.2 Q1 Practice Set 6.3 Q1 Practice Set 6.4 Q1 Practice Set 6.5 Q1 (i) Practice Set 6.6 Q1 Miscellaneous Problem Set 6 Q1 (i) 04/2019 2019 / Question 1 QA (i) 04/2019 2019 / Question 5 Q1 N362 2020 / Question 4 Q1 N384 2024 / Question 5 Q1 N384 2026 / Question 4 Q1 N619 2024 / Question 3 QA (i) N619 2024 / Question 5 Q1 (a) N919 2026 / Question 5 Q1 Chapter 6 Examples Q2 Practice Set 6.1 Q2 Practice Set 6.2 Q2 Practice Set 6.3 Q2 Practice Set 6.4 Q2 Practice Set 6.5 Q1 (ii) Practice Set 6.6 Q2 Miscellaneous Problem Set 6 Q1 (ii) 04/2019 2019 / Question 3 QA (ii) 04/2019 2019 / Question 6 Q2 (a) N384 2026 / Question 5 Q2 (a) N619 2024 / Question 4 Q2 N619 2024 / Question 5 Q1 (b) N819 2025 / Question 5 Q2 (a) N913 2023 / Question 4 Q2 N913 2023 / Question 5 Q2 Chapter 6 Examples Q3 Practice Set 6.1 Q3 Practice Set 6.2 Q3 Practice Set 6.3 Q3 Practice Set 6.4 Q3 Practice Set 6.5 Q1 (iii) Practice Set 6.6 Q3 Miscellaneous Problem Set 6 Q1 (iii) 04/2018 2018 / Question 5 Q3 04/2019 2019 / Question 6 Q2 (b) N384 2024 / Question 4 Q3 N384 2026 / Question 5 Q2 (b) N684 2025 / Question 2 QA (iii) N684 2025 / Question 3 QB (i) N684 2025 / Question 4 Q3 N819 2025 / Question 4 Q3 N819 2025 / Question 5 Q2 (b) Chapter 6 Examples Q4 Practice Set 6.1 Q4 Practice Set 6.2 Q4 Practice Set 6.3 Q4 Practice Set 6.4 Q4 Practice Set 6.5 Q1 (iv) Practice Set 6.6 Q4 Miscellaneous Problem Set 6 Q1 (iv) 04/2019 2019 / Question 6 Q2 (c) N384 2026 / Question 1 QA (iv) N384 2026 / Question 5 Q2 (c)