SOLVER7 Study. Nothing Else.
Chapter 6 Examples Q15

The table below shows the net asset value (NAV) per unit of mutual funds of some companies.
Draw a histogram representing the information.

MAH STATE BOARD Mah SB Class 10 Maths · Statistics

Solution

👶 Simple Explanation

Simple Explanation

Imagine lining up blocks side by side with no gaps between them. A histogram is like that — it is a picture made of touching bars. The data we have uses number ranges like 8-9 and 10-11, but there is a tiny gap between 9 and 10. We fix that gap by nudging each edge by half a unit. So 8-9 becomes 7.5-9.5, and so on. The height of each bar tells us how many mutual funds fall in that range. The tallest bar wins — that is the group with the most funds.

Answer: The histogram is drawn on continuous class intervals 7.5-9.5, 9.5-11.5, 11.5-13.5, 13.5-15.5, 15.5-17.5 with heights 20, 40, 30, 25, 15 respectively. The tallest bar corresponds to the class 9.5-11.5 (frequency 40), and the shortest bar corresponds to 15.5-17.5 (frequency 15).

📖 Histogram of NAV of Mutual Funds

Detailed Explanation

A histogram is a graphical representation of grouped frequency data using rectangles (bars) drawn on the class intervals as the base with heights proportional to the frequencies. For a histogram to be drawn correctly, the class intervals must be continuous (no gaps between them). Looking at the given data, the classes are 8-9, 10-11, 12-13, 14-15, 16-17. There are gaps between consecutive classes (for example, between 9 and 10). So these classes are in inclusive form and must be converted into exclusive (continuous) form before drawing the histogram. Once converted, we draw rectangles whose widths equal the class size and whose heights equal the frequency (number of mutual funds).

Formula Used

Adjustment factor \( = \dfrac{\text{lower limit of one class} - \text{upper limit of previous class}}{2} \). Subtract this from every lower limit and add it to every upper limit.

Solution

  1. Step 1: Identify the gap between classes: The given intervals are 8-9, 10-11, 12-13, 14-15, 16-17. The gap between the upper limit of one class (say 9) and the lower limit of the next class (10) is 1. So the adjustment factor is \( \dfrac{10 - 9}{2} = 0.5 \).
  2. Step 2: Convert to continuous (exclusive) classes: Subtract 0.5 from each lower limit and add 0.5 to each upper limit. The new class intervals become: 7.5-9.5, 9.5-11.5, 11.5-13.5, 13.5-15.5, 15.5-17.5. Each class now has width \( 2 \) and there are no gaps.
  3. Step 3: Prepare the adjusted frequency table: Class Interval — Frequency (No. of mutual funds): 7.5-9.5 \( \to 20 \); 9.5-11.5 \( \to 40 \); 11.5-13.5 \( \to 30 \); 13.5-15.5 \( \to 25 \); 15.5-17.5 \( \to 15 \).
  4. Step 4: Choose the axes and scale: On the x-axis, represent NAV (in Rs) using the adjusted class intervals. Since the values start from 7.5 (not from 0), we show a kink (zig-zag mark) on the x-axis near the origin to indicate the break. Use a scale like 1 cm = 2 units on the x-axis. On the y-axis, represent the number of mutual funds using a scale like 1 cm = 5 funds, going up to at least 40.
  5. Step 5: Draw the rectangles (bars): For each adjusted class interval, draw a rectangle whose base is the class interval on the x-axis and whose height corresponds to the frequency on the y-axis: Bar 1: base 7.5 to 9.5, height 20. Bar 2: base 9.5 to 11.5, height 40. Bar 3: base 11.5 to 13.5, height 30. Bar 4: base 13.5 to 15.5, height 25. Bar 5: base 15.5 to 17.5, height 15.
  6. Step 6: Label the histogram: Give the graph a title such as 'Histogram of NAV of Mutual Funds'. Label the x-axis as 'NAV (in Rs)' and the y-axis as 'Number of Mutual Funds'. Make sure adjacent bars share their sides (no gaps), which shows that the data is continuous.

Final Answer

The histogram is drawn on continuous class intervals 7.5-9.5, 9.5-11.5, 11.5-13.5, 13.5-15.5, 15.5-17.5 with heights 20, 40, 30, 25, 15 respectively. The tallest bar corresponds to the class 9.5-11.5 (frequency 40), and the shortest bar corresponds to 15.5-17.5 (frequency 15).

Common Mistake

A very common mistake is drawing the histogram directly using the given inclusive classes 8-9, 10-11, 12-13, etc. This leaves gaps between the bars, which is incorrect for a histogram. Students must first convert inclusive classes to exclusive (continuous) form using the adjustment factor of 0.5 before drawing.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: List the given class intervals and their frequencies: 8–9 (frequency 20), 10–11 (frequency 40), 12–13 (frequency 30), 14–15 (frequency 25), 16–17 (frequency 15). — Reason: Before drawing a histogram, we must first record the data clearly so we can check whether the classes are already continuous.
  2. Step 2: Check for gaps between consecutive classes. The upper limit of the first class is 9, and the lower limit of the next class is 10. The gap is \( 10 - 9 = 1 \). Since a gap exists, the classes are in inclusive (discontinuous) form and must be converted. — Reason: Histograms require touching bars with no spaces; gaps between class limits break this requirement.
  3. Step 3: Calculate the adjustment factor using the gap found above: \[ \text{Adjustment Factor} = \frac{10 - 9}{2} = \frac{1}{2} = 0.5 \] — Reason: Splitting the gap equally on both sides of each boundary ensures a seamless transition between classes without altering the class width meaningfully.
  4. Step 4: Apply the adjustment: subtract \( 0.5 \) from every lower limit and add \( 0.5 \) to every upper limit. The original class 8–9 becomes \( 8 - 0.5 = 7.5 \) to \( 9 + 0.5 = 9.5 \), giving 7.5–9.5. Similarly: 10–11 becomes 9.5–11.5, 12–13 becomes 11.5–13.5, 14–15 becomes 13.5–15.5, and 16–17 becomes 15.5–17.5. — Reason: This conversion removes all gaps and makes every pair of neighbouring classes share a common boundary, which is essential for a valid histogram.
  5. Step 5: Write the updated frequency table with continuous classes:\nClass 7.5–9.5, Frequency 20;\nClass 9.5–11.5, Frequency 40;\nClass 11.5–13.5, Frequency 30;\nClass 13.5–15.5, Frequency 25;\nClass 15.5–17.5, Frequency 15.\nNote that each class now has width \( 9.5 - 7.5 = 2 \). — Reason: Confirming equal class widths ensures that bar heights directly represent frequencies without needing any frequency-density adjustment.
  6. Step 6: Draw the histogram: mark the continuous class intervals on the horizontal axis and frequency values (0, 10, 20, 30, 40) on the vertical axis. Draw five adjacent rectangles with bases 7.5–9.5, 9.5–11.5, 11.5–13.5, 13.5–15.5, 15.5–17.5 and heights 20, 40, 30, 25, 15 respectively. The bars must touch each other with no gaps. — Reason: Adjacent bars with no gap visually confirm that the data is continuous, which is the defining feature that distinguishes a histogram from a bar chart.
  7. Step 7: Identify the tallest and shortest bars. The tallest bar has height 40 and sits over the class 9.5–11.5, meaning the highest number of mutual funds (40) fall in the return range 9.5–11.5. The shortest bar has height 15 and sits over the class 15.5–17.5. — Reason: Comparing bar heights gives a quick visual summary of which return range is most and least common among the mutual funds.

Final Answer

The histogram is drawn on continuous class intervals 7.5-9.5, 9.5-11.5, 11.5-13.5, 13.5-15.5, 15.5-17.5 with heights 20, 40, 30, 25, 15 respectively. The tallest bar corresponds to the class 9.5-11.5 (frequency 40), and the shortest bar corresponds to 15.5-17.5 (frequency 15).

Common Mistake

One common mistake: Students forget to apply the adjustment factor and directly draw the histogram on the original inclusive classes (8–9, 10–11, etc.), leaving visible gaps between bars — this produces a bar chart, not a histogram, and misrepresents the continuous nature of the data.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Find the adjustment factor: Gap between classes (e.g., 10 and 9): \[ \text{Adjustment factor} = \dfrac{10 - 9}{2} = 0.5 \]
  2. Step 2: Convert to continuous class intervals: Subtract 0.5 from each lower limit and add 0.5 to each upper limit: 8-9 \(\to\) 7.5-9.5, 10-11 \(\to\) 9.5-11.5, 12-13 \(\to\) 11.5-13.5, 14-15 \(\to\) 13.5-15.5, 16-17 \(\to\) 15.5-17.5.
  3. Step 3: Frequency table for histogram: Class intervals with corresponding frequencies: 7.5-9.5 \(\to\) 20, 9.5-11.5 \(\to\) 40, 11.5-13.5 \(\to\) 30, 13.5-15.5 \(\to\) 25, 15.5-17.5 \(\to\) 15. Draw bars of width 2 at these heights.

Answer: The histogram is drawn on continuous class intervals 7.5-9.5, 9.5-11.5, 11.5-13.5, 13.5-15.5, 15.5-17.5 with heights 20, 40, 30, 25, 15 respectively. The tallest bar corresponds to the class 9.5-11.5 (frequency 40), and the shortest bar corresponds to 15.5-17.5 (frequency 15).

➕ More Examples

More Examples

Example 1

Question: The table below shows the daily wages (in rupees) of workers in a factory. Draw a histogram representing this data. \nDaily Wages (in Rs): 200–250, 250–300, 300–350, 350–400, 400–450\nNumber of Workers: 12, 18, 30, 25, 15

Solution: All class intervals have equal width of 50, so the height of each bar equals the frequency directly. \nClass intervals and their frequencies: \nThe interval 200–250 has frequency 12, so bar height = 12.\nThe interval 250–300 has frequency 18, so bar height = 18.\nThe interval 300–350 has frequency 30, so bar height = 30.\nThe interval 350–400 has frequency 25, so bar height = 25.\nThe interval 400–450 has frequency 15, so bar height = 15. \nTo draw the histogram: 1. Draw the x-axis representing Daily Wages (in Rs) and the y-axis representing Number of Workers. 2. Mark the class intervals on the x-axis: 200, 250, 300, 350, 400, 450. 3. Draw adjacent bars (no gaps) above each class interval with heights equal to the respective frequencies: Bar over 200–250 has height 12. Bar over 250–300 has height 18. Bar over 300–350 has height 30 (tallest bar). Bar over 350–400 has height 25. Bar over 400–450 has height 15. 4. Label the axes and title the histogram "Daily Wages of Factory Workers". \nThe total number of workers is \[ 12 + 18 + 30 + 25 + 15 = 100. \]\nThe class with the highest frequency is 300–350 with 30 workers.

Answer: A histogram with 5 adjacent bars over the intervals 200–250, 250–300, 300–350, 350–400, 400–450 with heights 12, 18, 30, 25, and 15 respectively. The modal class is 300–350.

Example 2

Question: The following table shows the marks obtained by students in a Class 10 Mathematics test. Draw a histogram to represent this data. \nMarks Obtained: 0–10, 10–20, 20–40, 40–60, 60–70\nNumber of Students: 5, 8, 20, 16, 6

Solution: The class intervals have unequal widths, so we must use frequency density. \nThe formula for frequency density is: Frequency Density = Frequency divided by Class Width. \nFor the interval 0–10: class width = 10, frequency = 5, so \[ \text{Frequency Density} = \frac{5}{10} = 0.5 \] \nFor the interval 10–20: class width = 10, frequency = 8, so \[ \text{Frequency Density} = \frac{8}{10} = 0.8 \] \nFor the interval 20–40: class width = 20, frequency = 20, so \[ \text{Frequency Density} = \frac{20}{20} = 1.0 \] \nFor the interval 40–60: class width = 20, frequency = 16, so \[ \text{Frequency Density} = \frac{16}{20} = 0.8 \] \nFor the interval 60–70: class width = 10, frequency = 6, so \[ \text{Frequency Density} = \frac{6}{10} = 0.6 \] \nTo draw the histogram: 1. Draw the x-axis representing Marks and the y-axis representing Frequency Density. 2. Mark the class boundaries on the x-axis: 0, 10, 20, 40, 60, 70. 3. Draw adjacent bars above each class interval with heights equal to the frequency densities: Bar over 0–10: height = 0.5 Bar over 10–20: height = 0.8 Bar over 20–40: height = 1.0 (tallest bar) Bar over 40–60: height = 0.8 Bar over 60–70: height = 0.6 4. Note that the bars over 20–40 and 40–60 are wider than the others. 5. Label axes and title the histogram "Marks Obtained in Mathematics Test". \nThe total number of students is \[ 5 + 8 + 20 + 16 + 6 = 55. \]

Answer: A histogram with 5 adjacent bars over 0–10, 10–20, 20–40, 40–60, and 60–70 with frequency densities 0.5, 0.8, 1.0, 0.8, and 0.6 respectively. Since class widths are unequal, frequency density (not frequency) is plotted on the y-axis.

🎯 Try a Similar Question

Try a Similar Question

Question: The table below shows the monthly electricity consumption (in units) of households in a locality. \nMonthly Consumption (units) | Number of Households 60 – 62 | 10 63 – 65 | 35 66 – 68 | 50 69 – 71 | 28 72 – 74 | 12 \nDraw a histogram to represent the above data.

Solution

  1. Step 1: Check whether class intervals are continuous: The given class intervals 60–62, 63–65, 66–68, 69–71, 72–74 are not continuous because there are gaps of 1 unit between successive classes (e.g., 62 to 63). We need to convert them into continuous class intervals by adjusting boundaries.
  2. Step 2: Find the adjustment factor: Gap between successive classes = \(63 - 62 = 1\). Adjustment = \(\frac{1}{2} = 0.5\). Subtract 0.5 from each lower limit and add 0.5 to each upper limit.
  3. Step 3: Form continuous class intervals: 60 – 62 becomes \(59.5 - 62.5\), frequency = 10. 63 – 65 becomes \(62.5 - 65.5\), frequency = 35. 66 – 68 becomes \(65.5 - 68.5\), frequency = 50. 69 – 71 becomes \(68.5 - 71.5\), frequency = 28. 72 – 74 becomes \(71.5 - 74.5\), frequency = 12.
  4. Step 4: Verify class width: Each continuous class has width = \(62.5 - 59.5 = 3\). Since all class widths are equal, the height of each bar in the histogram equals the frequency directly (no adjustment for frequency density is needed).
  5. Step 5: List bar heights for the histogram: Class 59.5–62.5: height = 10. Class 62.5–65.5: height = 35. Class 65.5–68.5: height = 50. Class 68.5–71.5: height = 28. Class 71.5–74.5: height = 12.
  6. Step 6: Draw the histogram: On graph paper, mark the x-axis with the continuous class boundaries (59.5, 62.5, 65.5, 68.5, 71.5, 74.5) and the y-axis with frequency values (0, 10, 20, 30, 40, 50). Draw five adjacent bars with no gaps between them. The bar heights are 10, 35, 50, 28, and 12 respectively. The tallest bar corresponds to the class 65.5–68.5 with frequency 50, and the shortest bar corresponds to the class 59.5–62.5 with frequency 10.

Answer: The histogram is drawn on continuous class intervals 59.5–62.5, 62.5–65.5, 65.5–68.5, 68.5–71.5, 71.5–74.5 with bar heights (frequencies) 10, 35, 50, 28, and 12 respectively. The tallest bar corresponds to the class 65.5–68.5 (frequency 50), and the shortest bar corresponds to the class 59.5–62.5 (frequency 10).

Everything you get with Solver7

More questions in Statistics

Chapter 6 Examples Q1 Practice Set 6.1 Q1 Practice Set 6.2 Q1 Practice Set 6.3 Q1 Practice Set 6.4 Q1 Practice Set 6.5 Q1 (i) Practice Set 6.6 Q1 Miscellaneous Problem Set 6 Q1 (i) 04/2019 2019 / Question 1 QA (i) 04/2019 2019 / Question 5 Q1 N362 2020 / Question 4 Q1 N384 2024 / Question 5 Q1 N384 2026 / Question 4 Q1 N619 2024 / Question 3 QA (i) N619 2024 / Question 5 Q1 (a) N919 2026 / Question 5 Q1 Chapter 6 Examples Q2 Practice Set 6.1 Q2 Practice Set 6.2 Q2 Practice Set 6.3 Q2 Practice Set 6.4 Q2 Practice Set 6.5 Q1 (ii) Practice Set 6.6 Q2 Miscellaneous Problem Set 6 Q1 (ii) 04/2019 2019 / Question 3 QA (ii) 04/2019 2019 / Question 6 Q2 (a) N384 2026 / Question 5 Q2 (a) N619 2024 / Question 4 Q2 N619 2024 / Question 5 Q1 (b) N819 2025 / Question 5 Q2 (a) N913 2023 / Question 4 Q2 N913 2023 / Question 5 Q2 Chapter 6 Examples Q3 Practice Set 6.1 Q3 Practice Set 6.2 Q3 Practice Set 6.3 Q3 Practice Set 6.4 Q3 Practice Set 6.5 Q1 (iii) Practice Set 6.6 Q3 Miscellaneous Problem Set 6 Q1 (iii) 04/2018 2018 / Question 5 Q3 04/2019 2019 / Question 6 Q2 (b) N384 2024 / Question 4 Q3 N384 2026 / Question 5 Q2 (b) N684 2025 / Question 2 QA (iii) N684 2025 / Question 3 QB (i) N684 2025 / Question 4 Q3 N819 2025 / Question 4 Q3 N819 2025 / Question 5 Q2 (b) Chapter 6 Examples Q4 Practice Set 6.1 Q4 Practice Set 6.2 Q4 Practice Set 6.3 Q4 Practice Set 6.4 Q4 Practice Set 6.5 Q1 (iv) Practice Set 6.6 Q4 Miscellaneous Problem Set 6 Q1 (iv) 04/2019 2019 / Question 6 Q2 (c) N384 2026 / Question 1 QA (iv) N384 2026 / Question 5 Q2 (c)