SOLVER7 Study. Nothing Else.
Exercise 11.3 Q5

A conical pit of top diameter \(3.5\ m\) is \(12\ m\) deep. What is its capacity in kilolitres\(?\)
\([Hint:\) Assume \(\pi=\dfrac{22}{7}].\)

CBSE Class 9 Maths · Surface Areas And Volumes

Solution

👶 Simple Explanation

Simple Explanation

Imagine digging a big ice cream cone shape into the ground. That hole is the conical pit! Now, how much water can it hold? We measure that using the size of the opening at the top and how deep it goes. The opening has a width of 3.5 metres and the pit is 12 metres deep. Using a special maths rule for cone shapes, we find the pit holds 38.5 kilolitres of water. One kilolitre is the same as one cubic metre of water!

Answer: The capacity of the conical pit is \( 38.5\ \text{kilolitres} \).

📖 Capacity of a Conical Pit

Detailed Explanation

A conical pit is shaped like a cone. Its capacity means how much liquid it can hold, which is the same as its volume. For a cone we use the volume formula, where \( r \) is the base radius, \( h \) is the height (here the depth), and \( \pi \) is taken as \( \frac{22}{7} \). The top diameter is given, so we must first halve it to get the radius. Finally, we convert the volume into kilolitres using the fact that \( 1\ \text{m}^3 = 1\ \text{kilolitre} \).

Formula Used

\[ V = \frac{1}{3}\pi r^2 h \]

Solution

  1. Step 1: Find the radius from the given top diameter. Since diameter is \( 3.5\ \text{m} \), the radius is \[ r = \frac{3.5}{2} = 1.75\ \text{m} = \frac{7}{4}\ \text{m}. \] We do this because the volume formula needs the radius, not the diameter.
  2. Step 2: Note the height (depth) of the pit: \[ h = 12\ \text{m}. \] The depth of a conical pit acts as the height of the cone.
  3. Step 3: Substitute the values into the cone volume formula: \[ V = \frac{1}{3}\pi r^2 h. \] So \[ V = \frac{1}{3} \times \frac{22}{7} \times \left(\frac{7}{4}\right)^2 \times 12. \]
  4. Step 4: Simplify step by step. First \[ \left(\frac{7}{4}\right)^2 = \frac{49}{16}. \] Then \[ V = \frac{1}{3} \times \frac{22}{7} \times \frac{49}{16} \times 12. \] Cancel common factors: \( \frac{49}{7} = 7 \), so \[ V = \frac{1}{3} \times 22 \times \frac{7}{16} \times 12. \]
  5. Step 5: Continue simplifying. Since \( \frac{12}{3} = 4 \), \[ V = 22 \times \frac{7}{16} \times 4 = \frac{22 \times 7 \times 4}{16} = \frac{616}{16} = 38.5. \] So the volume is \( 38.5\ \text{m}^3 \).
  6. Step 6: Convert to kilolitres. Since \( 1\ \text{m}^3 = 1\ \text{kilolitre} \), the capacity is \[ 38.5\ \text{kilolitres}. \]

Final Answer

The capacity of the conical pit is \( 38.5\ \text{kilolitres} \).

Common Mistake

A common mistake is using the diameter \( 3.5\ \text{m} \) directly as the radius, or forgetting the factor \( \frac{1}{3} \) in the cone volume formula (using \( \pi r^2 h \) like a cylinder instead).

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Identify the given information: the top diameter of the pit is \( 3.5\ \text{m} \) and the depth is \( 12\ \text{m} \). — Reason: Listing known values before substituting prevents errors and keeps the working organised.
  2. Step 2: Convert the diameter to radius: \[ r = \frac{3.5}{2} = 1.75\ \text{m} = \frac{7}{4}\ \text{m} \] — Reason: The cone volume formula requires the radius, not the diameter, so we must halve the diameter first.
  3. Step 3: Note the depth as the cone's height: \( h = 12\ \text{m} \). — Reason: For a pit, the depth plays the role of the cone's height in the volume formula.
  4. Step 4: Substitute all values into the volume formula: \[ V = \frac{1}{3} \times \frac{22}{7} \times \left(\frac{7}{4}\right)^2 \times 12 \] — Reason: Plugging in \( \pi = \frac{22}{7} \), \( r = \frac{7}{4} \), and \( h = 12 \) sets up the arithmetic for simplification.
  5. Step 5: Square the radius: \[ \left(\frac{7}{4}\right)^2 = \frac{49}{16} \] So the expression becomes: \[ V = \frac{1}{3} \times \frac{22}{7} \times \frac{49}{16} \times 12 \] — Reason: Squaring \( r \) first isolates the simplest fraction to work with next.
  6. Step 6: Cancel common factors across numerators and denominators. Since \( \frac{49}{7} = 7 \) and \( \frac{12}{3} = 4 \): \[ V = 22 \times \frac{7}{16} \times 4 \] Simplifying \( \frac{4}{16} = \frac{1}{4} \): \[ V = 22 \times \frac{7}{4} \] — Reason: Cancelling before multiplying keeps the numbers small and reduces the chance of arithmetic mistakes.
  7. Step 7: Compute the final product: \[ V = \frac{22 \times 7}{4} = \frac{154}{4} = 38.5\ \text{m}^3 \] Then convert to kilolitres using \( 1\ \text{m}^3 = 1\ \text{kilolitre} \): the capacity is \( 38.5\ \text{kilolitres} \). — Reason: The unit conversion is direct since 1 cubic metre of liquid equals exactly 1 kilolitre.

Final Answer

The capacity of the conical pit is \( 38.5\ \text{kilolitres} \).

Common Mistake

One common mistake: using the full diameter \( 3.5\ \text{m} \) in place of the radius in the formula, which gives a volume four times too large.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given: diameter \( = 3.5\ \text{m} \), so \( r = \frac{3.5}{2} = \frac{7}{4}\ \text{m} \); depth \( h = 12\ \text{m} \).
  2. Step 2: \[ V = \frac{1}{3} \times \frac{22}{7} \times \left(\frac{7}{4}\right)^2 \times 12 = \frac{1}{3} \times \frac{22}{7} \times \frac{49}{16} \times 12 \]
  3. Step 3: \[ V = \frac{22 \times 7 \times 4}{16} = \frac{616}{16} = 38.5\ \text{m}^3 = 38.5\ \text{kilolitres} \]

Answer: The capacity of the conical pit is \( 38.5\ \text{kilolitres} \).

➕ More Examples

More Examples

Example 1

Question: A conical water tank has a top diameter of 4.2 m and a depth of 10 m. Find its capacity in kilolitres. (Use \( \pi = \frac{22}{7} \))

Solution: Step 1: Find the radius. The diameter is 4.2 m, so the radius is \( r = \frac{4.2}{2} = 2.1 \text{ m} \). Step 2: Note the depth (height). The depth is \( h = 10 \text{ m} \). Step 3: Apply the volume formula. \[ V = \frac{1}{3} \pi r^2 h \] Substituting the values: \[ V = \frac{1}{3} \times \frac{22}{7} \times (2.1)^2 \times 10 \] Calculating \( (2.1)^2 \): \[ (2.1)^2 = 4.41 \] So: \[ V = \frac{1}{3} \times \frac{22}{7} \times 4.41 \times 10 \] Note that \( \frac{4.41}{7} = 0.63 \), so: \[ V = \frac{1}{3} \times 22 \times 0.63 \times 10 \] \[ V = \frac{1}{3} \times 138.6 \] \[ V = 46.2 \text{ m}^3 \] Step 4: Convert to kilolitres. Since \( 1 \text{ m}^3 = 1 \text{ kilolitre} \), the capacity is 46.2 kilolitres.

Answer: 46.2 kilolitres

Example 2

Question: Workers dug a conical pit at a construction site. The pit has a top diameter of 7 m and a depth of 15 m. Find the volume of earth removed in cubic metres and also state the capacity of the pit in kilolitres. (Use \( \pi = \frac{22}{7} \))

Solution: Step 1: Find the radius. The diameter is 7 m, so the radius is \( r = \frac{7}{2} = 3.5 \text{ m} \). Step 2: Note the depth (height). The depth is \( h = 15 \text{ m} \). Step 3: Apply the volume formula. \[ V = \frac{1}{3} \pi r^2 h \] Substituting the values: \[ V = \frac{1}{3} \times \frac{22}{7} \times (3.5)^2 \times 15 \] Calculating \( (3.5)^2 \): \[ (3.5)^2 = 12.25 \] Note that \( \frac{12.25}{7} = 1.75 \), so: \[ V = \frac{1}{3} \times 22 \times 1.75 \times 15 \] \[ V = \frac{1}{3} \times 577.5 \] \[ V = 192.5 \text{ m}^3 \] Step 4: State the capacity. Since \( 1 \text{ m}^3 = 1 \text{ kilolitre} \), the capacity of the pit is 192.5 kilolitres.

Answer: Volume of earth removed = \( 192.5 \text{ m}^3 \); Capacity = 192.5 kilolitres

🎯 Try a Similar Question

Try a Similar Question

Question: A conical pit has a top diameter of \( 4.2 \text{ m} \) and is \( 10 \text{ m} \) deep. Find the capacity of the pit in kilolitres. (Use \( \pi = \dfrac{22}{7} \).)

Solution

  1. Step 1: Find the radius of the conical pit: The diameter of the top of the conical pit is \( 4.2 \text{ m} \). Therefore, the radius is: \[ r = \frac{4.2}{2} = 2.1 \text{ m} \]
  2. Step 2: Note the depth (height) of the pit: The depth of the pit gives the height of the cone: \[ h = 10 \text{ m} \]
  3. Step 3: Apply the formula for the volume of a cone: The volume of a cone is given by \( V = \frac{1}{3}\pi r^2 h \). Substituting \( r = 2.1 \text{ m} \), \( h = 10 \text{ m} \), and \( \pi = \frac{22}{7} \): \[ V = \frac{1}{3} \times \frac{22}{7} \times (2.1)^2 \times 10 \]
  4. Step 4: Calculate (2.1)²: \[ (2.1)^2 = 4.41 \]
  5. Step 5: Substitute and simplify: \[ V = \frac{1}{3} \times \frac{22}{7} \times 4.41 \times 10 \] Note that \( 4.41 = \frac{441}{100} \) and \( \frac{441}{7} = 63 \), so: \[ V = \frac{1}{3} \times \frac{22 \times 63}{100} \times 10 \] \[ V = \frac{1}{3} \times \frac{1386}{100} \times 10 \] \[ V = \frac{1}{3} \times \frac{13860}{100} \] \[ V = \frac{1}{3} \times 138.6 \] \[ V = 46.2 \text{ m}^3 \]
  6. Step 6: Convert to kilolitres: Since \( 1 \text{ m}^3 = 1 \text{ kilolitre} \), the capacity of the conical pit is \[ V = 46.2 \text{ kilolitres} \]

Answer: The capacity of the conical pit is \( 46.2 \text{ kilolitres} \).

Everything you get with Solver7

More questions in Surface Areas And Volumes