SOLVER7 Study. Nothing Else.
Exercise 11.2 Q9(iii)

A right circular cylinder just encloses a sphere of radius \(r\) (see Fig. 11.10). Find ratio of the areas obtained in \((i)\) and \((ii).\)
\([Hint:\) Assume \(\pi=\dfrac{22}{7}].\)

CBSE Class 9 Maths · Surface Areas And Volumes

Solution

👶 Simple Explanation

Simple Explanation

Imagine a ball sitting perfectly inside a tin can, touching the top, bottom, and sides. The ball and the can are so well matched that the ball's width equals the can's width. The outer wrapping of the can (curved part only) turns out to cover exactly the same area as the entire surface of the ball. So when we compare them, they are perfectly equal. Neither one is bigger or smaller than the other.

Answer: The surface area of the sphere and the curved surface area of the cylinder are equal, so the ratio is \( 1 : 1 \).

📖 Ratio of Surface Areas: Sphere and Enclosing Cylinder

Detailed Explanation

In the figure, a sphere is placed exactly inside a right circular cylinder so that it touches the top, bottom, and curved side of the cylinder. Because the sphere just fits inside, its size decides the size of the cylinder. The sphere touches the curved wall all around, so the radius of the cylinder must equal the radius of the sphere, that is \( r \). The sphere also touches the flat top and bottom, so the height of the cylinder must equal the diameter of the sphere, that is \( 2r \). Once we know these dimensions, we simply use the formulas for surface area of a sphere and curved surface area of a cylinder, and then compare them as a ratio.

Formula Used

Surface area of sphere \[ = 4\pi r^2 \] Curved surface area of cylinder \[ = 2\pi r h \]

Solution

  1. Step 1: Match the dimensions of the cylinder to the sphere: Since the sphere just fits inside the cylinder, the sphere touches the curved surface all around. So the radius of the cylinder equals the radius of the sphere. Radius of cylinder \( = r \). The sphere also touches the top and bottom faces, so the height of the cylinder equals the diameter of the sphere. Height of cylinder \( = 2r \).
  2. Step 2: Find the surface area of the sphere (part i): Using the formula for the surface area of a sphere: \[ \text{Surface area of sphere} = 4\pi r^2 \]
  3. Step 3: Find the curved surface area of the cylinder (part ii): Using the curved surface area formula for a cylinder with radius \( r \) and height \( h = 2r \): \[ \text{CSA of cylinder} = 2\pi r h \] Substituting \( h = 2r \): \[ \text{CSA of cylinder} = 2\pi r \times 2r = 4\pi r^2 \]
  4. Step 4: Write the ratio of the two areas: Now we compare the surface area of the sphere to the curved surface area of the cylinder. \[ \text{Ratio} = \frac{4\pi r^2}{4\pi r^2} \]
  5. Step 5: Simplify the ratio: The common factor \( 4\pi r^2 \) cancels from top and bottom. \[ \text{Ratio} = \frac{1}{1} \] So the ratio is \( 1 : 1 \). Notice that \( \pi \) cancels, so we did not even need the value \( \pi = \frac{22}{7} \) here.

Final Answer

The surface area of the sphere and the curved surface area of the cylinder are equal, so the ratio is \( 1 : 1 \).

Common Mistake

A common mistake is to take the height of the cylinder as \( r \) instead of \( 2r \). Since the sphere touches both the top and bottom, the height must equal the full diameter \( 2r \), not the radius.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Identify the relationship between the sphere and the cylinder. Because the sphere just fits inside the cylinder and touches the curved wall all around, the radius of the cylinder must equal the radius of the sphere, which we call \( r \). — Reason: The sphere touching the curved surface means no gap exists between them, so both share the same radius.
  2. Step 2: Determine the height of the cylinder. Since the sphere also touches the flat top and bottom of the cylinder, the height of the cylinder equals the full diameter of the sphere. Height of cylinder \( h = 2r \). — Reason: The distance from the bottom face to the top face of a just-fitting sphere is exactly one diameter, not one radius.
  3. Step 3: Calculate the surface area of the sphere using its radius \( r \): \[S_{\text{sphere}} = 4\pi r^2\] — Reason: This is the standard formula for the total surface area of a sphere of radius \( r \).
  4. Step 4: Calculate the curved surface area of the cylinder by substituting \( h = 2r \) into the formula: \[S_{\text{cylinder}} = 2\pi r h = 2\pi r \times 2r = 4\pi r^2\] — Reason: We use only the curved (lateral) surface area of the cylinder, not its total surface area, as the problem asks for the curved part only.
  5. Step 5: Form the ratio of the surface area of the sphere to the curved surface area of the cylinder: \[\frac{S_{\text{sphere}}}{S_{\text{cylinder}}} = \frac{4\pi r^2}{4\pi r^2} = 1\] So the ratio is \( 1 : 1 \). — Reason: Both expressions simplify to the same value \( 4\pi r^2 \), confirming they are equal.

Final Answer

The surface area of the sphere and the curved surface area of the cylinder are equal, so the ratio is \( 1 : 1 \).

Common Mistake

One common mistake: Students often use the total surface area of the cylinder (which includes the two circular ends) instead of only the curved surface area, giving an incorrect ratio of \( 2 : 3 \) instead of \( 1 : 1 \).

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Sphere fits exactly inside cylinder, so radius of cylinder \( = r \) and height of cylinder \( = 2r \).
  2. Step 2: Surface area of sphere \( = 4\pi r^2 \); CSA of cylinder \( = 2\pi r \times 2r = 4\pi r^2 \).
  3. Step 3: Ratio \( = \frac{4\pi r^2}{4\pi r^2} = 1 : 1 \).

Answer: The surface area of the sphere and the curved surface area of the cylinder are equal, so the ratio is \( 1 : 1 \).

➕ More Examples

More Examples

Example 1

Question: A right circular cylinder just encloses a sphere of radius 7 cm. Find: (i) the curved surface area of the cylinder, (ii) the surface area of the sphere, and (iii) the ratio of the curved surface area of the cylinder to the surface area of the sphere. (Use \( \pi = \dfrac{22}{7} \).)

Solution: Since the cylinder just encloses the sphere of radius \( r = 7 \) cm, the radius of the cylinder equals the radius of the sphere, so \( r = 7 \) cm, and the height of the cylinder equals the diameter of the sphere, so \( h = 2r = 14 \) cm. Step 1: Curved Surface Area (CSA) of the cylinder. \[ \text{CSA of cylinder} = 2\pi r h \] Substituting \( r = 7 \) cm and \( h = 14 \) cm: \[ \text{CSA of cylinder} = 2 \times \frac{22}{7} \times 7 \times 14 \] \[ = 2 \times 22 \times 14 \] \[ = 616 \text{ cm}^2 \] Step 2: Surface Area (SA) of the sphere. \[ \text{SA of sphere} = 4\pi r^2 \] Substituting \( r = 7 \) cm: \[ \text{SA of sphere} = 4 \times \frac{22}{7} \times 7^2 \] \[ = 4 \times \frac{22}{7} \times 49 \] \[ = 4 \times 22 \times 7 \] \[ = 616 \text{ cm}^2 \] Step 3: Ratio of CSA of cylinder to SA of sphere. \[ \text{Ratio} = \frac{\text{CSA of cylinder}}{\text{SA of sphere}} = \frac{616}{616} = 1 \] So the ratio is \( 1 : 1 \).

Answer: CSA of cylinder = 616 cm², SA of sphere = 616 cm², Ratio = \( 1 : 1 \)

Example 2

Question: A sphere of radius 3.5 cm is exactly enclosed by a right circular cylinder (the cylinder just encloses the sphere). Find: (i) the curved surface area of the cylinder, (ii) the total surface area of the sphere, and (iii) the ratio of the area found in (i) to the area found in (ii). (Use \( \pi = \dfrac{22}{7} \).)

Solution: Since the cylinder just encloses the sphere of radius \( r = 3.5 \) cm, the radius of the cylinder is \( r = 3.5 \) cm and its height is \( h = 2r = 7 \) cm. Step 1: Curved Surface Area (CSA) of the cylinder. \[ \text{CSA of cylinder} = 2\pi r h \] Substituting \( r = 3.5 \) cm and \( h = 7 \) cm: \[ \text{CSA of cylinder} = 2 \times \frac{22}{7} \times 3.5 \times 7 \] Note that \( 3.5 = \frac{7}{2} \), so: \[ = 2 \times \frac{22}{7} \times \frac{7}{2} \times 7 \] \[ = 2 \times 22 \times \frac{7}{2} \] \[ = 22 \times 7 \] \[ = 154 \text{ cm}^2 \] Step 2: Total Surface Area (TSA) of the sphere. \[ \text{TSA of sphere} = 4\pi r^2 \] Substituting \( r = 3.5 = \frac{7}{2} \) cm: \[ \text{TSA of sphere} = 4 \times \frac{22}{7} \times \left(\frac{7}{2}\right)^2 \] \[ = 4 \times \frac{22}{7} \times \frac{49}{4} \] \[ = \frac{22}{7} \times 49 \] \[ = 22 \times 7 \] \[ = 154 \text{ cm}^2 \] Step 3: Ratio of CSA of cylinder to TSA of sphere. \[ \text{Ratio} = \frac{154}{154} = 1 \] So the required ratio is \( 1 : 1 \).

Answer: CSA of cylinder = 154 cm², TSA of sphere = 154 cm², Ratio = \( 1 : 1 \)

🎯 Try a Similar Question

Try a Similar Question

Question: A right circular cylinder just encloses a sphere of radius \( r \). Find the ratio of the total surface area of the sphere to the total surface area of the cylinder (including both circular ends).

Solution

  1. Step 1: Identify dimensions of the cylinder: Since the cylinder just encloses the sphere of radius \( r \), the radius of the cylinder equals \( r \) and its height equals the diameter of the sphere, i.e., \( h = 2r \).
  2. Step 2: Find the total surface area of the sphere: Total surface area of the sphere is \[ S_{\text{sphere}} = 4\pi r^2 \]
  3. Step 3: Find the total surface area of the cylinder: Total surface area of the cylinder (curved surface + two circular ends) is \[ S_{\text{cylinder}} = 2\pi r h + 2\pi r^2 \] Substituting \( h = 2r \): \[ S_{\text{cylinder}} = 2\pi r (2r) + 2\pi r^2 = 4\pi r^2 + 2\pi r^2 = 6\pi r^2 \]
  4. Step 4: Find the required ratio: The ratio of the total surface area of the sphere to the total surface area of the cylinder is \[ \frac{S_{\text{sphere}}}{S_{\text{cylinder}}} = \frac{4\pi r^2}{6\pi r^2} = \frac{4}{6} = \frac{2}{3} \] So the ratio is \( 2 : 3 \).

Answer: The ratio of the total surface area of the sphere to the total surface area of the cylinder is \( 2 : 3 \).

Everything you get with Solver7

More questions in Surface Areas And Volumes