SOLVER7 Study. Nothing Else.
Chapter 11 Examples Q1

Find the curved surface area of a right circular cone whose slant height is \(10\ cm\) and base radius is \(7\ cm.\)

CBSE Class 9 Maths · Surface Areas And Volumes

Solution

👶 Simple Explanation

Simple Explanation

Imagine wrapping a party hat with paper, covering only the sloping side. The amount of paper needed is called the curved surface area. A cone is just like that party hat — it has a pointy top and a round base. We only measure the slanting outer cover, not the flat bottom circle. Here, with a base radius of 7 cm and a slant height of 10 cm, the outer surface comes out to exactly 220 square centimetres.

Answer: The curved surface area of the cone is \( 220\ \text{cm}^2 \).

📖 Curved Surface Area of a Cone

Detailed Explanation

A right circular cone has a circular base and a pointed top called the apex. The slant height \( l \) is the distance from the apex to any point on the edge of the circular base, measured along the slanted surface. The curved surface area (CSA) is the area of the outer sloping surface of the cone, not including the flat circular base. For a cone, this curved surface area depends on the base radius \( r \) and the slant height \( l \). Here we are directly given the slant height, so we do not need to calculate it from the height.

Formula Used

Curved Surface Area of a cone \( = \pi r l \), where \( r \) is the base radius and \( l \) is the slant height.

Solution

  1. Step 1: Write down the given values. The base radius is \( r = 7 \) cm and the slant height is \( l = 10 \) cm.
  2. Step 2: Recall the formula for the curved surface area of a right circular cone: \[ \text{CSA} = \pi r l \] We use this because we need only the slant surface, not the base.
  3. Step 3: Substitute the values. We take \( \pi = \frac{22}{7} \) since the radius is 7, which cancels nicely. \[ \text{CSA} = \frac{22}{7} \times 7 \times 10 \]
  4. Step 4: Simplify. The \( 7 \) in the denominator cancels with the radius \( 7 \): \[ \text{CSA} = 22 \times 10 = 220 \] So the curved surface area is \( 220 \) square centimetres.

Final Answer

The curved surface area of the cone is \( 220\ \text{cm}^2 \).

Common Mistake

A common mistake is confusing the slant height \( l \) with the vertical height \( h \), or using the total surface area formula \( \pi r l + \pi r^2 \) when only the curved surface area \( \pi r l \) is asked.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: List the known values from the problem. Base radius: \( r = 7 \) cm, Slant height: \( l = 10 \) cm. — Reason: Identifying given information first ensures you apply the formula correctly without confusion.
  2. Step 2: Check whether slant height needs to be computed. The problem directly provides \( l = 10 \) cm, so no extra calculation is needed. — Reason: Sometimes only the vertical height is given and you would need \( l = \sqrt{r^2 + h^2} \); here that step is skipped because \( l \) is already known.
  3. Step 3: Write the formula for curved surface area: \[ \text{CSA} = \pi r l \] — Reason: This formula gives the area of only the sloping surface of the cone, which is exactly what the question asks for.
  4. Step 4: Choose the value of \( \pi \). Since the radius is \( 7 \) cm, use \( \pi = \frac{22}{7} \) so that the 7 cancels cleanly. — Reason: Picking \( \frac{22}{7} \) as the approximation for \( \pi \) makes arithmetic simpler when the radius is a multiple of 7.
  5. Step 5: Substitute all values into the formula: \[ \text{CSA} = \frac{22}{7} \times 7 \times 10 \] — Reason: Replacing each variable with its numerical value sets up the arithmetic for the final calculation.
  6. Step 6: Simplify by cancelling the 7 in the denominator with the factor of 7 in the radius: \[ \text{CSA} = 22 \times 10 = 220 \] — Reason: Cancellation reduces the multiplication to a simple one-step calculation, giving the result in square centimetres.

Final Answer

The curved surface area of the cone is \( 220\ \text{cm}^2 \).

Common Mistake

One common mistake: Students sometimes use the vertical height \( h \) instead of the slant height \( l \) directly in the formula \( \pi r l \). Always check whether the problem gives slant height or vertical height — only slant height goes into the CSA formula.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given: \( r = 7 \) cm, \( l = 10 \) cm
  2. Step 2: \[\text{CSA} = \frac{22}{7} \times 7 \times 10\]
  3. Step 3: \[\text{CSA} = 22 \times 10 = 220 \text{ cm}^2\]

Answer: The curved surface area of the cone is \( 220\ \text{cm}^2 \).

➕ More Examples

More Examples

Example 1

Question: A right circular cone has a slant height of 15 cm and a base radius of 6 cm. Find its curved surface area. (Use \( \pi = \frac{22}{7} \))

Solution: We are given: base radius \( r = 6 \) cm and slant height \( l = 15 \) cm. The formula for the curved surface area (CSA) of a cone is: \[ \text{CSA} = \pi r l \] Substituting the values: \[ \text{CSA} = \frac{22}{7} \times 6 \times 15 \] First, multiply the numbers: \[ 6 \times 15 = 90 \] So: \[ \text{CSA} = \frac{22}{7} \times 90 \] \[ \text{CSA} = \frac{22 \times 90}{7} = \frac{1980}{7} \] \[ \text{CSA} = 282.857... \approx 282.86 \text{ cm}^2 \]

Answer: Curved Surface Area \( = \frac{1980}{7} \approx 282.86 \) cm\(^2\)

Example 2

Question: A conical tent has a base diameter of 28 m and a slant height of 20 m. Find the curved surface area of the tent. (Use \( \pi = \frac{22}{7} \))

Solution: We are given: base diameter \( = 28 \) m, so base radius \( r = \frac{28}{2} = 14 \) m, and slant height \( l = 20 \) m. The formula for the curved surface area (CSA) of a cone is: \[ \text{CSA} = \pi r l \] Substituting the values: \[ \text{CSA} = \frac{22}{7} \times 14 \times 20 \] Simplifying \( \frac{14}{7} = 2 \): \[ \text{CSA} = 22 \times 2 \times 20 \] \[ \text{CSA} = 22 \times 40 \] \[ \text{CSA} = 880 \text{ m}^2 \]

Answer: Curved Surface Area \( = 880 \) m\(^2\)

🎯 Try a Similar Question

Try a Similar Question

Question: A right circular cone has a base radius of 9 cm and a slant height of 15 cm. Find its curved surface area. (Use \( \pi = \frac{22}{7} \))

Solution

  1. Step 1: Identify the given values: Base radius \( r = 9 \) cm and slant height \( l = 15 \) cm.
  2. Step 2: Write the formula for Curved Surface Area: The curved surface area (CSA) of a right circular cone is given by: \[ \text{CSA} = \pi r l \]
  3. Step 3: Substitute the values: Substituting \( \pi = \frac{22}{7} \), \( r = 9 \) cm, and \( l = 15 \) cm: \[ \text{CSA} = \frac{22}{7} \times 9 \times 15 \]
  4. Step 4: Simplify the multiplication: First, multiply \( 9 \times 15 = 135 \). So: \[ \text{CSA} = \frac{22 \times 135}{7} \] Now, \( 22 \times 135 = 2970 \). Therefore: \[ \text{CSA} = \frac{2970}{7} \]
  5. Step 5: Divide to get the final answer: Dividing, \( \frac{2970}{7} = 424.28...\approx 424.29 \) cm\(^2\). Since the numbers do not simplify to a whole number exactly, we express the answer as \( \frac{2970}{7} \) cm\(^2\) or approximately \( 424.29 \) cm\(^2\).

Answer: The curved surface area of the cone is \( \frac{2970}{7} \) cm\(^2\), which is approximately \( 424.29 \) cm\(^2\).

Everything you get with Solver7

More questions in Surface Areas And Volumes