SOLVER7 Study. Nothing Else.
Chapter 11 Examples Q3

A corn cob (see Fig. 11.5), shaped somewhat like a cone, has the radius of its broadest end as \(2.1\ cm\) and length (height) as \(20\ cm.\) If each \(1\ cm^2\) of the surface of the cob carries an average of four grains, find how many grains you would find on the entire cob.

CBSE Class 9 Maths · Surface Areas And Volumes

Solution

👶 Simple Explanation

Simple Explanation

Imagine a corn cob shaped like a tall, pointy ice cream cone. The grains of corn grow only on the outside sloping surface, not on the flat bottom circle. To count all the grains, we first figure out how big that sloping outer surface is. Once we know the surface area, we simply multiply it by 4, because 4 grains fit into every tiny square centimetre. A bigger sloping surface means more grains, just like a bigger wall needs more paint to cover it.

Answer: The curved surface area of the cob is about \( 132.73\ \text{cm}^2 \), so the total number of grains is approximately 531.

📖 Grains on a Cone-Shaped Corn Cob

Detailed Explanation

The corn cob is modelled as a cone. The grains grow all over the curved (slanting) outer surface of the cob, not on its flat circular base. So we need the curved surface area (CSA) of the cone. For a cone with base radius \( r \) and vertical height \( h \), we first find the slant height \( l \) using the Pythagoras relation \( l = \sqrt{r^2 + h^2} \), because the slant is the true length along which the curved surface lies. Once we know the curved surface area, we multiply it by the number of grains per square centimetre (4) to get the total number of grains.

Formula Used

Slant height: \( l = \sqrt{r^2 + h^2} \). Curved surface area of a cone: \( \text{CSA} = \pi r l \). Total grains: \( \text{CSA} \times 4 \).

Solution

  1. Step 1: Note the given data: Radius of the broadest end: \( r = 2.1\ \text{cm} \). Height of the cob: \( h = 20\ \text{cm} \). Grains per square centimetre: 4. We treat the cob as a cone and find its curved surface area.
  2. Step 2: Find the slant height: The slant height is found using \( l = \sqrt{r^2 + h^2} \). Substituting the values: \[ l = \sqrt{(2.1)^2 + (20)^2} \] \[ l = \sqrt{4.41 + 400} \] \[ l = \sqrt{404.41} \approx 20.11\ \text{cm} \] We use the slant height because grains lie along the sloping surface, whose length is \( l \), not the vertical height.
  3. Step 3: Write the curved surface area formula: Grains cover only the outer slanting surface, so we use the curved surface area (not total surface area, which would wrongly include the base). \[ \text{CSA} = \pi r l \] Take \( \pi = \frac{22}{7} \).
  4. Step 4: Substitute and compute the CSA: \[ \text{CSA} = \frac{22}{7} \times 2.1 \times 20.11 \] First, \( \frac{22}{7} \times 2.1 = 22 \times 0.3 = 6.6 \). Then: \[ \text{CSA} = 6.6 \times 20.11 \approx 132.73\ \text{cm}^2 \] So the curved surface area is about \( 132.73\ \text{cm}^2 \).
  5. Step 5: Find the total number of grains: Each \( 1\ \text{cm}^2 \) carries 4 grains, so multiply the area by 4: \[ \text{Total grains} = 132.73 \times 4 \approx 530.92 \] Rounding to a whole number gives about 531 grains.

Final Answer

The curved surface area of the cob is about \( 132.73\ \text{cm}^2 \), so the total number of grains is approximately 531.

Common Mistake

A common mistake is using the total surface area \( \pi r l + \pi r^2 \) or using the vertical height \( h \) in place of the slant height \( l \). Grains grow only on the curved slanting surface, so use \( \text{CSA} = \pi r l \) with \( l = \sqrt{r^2 + h^2} \).

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Identify the given information: base radius \( r = 2.1 \text{ cm} \), vertical height \( h = 20 \text{ cm} \), and grain density \( = 4 \) grains per \( \text{cm}^2 \). The corn cob is modelled as a cone. — Reason: Listing known values first keeps the solution organised and makes it easy to choose the right formula.
  2. Step 2: Calculate the slant height \( l \) using the Pythagorean relation \( l = \sqrt{r^2 + h^2} \). Substituting the values: \[l = \sqrt{(2.1)^2 + (20)^2}\] \[l = \sqrt{4.41 + 400}\] \[l = \sqrt{404.41} \approx 20.11 \text{ cm}\] — Reason: The slant height is the actual length along the sloping surface of the cone, which is what the grains lie on. The vertical height \( h \) alone does not describe the slant distance.
  3. Step 3: Write the curved surface area formula for a cone: \[\text{CSA} = \pi r l\] — Reason: Grains coat only the outer slanting surface of the cob, not the flat circular base. So we use CSA, not total surface area, to avoid overcounting.
  4. Step 4: Substitute the known values \( \pi \approx \frac{22}{7} \), \( r = 2.1 \text{ cm} \), and \( l \approx 20.11 \text{ cm} \) into the CSA formula: \[\text{CSA} = \frac{22}{7} \times 2.1 \times 20.11\] \[\text{CSA} = \frac{22}{7} \times 42.231\] \[\text{CSA} \approx \frac{22 \times 42.231}{7}\] \[\text{CSA} \approx \frac{929.082}{7} \approx 132.73 \text{ cm}^2\] — Reason: Plugging in numerical values gives the actual area of the conical surface that is covered by grains.
  5. Step 5: Find the total number of grains by multiplying the curved surface area by the grain density: \[\text{Total grains} = 132.73 \times 4 \approx 530.92 \approx 531\] — Reason: Since 4 grains occupy every \( 1 \text{ cm}^2 \) of the surface, multiplying the total area by 4 gives the total count of grains on the entire cob.

Final Answer

The curved surface area of the cob is about \( 132.73\ \text{cm}^2 \), so the total number of grains is approximately 531.

Common Mistake

One common mistake: using the vertical height \( h \) instead of the slant height \( l \) in the CSA formula. The formula \( \text{CSA} = \pi r l \) requires the slant height \( l \), not \( h \); forgetting to compute \( l = \sqrt{r^2 + h^2} \) leads to a significantly smaller and incorrect answer.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given: \( r = 2.1\ \text{cm} \), \( h = 20\ \text{cm} \), grains per cm\(^2\) \( = 4 \)
  2. Step 2: Slant height: \( l = \sqrt{(2.1)^2 + (20)^2} = \sqrt{4.41 + 400} = \sqrt{404.41} \approx 20.11\ \text{cm} \)
  3. Step 3: CSA \( = \pi r l = \frac{22}{7} \times 2.1 \times 20.11 \approx 132.73\ \text{cm}^2 \)
  4. Step 4: Total grains \( = 132.73 \times 4 \approx 531 \)

Answer: The curved surface area of the cob is about \( 132.73\ \text{cm}^2 \), so the total number of grains is approximately 531.

➕ More Examples

More Examples

Example 1

Question: A decorative party hat is shaped like a cone. The radius of its base is 3.5 cm and its height is 24 cm. The outer surface of the hat is covered with tiny star-shaped stickers, with an average of 6 stickers per cm². Find the total number of stickers on the hat. (Use \( \pi = \frac{22}{7} \))

Solution: Given: radius \( r = 3.5 \) cm, height \( h = 24 \) cm, sticker density \( = 6 \) stickers per cm². Step 1: Find the slant height \( l \). \[ l = \sqrt{r^2 + h^2} \] \[ l = \sqrt{(3.5)^2 + (24)^2} \] \[ l = \sqrt{12.25 + 576} \] \[ l = \sqrt{588.25} \] \[ l = 24.25 \text{ cm (approximately)} \] Step 2: Calculate the curved surface area. \[ \text{CSA} = \pi r l \] \[ \text{CSA} = \frac{22}{7} \times 3.5 \times 24.25 \] First, \( \frac{22}{7} \times 3.5 = \frac{22 \times 3.5}{7} = \frac{77}{7} = 11 \). So, \( \text{CSA} = 11 \times 24.25 = 266.75 \) cm². Step 3: Find the total number of stickers. \[ \text{Total stickers} = \text{CSA} \times \text{stickers per cm}^2 \] \[ \text{Total stickers} = 266.75 \times 6 \] \[ \text{Total stickers} = 1600.5 \approx 1601 \]

Answer: Approximately 1601 stickers.

Example 2

Question: A sandcastle turret is modelled as a cone with a base radius of 1.4 cm and a height of 4.8 cm. On average, 10 sand grains occupy each cm² of its surface. How many sand grains cover the entire curved surface of the turret? (Use \( \pi = \frac{22}{7} \))

Solution: Given: radius \( r = 1.4 \) cm, height \( h = 4.8 \) cm, grain density \( = 10 \) grains per cm². Step 1: Find the slant height \( l \). \[ l = \sqrt{r^2 + h^2} \] \[ l = \sqrt{(1.4)^2 + (4.8)^2} \] \[ l = \sqrt{1.96 + 23.04} \] \[ l = \sqrt{25} \] \[ l = 5 \text{ cm} \] Step 2: Calculate the curved surface area. \[ \text{CSA} = \pi r l \] \[ \text{CSA} = \frac{22}{7} \times 1.4 \times 5 \] First, \( \frac{22}{7} \times 1.4 = \frac{22 \times 1.4}{7} = \frac{30.8}{7} = 4.4 \). So, \( \text{CSA} = 4.4 \times 5 = 22 \) cm². Step 3: Find the total number of sand grains. \[ \text{Total grains} = \text{CSA} \times \text{grains per cm}^2 \] \[ \text{Total grains} = 22 \times 10 \] \[ \text{Total grains} = 220 \]

Answer: 220 sand grains.

🎯 Try a Similar Question

Try a Similar Question

Question: A decorative ice-cream cone prop used in a display has a base radius of 3.5 cm and a height of 12 cm. The surface of the prop is to be covered with small sequins, and each 1 cm² of its curved surface holds exactly 6 sequins on average. Find the total number of sequins required to cover the entire curved surface of the cone prop. (Use \( \pi = \frac{22}{7} \))

Solution

  1. Step 1: Identify the given values: Base radius of the cone: \( r = 3.5 \) cm. Height of the cone: \( h = 12 \) cm. Number of sequins per cm\(^2\) = 6.
  2. Step 2: Find the slant height: Using the Pythagorean theorem, the slant height is \[ l = \sqrt{r^2 + h^2} \] Substituting the values: \[ l = \sqrt{(3.5)^2 + (12)^2} \] \[ l = \sqrt{12.25 + 144} \] \[ l = \sqrt{156.25} \] \[ l = 12.5 \text{ cm} \]
  3. Step 3: Calculate the curved surface area: The curved surface area of the cone is \[ \text{CSA} = \pi r l \] Substituting \( \pi = \frac{22}{7} \), \( r = 3.5 \) cm, and \( l = 12.5 \) cm: \[ \text{CSA} = \frac{22}{7} \times 3.5 \times 12.5 \] \[ \text{CSA} = \frac{22}{7} \times 43.75 \] \[ \text{CSA} = \frac{962.5}{7} \] \[ \text{CSA} = 137.5 \text{ cm}^2 \]
  4. Step 4: Find the total number of sequins: Since each 1 cm\(^2\) holds 6 sequins, the total number of sequins is \[ \text{Total sequins} = \text{CSA} \times 6 \] \[ \text{Total sequins} = 137.5 \times 6 \] \[ \text{Total sequins} = 825 \]

Answer: The curved surface area of the cone prop is \( 137.5 \text{ cm}^2 \), so the total number of sequins required is 825.

Everything you get with Solver7

More questions in Surface Areas And Volumes