Detailed Explanation
A conical tomb is shaped like a cone. When we white-wash its outer surface, we cover only the curved (slanted) part, not the flat circular base. So we need the curved surface area (CSA) of the cone. The CSA depends on the radius of the base and the slant height. Here we are given the base diameter, so we first find the radius by halving the diameter. Once we know the area, we multiply it by the rate (cost per unit area) to get the total cost.
Formula Used
Curved Surface Area of a cone: \( \text{CSA} = \pi r l \), where \( r \) is the base radius and \( l \) is the slant height. Cost = Area \( \times \) Rate per unit area.
Solution
- Step 1: Write down the given values. The slant height is \( l = 25\ \text{m} \) and the base diameter is \( 14\ \text{m} \). We are also told to use \( \pi = \frac{22}{7} \).
- Step 2: Find the radius. The radius is half of the diameter, so \[ r = \frac{14}{2} = 7\ \text{m}. \] We do this because the CSA formula uses the radius, not the diameter.
- Step 3: Apply the curved surface area formula. \[ \text{CSA} = \pi r l \] Substituting the values: \[ \text{CSA} = \frac{22}{7} \times 7 \times 25 \]
- Step 4: Simplify to find the area. The 7 in the denominator cancels with the radius 7: \[ \text{CSA} = 22 \times 25 = 550\ \text{m}^2. \] So the curved surface to be white-washed is \( 550\ \text{m}^2 \).
- Step 5: Calculate the cost. The rate is ₹210 per \( 100\ \text{m}^2 \), which means each square metre costs \( \frac{210}{100} \) rupees. So: \[ \text{Cost} = 550 \times \frac{210}{100} \]
- Step 6: Finish the arithmetic. \[ \text{Cost} = \frac{550 \times 210}{100} = \frac{115500}{100} = 1155. \] So the total cost is ₹1155.
Final Answer
The curved surface area is \( 550\ \text{m}^2 \), and the cost of white-washing is ₹1155.
Common Mistake
A very common mistake is using the diameter \( 14\ \text{m} \) directly as the radius in the formula. Always halve the diameter first to get \( r = 7\ \text{m} \). Another mistake is including the base area by using total surface area; white-washing covers only the curved surface, so use \( \pi r l \) only.