Detailed Explanation
A hemispherical bowl is exactly half of a sphere. When we tin-plate it on the INSIDE, we are covering only the curved inner surface (not the flat circular rim area). So we need the curved surface area of a hemisphere. The curved surface area of a hemisphere is half the surface area of a full sphere, giving \( 2\pi r^2 \). Once we know this area in square centimetres, cost is found by multiplying the area by the rate per unit area. Here the rate is given per \( 100\ cm^2 \), so we divide the area by 100 and then multiply by \( \text{₹}16 \).
Formula Used
Curved surface area of a hemisphere: \[ \text{CSA} = 2\pi r^2 \] Cost formula: \[ \text{Cost} = \frac{\text{Area}}{100} \times \text{rate} \]
Solution
- Step 1: Find the inner radius from the inner diameter. The inner diameter is given as \( 10.5\ cm \), so the radius is half of that. \[ r = \frac{10.5}{2} = 5.25\ cm \]
- Step 2: Since only the inside curved part is tin-plated, we use the curved surface area of a hemisphere. \[ \text{CSA} = 2\pi r^2 \] Substituting \( \pi = \frac{22}{7} \) and \( r = 5.25\ cm \): \[ \text{CSA} = 2 \times \frac{22}{7} \times (5.25)^2 \]
- Step 3: Compute \( (5.25)^2 \) and simplify. \[ (5.25)^2 = 27.5625 \] So: \[ \text{CSA} = 2 \times \frac{22}{7} \times 27.5625 \] First, \[ \frac{22}{7} \times 27.5625 = \frac{22 \times 27.5625}{7} = \frac{606.375}{7} = 86.625 \] Then: \[ \text{CSA} = 2 \times 86.625 = 173.25\ cm^2 \]
- Step 4: Now find the cost. The rate is \( \text{₹}16 \) for every \( 100\ cm^2 \). \[ \text{Cost} = \frac{173.25}{100} \times 16 \] Simplify: \[ \text{Cost} = 1.7325 \times 16 = 27.72 \]
- Step 5: State the final result. The cost of tin-plating the inside of the bowl is \( \text{₹}27.72 \).
Final Answer
The inner curved surface area is \( 173.25\ cm^2 \) and the cost of tin-plating it is \( \text{₹}27.72 \).
Common Mistake
A common mistake is using the full sphere surface area \( 4\pi r^2 \) or adding the flat top. For plating only the inside curved part of a hemisphere, use \( 2\pi r^2 \) only. Also remember to halve the diameter to get the radius, and to divide the area by 100 (not multiply) since the rate is per \( 100\ cm^2 \).