Detailed Explanation
A joker's cap is a right circular cone that is open at the bottom (no base). So the sheet needed for one cap is only the curved (lateral) surface of the cone, NOT the total surface area. To find the curved surface area of a cone we first need its slant height \( l \), because the curved surface uses \( l \), not the vertical height \( h \). The slant height is the distance from the tip of the cone to a point on the edge of the circular base, and it is found using the relation \( l = \sqrt{r^2 + h^2} \). Once we know the area of one cap, we multiply by 10 to get the total sheet required for 10 caps.
Formula Used
Slant height: \( l = \sqrt{r^2 + h^2} \). Curved surface area of a cone: \( \text{CSA} = \pi r l \).
Solution
- Step 1: Note down the given values. Base radius \( r = 7 \) cm and vertical height \( h = 24 \) cm. We use \( \pi = \frac{22}{7} \).
- Step 2: Find the slant height \( l \), since the curved surface area formula needs \( l \) and not \( h \). \[ l = \sqrt{r^2 + h^2} \] Substitute the values: \[ l = \sqrt{7^2 + 24^2} \] \[ l = \sqrt{49 + 576} \] \[ l = \sqrt{625} = 25 \text{ cm} \]
- Step 3: Find the curved surface area of one cap. Since the cap is open at the bottom, only the curved surface is made of sheet. \[ \text{CSA} = \pi r l \] \[ \text{CSA} = \frac{22}{7} \times 7 \times 25 \] The \( 7 \) cancels with the denominator: \[ \text{CSA} = 22 \times 25 = 550 \text{ cm}^2 \]
- Step 4: Find the sheet needed for 10 caps by multiplying the area of one cap by 10. \[ \text{Total area} = 10 \times 550 \] \[ \text{Total area} = 5500 \text{ cm}^2 \]
Final Answer
The sheet required to make 10 such caps is \( 5500 \text{ cm}^2 \).
Common Mistake
A very common mistake is to use the vertical height \( h = 24 \) cm directly in \( \pi r l \), or to use total surface area \( \pi r l + \pi r^2 \). Since a cap is open at the base, we use only the curved surface area \( \pi r l \), and we must first compute the slant height \( l = 25 \) cm before applying it.