Detailed Explanation
A cone has two surfaces we need to account for: the curved (lateral) surface that wraps around it, and the flat circular base at the bottom. The curved surface area of a cone is given by \( \pi r l \), where \( r \) is the base radius and \( l \) is the slant height. The base is a circle, so its area is \( \pi r^2 \). The total surface area is simply the sum of these two areas. A common point to remember is that the diameter is twice the radius, so if you are given the diameter you must first halve it to get \( r \).
Formula Used
Total Surface Area of a cone \( = \pi r l + \pi r^2 = \pi r (l + r) \), where \( r \) is the base radius and \( l \) is the slant height.
Solution
- Step 1: Write down the given values. The slant height is \( l = 21 \) m and the diameter of the base is \( 24 \) m. We also use \( \pi = \frac{22}{7} \).
- Step 2: Find the radius from the diameter. Since the radius is half the diameter: \[ r = \frac{24}{2} = 12 \text{ m} \]
- Step 3: Write the total surface area formula. We use the combined form because it makes the calculation shorter: \[ \text{Total Surface Area} = \pi r (l + r) \]
- Step 4: Substitute the known values into the formula. Put \( r = 12 \), \( l = 21 \) and \( \pi = \frac{22}{7} \): \[ \text{TSA} = \frac{22}{7} \times 12 \times (21 + 12) \]
- Step 5: Simplify inside the bracket first, then multiply: \[ \text{TSA} = \frac{22}{7} \times 12 \times 33 \]
- Step 6: Now compute the value. Multiply the numbers together: \[ \text{TSA} = \frac{22 \times 12 \times 33}{7} = \frac{8712}{7} \] Dividing gives: \[ \text{TSA} = 1244.57 \text{ m}^2 \text{ (approximately)} \]
Final Answer
The total surface area of the cone is \( \frac{8712}{7} \text{ m}^2 \approx 1244.57 \text{ m}^2 \).
Common Mistake
A very common mistake is using the diameter (24 m) directly as the radius in the formula. Always halve the diameter first to get \( r = 12 \) m. Another mistake is forgetting to add the base area \( \pi r^2 \) and calculating only the curved surface area \( \pi r l \).