SOLVER7 Study. Nothing Else.
Exercise 11.1 Q1

Diameter of the base of a cone is \(10.5\ cm\) and its slant height is \(10\ cm.\) Find its curved surface area.
\([Hint:\) Assume \(\pi=\dfrac{22}{7}].\)

CBSE Class 9 Maths · Surface Areas And Volumes

Solution

👶 Simple Explanation

Simple Explanation

Imagine an ice cream cone with no ice cream inside. The outer wrapping — the pointy paper part — is called the curved surface. We want to find how much paper was used to make just that outer wrapping. The cone is 10.5 cm wide at the open top and has a slant length of 10 cm along its side. Multiplying the radius (half the width), the slant length, and a special number called \( \pi \) gives us the area of that wrapping. The answer comes out to 165 square centimetres.

Answer: The curved surface area of the cone is \( 165\ \text{cm}^2 \).

📖 Curved Surface Area of a Cone

Detailed Explanation

A cone has a flat circular base and a curved surface that tapers to a point (the apex). The slant height \( l \) is the distance from the apex to any point on the edge of the base along the curved surface. The curved surface area (CSA) is the area of only the slanted (lateral) surface, not including the base. To use the formula we need the radius of the base, so if the diameter is given we must first halve it to get the radius.

Formula Used

Curved surface area of a cone \( = \pi r l \), where \( r \) is the base radius and \( l \) is the slant height.

Solution

  1. Step 1: Write down what is given. The diameter of the base is \( 10.5\ \text{cm} \) and the slant height is \( l = 10\ \text{cm} \).
  2. Step 2: Find the radius. Since the radius is half the diameter, \[ r = \frac{10.5}{2} = 5.25\ \text{cm}. \] We can also write this as \( r = \frac{21}{4}\ \text{cm} \) to make the fraction arithmetic easier.
  3. Step 3: Write the formula for curved surface area of a cone. \[ \text{CSA} = \pi r l \] We use this formula because we only want the slanted surface, and \( \pi = \frac{22}{7} \) is given in the hint.
  4. Step 4: Substitute the values. \[ \text{CSA} = \frac{22}{7} \times \frac{21}{4} \times 10 \]
  5. Step 5: Simplify step by step. First \( \frac{22}{7} \times \frac{21}{4} \): here \( 21 \div 7 = 3 \), so \[ \frac{22}{7} \times \frac{21}{4} = \frac{22 \times 3}{4} = \frac{66}{4} = \frac{33}{2}. \] Now multiply by \( 10 \): \[ \frac{33}{2} \times 10 = \frac{330}{2} = 165. \]
  6. Step 6: Attach the correct unit. Since area is measured in square centimetres, the curved surface area is \( 165\ \text{cm}^2 \).

Final Answer

The curved surface area of the cone is \( 165\ \text{cm}^2 \).

Common Mistake

A common mistake is using the diameter \( 10.5\ \text{cm} \) directly in the formula instead of the radius \( 5.25\ \text{cm} \). Always convert diameter to radius by dividing by 2 before substituting into \( \pi r l \).

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: List the given information: diameter of base \( = 10.5 \text{ cm} \) and slant height \( l = 10 \text{ cm} \). — Reason: Identifying what is given prevents confusion between diameter and radius later.
  2. Step 2: Convert diameter to radius. Since radius is half the diameter: \[ r = \frac{10.5}{2} = \frac{21}{4} \text{ cm} \] — Reason: The CSA formula requires the radius, not the diameter; writing it as \( \frac{21}{4} \) keeps fraction arithmetic clean.
  3. Step 3: Write out the formula and substitute all known values: \[ \text{CSA} = \pi r l = \frac{22}{7} \times \frac{21}{4} \times 10 \] — Reason: Plugging values in all at once makes it easier to spot cancellations before multiplying.
  4. Step 4: Simplify \( \frac{22}{7} \times \frac{21}{4} \) first. Notice that \( 21 \div 7 = 3 \), so: \[ \frac{22}{7} \times \frac{21}{4} = \frac{22 \times 3}{4} = \frac{66}{4} = \frac{33}{2} \] — Reason: Cancelling 7 with 21 reduces large numbers and avoids messy multiplication.
  5. Step 5: Multiply the result by \( l = 10 \): \[ \frac{33}{2} \times 10 = \frac{330}{2} = 165 \] — Reason: This completes the substitution and gives the final numerical value of the CSA.
  6. Step 6: Attach the correct unit. Area is measured in square centimetres, so the curved surface area \( = 165 \text{ cm}^2 \). — Reason: A numerical answer without units is incomplete in a geometry problem.

Final Answer

The curved surface area of the cone is \( 165\ \text{cm}^2 \).

Common Mistake

One common mistake: using the diameter \( 10.5 \text{ cm} \) directly in place of the radius in the formula \( \pi r l \), which would double the correct answer and give \( 330 \text{ cm}^2 \) instead of \( 165 \text{ cm}^2 \).

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given: diameter \( = 10.5\ \text{cm} \), so \( r = \frac{10.5}{2} = \frac{21}{4}\ \text{cm} \); slant height \( l = 10\ \text{cm} \)
  2. Step 2: Substitute into formula: \[ \text{CSA} = \frac{22}{7} \times \frac{21}{4} \times 10 \]
  3. Step 3: Simplify: \( \frac{22}{7} \times \frac{21}{4} = \frac{22 \times 3}{4} = \frac{33}{2} \), then \( \frac{33}{2} \times 10 = 165\ \text{cm}^2 \)

Answer: The curved surface area of the cone is \( 165\ \text{cm}^2 \).

➕ More Examples

More Examples

Example 1

Question: The diameter of the base of a cone is 14 cm and its slant height is 9 cm. Find the curved surface area of the cone. (Use \( \pi = \dfrac{22}{7} \))

Solution: Step 1: Find the radius of the base. The diameter is 14 cm, so the radius is \[ r = \frac{14}{2} = 7 \text{ cm} \] Step 2: Note the slant height. The slant height is given as \( l = 9 \) cm. Step 3: Apply the formula for curved surface area. \[ \text{CSA} = \pi r l \] Substituting the values: \[ \text{CSA} = \frac{22}{7} \times 7 \times 9 \] Simplifying \( \frac{22}{7} \times 7 = 22 \): \[ \text{CSA} = 22 \times 9 = 198 \text{ cm}^2 \]

Answer: Curved Surface Area = 198 cm\(^2\)

Example 2

Question: A conical tent has a base circumference of 66 m and a slant height of 12 m. Find the curved surface area of the tent. (Use \( \pi = \dfrac{22}{7} \))

Solution: Step 1: Find the radius from the circumference. The circumference of the base is \( 2\pi r = 66 \) m. \[ r = \frac{66}{2\pi} = \frac{66}{2 \times \dfrac{22}{7}} = \frac{66 \times 7}{44} = \frac{462}{44} = 10.5 \text{ m} \] Step 2: Note the slant height. The slant height is given as \( l = 12 \) m. Step 3: Apply the formula for curved surface area. \[ \text{CSA} = \pi r l \] Substituting the values: \[ \text{CSA} = \frac{22}{7} \times 10.5 \times 12 \] First, \( \frac{22}{7} \times 10.5 = \frac{22 \times 10.5}{7} = \frac{231}{7} = 33 \). Then: \[ \text{CSA} = 33 \times 12 = 396 \text{ m}^2 \]

Answer: Curved Surface Area = 396 m\(^2\)

🎯 Try a Similar Question

Try a Similar Question

Question: The diameter of the base of a cone is \( 14 \ \text{cm} \) and its slant height is \( 9 \ \text{cm} \). Find its curved surface area. [Hint: Assume \( \pi = \dfrac{22}{7} \)].

Solution

  1. Step 1: Find the radius of the base: The diameter of the base is \( 14 \ \text{cm} \). The radius is half the diameter: \[ r = \frac{14}{2} = 7 \ \text{cm} \]
  2. Step 2: Note the slant height: The slant height is given as \( l = 9 \ \text{cm} \).
  3. Step 3: Apply the formula for curved surface area: The curved surface area of a cone is given by \[ \text{CSA} = \pi r l \] Substituting \( \pi = \dfrac{22}{7} \), \( r = 7 \ \text{cm} \), and \( l = 9 \ \text{cm} \): \[ \text{CSA} = \frac{22}{7} \times 7 \times 9 \]
  4. Step 4: Simplify the calculation: Simplifying step by step: \[ \frac{22}{7} \times 7 = 22 \] Then: \[ 22 \times 9 = 198 \] So the curved surface area is \( 198 \ \text{cm}^2 \).

Answer: The curved surface area of the cone is \( 198 \ \text{cm}^2 \).

Everything you get with Solver7

More questions in Surface Areas And Volumes