SOLVER7 Study. Nothing Else.
Exercise 12.1 Q8

A random survey of the number of children of various age groups playing in a park was found as follows: Draw a histogram to represent the data above.

CBSE Class 9 Maths · Statistics

Solution

👶 Simple Explanation

Simple Explanation

Imagine drawing tall boxes side by side to show how many children fall in each age group. Some age groups are wider than others, like a big shelf versus a small one. If we just used the raw count for height, wider shelves would look unfairly tall. So we shrink the height of wider boxes to keep things fair. That way, the area of each box, not just its height, tells the true story about how many children belong there.

Answer: The required histogram is drawn with age groups on the x-axis and adjusted heights on the y-axis. The adjusted heights (lengths of rectangles) are: 1-2 has height 5, 2-3 has height 3, 3-5 has height 3, 5-7 has height 6, 7-10 has height 3, 10-15 has height 2, 15-17 has height 2. Because the class widths are unequal, these adjusted heights (not the raw frequencies) are used so that the area of each bar stays proportional to the number of children.

📖 Histogram for Children Playing in a Park

Detailed Explanation

A histogram is a graphical way of showing data that is grouped into class intervals. Along the horizontal axis (x-axis) we mark the class intervals (here the age groups), and along the vertical axis (y-axis) we mark the frequency (here the number of children). In a histogram we draw rectangles (bars) whose bases lie on the class intervals and whose heights represent the frequency. Since the class intervals are continuous, the bars are drawn adjacent to each other with no gaps. A very important point in THIS question is that the class intervals are NOT of equal width. For example, 1-2 has width 1, while 5-7 has width 2 and 10-15 has width 5. When widths are unequal, we cannot use the frequency directly as the height, because a wider class would look taller and mislead us. Instead, the AREA of each rectangle must be proportional to the frequency. So we adjust the height using the smallest class width as the standard.

Formula Used

Adjusted height (length of rectangle) is given by \[ \text{Adjusted height} = \frac{\text{Minimum class width}}{\text{Class width}} \times \text{Frequency} \]

Solution

  1. Step 1: Write the given data in table form. Age in years (class interval) and number of children (frequency): 1-2 gives 5, 2-3 gives 3, 3-5 gives 6, 5-7 gives 12, 7-10 gives 9, 10-15 gives 10, 15-17 gives 4.
  2. Step 2: Find the width of each class interval by subtracting the lower limit from the upper limit. Widths are: 1-2 has width 1, 2-3 has width 1, 3-5 has width 2, 5-7 has width 2, 7-10 has width 3, 10-15 has width 5, 15-17 has width 2. Since these widths are NOT equal, we must adjust the heights.
  3. Step 3: Identify the minimum (smallest) class width. Here the smallest width is 1. We will use this as the standard width to make all bars comparable by keeping area proportional to frequency.
  4. Step 4: Calculate the adjusted height of each rectangle using \[ \text{Adjusted height} = \frac{1}{\text{class width}} \times \text{frequency} \] For 1-2: \( \frac{1}{1} \times 5 = 5 \). For 2-3: \( \frac{1}{1} \times 3 = 3 \). For 3-5: \( \frac{1}{2} \times 6 = 3 \). For 5-7: \( \frac{1}{2} \times 12 = 6 \).
  5. Step 5: Continue the calculation for the remaining classes. For 7-10: \( \frac{1}{3} \times 9 = 3 \). For 10-15: \( \frac{1}{5} \times 10 = 2 \). For 15-17: \( \frac{1}{2} \times 4 = 2 \). These adjusted heights (5, 3, 3, 6, 3, 2, 2) are the true lengths of the rectangles.
  6. Step 6: Draw the axes. On the x-axis mark the age groups (class intervals) starting from 1 up to 17, using a suitable scale. On the y-axis mark the adjusted heights (proportional to number of children per unit age). Choose a convenient scale, for example 1 cm = 1 unit of adjusted height.
  7. Step 7: On each class interval draw a rectangle whose height equals the adjusted height found above: 1-2 up to 5, 2-3 up to 3, 3-5 up to 3, 5-7 up to 6, 7-10 up to 3, 10-15 up to 2, 15-17 up to 2. Draw the bars adjacent to each other with no gaps, since the data is continuous. This completed figure is the required histogram.

Final Answer

The required histogram is drawn with age groups on the x-axis and adjusted heights on the y-axis. The adjusted heights (lengths of rectangles) are: 1-2 has height 5, 2-3 has height 3, 3-5 has height 3, 5-7 has height 6, 7-10 has height 3, 10-15 has height 2, 15-17 has height 2. Because the class widths are unequal, these adjusted heights (not the raw frequencies) are used so that the area of each bar stays proportional to the number of children.

Common Mistake

The most common mistake is drawing the bars using the raw frequencies (5, 3, 6, 12, 9, 10, 4) directly as heights, forgetting that the class intervals have unequal widths. This makes wider classes look wrongly tall. Always adjust the height using minimum width divided by class width times frequency when the widths are unequal.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Record the given data clearly in a table. The age groups (class intervals) and their corresponding number of children (frequencies) are: 1–2 has 5 children, 2–3 has 3 children, 3–5 has 6 children, 5–7 has 12 children, 7–10 has 9 children, 10–15 has 10 children, and 15–17 has 4 children. — Reason: Organising the data first ensures no values are missed before any calculations begin.
  2. Step 2: Calculate the width of each class interval by subtracting its lower boundary from its upper boundary. For 1–2: width = \( 2 - 1 = 1 \). For 2–3: width = \( 3 - 2 = 1 \). For 3–5: width = \( 5 - 3 = 2 \). For 5–7: width = \( 7 - 5 = 2 \). For 7–10: width = \( 10 - 7 = 3 \). For 10–15: width = \( 15 - 10 = 5 \). For 15–17: width = \( 17 - 15 = 2 \). — Reason: Knowing each class width is essential because unequal widths mean we cannot use raw frequencies as bar heights directly.
  3. Step 3: Identify the minimum (smallest) class width from the list calculated above. The widths are 1, 1, 2, 2, 3, 5, and 2, so the minimum class width is \( 1 \). — Reason: The smallest width becomes our standard reference; all other bars are scaled relative to this value so that areas stay proportional to frequencies.
  4. Step 4: Apply the adjusted height formula to each class interval. Using \(\text{Adjusted Height} = \frac{\text{Minimum Width}}{\text{Class Width}} \times \text{Frequency}\): For 1–2: \( \frac{1}{1} \times 5 = 5 \). For 2–3: \( \frac{1}{1} \times 3 = 3 \). For 3–5: \( \frac{1}{2} \times 6 = 3 \). For 5–7: \( \frac{1}{2} \times 12 = 6 \). For 7–10: \( \frac{1}{3} \times 9 = 3 \). For 10–15: \( \frac{1}{5} \times 10 = 2 \). For 15–17: \( \frac{1}{2} \times 4 = 2 \). — Reason: Dividing by the class width and multiplying by the minimum width compresses wider bars proportionally, ensuring the area (not just height) of every bar faithfully represents the frequency.
  5. Step 5: Compile the final adjusted-height table. Class interval 1–2 gets adjusted height 5; 2–3 gets 3; 3–5 gets 3; 5–7 gets 6; 7–10 gets 3; 10–15 gets 2; 15–17 gets 2. — Reason: Summarising these values in one place makes it straightforward to mark the y-axis and draw each bar accurately on the histogram.
  6. Step 6: Draw the histogram. Mark the age groups along the x-axis (horizontal) and the adjusted heights along the y-axis (vertical). For each class interval, draw a rectangle whose base spans the class interval and whose height equals the corresponding adjusted height found in Step 5. Since age is a continuous variable, all bars must be drawn touching each other with no gaps between them. — Reason: Using adjusted heights on the y-axis and continuous adjacent bars is what makes this a correct histogram for unequal class widths, where the visual area of each bar equals the frequency.

Final Answer

The required histogram is drawn with age groups on the x-axis and adjusted heights on the y-axis. The adjusted heights (lengths of rectangles) are: 1-2 has height 5, 2-3 has height 3, 3-5 has height 3, 5-7 has height 6, 7-10 has height 3, 10-15 has height 2, 15-17 has height 2. Because the class widths are unequal, these adjusted heights (not the raw frequencies) are used so that the area of each bar stays proportional to the number of children.

Common Mistake

One common mistake: Students often use the raw frequency directly as the bar height even when class widths are unequal. For example, using height 12 for the class 5–7 instead of the adjusted height 6 makes that bar look far too tall, giving a misleading picture of the data distribution.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Identify class widths and minimum width: Widths: 1-2 \(\to 1\), 2-3 \(\to 1\), 3-5 \(\to 2\), 5-7 \(\to 2\), 7-10 \(\to 3\), 10-15 \(\to 5\), 15-17 \(\to 2\). Minimum width \(= 1\).
  2. Step 2: Compute adjusted heights: Using \(\frac{1}{\text{width}} \times \text{frequency}\): 1-2: \(\frac{1}{1}\times 5 = 5\), 2-3: \(\frac{1}{1}\times 3 = 3\), 3-5: \(\frac{1}{2}\times 6 = 3\), 5-7: \(\frac{1}{2}\times 12 = 6\), 7-10: \(\frac{1}{3}\times 9 = 3\), 10-15: \(\frac{1}{5}\times 10 = 2\), 15-17: \(\frac{1}{2}\times 4 = 2\).
  3. Step 3: Draw histogram: Plot age groups on the x-axis and adjusted heights on the y-axis; draw adjacent bars with the computed heights.

Answer: The required histogram is drawn with age groups on the x-axis and adjusted heights on the y-axis. The adjusted heights (lengths of rectangles) are: 1-2 has height 5, 2-3 has height 3, 3-5 has height 3, 5-7 has height 6, 7-10 has height 3, 10-15 has height 2, 15-17 has height 2. Because the class widths are unequal, these adjusted heights (not the raw frequencies) are used so that the area of each bar stays proportional to the number of children.

➕ More Examples

More Examples

Example 1

Question: The weekly pocket money (in rupees) of 40 students in a school was recorded and grouped as shown below. Draw a histogram to represent the data. Pocket Money (in Rs) | Number of Students 0 – 50 | 4 50 – 100 | 8 100 – 150 | 12 150 – 200 | 10 200 – 250 | 6

Solution: Step 1: List the class intervals and frequencies. Class interval 0–50 has frequency 4. Class interval 50–100 has frequency 8. Class interval 100–150 has frequency 12. Class interval 150–200 has frequency 10. Class interval 200–250 has frequency 6. Step 2: Check class widths. Each class width = \[100 - 50 = 50\] All class widths are equal (each is 50), so the height of each bar equals its frequency. Step 3: Set up the axes. The x-axis represents pocket money (in Rs), marked at 0, 50, 100, 150, 200, 250. The y-axis represents the number of students, marked from 0 upward to at least 12. Step 4: Draw the bars. Bar for 0–50: height = 4 Bar for 50–100: height = 8 Bar for 100–150: height = 12 Bar for 150–200: height = 10 Bar for 200–250: height = 6 All bars are drawn adjacent to each other (no gaps). The tallest bar is for the class interval 100–150 with height 12. Step 5: Verify the total frequency. \[4 + 8 + 12 + 10 + 6 = 40\] This matches the given total of 40 students, confirming the data is correctly represented.

Answer: A histogram with 5 adjacent bars over the x-axis intervals 0–50, 50–100, 100–150, 150–200, and 200–250, with corresponding heights (frequencies) of 4, 8, 12, 10, and 6 respectively. The tallest bar corresponds to the 100–150 class interval.

Example 2

Question: The time (in minutes) taken by 50 commuters to travel to their workplace was recorded as follows. Draw a histogram to represent the data. Time (in minutes) | Number of Commuters 10 – 20 | 5 20 – 40 | 10 40 – 60 | 15 60 – 80 | 12 80 – 100 | 8

Solution: Step 1: List the class intervals, frequencies, and class widths. Class 10–20: frequency = 5, width = \(20 - 10 = 10\) Class 20–40: frequency = 10, width = \(40 - 20 = 20\) Class 40–60: frequency = 15, width = \(60 - 40 = 20\) Class 60–80: frequency = 12, width = \(80 - 60 = 20\) Class 80–100: frequency = 8, width = \(100 - 80 = 20\) Step 2: Check class widths. The first class interval (10–20) has width 10, while all others have width 20. Since the class widths are unequal, we must use frequency density for the heights of the bars. \[\text{Frequency Density} = \frac{\text{Frequency}}{\text{Class Width}}\] Step 3: Calculate frequency density for each class. For 10–20: \[\text{Frequency Density} = \frac{5}{10} = 0.5\] For 20–40: \[\text{Frequency Density} = \frac{10}{20} = 0.5\] For 40–60: \[\text{Frequency Density} = \frac{15}{20} = 0.75\] For 60–80: \[\text{Frequency Density} = \frac{12}{20} = 0.6\] For 80–100: \[\text{Frequency Density} = \frac{8}{20} = 0.4\] Step 4: Set up the axes. The x-axis represents time (in minutes), marked at 10, 20, 40, 60, 80, 100. The y-axis represents frequency density, marked from 0 upward to at least 0.75. Step 5: Draw the bars. Bar for 10–20: width = 10, height = 0.5 Bar for 20–40: width = 20, height = 0.5 Bar for 40–60: width = 20, height = 0.75 Bar for 60–80: width = 20, height = 0.6 Bar for 80–100: width = 20, height = 0.4 All bars are drawn adjacent to each other (no gaps). Step 6: Verify by recovering frequencies from the histogram. \[5 + 10 + 15 + 12 + 8 = 50\] This matches the total of 50 commuters, so the histogram is correctly drawn.

Answer: A histogram with 5 adjacent bars over the x-axis intervals 10–20, 20–40, 40–60, 60–80, and 80–100, with frequency densities of 0.5, 0.5, 0.75, 0.6, and 0.4 respectively. Because class widths are unequal, the y-axis shows frequency density (not raw frequency). The tallest bar corresponds to the 40–60 minute class.

🎯 Try a Similar Question

Try a Similar Question

Question: A survey was conducted on the number of hours per week spent on outdoor activities by people of various age groups in a housing society. The data is given below: Age group (in years): 0–4, 4–8, 8–12, 12–20, 20–25, 25–40, 40–50 Number of people: 8, 12, 16, 24, 10, 15, 7 Since the class widths are unequal, draw a histogram to represent the data correctly. Also compute the adjusted height (frequency density) for each class interval.

Solution

  1. Step 1: Identify Class Widths: List the class intervals and compute each class width (upper boundary minus lower boundary): Age group 0–4: width = \( 4 - 0 = 4 \) Age group 4–8: width = \( 8 - 4 = 4 \) Age group 8–12: width = \( 12 - 8 = 4 \) Age group 12–20: width = \( 20 - 12 = 8 \) Age group 20–25: width = \( 25 - 20 = 5 \) Age group 25–40: width = \( 40 - 25 = 15 \) Age group 40–50: width = \( 50 - 40 = 10 \)
  2. Step 2: Recall the Formula for Adjusted Height: Because class widths are unequal, we must use Frequency Density (adjusted height) so that the area of each bar equals the frequency. The formula is: \[ \text{Frequency Density} = \frac{\text{Frequency}}{\text{Class Width}} \]
  3. Step 3: Calculate Adjusted Height for Each Class: For age group 0–4: \( \dfrac{8}{4} = 2 \) For age group 4–8: \( \dfrac{12}{4} = 3 \) For age group 8–12: \( \dfrac{16}{4} = 4 \) For age group 12–20: \( \dfrac{24}{8} = 3 \) For age group 20–25: \( \dfrac{10}{5} = 2 \) For age group 25–40: \( \dfrac{15}{15} = 1 \) For age group 40–50: \( \dfrac{7}{10} = 0.7 \)
  4. Step 4: Verify Using Area = Frequency: Check that Area = (Adjusted Height) \( \times \) (Class Width) equals the original frequency for each bar: 0–4: \( 2 \times 4 = 8 \) ✓ 4–8: \( 3 \times 4 = 12 \) ✓ 8–12: \( 4 \times 4 = 16 \) ✓ 12–20: \( 3 \times 8 = 24 \) ✓ 20–25: \( 2 \times 5 = 10 \) ✓ 25–40: \( 1 \times 15 = 15 \) ✓ 40–50: \( 0.7 \times 10 = 7 \) ✓ All checks pass, confirming the adjusted heights are correct.
  5. Step 5: Draw the Histogram: On the horizontal axis, mark the age groups: 0, 4, 8, 12, 20, 25, 40, 50 (the class boundaries). On the vertical axis, mark the frequency density values. Draw adjacent rectangles (bars) with widths equal to the class widths and heights equal to the adjusted heights computed above. There should be no gaps between bars, and the bars should be proportional in area to the number of people in each group.

Answer: The histogram is drawn with age group (in years) on the x-axis and frequency density (adjusted height) on the y-axis. The adjusted heights for each class are: 0–4 has height 2, 4–8 has height 3, 8–12 has height 4, 12–20 has height 3, 20–25 has height 2, 25–40 has height 1, and 40–50 has height 0.7. Because the class widths are unequal, these frequency densities (not the raw frequencies) are used as bar heights so that the area of each bar remains proportional to the number of people in that age group.

Everything you get with Solver7

More questions in Statistics