SOLVER7 Study. Nothing Else.
Exercise 12.1 Q7

The runs scored by two teams \(A\) and \(B\) on the first \(60\) balls in a cricket match are given below: Represent the data of both the teams on the same graph by frequency polygons. [Hint : First make the class intervals continuous.]

CBSE Class 9 Maths · Statistics

Solution

👶 Simple Explanation

Simple Explanation

Imagine two cricket teams each keeping a scorebook. We want to draw a picture that shows how many runs each team scored in every set of 6 balls. We find the middle value of each score range, then mark a dot for how often that score appeared. We connect all the dots with lines, like a connect-the-dots drawing. Drawing both teams on the same picture lets us see at a glance who scored more runs in which range.

Answer: After converting to continuous classes, the class marks are 3.5, 9.5, 15.5, 21.5, 27.5, 33.5, 39.5, 45.5, 51.5, 57.5. Plot Team A points (3.5, 2), (9.5, 1), (15.5, 8), (21.5, 9), (27.5, 4), (33.5, 5), (39.5, 6), (45.5, 10), (51.5, 6), (57.5, 2) and Team B points (3.5, 5), (9.5, 6), (15.5, 2), (21.5, 10), (27.5, 5), (33.5, 6), (39.5, 3), (45.5, 4), (51.5, 8), (57.5, 10) on the same graph and join each set with straight lines. The two joined line graphs are the frequency polygons of Teams A and B.

📖 Frequency Polygons for Two Cricket Teams

Detailed Explanation

A frequency polygon is a line graph that shows how frequencies (here, runs scored) are distributed over class intervals. To draw it, we plot the class mark (the midpoint of each class interval) on the x-axis against the frequency on the y-axis, and then join these points with straight line segments. Since the given class intervals (1-6, 7-12, etc.) are of the inclusive (discontinuous) type, we must first convert them into continuous (exclusive) class intervals. The gap between the upper limit of one class (like 6) and the lower limit of the next class (like 7) is 1. We take half of this gap, which is 0.5, subtract it from every lower limit and add it to every upper limit. This makes the classes continuous so that the class marks can be calculated correctly and the polygon lines join smoothly. Because both teams share the same class intervals, we can plot both polygons on the same graph to compare their run distributions easily.

Formula Used

Class mark \( = \dfrac{\text{Lower limit} + \text{Upper limit}}{2} \)

Solution

  1. Step 1: Write down the given data. Number of balls (class), Team A runs, Team B runs: 1-6 gives 2 and 5; 7-12 gives 1 and 6; 13-18 gives 8 and 2; 19-24 gives 9 and 10; 25-30 gives 4 and 5; 31-36 gives 5 and 6; 37-42 gives 6 and 3; 43-48 gives 10 and 4; 49-54 gives 6 and 8; 55-60 gives 2 and 10.
  2. Step 2: Make the class intervals continuous. The gap between consecutive classes is \( 7 - 6 = 1 \). Half of this gap is \( \dfrac{1}{2} = 0.5 \). Subtract 0.5 from each lower limit and add 0.5 to each upper limit. The classes become: 0.5-6.5, 6.5-12.5, 12.5-18.5, 18.5-24.5, 24.5-30.5, 30.5-36.5, 36.5-42.5, 42.5-48.5, 48.5-54.5, 54.5-60.5.
  3. Step 3: Find the class mark of each continuous class using \( \text{Class mark} = \dfrac{\text{Lower limit} + \text{Upper limit}}{2} \). For example \( \dfrac{0.5 + 6.5}{2} = 3.5 \) and \( \dfrac{6.5 + 12.5}{2} = 9.5 \). Continuing this way, the class marks are: 3.5, 9.5, 15.5, 21.5, 27.5, 33.5, 39.5, 45.5, 51.5, 57.5.
  4. Step 4: Form the plotting points for each team. For Team A the points (class mark, runs) are: (3.5, 2), (9.5, 1), (15.5, 8), (21.5, 9), (27.5, 4), (33.5, 5), (39.5, 6), (45.5, 10), (51.5, 6), (57.5, 2). For Team B the points are: (3.5, 5), (9.5, 6), (15.5, 2), (21.5, 10), (27.5, 5), (33.5, 6), (39.5, 3), (45.5, 4), (51.5, 8), (57.5, 10).
  5. Step 5: Draw the axes. Take class marks (number of balls) along the x-axis and runs scored (frequency) along the y-axis. Choose a suitable scale, for example 1 unit on the x-axis for every 6 balls and 1 unit on the y-axis for every 1 run. Since the first class mark 3.5 is far from the origin, use a kink (zig-zag mark) on the x-axis near the origin.
  6. Step 6: Plot the points and join them. Plot all Team A points and join them with straight line segments to get one frequency polygon. Then plot all Team B points and join them with straight line segments in a different colour to get the second frequency polygon. To close each polygon properly, imaginary classes of zero frequency can be taken before the first and after the last class, but for comparison the two joined line graphs on the same axes are the required frequency polygons.

Final Answer

After converting to continuous classes, the class marks are 3.5, 9.5, 15.5, 21.5, 27.5, 33.5, 39.5, 45.5, 51.5, 57.5. Plot Team A points (3.5, 2), (9.5, 1), (15.5, 8), (21.5, 9), (27.5, 4), (33.5, 5), (39.5, 6), (45.5, 10), (51.5, 6), (57.5, 2) and Team B points (3.5, 5), (9.5, 6), (15.5, 2), (21.5, 10), (27.5, 5), (33.5, 6), (39.5, 3), (45.5, 4), (51.5, 8), (57.5, 10) on the same graph and join each set with straight lines. The two joined line graphs are the frequency polygons of Teams A and B.

Common Mistake

A very common mistake is to plot points using the lower limit or the original (discontinuous) class boundaries instead of the class marks of the continuous classes. Frequency polygons must always use class marks (midpoints), such as 3.5, 9.5, 15.5, ..., not values like 1, 7, 13.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Record the given data carefully. The class intervals (number of balls faced) along with Team A and Team B runs are: 1–6 (2, 5), 7–12 (1, 6), 13–18 (8, 2), 19–24 (9, 10), 25–30 (4, 5), 31–36 (5, 6), 37–42 (6, 3), 43–48 (10, 4), 49–54 (6, 8), 55–60 (2, 10). — Reason: Organising the data first prevents errors in all later calculations.
  2. Step 2: Check whether the class intervals are continuous. The upper limit of the first class is 6 and the lower limit of the next class is 7, so the gap between them is \( 7 - 6 = 1 \). Since this gap is not zero, the intervals are discontinuous (inclusive type) and must be converted before we can draw a smooth polygon. — Reason: Frequency polygons require continuous (exclusive) class intervals so that there are no gaps between consecutive classes on the graph.
  3. Step 3: Convert the intervals to continuous form. Half the gap is \( \frac{1}{2} = 0.5 \). Subtract 0.5 from every lower limit and add 0.5 to every upper limit. The converted intervals become: 0.5–6.5, 6.5–12.5, 12.5–18.5, 18.5–24.5, 24.5–30.5, 30.5–36.5, 36.5–42.5, 42.5–48.5, 48.5–54.5, 54.5–60.5. — Reason: This adjustment eliminates the gaps between consecutive classes and makes all intervals share their boundaries.
  4. Step 4: Calculate the class mark for each continuous interval using the formula \( \text{Class mark} = \frac{\text{Lower limit} + \text{Upper limit}}{2} \). For the first interval: \[ \frac{0.5 + 6.5}{2} = \frac{7}{2} = 3.5 \] For the second: \[ \frac{6.5 + 12.5}{2} = \frac{19}{2} = 9.5 \] Continuing this way for all intervals gives class marks: 3.5, 9.5, 15.5, 21.5, 27.5, 33.5, 39.5, 45.5, 51.5, 57.5. — Reason: The class mark is the representative x-value for each interval and is the point we plot on the horizontal axis.
  5. Step 5: Pair each class mark with Team A's frequency to get the coordinates for Team A's polygon: \((3.5,\,2)\), \((9.5,\,1)\), \((15.5,\,8)\), \((21.5,\,9)\), \((27.5,\,4)\), \((33.5,\,5)\), \((39.5,\,6)\), \((45.5,\,10)\), \((51.5,\,6)\), \((57.5,\,2)\). — Reason: Each coordinate pair tells us exactly which point to mark on the graph for Team A.
  6. Step 6: Pair each class mark with Team B's frequency to get the coordinates for Team B's polygon: \((3.5,\,5)\), \((9.5,\,6)\), \((15.5,\,2)\), \((21.5,\,10)\), \((27.5,\,5)\), \((33.5,\,6)\), \((39.5,\,3)\), \((45.5,\,4)\), \((51.5,\,8)\), \((57.5,\,10)\). — Reason: Listing Team B's points separately keeps the two data sets distinct before they are drawn on the shared graph.
  7. Step 7: On graph paper, mark the class marks 3.5, 9.5, 15.5, … 57.5 on the x-axis and suitable frequency values on the y-axis. Plot all ten Team A coordinate pairs, join them in order with straight line segments to form Team A's frequency polygon. Then plot all ten Team B coordinate pairs on the same graph, join them with straight line segments using a different colour or style to form Team B's frequency polygon. — Reason: Placing both polygons on one graph makes it easy to compare how the run distributions of the two teams differ across all class intervals.

Final Answer

After converting to continuous classes, the class marks are 3.5, 9.5, 15.5, 21.5, 27.5, 33.5, 39.5, 45.5, 51.5, 57.5. Plot Team A points (3.5, 2), (9.5, 1), (15.5, 8), (21.5, 9), (27.5, 4), (33.5, 5), (39.5, 6), (45.5, 10), (51.5, 6), (57.5, 2) and Team B points (3.5, 5), (9.5, 6), (15.5, 2), (21.5, 10), (27.5, 5), (33.5, 6), (39.5, 3), (45.5, 4), (51.5, 8), (57.5, 10) on the same graph and join each set with straight lines. The two joined line graphs are the frequency polygons of Teams A and B.

Common Mistake

One common mistake: forgetting to convert the inclusive class intervals to continuous ones before computing class marks — using the original limits (e.g. 1 and 6 instead of 0.5 and 6.5) gives an incorrect class mark of 3.5 only by coincidence here, but will generally shift the plotted points and make the polygon inaccurate, especially when the gap between classes is not exactly 1.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Gap between classes: \( 7 - 6 = 1 \), so adjustment \( = 0.5 \). Continuous classes: 0.5–6.5, 6.5–12.5, 12.5–18.5, 18.5–24.5, 24.5–30.5, 30.5–36.5, 36.5–42.5, 42.5–48.5, 48.5–54.5, 54.5–60.5.
  2. Step 2: Class marks: \( \frac{0.5+6.5}{2}=3.5,\ \frac{6.5+12.5}{2}=9.5,\ \frac{12.5+18.5}{2}=15.5,\ \frac{18.5+24.5}{2}=21.5,\ \frac{24.5+30.5}{2}=27.5,\ \frac{30.5+36.5}{2}=33.5,\ \frac{36.5+42.5}{2}=39.5,\ \frac{42.5+48.5}{2}=45.5,\ \frac{48.5+54.5}{2}=51.5,\ \frac{54.5+60.5}{2}=57.5 \).
  3. Step 3: Team A points: \( (3.5,2),\ (9.5,1),\ (15.5,8),\ (21.5,9),\ (27.5,4),\ (33.5,5),\ (39.5,6),\ (45.5,10),\ (51.5,6),\ (57.5,2) \). Team B points: \( (3.5,5),\ (9.5,6),\ (15.5,2),\ (21.5,10),\ (27.5,5),\ (33.5,6),\ (39.5,3),\ (45.5,4),\ (51.5,8),\ (57.5,10) \). Plot both sets and join each with straight line segments.

Answer: After converting to continuous classes, the class marks are 3.5, 9.5, 15.5, 21.5, 27.5, 33.5, 39.5, 45.5, 51.5, 57.5. Plot Team A points (3.5, 2), (9.5, 1), (15.5, 8), (21.5, 9), (27.5, 4), (33.5, 5), (39.5, 6), (45.5, 10), (51.5, 6), (57.5, 2) and Team B points (3.5, 5), (9.5, 6), (15.5, 2), (21.5, 10), (27.5, 5), (33.5, 6), (39.5, 3), (45.5, 4), (51.5, 8), (57.5, 10) on the same graph and join each set with straight lines. The two joined line graphs are the frequency polygons of Teams A and B.

➕ More Examples

More Examples

Example 1

Question: The number of words typed per minute by two typists P and Q during a typing test (over 50 attempts each) are recorded below. Represent the data of both typists on the same graph using frequency polygons. (Hint: First make the class intervals continuous.) Typist P: Words per minute: 10–14, 15–19, 20–24, 25–29, 30–34 Number of attempts: 4, 10, 18, 12, 6 Typist Q: Words per minute: 10–14, 15–19, 20–24, 25–29, 30–34 Number of attempts: 6, 14, 16, 10, 4

Solution: Step 1: Make the class intervals continuous. The given classes are discontinuous (e.g., 10–14 and 15–19 have a gap of 1). The adjustment factor is \( \dfrac{15 - 14}{2} = 0.5 \). Subtract 0.5 from each lower limit and add 0.5 to each upper limit. Continuous class intervals: 9.5–14.5, 14.5–19.5, 19.5–24.5, 24.5–29.5, 29.5–34.5 Step 2: Find the class marks. Class mark = \( \dfrac{\text{Lower boundary} + \text{Upper boundary}}{2} \) For 9.5–14.5: \[ \text{Class mark} = \frac{9.5 + 14.5}{2} = \frac{24}{2} = 12 \] For 14.5–19.5: \[ \text{Class mark} = \frac{14.5 + 19.5}{2} = \frac{34}{2} = 17 \] For 19.5–24.5: \[ \text{Class mark} = \frac{19.5 + 24.5}{2} = \frac{44}{2} = 22 \] For 24.5–29.5: \[ \text{Class mark} = \frac{24.5 + 29.5}{2} = \frac{54}{2} = 27 \] For 29.5–34.5: \[ \text{Class mark} = \frac{29.5 + 34.5}{2} = \frac{64}{2} = 32 \] Step 3: Prepare the table for the frequency polygon. Class mark | Frequency (P) | Frequency (Q) 12 | 4 | 6 17 | 10 | 14 22 | 18 | 16 27 | 12 | 10 32 | 6 | 4 Step 4: Add imaginary classes at both ends with zero frequency to close the polygon. Add class mark \( 7 \) (one interval before 9.5–14.5) and class mark \( 37 \) (one interval after 29.5–34.5), each with frequency 0 for both typists. Step 5: Plot the points and join them. For Typist P, plot the points: \( (7, 0) \), \( (12, 4) \), \( (17, 10) \), \( (22, 18) \), \( (27, 12) \), \( (32, 6) \), \( (37, 0) \). Join with straight lines. For Typist Q, plot the points: \( (7, 0) \), \( (12, 6) \), \( (17, 14) \), \( (22, 16) \), \( (27, 10) \), \( (32, 4) \), \( (37, 0) \). Join with straight lines using a different colour or line style. Both polygons share the same horizontal axis (class marks: words per minute) and the same vertical axis (frequency: number of attempts). Label each polygon clearly as P and Q.

Answer: The continuous class intervals are 9.5–14.5, 14.5–19.5, 19.5–24.5, 24.5–29.5, 29.5–34.5 with class marks 12, 17, 22, 27, 32. For Typist P the frequencies are 4, 10, 18, 12, 6 and for Typist Q they are 6, 14, 16, 10, 4. The two frequency polygons are drawn on the same axes by plotting (class mark, frequency) points for each typist and joining them with straight lines.

Example 2

Question: The marks obtained by students of two sections, Section A and Section B, in a class test (out of 50) are given below. Draw frequency polygons for both sections on the same graph. (Hint: Make the class intervals continuous first.) Section A: Marks: 1–10, 11–20, 21–30, 31–40, 41–50 Number of students: 3, 7, 15, 10, 5 Section B: Marks: 1–10, 11–20, 21–30, 31–40, 41–50 Number of students: 5, 12, 14, 8, 1

Solution: Step 1: Make the class intervals continuous. The gap between consecutive classes (e.g., 10 and 11) is 1. The adjustment factor is \( \dfrac{11 - 10}{2} = 0.5 \). Subtract 0.5 from each lower limit and add 0.5 to each upper limit. Continuous class intervals: 0.5–10.5, 10.5–20.5, 20.5–30.5, 30.5–40.5, 40.5–50.5 Step 2: Find the class marks. For 0.5–10.5: \[ \text{Class mark} = \frac{0.5 + 10.5}{2} = \frac{11}{2} = 5.5 \] For 10.5–20.5: \[ \text{Class mark} = \frac{10.5 + 20.5}{2} = \frac{31}{2} = 15.5 \] For 20.5–30.5: \[ \text{Class mark} = \frac{20.5 + 30.5}{2} = \frac{51}{2} = 25.5 \] For 30.5–40.5: \[ \text{Class mark} = \frac{30.5 + 40.5}{2} = \frac{71}{2} = 35.5 \] For 40.5–50.5: \[ \text{Class mark} = \frac{40.5 + 50.5}{2} = \frac{91}{2} = 45.5 \] Step 3: Prepare the table. Class mark | Frequency (A) | Frequency (B) 5.5 | 3 | 5 15.5 | 7 | 12 25.5 | 15 | 14 35.5 | 10 | 8 45.5 | 5 | 1 Step 4: Add imaginary classes at both ends with zero frequency. Add class mark \( -4.5 \) (one interval of width 10 before 0.5–10.5) and class mark \( 55.5 \) (one interval after 40.5–50.5), each with frequency 0 for both sections. Step 5: Plot the points and join them. For Section A, plot the points: \( (-4.5,\, 0) \), \( (5.5,\, 3) \), \( (15.5,\, 7) \), \( (25.5,\, 15) \), \( (35.5,\, 10) \), \( (45.5,\, 5) \), \( (55.5,\, 0) \). Join with straight lines. For Section B, plot the points: \( (-4.5,\, 0) \), \( (5.5,\, 5) \), \( (15.5,\, 12) \), \( (25.5,\, 14) \), \( (35.5,\, 8) \), \( (45.5,\, 1) \), \( (55.5,\, 0) \). Join with straight lines using a different colour or line style. The horizontal axis represents class marks (marks out of 50) and the vertical axis represents the number of students. Label each polygon clearly as Section A and Section B.

Answer: The continuous class intervals are 0.5–10.5, 10.5–20.5, 20.5–30.5, 30.5–40.5, 40.5–50.5 with class marks 5.5, 15.5, 25.5, 35.5, 45.5. For Section A the frequencies are 3, 7, 15, 10, 5 and for Section B they are 5, 12, 14, 8, 1. The two frequency polygons are drawn on the same graph by plotting (class mark, frequency) for each section and joining consecutive points with straight lines, anchored to zero at imaginary classes on both ends.

🎯 Try a Similar Question

Try a Similar Question

Question: The number of goals scored by two football clubs P and Q in their first 50 matches of a season are given below. Represent the data of both clubs on the same graph by frequency polygons. (Hint: First make the class intervals continuous.) Goals Scored | Club P (No. of Matches) | Club Q (No. of Matches) 1–5 | 4 | 7 6–10 | 8 | 5 11–15 | 12 | 9 16–20 | 9 | 13 21–25 | 7 | 6 26–30 | 5 | 4 31–35 | 3 | 4 36–40 | 2 | 2

Solution

  1. Step 1: Convert discontinuous class intervals to continuous class intervals: The given class intervals are discontinuous (e.g. 1–5, 6–10). To make them continuous, find the gap between consecutive intervals. The gap between 5 and 6 is 1, so subtract \( \frac{1}{2} = 0.5 \) from each lower boundary and add 0.5 to each upper boundary. The continuous class intervals become: 0.5–5.5, 5.5–10.5, 10.5–15.5, 15.5–20.5, 20.5–25.5, 25.5–30.5, 30.5–35.5, 35.5–40.5
  2. Step 2: Find the class marks for each continuous interval: The class mark is the midpoint of each continuous interval. Using the formula: Class mark \( = \frac{\text{Lower boundary} + \text{Upper boundary}}{2} \) For 0.5–5.5: \( \frac{0.5 + 5.5}{2} = 3 \) For 5.5–10.5: \( \frac{5.5 + 10.5}{2} = 8 \) For 10.5–15.5: \( \frac{10.5 + 15.5}{2} = 13 \) For 15.5–20.5: \( \frac{15.5 + 20.5}{2} = 18 \) For 20.5–25.5: \( \frac{20.5 + 25.5}{2} = 23 \) For 25.5–30.5: \( \frac{25.5 + 30.5}{2} = 28 \) For 30.5–35.5: \( \frac{30.5 + 35.5}{2} = 33 \) For 35.5–40.5: \( \frac{35.5 + 40.5}{2} = 38 \) So the class marks are: 3, 8, 13, 18, 23, 28, 33, 38.
  3. Step 3: List the points to be plotted for Club P: Each point is of the form (class mark, frequency). The points for Club P are: \( (3,\ 4),\ (8,\ 8),\ (13,\ 12),\ (18,\ 9),\ (23,\ 7),\ (28,\ 5),\ (33,\ 3),\ (38,\ 2) \)
  4. Step 4: List the points to be plotted for Club Q: The points for Club Q are: \( (3,\ 7),\ (8,\ 5),\ (13,\ 9),\ (18,\ 13),\ (23,\ 6),\ (28,\ 4),\ (33,\ 4),\ (38,\ 2) \)
  5. Step 5: Draw the frequency polygons: On a graph paper, take the class marks (3, 8, 13, 18, 23, 28, 33, 38) along the x-axis and the number of matches (frequency) along the y-axis. Plot all the points for Club P and join them in order with straight line segments to form the frequency polygon for Club P. Similarly, plot all the points for Club Q and join them with straight line segments to form the frequency polygon for Club Q. Both polygons are drawn on the same graph using different colours or line styles for clear comparison. Note: To complete the polygon properly, you may extend the line to the midpoints of the imaginary class intervals just before the first and just after the last interval, i.e. to the points \( (-2,\ 0) \) and \( (43,\ 0) \) on the x-axis for each club.

Answer: After converting to continuous classes, the class marks are 3, 8, 13, 18, 23, 28, 33, 38. Plot Club P points \( (3, 4),\ (8, 8),\ (13, 12),\ (18, 9),\ (23, 7),\ (28, 5),\ (33, 3),\ (38, 2) \) and Club Q points \( (3, 7),\ (8, 5),\ (13, 9),\ (18, 13),\ (23, 6),\ (28, 4),\ (33, 4),\ (38, 2) \) on the same graph and join each set with straight lines. The two resulting line graphs are the frequency polygons of Clubs P and Q.

Everything you get with Solver7

More questions in Statistics