SOLVER7 Study. Nothing Else.
Exercise 12.1 Q4(ii)

The length of \(40\) leaves of a plant are measured correct to one millimetre, and the obtained data is represented in the following table: Is there any other suitable graphical representation for the same data\(?\)

CBSE Class 9 Maths · Statistics

Solution

👶 Simple Explanation

Simple Explanation

Imagine drawing a bar chart to show how many leaves have different lengths — that bar chart is called a histogram. But there is another way to show the same information! Think of it like connecting dots on a map. You find the middle point of each bar, mark it with a dot, and join all the dots with straight lines. That line drawing is called a frequency polygon. Both pictures tell the same story about the data, just in different ways. So yes, the same leaf data can be shown as a frequency polygon too!

Answer: Yes. Besides a histogram, the same data can be represented by a frequency polygon, drawn by joining the class marks (midpoints) plotted against their frequencies with line segments.

📖 Suitable Graphical Representation of Grouped Data

Detailed Explanation

The given data is a grouped frequency distribution with continuous class intervals like 118-126, 127-135, and so on, and their corresponding frequencies (number of leaves). Such data is usually shown by a histogram, where each bar's height equals the frequency and the width equals the class size. But a histogram is not the only choice. For grouped continuous data, another very useful graph is the frequency polygon. A frequency polygon is a line graph formed by joining the midpoints (class marks) of the tops of the histogram bars, and it can even be drawn directly without first drawing the histogram. So yes, the same data can also be represented by a frequency polygon.

Formula Used

Class mark \( = \frac{\text{lower limit} + \text{upper limit}}{2} \)

Solution

  1. Step 1: Note the nature of the data. The classes 118-126, 127-135, 136-144, 145-153, 154-162, 163-171, 172-180 are class intervals, and 3, 5, 9, 12, 5, 4, 2 are their frequencies. This is grouped continuous frequency data, so it is well suited to a histogram.
  2. Step 2: Recall that a histogram is not the only graph for such data. For grouped continuous data, a frequency polygon is another correct and suitable graphical representation.
  3. Step 3: Understand how a frequency polygon works. We find the class mark of each class interval using \[ \text{Class mark} = \frac{\text{lower limit} + \text{upper limit}}{2} \] For example, for the class 118-126, the class mark is \( \frac{118 + 126}{2} = 122 \).
  4. Step 4: Plot each class mark against its frequency. That is, plot points such as (122, 3), (131, 5), (140, 9), (149, 12), (158, 5), (167, 4), (176, 2). Joining these points by straight line segments gives the frequency polygon.
  5. Step 5: To make it a proper (closed) polygon, we also join it to the mid-points of the imaginary class just before the first class and just after the last class, both having frequency 0. This is why the frequency polygon is a suitable alternative graph for the same data.

Final Answer

Yes. Besides a histogram, the same data can be represented by a frequency polygon, drawn by joining the class marks (midpoints) plotted against their frequencies with line segments.

Common Mistake

A common mistake is plotting the frequency polygon points at the class limits (like 118 or 126) instead of at the class marks (like 122). The frequency polygon must always use the class marks on the horizontal axis.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Examine the nature of the given data. The class intervals are 118–126, 127–135, 136–144, 145–153, 154–162, 163–171, and 172–180, with corresponding frequencies 3, 5, 9, 12, 5, 4, and 2. — Reason: Identifying the data type (grouped continuous) tells us which graphical representations are valid.
  2. Step 2: Confirm that a histogram is a suitable representation. Each bar of the histogram has a width equal to the class size and a height equal to the frequency of that class. — Reason: A histogram is the standard graph for grouped continuous frequency data, so it is always the first option to confirm.
  3. Step 3: Recall that grouped continuous data also allows a second graphical form: the frequency polygon. A frequency polygon is a line graph and does not require the histogram to be drawn first; it can be constructed independently. — Reason: Understanding alternative representations broadens the student's toolkit for displaying the same data in different ways.
  4. Step 4: Find the class mark for each interval using the formula: \[ \text{Class mark} = \frac{\text{lower limit} + \text{upper limit}}{2} \] For example, the class mark of 118–126 is calculated as \[ \frac{118 + 126}{2} = \frac{244}{2} = 122 \] Similarly, the class marks for the remaining intervals are 131, 140, 149, 158, 167, and 176. — Reason: The class mark is the representative value (midpoint) of each interval and serves as the x-coordinate when plotting the frequency polygon.
  5. Step 5: Plot each class mark on the horizontal axis and the corresponding frequency on the vertical axis, then join all the plotted points with straight line segments. To close the polygon, the line is extended to the class marks of the imaginary classes just before and just after the data range, where the frequency is taken as 0. — Reason: Joining the midpoints with line segments creates the frequency polygon; extending to zero-frequency points closes the figure properly.
  6. Step 6: Conclude that the answer is yes — the same grouped frequency data can be represented by a frequency polygon in addition to a histogram. Both graphs use the same frequency values; the difference is that the histogram uses bars while the frequency polygon uses connected line segments at the class marks. — Reason: This directly answers the question and reinforces that multiple graphical forms can represent identical data.

Final Answer

Yes. Besides a histogram, the same data can be represented by a frequency polygon, drawn by joining the class marks (midpoints) plotted against their frequencies with line segments.

Common Mistake

One common mistake: Students often think the frequency polygon must always be drawn on top of a histogram. In reality, once the class marks and frequencies are known, the frequency polygon can be drawn directly as a standalone line graph without constructing the histogram at all.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Data type: grouped continuous frequency distribution — representable by a histogram (bar height = frequency, bar width = class size).
  2. Step 2: Class mark for each interval: \[ \text{Class mark} = \frac{\text{lower limit} + \text{upper limit}}{2} \] For example, class 118–126 gives class mark \( \frac{118 + 126}{2} = 122 \).
  3. Step 3: Plot (class mark, frequency) for each class and join the points with line segments — this gives the frequency polygon, an alternative representation of the same data.

Answer: Yes. Besides a histogram, the same data can be represented by a frequency polygon, drawn by joining the class marks (midpoints) plotted against their frequencies with line segments.

➕ More Examples

More Examples

Example 1

Question: The ages (in years) of 50 students of a coaching centre were recorded and grouped as shown below. Draw a frequency distribution table and state which graphical representations are suitable for this data. Age (in years): 10–12, 12–14, 14–16, 16–18, 18–20 Number of students: 6, 11, 18, 10, 5 Also find the class marks of each class interval.

Solution: Step 1: Identify the type of data. The data is continuous grouped data with equal class widths of 2 years each, so a histogram and a frequency polygon are both suitable graphical representations. Step 2: Complete the frequency distribution table with class marks. For class 10–12: Class mark = \( \frac{10 + 12}{2} = \frac{22}{2} = 11 \) For class 12–14: Class mark = \( \frac{12 + 14}{2} = \frac{26}{2} = 13 \) For class 14–16: Class mark = \( \frac{14 + 16}{2} = \frac{30}{2} = 15 \) For class 16–18: Class mark = \( \frac{16 + 18}{2} = \frac{34}{2} = 17 \) For class 18–20: Class mark = \( \frac{18 + 20}{2} = \frac{38}{2} = 19 \) Step 3: Verify total frequency. Total = \( 6 + 11 + 18 + 10 + 5 = 50 \), which matches the given number of students. Step 4: State suitable graphical representations. Since the data is continuous and grouped: (a) A histogram can be drawn, with class intervals on the x-axis and number of students (frequency) on the y-axis. Each bar's height equals the frequency of that class. (b) A frequency polygon can be drawn by joining the midpoints (class marks) of the tops of each bar. It can also be drawn directly by plotting class marks against frequencies. Both representations are equally suitable for this type of grouped continuous data.

Answer: Class marks are 11, 13, 15, 17, and 19 for the respective intervals. Both a histogram and a frequency polygon are suitable graphical representations for this data.

Example 2

Question: The weekly pocket money (in rupees) of 30 school children is recorded and arranged in the following grouped frequency table: Pocket Money (in Rs): 50–100, 100–150, 150–200, 200–250, 250–300 Number of children: 4, 8, 10, 6, 2 (i) Find the class mark of each class interval. (ii) Name two graphical representations suitable for this data and briefly explain which one shows the shape of distribution more clearly.

Solution: Step 1: Find the class marks. For class 50–100: Class mark = \( \frac{50 + 100}{2} = \frac{150}{2} = 75 \) For class 100–150: Class mark = \( \frac{100 + 150}{2} = \frac{250}{2} = 125 \) For class 150–200: Class mark = \( \frac{150 + 200}{2} = \frac{350}{2} = 175 \) For class 200–250: Class mark = \( \frac{200 + 250}{2} = \frac{450}{2} = 225 \) For class 250–300: Class mark = \( \frac{250 + 300}{2} = \frac{550}{2} = 275 \) Step 2: Verify total frequency. Total = \( 4 + 8 + 10 + 6 + 2 = 30 \), which matches the given number of children. Step 3: Identify suitable graphical representations. (a) Histogram: On the x-axis, the pocket money ranges are marked as class intervals, and on the y-axis, the number of children (frequency) is marked. A rectangle is drawn for each class interval with height equal to its frequency. The bars are adjacent (no gaps) since data is continuous. (b) Frequency Polygon: The class marks 75, 125, 175, 225, 275 are plotted against their respective frequencies 4, 8, 10, 6, 2 and the points are joined by straight line segments. Two additional points at the class marks of the imaginary classes just below 50–100 and just above 250–300 are taken with zero frequency to close the polygon. Step 4: Comparison. A frequency polygon is more effective at showing the overall shape and trend of the distribution, as the connected line makes it easier to compare distributions. A histogram clearly shows the frequency of each class interval through the area of the bars. Both are correct and acceptable representations.

Answer: (i) Class marks are 75, 125, 175, 225, and 275 for the respective intervals. (ii) Both a histogram and a frequency polygon are suitable; a frequency polygon shows the shape of the distribution more clearly, while a histogram better displays the frequency of each individual class.

🎯 Try a Similar Question

Try a Similar Question

Question: The ages (in years) of 50 students enrolled in a coaching centre are recorded and presented in the following grouped frequency table: Age (in years): 10–12, 12–14, 14–16, 16–18, 18–20 Number of students: 6, 11, 18, 10, 5 A histogram is drawn for the above data. Is there any other suitable graphical representation for the same data? If yes, name it and describe how it is constructed.

Solution

  1. Step 1: Identify the type of data: The given data is a grouped frequency distribution with continuous class intervals. The class intervals are 10–12, 12–14, 14–16, 16–18, and 18–20, each of width 2 years, with corresponding frequencies 6, 11, 18, 10, and 5.
  2. Step 2: Recall suitable graphical representations: For grouped continuous data, two standard graphical representations are used in Class 9 Statistics: (i) Histogram — bars are drawn over each class interval with heights equal to the frequency. (ii) Frequency Polygon — a line graph drawn by joining the class marks (midpoints) of each interval against their frequencies.
  3. Step 3: Find the class marks: The class mark of each interval is calculated as the average of its lower and upper limits. For 10–12: class mark = \( \frac{10 + 12}{2} = 11 \) For 12–14: class mark = \( \frac{12 + 14}{2} = 13 \) For 14–16: class mark = \( \frac{14 + 16}{2} = 15 \) For 16–18: class mark = \( \frac{16 + 18}{2} = 17 \) For 18–20: class mark = \( \frac{18 + 20}{2} = 19 \)
  4. Step 4: Describe how the frequency polygon is constructed: Plot points with class marks on the x-axis and their corresponding frequencies on the y-axis: (11, 6), (13, 11), (15, 18), (17, 10), (19, 5). To close the polygon, two imaginary classes with zero frequency are added — one before the first class (class mark 9, frequency 0) and one after the last class (class mark 21, frequency 0). All these points are then joined by straight line segments to form the frequency polygon.
  5. Step 5: State the conclusion: Yes, besides a histogram, the same data can also be represented by a frequency polygon. It is constructed by plotting the class marks against their respective frequencies and joining the plotted points with line segments, with the polygon closed at both ends by meeting the x-axis at the midpoints of the imaginary classes on either side.

Answer: Yes. Besides a histogram, the same data can be represented by a frequency polygon. It is drawn by plotting the class marks (midpoints of each class interval) against their corresponding frequencies — giving points (11, 6), (13, 11), (15, 18), (17, 10), and (19, 5) — and joining them with straight line segments. The polygon is closed on both ends by extending to imaginary class marks (9 and 21) with zero frequency on the x-axis.

Everything you get with Solver7

More questions in Statistics