SOLVER7 Study. Nothing Else.
Exercise 12.1 Q1(i)

A survey conducted by an organisation for the cause of illness and death among the women between the ages \(15-44\) (in years) worldwide, found the following figures (in \(\%\)): Represent the information given above graphically.

CBSE Class 9 Maths · Statistics

Solution

👶 Simple Explanation

Simple Explanation

Imagine you have six jars, each holding a different amount of water. A bar graph is like drawing tall rectangles, where taller rectangles mean more water. Here, each rectangle stands for one cause of illness in females. The taller the rectangle, the more females are affected by that cause. Reproductive health conditions has the tallest bar, so it harms the most females. Reading bar graphs is just like comparing the heights of friends standing side by side — taller means more.

Answer: The data is best represented by a bar graph with the six causes on the horizontal axis and the female fatality rate (in percent) on the vertical axis, using equal bar widths and equal gaps. With the scale \( 1 \) unit \( = 2\% \), the bar heights are \( 15.9,\ 12.7,\ 6.2,\ 2.15,\ 2.05 \) and \( 11 \) units for Reproductive health, Neuropsychiatric, Injuries, Cardiovascular, Respiratory and Other causes respectively. The tallest bar (Reproductive health conditions, \( 31.8\% \)) is the leading cause.

📖 Representing Survey Data as a Bar Graph

Detailed Explanation

The data given is qualitative, meaning each category (a cause of illness) is different and has no natural numerical order between them. For such data, the best graphical representation is a bar graph. In a bar graph, we draw rectangular bars of equal width, keep equal gaps between the bars, and make the height of each bar proportional to the value it represents (here the fatality rate in percent). The horizontal axis shows the causes and the vertical axis shows the female fatality rate. A bar graph lets us quickly compare the different causes visually.

Formula Used

Height of a bar is proportional to its value. Using a scale, for example 1 unit on the vertical axis \( = 2\% \). So height of a bar \( = \dfrac{\text{value in }\%}{2} \) units.

Solution

  1. Step 1: List the given information clearly. The causes are the categories and the female fatality rate (in percent) is the value for each. Reproductive health conditions is \( 31.8 \), Neuropsychiatric conditions is \( 25.4 \), Injuries is \( 12.4 \), Cardiovascular conditions is \( 4.3 \), Respiratory conditions is \( 4.1 \) and Other causes is \( 22.0 \).
  2. Step 2: Decide the axes. Draw two perpendicular lines. On the horizontal axis (x-axis) mark the six causes of illness. On the vertical axis (y-axis) mark the female fatality rate in percent. Since the values are the frequencies here, they go on the vertical axis.
  3. Step 3: Choose a suitable scale for the vertical axis. Since the largest value is \( 31.8 \) and the smallest is \( 4.1 \), take \( 1 \) unit \( = 2\% \). Then the axis should go from \( 0 \) up to at least \( 32 \), so mark it as \( 0, 2, 4, 6, \dots, 32 \). A clear scale makes the bars easy to read.
  4. Step 4: Draw the bars. Keep all bars of the same width and leave equal gaps between them. The equal width and equal gaps are important so that no cause looks bigger just because of its size. Using the scale, the bar heights are: Reproductive health conditions \( \dfrac{31.8}{2} = 15.9 \) units, Neuropsychiatric conditions \( \dfrac{25.4}{2} = 12.7 \) units, Injuries \( \dfrac{12.4}{2} = 6.2 \) units, Cardiovascular conditions \( \dfrac{4.3}{2} = 2.15 \) units, Respiratory conditions \( \dfrac{4.1}{2} = 2.05 \) units, Other causes \( \dfrac{22.0}{2} = 11 \) units.
  5. Step 5: Label everything. Write the causes below each bar on the horizontal axis and write the fatality rate values on the vertical axis. Give the graph a title such as Female fatality rate for different causes. Labels and a title are needed for the graph to be complete and understandable.
  6. Step 6: Interpret the graph. The tallest bar is for Reproductive health conditions at \( 31.8\% \), which is the leading cause, and the shortest bar is for Respiratory conditions at \( 4.1\% \). This shows the main advantage of a bar graph: comparing the categories becomes very easy at a glance.

Final Answer

The data is best represented by a bar graph with the six causes on the horizontal axis and the female fatality rate (in percent) on the vertical axis, using equal bar widths and equal gaps. With the scale \( 1 \) unit \( = 2\% \), the bar heights are \( 15.9,\ 12.7,\ 6.2,\ 2.15,\ 2.05 \) and \( 11 \) units for Reproductive health, Neuropsychiatric, Injuries, Cardiovascular, Respiratory and Other causes respectively. The tallest bar (Reproductive health conditions, \( 31.8\% \)) is the leading cause.

Common Mistake

A common mistake is drawing a histogram (with bars touching each other) instead of a bar graph. Since the causes are separate categories and not continuous class intervals, the bars must have equal gaps between them and must not touch.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Identify the type of data given. The six causes of illness (Reproductive health conditions, Neuropsychiatric conditions, Injuries, Cardiovascular conditions, Respiratory conditions, Other causes) are qualitative categories with no natural numerical ordering between them. — Reason: Recognising that the categories are distinct and non-numerical tells us immediately that a bar graph (not a histogram or pie chart) is the correct representation, since bar graphs are designed for such categorical data.
  2. Step 2: List all the given data clearly in a table format. The female fatality rates are: Reproductive health conditions \( = 31.8\% \), Neuropsychiatric conditions \( = 25.4\% \), Injuries \( = 12.4\% \), Cardiovascular conditions \( = 4.3\% \), Respiratory conditions \( = 4.1\% \), and Other causes \( = 22.0\% \). — Reason: Organising the data before drawing makes it easier to choose the scale and avoid errors while plotting.
  3. Step 3: Set up the axes. Draw two perpendicular axes. Place the six causes of illness along the horizontal axis (x-axis) with equal spacing between bars. Place the female fatality rate (in percent) along the vertical axis (y-axis). — Reason: In a bar graph for categorical data, the categories go on the x-axis and the measured values (here, percentages) go on the y-axis so that bar heights can be directly compared.
  4. Step 4: Choose a suitable scale for the vertical axis. The largest value is \( 31.8\% \). Choosing the scale \( 1 \) unit \( = 2\% \) means the maximum height needed is \( \dfrac{31.8}{2} = 15.9 \) units, which is manageable on graph paper. — Reason: A scale must be chosen so that all bars fit neatly on the graph and can be read accurately; \( 1 \) unit \( = 2\% \) achieves this for all six values.
  5. Step 5: Calculate the bar height for each category using the formula height \( = \dfrac{\text{value}}{2} \) units. Reproductive health: \( \dfrac{31.8}{2} = 15.9 \) units. Neuropsychiatric: \( \dfrac{25.4}{2} = 12.7 \) units. Injuries: \( \dfrac{12.4}{2} = 6.2 \) units. Cardiovascular: \( \dfrac{4.3}{2} = 2.15 \) units. Respiratory: \( \dfrac{4.1}{2} = 2.05 \) units. Other causes: \( \dfrac{22.0}{2} = 11 \) units. — Reason: Converting each percentage to a bar height in units ensures that all bars are drawn to the same consistent scale.
  6. Step 6: Draw the bars on the graph. For each cause on the x-axis, draw a rectangular bar of the calculated height, keeping the width of every bar equal and leaving equal gaps between consecutive bars. — Reason: Equal widths and equal gaps are essential features of a bar graph; they prevent visual distortion and ensure that only the height (not the area or spacing) conveys the data value.
  7. Step 7: Interpret the completed bar graph. The tallest bar corresponds to Reproductive health conditions with a height of \( 15.9 \) units, representing \( 31.8\% \). This is clearly the highest among all six causes. — Reason: The purpose of constructing the bar graph is to make comparison easy at a glance; identifying the tallest bar immediately reveals the leading cause of female fatality.

Final Answer

The data is best represented by a bar graph with the six causes on the horizontal axis and the female fatality rate (in percent) on the vertical axis, using equal bar widths and equal gaps. With the scale \( 1 \) unit \( = 2\% \), the bar heights are \( 15.9,\ 12.7,\ 6.2,\ 2.15,\ 2.05 \) and \( 11 \) units for Reproductive health, Neuropsychiatric, Injuries, Cardiovascular, Respiratory and Other causes respectively. The tallest bar (Reproductive health conditions, \( 31.8\% \)) is the leading cause.

Common Mistake

One common mistake: Students sometimes use a histogram instead of a bar graph for this type of data. A histogram is only for continuous numerical data grouped into class intervals; since the causes of illness are distinct categories with no numerical order, a bar graph (with gaps between bars) must be used, not a histogram.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Identify graph type and axes: Data is qualitative (categories with no numerical order) — use a bar graph. Horizontal axis: six causes. Vertical axis: female fatality rate (%).
  2. Step 2: Record the given values: Reproductive health \( = 31.8\\% \), Neuropsychiatric \( = 25.4\\% \), Injuries \( = 12.4\\% \), Cardiovascular \( = 4.3\\% \), Respiratory \( = 4.1\\% \), Other \( = 22.0\\% \).
  3. Step 3: Compute bar heights using scale \( 1 \text{ unit} = 2\\% \): \[ \frac{31.8}{2} = 15.9, \quad \frac{25.4}{2} = 12.7, \quad \frac{12.4}{2} = 6.2, \quad \frac{4.3}{2} = 2.15, \quad \frac{4.1}{2} = 2.05, \quad \frac{22.0}{2} = 11 \]

Answer: The data is best represented by a bar graph with the six causes on the horizontal axis and the female fatality rate (in percent) on the vertical axis, using equal bar widths and equal gaps. With the scale \( 1 \) unit \( = 2\% \), the bar heights are \( 15.9,\ 12.7,\ 6.2,\ 2.15,\ 2.05 \) and \( 11 \) units for Reproductive health, Neuropsychiatric, Injuries, Cardiovascular, Respiratory and Other causes respectively. The tallest bar (Reproductive health conditions, \( 31.8\% \)) is the leading cause.

➕ More Examples

More Examples

Example 1

Question: A survey was conducted among 200 school students to find their favourite subject. The results are recorded in the table below. Represent this data using a bar graph. \nSubject: Mathematics, Science, English, Social Studies, Hindi\nNumber of Students: 60, 50, 35, 30, 25

Solution: We are given the following data: \nMathematics: 60 students\nScience: 50 students\nEnglish: 35 students\nSocial Studies: 30 students\nHindi: 25 students \nTotal number of students surveyed \[ = 60 + 50 + 35 + 30 + 25 = 200 \] \nSteps to draw the bar graph: 1. Draw the horizontal axis (x-axis) and label it 'Subject'. Draw the vertical axis (y-axis) and label it 'Number of Students'. 2. Choose a scale on the y-axis. Since the maximum value is 60, a scale of 1 unit = 10 students is appropriate, so the y-axis goes from 0 to 70. 3. Mark the five subjects at equal intervals along the x-axis: Mathematics, Science, English, Social Studies, and Hindi. 4. Draw vertical bars of equal width for each subject: - Mathematics: height = 60 units - Science: height = 50 units - English: height = 35 units - Social Studies: height = 30 units - Hindi: height = 25 units 5. Keep uniform gaps between consecutive bars. 6. Give the graph the title: 'Favourite Subject of School Students'. \nFrom the bar graph, it is clearly visible that Mathematics is the most preferred subject with 60 students, and Hindi is the least preferred subject with 25 students.

Answer: A bar graph is drawn with subjects on the x-axis and number of students on the y-axis (scale: 1 unit = 10 students). Bar heights are: Mathematics = 60, Science = 50, English = 35, Social Studies = 30, Hindi = 25. Mathematics is the most popular subject and Hindi is the least popular.

Example 2

Question: The following table shows the percentage of road accidents in a city caused by different factors during a particular year. Represent this data graphically using a bar graph. \nCause: Over Speeding, Drunk Driving, Poor Road Condition, Distracted Driving, Vehicle Failure\nPercentage of Accidents: 38, 22, 18, 14, 8

Solution: We are given the following data: \nOver Speeding: 38%\nDrunk Driving: 22%\nPoor Road Condition: 18%\nDistracted Driving: 14%\nVehicle Failure: 8% \nVerification — total of all percentages: \[ 38 + 22 + 18 + 14 + 8 = 100 \] The percentages add up to 100%, which is consistent. \nSteps to draw the bar graph: 1. Draw the horizontal axis (x-axis) and label it 'Cause of Accident'. Draw the vertical axis (y-axis) and label it 'Percentage of Accidents (%)'. 2. Choose a suitable scale on the y-axis. Since the maximum value is 38, a scale of 1 unit = 5% is appropriate, so the y-axis goes from 0 to 40. 3. Mark the five causes at equal intervals along the x-axis: Over Speeding, Drunk Driving, Poor Road Condition, Distracted Driving, and Vehicle Failure. 4. Draw vertical bars of equal width for each cause: - Over Speeding: height = 38 units - Drunk Driving: height = 22 units - Poor Road Condition: height = 18 units - Distracted Driving: height = 14 units - Vehicle Failure: height = 8 units 5. Keep uniform gaps between consecutive bars. 6. Give the graph the title: 'Causes of Road Accidents in the City'. \nFrom the bar graph, it is clearly visible that Over Speeding is the leading cause of road accidents at 38%, while Vehicle Failure contributes the least at 8%.

Answer: A bar graph is drawn with causes of accidents on the x-axis and percentage of accidents on the y-axis (scale: 1 unit = 5%). Bar heights are: Over Speeding = 38%, Drunk Driving = 22%, Poor Road Condition = 18%, Distracted Driving = 14%, Vehicle Failure = 8%. Over Speeding is the most common cause and Vehicle Failure is the least common.

🎯 Try a Similar Question

Try a Similar Question

Question: A survey on the major causes of road accidents in a city during a particular year recorded the following data: Cause of Accident | Percentage of Total Accidents Over-speeding | 42.5 Drunk driving | 18.0 Distracted driving | 15.5 Poor road condition | 10.0 Weather conditions | 8.0 Other causes | 6.0 Represent the information given above graphically using a bar graph.

Solution

  1. Step 1 — Read and organise the data: List the six causes and their corresponding percentages: Over-speeding: 42.5% Drunk driving: 18.0% Distracted driving: 15.5% Poor road condition: 10.0% Weather conditions: 8.0% Other causes: 6.0% Verify that the percentages are all positive and that the total is \( 42.5 + 18.0 + 15.5 + 10.0 + 8.0 + 6.0 = 100\% \), which confirms the data is consistent.
  2. Step 2 — Choose the type of graph: Since the data represents distinct, non-overlapping categories (causes of accidents), a bar graph is the most appropriate choice. Each cause gets one vertical bar, with equal widths and equal gaps between bars.
  3. Step 3 — Set up the axes: Draw the horizontal axis (x-axis) and label it 'Cause of Accident'. Mark the six categories along it: Over-speeding, Drunk driving, Distracted driving, Poor road condition, Weather conditions, Other causes. Draw the vertical axis (y-axis) and label it 'Percentage of Total Accidents (in %)'.
  4. Step 4 — Choose a suitable scale: The largest value is 42.5%. Choose a scale of 1 unit = 5% on the y-axis so that the tallest bar reaches \( \frac{42.5}{5} = 8.5 \) units, which fits neatly on graph paper. Mark the y-axis in multiples of 5 from 0 to 45.
  5. Step 5 — Calculate bar heights in scale units: Divide each percentage by 5 to get the bar height in units. Over-speeding: \( \frac{42.5}{5} = 8.5 \) units Drunk driving: \( \frac{18.0}{5} = 3.6 \) units Distracted driving: \( \frac{15.5}{5} = 3.1 \) units Poor road condition: \( \frac{10.0}{5} = 2.0 \) units Weather conditions: \( \frac{8.0}{5} = 1.6 \) units Other causes: \( \frac{6.0}{5} = 1.2 \) units
  6. Step 6 — Draw the bars: For each cause on the x-axis, draw a vertical bar of the corresponding height calculated in Step 5. Ensure all bars have equal width, equal spacing between them, and that each bar starts from the x-axis (zero baseline). Shade or colour the bars uniformly.
  7. Step 7 — Title and observation: Give the graph a title such as 'Causes of Road Accidents in a City'. Observe from the graph that the bar for Over-speeding (42.5%) is the tallest, making it the leading cause of road accidents, while Other causes (6.0%) has the shortest bar.

Answer: The data is best represented by a bar graph with the six causes of accidents on the horizontal axis and the percentage of total accidents on the vertical axis, using equal bar widths and equal gaps. With the scale 1 unit = 5%, the bar heights are 8.5, 3.6, 3.1, 2.0, 1.6, and 1.2 units for Over-speeding, Drunk driving, Distracted driving, Poor road condition, Weather conditions, and Other causes respectively. The tallest bar corresponds to Over-speeding at \( 42.5\% \), making it the leading cause of road accidents.

Everything you get with Solver7

More questions in Statistics