SOLVER7 Study. Nothing Else.
Chapter 12 Examples Q4

Consider the marks, out of \(100,\) obtained by \(51\) students of a class in a test, given in Table \(12.5.\) Draw a frequency polygon corresponding to this frequency distribution table.

CBSE Class 9 Maths · Statistics

Solution

👶 Simple Explanation

Simple Explanation

Imagine you have a scoreboard that shows how many students got marks in different ranges. A frequency polygon is like connecting the tops of those score bars with a line to make a shape. You find the middle value of each range — like the middle of 0 to 10 is 5 — and mark how many students scored there. You add two invisible zero-points at the start and end so the line touches the ground on both sides. Join all the dots and your frequency polygon is ready!

Answer: The frequency polygon is obtained by plotting the points \( (-5, 0) \), \( (5, 5) \), \( (15, 10) \), \( (25, 4) \), \( (35, 6) \), \( (45, 7) \), \( (55, 3) \), \( (65, 2) \), \( (75, 2) \), \( (85, 3) \), \( (95, 9) \) and \( (105, 0) \), with class marks on the x-axis and frequencies on the y-axis, and joining them by straight line segments. The graph begins and ends on the x-axis, forming the required frequency polygon.

📖 Frequency Polygon for Marks of 51 Students

Detailed Explanation

A frequency polygon is a graph that shows how frequencies are distributed over class intervals. It is made by plotting the class marks (mid-values of each class interval) on the horizontal axis against the corresponding frequencies on the vertical axis, and then joining these points with straight line segments. To make the polygon touch the horizontal axis at both ends, we add one imaginary class interval before the first class and one after the last class, each with frequency 0. The class mark is the midpoint of a class interval, found using the formula class mark equals half the sum of the lower and upper limits. In this problem the marks are grouped into classes 0-10, 10-20, and so on up to 90-100, and the corresponding number of students (frequencies) are 5, 10, 4, 6, 7, 3, 2, 2, 3, 9.

Formula Used

\[ \text{Class Mark} = \frac{\text{Lower limit} + \text{Upper limit}}{2} \]

Solution

  1. Step 1: Write down the frequency table clearly. The class intervals and their frequencies (number of students) are: 0-10 gives 5, 10-20 gives 10, 20-30 gives 4, 30-40 gives 6, 40-50 gives 7, 50-60 gives 3, 60-70 gives 2, 70-80 gives 2, 80-90 gives 3, 90-100 gives 9. The total is \( 5 + 10 + 4 + 6 + 7 + 3 + 2 + 2 + 3 + 9 = 51 \), which matches the number of students.
  2. Step 2: Find the class mark of each interval using \( \text{Class Mark} = \frac{\text{Lower limit} + \text{Upper limit}}{2} \). For 0-10 the class mark is \( \frac{0 + 10}{2} = 5 \). For 10-20 it is \( \frac{10 + 20}{2} = 15 \). Continuing this way we get the class marks 5, 15, 25, 35, 45, 55, 65, 75, 85, 95 for the ten intervals.
  3. Step 3: Add two extra imaginary classes, one before the first and one after the last, each with frequency 0. This makes the polygon start and end on the horizontal axis. The class before 0-10 is (-10)-0 with class mark \( -5 \) and frequency 0. The class after 90-100 is 100-110 with class mark \( 105 \) and frequency 0.
  4. Step 4: List all the points (class mark, frequency) to be plotted: \( (-5, 0) \), \( (5, 5) \), \( (15, 10) \), \( (25, 4) \), \( (35, 6) \), \( (45, 7) \), \( (55, 3) \), \( (65, 2) \), \( (75, 2) \), \( (85, 3) \), \( (95, 9) \) and \( (105, 0) \).
  5. Step 5: Draw two perpendicular axes. On the horizontal axis (x-axis) mark the class marks and label it 'Marks'. On the vertical axis (y-axis) mark the frequencies and label it 'Number of Students'. Choose a suitable scale, for example 1 cm equal to 10 units on the x-axis and 1 cm equal to 1 unit on the y-axis, so all points fit neatly.
  6. Step 6: Plot each point from Step 4 accurately on the graph. Then join consecutive points with straight line segments in order. The line starts from \( (-5, 0) \) on the axis, rises and falls through all the class-mark points, and comes back down to \( (105, 0) \) on the axis. This closed line graph is the required frequency polygon.

Final Answer

The frequency polygon is obtained by plotting the points \( (-5, 0) \), \( (5, 5) \), \( (15, 10) \), \( (25, 4) \), \( (35, 6) \), \( (45, 7) \), \( (55, 3) \), \( (65, 2) \), \( (75, 2) \), \( (85, 3) \), \( (95, 9) \) and \( (105, 0) \), with class marks on the x-axis and frequencies on the y-axis, and joining them by straight line segments. The graph begins and ends on the x-axis, forming the required frequency polygon.

Common Mistake

A very common mistake is plotting the frequencies against the upper (or lower) limits of the class intervals instead of against the class marks (midpoints). Another frequent error is forgetting to add the two imaginary classes with frequency 0 at both ends, which leaves the polygon 'open' instead of touching the x-axis at both sides.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Record the given frequency table: List all the class intervals and their frequencies (number of students) clearly. The data is: 0–10 has frequency 5, 10–20 has frequency 10, 20–30 has frequency 4, 30–40 has frequency 6, 40–50 has frequency 7, 50–60 has frequency 3, 60–70 has frequency 2, 70–80 has frequency 2, 80–90 has frequency 3, and 90–100 has frequency 9. Verify the total: \( 5 + 10 + 4 + 6 + 7 + 3 + 2 + 2 + 3 + 9 = 51 \) students. — Reason: Organising the data first ensures no class interval is missed before computing class marks.
  2. Step 2: Add imaginary classes at both ends: Introduce one imaginary class before the first interval and one after the last interval, each with frequency 0. The class before 0–10 is \( -10 \) to 0, and the class after 90–100 is 100–110, both carrying frequency 0. — Reason: A frequency polygon must start and end on the x-axis, so these dummy classes ensure the graph touches the horizontal axis at both ends, completing the polygon shape.
  3. Step 3: Calculate the class mark for each interval: Apply \( \text{Class Mark} = \frac{\text{Lower Limit} + \text{Upper Limit}}{2} \) to every interval including the imaginary ones. For \( -10 \) to 0: \( \frac{-10 + 0}{2} = -5 \). For 0–10: \( \frac{0 + 10}{2} = 5 \). For 10–20: \( \frac{10 + 20}{2} = 15 \). For 20–30: \( \frac{20 + 30}{2} = 25 \). For 30–40: \( \frac{30 + 40}{2} = 35 \). For 40–50: \( \frac{40 + 50}{2} = 45 \). For 50–60: \( \frac{50 + 60}{2} = 55 \). For 60–70: \( \frac{60 + 70}{2} = 65 \). For 70–80: \( \frac{70 + 80}{2} = 75 \). For 80–90: \( \frac{80 + 90}{2} = 85 \). For 90–100: \( \frac{90 + 100}{2} = 95 \). For 100–110: \( \frac{100 + 110}{2} = 105 \). — Reason: The class mark represents the entire class interval with a single x-coordinate, which is needed to plot each point on the graph.
  4. Step 4: Form the table of points to be plotted: Pair each class mark with its corresponding frequency to get the coordinates (class mark, frequency): \( (-5,\, 0) \), \( (5,\, 5) \), \( (15,\, 10) \), \( (25,\, 4) \), \( (35,\, 6) \), \( (45,\, 7) \), \( (55,\, 3) \), \( (65,\, 2) \), \( (75,\, 2) \), \( (85,\, 3) \), \( (95,\, 9) \), \( (105,\, 0) \). — Reason: Each ordered pair gives the exact location of a point on the graph; the x-coordinate is the class mark and the y-coordinate is the frequency.
  5. Step 5: Set up the axes and plot the points: Draw a horizontal x-axis labelled 'Class Marks' and a vertical y-axis labelled 'Frequency (Number of Students)'. Choose a suitable scale, for example, 1 cm = 10 units on the x-axis and 1 cm = 1 unit on the y-axis. Plot all twelve points listed in Step 4 carefully on the graph. — Reason: Correct axis labels and an appropriate scale make the graph readable and accurate.
  6. Step 6: Join the points and complete the polygon: Connect all twelve plotted points in order from left to right using straight line segments. The first point \( (-5,\, 0) \) and the last point \( (105,\, 0) \) both lie on the x-axis, so the figure is a closed polygon. — Reason: Straight line segments (not curves) are the defining feature of a frequency polygon; the closure on the x-axis at both ends gives it the 'polygon' shape rather than an open-ended line graph.

Final Answer

The frequency polygon is obtained by plotting the points \( (-5, 0) \), \( (5, 5) \), \( (15, 10) \), \( (25, 4) \), \( (35, 6) \), \( (45, 7) \), \( (55, 3) \), \( (65, 2) \), \( (75, 2) \), \( (85, 3) \), \( (95, 9) \) and \( (105, 0) \), with class marks on the x-axis and frequencies on the y-axis, and joining them by straight line segments. The graph begins and ends on the x-axis, forming the required frequency polygon.

Common Mistake

One common mistake: Students often forget to add the two imaginary classes (one before the first interval and one after the last interval with frequency 0), causing the frequency polygon to remain open at both ends instead of touching the x-axis and forming a proper closed polygon.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Compute Class Marks: Class marks for intervals 0–10, 10–20, …, 90–100 are \( 5, 15, 25, 35, 45, 55, 65, 75, 85, 95 \) respectively, with frequencies \( 5, 10, 4, 6, 7, 3, 2, 2, 3, 9 \).
  2. Step 2: Add Imaginary Classes: Prepend class \(-10\) to \(0\) (class mark \(-5\), frequency \(0\)) and append class \(100\) to \(110\) (class mark \(105\), frequency \(0\)).
  3. Step 3: List All Points to Plot: Points: \( (-5,\,0),\,(5,\,5),\,(15,\,10),\,(25,\,4),\,(35,\,6),\,(45,\,7),\,(55,\,3),\,(65,\,2),\,(75,\,2),\,(85,\,3),\,(95,\,9),\,(105,\,0) \).
  4. Step 4: Draw the Polygon: Plot the above points with class marks on the x-axis and frequencies on the y-axis, then join consecutive points with straight line segments.

Answer: The frequency polygon is obtained by plotting the points \( (-5, 0) \), \( (5, 5) \), \( (15, 10) \), \( (25, 4) \), \( (35, 6) \), \( (45, 7) \), \( (55, 3) \), \( (65, 2) \), \( (75, 2) \), \( (85, 3) \), \( (95, 9) \) and \( (105, 0) \), with class marks on the x-axis and frequencies on the y-axis, and joining them by straight line segments. The graph begins and ends on the x-axis, forming the required frequency polygon.

➕ More Examples

More Examples

Example 1

Question: The following table shows the heights (in cm) of 40 students of Class 9, recorded during their annual health check-up. Draw a frequency polygon for this data. Height (in cm): 130–140, 140–150, 150–160, 160–170, 170–180 Number of Students: 4, 9, 15, 8, 4

Solution: We first find the class mark of each class interval using the formula: Class Mark = \( \frac{\text{Lower Limit} + \text{Upper Limit}}{2} \) For 130–140: \[ \text{Class Mark} = \frac{130 + 140}{2} = 135 \] For 140–150: \[ \text{Class Mark} = \frac{140 + 150}{2} = 145 \] For 150–160: \[ \text{Class Mark} = \frac{150 + 160}{2} = 155 \] For 160–170: \[ \text{Class Mark} = \frac{160 + 170}{2} = 165 \] For 170–180: \[ \text{Class Mark} = \frac{170 + 180}{2} = 175 \] Next, we add two imaginary classes with frequency 0 to close the polygon: - Before the first class: 120–130, Class Mark = 125, Frequency = 0 - After the last class: 180–190, Class Mark = 185, Frequency = 0 The complete table of points to be plotted is: Class Mark: 125, 135, 145, 155, 165, 175, 185 Frequency: 0, 4, 9, 15, 8, 4, 0 To draw the frequency polygon: 1. Draw a horizontal axis (x-axis) representing class marks and a vertical axis (y-axis) representing frequency. 2. Plot the following points on the graph: \( (125,\ 0) \), \( (135,\ 4) \), \( (145,\ 9) \), \( (155,\ 15) \), \( (165,\ 8) \), \( (175,\ 4) \), \( (185,\ 0) \). 3. Join these points in order with straight line segments. The resulting closed figure is the required frequency polygon.

Answer: The frequency polygon is drawn by plotting (Class Mark, Frequency) points — \( (125,\ 0) \), \( (135,\ 4) \), \( (145,\ 9) \), \( (155,\ 15) \), \( (165,\ 8) \), \( (175,\ 4) \), \( (185,\ 0) \) — and joining them with straight lines.

Example 2

Question: The weekly pocket money (in rupees) of 60 school children is recorded in the table below. Draw a frequency polygon corresponding to this frequency distribution. Pocket Money (in Rs): 0–50, 50–100, 100–150, 150–200, 200–250, 250–300 Number of Children: 5, 12, 20, 13, 7, 3

Solution: We first find the class mark of each class interval. For 0–50: \[ \text{Class Mark} = \frac{0 + 50}{2} = 25 \] For 50–100: \[ \text{Class Mark} = \frac{50 + 100}{2} = 75 \] For 100–150: \[ \text{Class Mark} = \frac{100 + 150}{2} = 125 \] For 150–200: \[ \text{Class Mark} = \frac{150 + 200}{2} = 175 \] For 200–250: \[ \text{Class Mark} = \frac{200 + 250}{2} = 225 \] For 250–300: \[ \text{Class Mark} = \frac{250 + 300}{2} = 275 \] We verify the total: \[ 5 + 12 + 20 + 13 + 7 + 3 = 60 \] which matches the given total of 60 children. Next, we add imaginary classes with frequency 0 to close the polygon: - Before the first class: class interval is \( (-50)\text{–}0 \), so Class Mark = \( \frac{-50 + 0}{2} = -25 \), Frequency = 0 - After the last class: class interval is 300–350, so Class Mark = \( \frac{300 + 350}{2} = 325 \), Frequency = 0 The complete list of points to plot is: Class Mark: \( -25 \), 25, 75, 125, 175, 225, 275, 325 Frequency: 0, 5, 12, 20, 13, 7, 3, 0 To draw the frequency polygon: 1. Draw the x-axis to represent class marks (pocket money in Rs) and y-axis to represent frequency (number of children). 2. Plot the points: \( (-25,\ 0) \), \( (25,\ 5) \), \( (75,\ 12) \), \( (125,\ 20) \), \( (175,\ 13) \), \( (225,\ 7) \), \( (275,\ 3) \), \( (325,\ 0) \). 3. Join these consecutive points with straight line segments to form the frequency polygon.

Answer: The frequency polygon is drawn by plotting (Class Mark, Frequency) points — \( (-25,\ 0) \), \( (25,\ 5) \), \( (75,\ 12) \), \( (125,\ 20) \), \( (175,\ 13) \), \( (225,\ 7) \), \( (275,\ 3) \), \( (325,\ 0) \) — and joining them with straight lines.

🎯 Try a Similar Question

Try a Similar Question

Question: The weekly pocket money (in rupees) of 60 students of a school is recorded and grouped into class intervals as shown below. Draw a frequency polygon for this data. Weekly Pocket Money (in Rs) | Number of Students 0 – 20 | 4 20 – 40 | 7 40 – 60 | 12 60 – 80 | 18 80 – 100 | 11 100 – 120 | 6 120 – 140 | 2

Solution

  1. Step 1: Find the class marks: The class mark of each interval is the average of its lower and upper limits. For 0 – 20: class mark = \( \frac{0 + 20}{2} = 10 \) For 20 – 40: class mark = \( \frac{20 + 40}{2} = 30 \) For 40 – 60: class mark = \( \frac{40 + 60}{2} = 50 \) For 60 – 80: class mark = \( \frac{60 + 80}{2} = 70 \) For 80 – 100: class mark = \( \frac{80 + 100}{2} = 90 \) For 100 – 120: class mark = \( \frac{100 + 120}{2} = 110 \) For 120 – 140: class mark = \( \frac{120 + 140}{2} = 130 \)
  2. Step 2: Add imaginary classes at both ends: To close the frequency polygon on both sides of the x-axis, we add one imaginary class before the first interval and one after the last interval, each with frequency 0. Imaginary class before: \( -20 \) to \( 0 \), class mark = \( \frac{-20 + 0}{2} = -10 \), frequency = 0. Imaginary class after: \( 140 \) to \( 160 \), class mark = \( \frac{140 + 160}{2} = 150 \), frequency = 0.
  3. Step 3: List all points to be plotted: The points (class mark, frequency) to be plotted are: \( (-10,\; 0) \), \( (10,\; 4) \), \( (30,\; 7) \), \( (50,\; 12) \), \( (70,\; 18) \), \( (90,\; 11) \), \( (110,\; 6) \), \( (130,\; 2) \), \( (150,\; 0) \).
  4. Step 4: Draw the frequency polygon: Take the class marks on the x-axis and the frequencies on the y-axis. Plot each of the nine points listed above on the graph. Join them in order with straight line segments. The graph starts at \( (-10, 0) \) and ends at \( (150, 0) \), touching the x-axis at both ends, forming a closed frequency polygon.

Answer: The frequency polygon is obtained by plotting the points \( (-10, 0) \), \( (10, 4) \), \( (30, 7) \), \( (50, 12) \), \( (70, 18) \), \( (90, 11) \), \( (110, 6) \), \( (130, 2) \), and \( (150, 0) \), with class marks on the x-axis and frequencies on the y-axis, and joining them by straight line segments. The graph begins and ends on the x-axis, forming the required frequency polygon.

Everything you get with Solver7

More questions in Statistics