SOLVER7 Study. Nothing Else.
Exercise 12.1 Q4(i)

The length of \(40\) leaves of a plant are measured correct to one millimetre, and the obtained data is represented in the following table: Draw a histogram to represent the given data. [Hint: First make the class intervals continuous]

CBSE Class 9 Maths · Statistics

Solution

👶 Simple Explanation

Simple Explanation

Imagine sorting leaves by length into labelled boxes, then drawing tall towers to show how many leaves are in each box. A histogram is just that — a row of touching towers with no spaces between them. Before drawing, we nudge each box's edges slightly so the towers can sit right next to each other without gaps. The tallest tower here reaches height 12, sitting over the 144.5–153.5 mm range. That tells us most leaves measured between those two lengths.

Answer: The required histogram has bars drawn over the continuous intervals 117.5-126.5, 126.5-135.5, 135.5-144.5, 144.5-153.5, 153.5-162.5, 162.5-171.5, 171.5-180.5 with heights (frequencies) 3, 5, 9, 12, 5, 4, 2 respectively. The bars touch each other with no gaps, and the tallest bar (height 12) is over 144.5-153.5, showing this is the most common leaf length range.

📖 Histogram for Length of 40 Leaves

Detailed Explanation

A histogram is a graphical way of showing the distribution of grouped (continuous) data. It uses rectangles (bars) drawn next to each other with NO gaps, because the data is continuous. The width of each bar represents the class interval, and the height represents the frequency (number of leaves in that interval). In this question the given intervals are 118-126, 127-135, etc. These are discontinuous (there is a gap between 126 and 127). Before drawing a histogram we must first convert them into continuous class intervals so the bars can touch each other. We do this by finding the gap between the upper limit of one class and the lower limit of the next, taking half of it, subtracting this half from every lower limit and adding it to every upper limit. This gives us continuous (exclusive) class intervals.

Formula Used

Adjustment factor \( h = \frac{\text{(lower limit of a class)} - \text{(upper limit of previous class)}}{2} \). New lower limit \( = \text{old lower limit} - h \), New upper limit \( = \text{old upper limit} + h \).

Solution

  1. Step 1: Write the original data: The given table is: 118-126 has 3 leaves, 127-135 has 5 leaves, 136-144 has 9 leaves, 145-153 has 12 leaves, 154-162 has 5 leaves, 163-171 has 4 leaves, 172-180 has 2 leaves. The total is \( 3 + 5 + 9 + 12 + 5 + 4 + 2 = 40 \) leaves, which matches the question.
  2. Step 2: Find the adjustment factor: The classes are discontinuous. Take the gap between the upper limit of one class and the lower limit of the next class. For example, between 126 and 127 the gap is \( 127 - 126 = 1 \). Half of this gap is the adjustment factor. \[ h = \frac{1}{2} = 0.5 \]
  3. Step 3: Make the class intervals continuous: Subtract \( 0.5 \) from each lower limit and add \( 0.5 \) to each upper limit. This makes the classes continuous so the bars will touch. The new (continuous) intervals with their frequencies are: 117.5-126.5 has 3, 126.5-135.5 has 5, 135.5-144.5 has 9, 144.5-153.5 has 12, 153.5-162.5 has 5, 162.5-171.5 has 4, 171.5-180.5 has 2.
  4. Step 4: Choose the axes and scale: On the horizontal axis (x-axis) mark the continuous class intervals of length (in mm). Since the values start near 117.5 and not from 0, draw a kink (a zig-zag break) on the x-axis near the origin to show that the scale before 117.5 is not shown. On the vertical axis (y-axis) mark the number of leaves (frequency). A suitable scale is: on the y-axis let 1 unit represent 1 leaf, so the axis goes from 0 up to 12.
  5. Step 5: Draw the bars: For each continuous class interval draw a rectangle whose width covers that interval on the x-axis and whose height equals its frequency on the y-axis. The heights are: 117.5-126.5 -> height 3, 126.5-135.5 -> height 5, 135.5-144.5 -> height 9, 144.5-153.5 -> height 12 (tallest bar), 153.5-162.5 -> height 5, 162.5-171.5 -> height 4, 171.5-180.5 -> height 2. All bars are drawn adjacent to each other with no gaps because the data is continuous.
  6. Step 6: Label the histogram: Give the histogram a title such as 'Length of leaves', label the x-axis as 'Length (in mm)' and the y-axis as 'Number of leaves'. The completed diagram shows a peak at the interval 144.5-153.5, meaning most leaves have length between 145 mm and 153 mm.

Final Answer

The required histogram has bars drawn over the continuous intervals 117.5-126.5, 126.5-135.5, 135.5-144.5, 144.5-153.5, 153.5-162.5, 162.5-171.5, 171.5-180.5 with heights (frequencies) 3, 5, 9, 12, 5, 4, 2 respectively. The bars touch each other with no gaps, and the tallest bar (height 12) is over 144.5-153.5, showing this is the most common leaf length range.

Common Mistake

A very common mistake is drawing the histogram directly on the discontinuous intervals (118-126, 127-135, ...) and leaving gaps between the bars. For a histogram the class intervals must first be made continuous using the adjustment factor \( 0.5 \), and the bars must be drawn adjacent with no gaps. Another mistake is forgetting to show the kink (zig-zag) on the x-axis since the scale does not start from 0.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Record the Original Data: Write down the given frequency table as it appears in the question. The seven class intervals and their leaf counts are: 118–126 has 3 leaves, 127–135 has 5 leaves, 136–144 has 9 leaves, 145–153 has 12 leaves, 154–162 has 5 leaves, 163–171 has 4 leaves, 172–180 has 2 leaves. Verify the total: \[ 3 + 5 + 9 + 12 + 5 + 4 + 2 = 40 \] — Reason: Confirming the total is 40 ensures no data has been missed or misread.
  2. Step 2: Identify the Gap Between Consecutive Classes: Notice that the upper limit of the first class is 126, while the lower limit of the next class is 127. The gap between them is \( 127 - 126 = 1 \). — Reason: Because a histogram requires continuous (touching) bars, we must identify this gap so we can eliminate it by adjusting every class boundary.
  3. Step 3: Calculate the Adjustment Factor: Divide the gap by 2 to find the adjustment factor \( h \): \[ h = \frac{1}{2} = 0.5 \] — Reason: Subtracting \( h \) from each lower limit and adding \( h \) to each upper limit spreads the gap equally on both sides, turning all intervals into one seamless continuous scale.
  4. Step 4: Convert All Class Intervals to Continuous Form: Apply the adjustment to every class — subtract 0.5 from each lower limit and add 0.5 to each upper limit. The original interval 118–126 becomes \( 118 - 0.5 \) to \( 126 + 0.5 \), which is 117.5–126.5. Applying the same rule to all classes gives: 117.5–126.5, 126.5–135.5, 135.5–144.5, 144.5–153.5, 153.5–162.5, 162.5–171.5, and 171.5–180.5. — Reason: Each adjusted interval now shares a boundary with the next, so bars drawn over these intervals will touch without any gap.
  5. Step 5: Pair Each Continuous Interval with Its Frequency: The frequencies stay unchanged; only the boundaries shift. The updated table is: interval 117.5–126.5 has frequency 3, interval 126.5–135.5 has frequency 5, interval 135.5–144.5 has frequency 9, interval 144.5–153.5 has frequency 12, interval 153.5–162.5 has frequency 5, interval 162.5–171.5 has frequency 4, and interval 171.5–180.5 has frequency 2. — Reason: This paired table is the direct source for drawing the histogram — each interval defines the width of a bar and its frequency defines the bar's height.
  6. Step 6: Draw the Histogram: On the horizontal axis mark the continuous boundaries: 117.5, 126.5, 135.5, 144.5, 153.5, 162.5, 171.5, 180.5. On the vertical axis mark frequencies from 0 up to at least 12. Draw seven rectangles, one for each interval, with heights equal to 3, 5, 9, 12, 5, 4, 2 respectively. Each bar must touch the next — there should be no gap between them. The bar over 144.5–153.5 reaches height 12 and is the tallest. — Reason: The touching bars visually show that leaf length is a continuous measurement; the tallest bar instantly highlights the most common length range.

Final Answer

The required histogram has bars drawn over the continuous intervals 117.5-126.5, 126.5-135.5, 135.5-144.5, 144.5-153.5, 153.5-162.5, 162.5-171.5, 171.5-180.5 with heights (frequencies) 3, 5, 9, 12, 5, 4, 2 respectively. The bars touch each other with no gaps, and the tallest bar (height 12) is over 144.5-153.5, showing this is the most common leaf length range.

Common Mistake

One common mistake: Students forget to adjust the class intervals and draw bars directly over the original discontinuous intervals (118–126, 127–135, …), leaving visible gaps between bars — this is incorrect for a histogram of continuous data.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Original Data: Class intervals and frequencies: 118-126 \(\to\) 3, 127-135 \(\to\) 5, 136-144 \(\to\) 9, 145-153 \(\to\) 12, 154-162 \(\to\) 5, 163-171 \(\to\) 4, 172-180 \(\to\) 2.
  2. Step 2: Convert to Continuous Intervals: Subtract \( h = 0.5 \) from each lower limit and add \( 0.5 \) to each upper limit: 117.5-126.5, 126.5-135.5, 135.5-144.5, 144.5-153.5, 153.5-162.5, 162.5-171.5, 171.5-180.5.
  3. Step 3: Verify Total Frequency: \[ 3 + 5 + 9 + 12 + 5 + 4 + 2 = 40 \] Draw bars of heights 3, 5, 9, 12, 5, 4, 2 over the continuous intervals with no gaps.

Answer: The required histogram has bars drawn over the continuous intervals 117.5-126.5, 126.5-135.5, 135.5-144.5, 144.5-153.5, 153.5-162.5, 162.5-171.5, 171.5-180.5 with heights (frequencies) 3, 5, 9, 12, 5, 4, 2 respectively. The bars touch each other with no gaps, and the tallest bar (height 12) is over 144.5-153.5, showing this is the most common leaf length range.

➕ More Examples

More Examples

Example 1

Question: The weights (in kg) of 50 students of a class are recorded and represented in the following table. Draw a histogram to represent the given data (first make the class intervals continuous). Weight (in kg): 30 - 34, 35 - 39, 40 - 44, 45 - 49, 50 - 54, 55 - 59 Number of Students: 4, 8, 12, 14, 7, 5

Solution: The given class intervals are 30 - 34, 35 - 39, 40 - 44, 45 - 49, 50 - 54, 55 - 59. Step 1: Check for gaps between class intervals. The upper limit of the first class is 34 and the lower limit of the next class is 35. So the gap is: \[ \text{gap} = 35 - 34 = 1 \] Step 2: Calculate the adjustment. \[ \text{adjustment} = \frac{1}{2} = 0.5 \] Step 3: Make class intervals continuous by subtracting 0.5 from each lower limit and adding 0.5 to each upper limit. Continuous class intervals and their frequencies: 29.5 - 34.5 : 4 34.5 - 39.5 : 8 39.5 - 44.5 : 12 44.5 - 49.5 : 14 49.5 - 54.5 : 7 54.5 - 59.5 : 5 Verification: Total number of students = \( 4 + 8 + 12 + 14 + 7 + 5 = 50 \). This matches the given total. Step 4: Draw the histogram. On the x-axis, mark the continuous class boundaries: 29.5, 34.5, 39.5, 44.5, 49.5, 54.5, 59.5. On the y-axis, mark the frequencies: 0, 2, 4, 6, 8, 10, 12, 14. Draw rectangles with: - Base from 29.5 to 34.5 with height 4 - Base from 34.5 to 39.5 with height 8 - Base from 39.5 to 44.5 with height 12 - Base from 44.5 to 49.5 with height 14 - Base from 49.5 to 54.5 with height 7 - Base from 54.5 to 59.5 with height 5 Since all class widths are equal (each is 5), the height of each bar directly represents the frequency. The bar for the class 44.5 - 49.5 is the tallest (frequency = 14).

Answer: After making class intervals continuous (subtracting 0.5 from each lower limit and adding 0.5 to each upper limit), the continuous class boundaries are 29.5-34.5, 34.5-39.5, 39.5-44.5, 44.5-49.5, 49.5-54.5, 54.5-59.5 with frequencies 4, 8, 12, 14, 7, 5 respectively. The histogram is drawn with these boundaries on the x-axis and frequencies on the y-axis.

Example 2

Question: The daily earnings (in rupees) of 60 workers in a factory are given in the table below. Draw a histogram to represent the given data (first make the class intervals continuous). Daily Earnings (in Rs): 101 - 120, 121 - 140, 141 - 160, 161 - 180, 181 - 200, 201 - 220 Number of Workers: 6, 10, 16, 14, 9, 5

Solution: The given class intervals are 101 - 120, 121 - 140, 141 - 160, 161 - 180, 181 - 200, 201 - 220. Step 1: Check for gaps between class intervals. The upper limit of the first class is 120 and the lower limit of the next class is 121. So the gap is: \[ \text{gap} = 121 - 120 = 1 \] Step 2: Calculate the adjustment. \[ \text{adjustment} = \frac{1}{2} = 0.5 \] Step 3: Make class intervals continuous by subtracting 0.5 from each lower limit and adding 0.5 to each upper limit. Continuous class intervals and their frequencies: 100.5 - 120.5 : 6 120.5 - 140.5 : 10 140.5 - 160.5 : 16 160.5 - 180.5 : 14 180.5 - 200.5 : 9 200.5 - 220.5 : 5 Verification: Total number of workers = \( 6 + 10 + 16 + 14 + 9 + 5 = 60 \). This matches the given total. Step 4: Draw the histogram. On the x-axis, mark the continuous class boundaries: 100.5, 120.5, 140.5, 160.5, 180.5, 200.5, 220.5. On the y-axis, mark the frequencies: 0, 2, 4, 6, 8, 10, 12, 14, 16. Draw rectangles with: - Base from 100.5 to 120.5 with height 6 - Base from 120.5 to 140.5 with height 10 - Base from 140.5 to 160.5 with height 16 - Base from 160.5 to 180.5 with height 14 - Base from 180.5 to 200.5 with height 9 - Base from 200.5 to 220.5 with height 5 Since all class widths are equal (each is 20), the height of each bar directly represents the frequency. The bar for the class 140.5 - 160.5 is the tallest (frequency = 16).

Answer: After making class intervals continuous (subtracting 0.5 from each lower limit and adding 0.5 to each upper limit), the continuous class boundaries are 100.5-120.5, 120.5-140.5, 140.5-160.5, 160.5-180.5, 180.5-200.5, 200.5-220.5 with frequencies 6, 10, 16, 14, 9, 5 respectively. The histogram is drawn with these boundaries on the x-axis and frequencies on the y-axis.

🎯 Try a Similar Question

Try a Similar Question

Question: The weights (in kg) of 50 students of a class were recorded and the data is represented in the following table: Weight (in kg): 30–35, 36–41, 42–47, 48–53, 54–59, 60–65 Number of Students: 4, 7, 13, 16, 7, 3 Draw a histogram to represent the given data. (Hint: First make the class intervals continuous.)

Solution

  1. Step 1: Find the Gap Between Consecutive Class Intervals: The given class intervals are 30–35, 36–41, 42–47, 48–53, 54–59, and 60–65. These intervals are not continuous because there is a gap between them. The gap between consecutive classes is: Lower limit of next class − Upper limit of current class = 36 − 35 = 1. So the gap is 1, and we must add and subtract half the gap, i.e., \( \frac{1}{2} = 0.5 \), to make the intervals continuous.
  2. Step 2: Convert to Continuous Class Intervals: Subtract 0.5 from each lower limit and add 0.5 to each upper limit to get the continuous class intervals: - 30–35 becomes 29.5–35.5 - 36–41 becomes 35.5–41.5 - 42–47 becomes 41.5–47.5 - 48–53 becomes 47.5–53.5 - 54–59 becomes 53.5–59.5 - 60–65 becomes 59.5–65.5 Notice that consecutive intervals now share a common boundary, so they are truly continuous.
  3. Step 3: Prepare the Table for Drawing the Histogram: The revised frequency table with continuous intervals is: Continuous Interval | Number of Students (Frequency) 29.5–35.5 | 4 35.5–41.5 | 7 41.5–47.5 | 13 47.5–53.5 | 16 53.5–59.5 | 7 59.5–65.5 | 3 All class widths are equal: \( 35.5 - 29.5 = 6 \), \( 41.5 - 35.5 = 6 \), and so on. Since widths are equal, the height of each bar equals the frequency directly.
  4. Step 4: Set Up the Axes for the Histogram: Draw a horizontal axis (x-axis) and a vertical axis (y-axis). Mark the continuous class boundaries 29.5, 35.5, 41.5, 47.5, 53.5, 59.5, 65.5 on the x-axis. Label the x-axis as 'Weight (in kg)'. On the y-axis, mark a scale to accommodate the maximum frequency of 16. Label the y-axis as 'Number of Students'.
  5. Step 5: Draw the Bars of the Histogram: Draw rectangles (bars) over each continuous class interval with height equal to the corresponding frequency. The six bars are: - Bar over 29.5–35.5 with height 4 - Bar over 35.5–41.5 with height 7 - Bar over 41.5–47.5 with height 13 - Bar over 47.5–53.5 with height 16 - Bar over 53.5–59.5 with height 7 - Bar over 59.5–65.5 with height 3 All bars touch each other (no gaps), which distinguishes a histogram from a bar graph.
  6. Step 6: Interpret the Histogram: The total number of students represented is \( 4 + 7 + 13 + 16 + 7 + 3 = 50 \), which matches the given data. The tallest bar (height 16) is over the interval 47.5–53.5, meaning the weight range 48–53 kg is the most common among students. The histogram shows a roughly bell-shaped distribution with the modal class being 48–53 kg.

Answer: The required histogram has bars drawn over the continuous intervals 29.5–35.5, 35.5–41.5, 41.5–47.5, 47.5–53.5, 53.5–59.5, and 59.5–65.5 with heights (frequencies) 4, 7, 13, 16, 7, and 3 respectively. Each bar has width 6 kg. The bars touch each other with no gaps, and the tallest bar (height 16) is over 47.5–53.5, showing that the weight range 48–53 kg is the most common among the 50 students.

Everything you get with Solver7

More questions in Statistics