SOLVER7 Study. Nothing Else.
Exercise 5.1 Q2(v)

Give a definition for each of the following terms. Are there other terms that need to be defined first\(?\) What are they, and how might you define them\(?\) square

CBSE Class 9 Maths · Introduction To Euclids Geometry

Solution

👶 Simple Explanation

Simple Explanation

Imagine describing a square to someone who has never seen one. You would say it has four equal sides and four perfect corners. But what is a 'corner'? What is a 'side'? You need to explain those words first. In Euclid's geometry, every definition must be built on simpler words already explained. A square needs ideas like right angle, line segment, and quadrilateral explained before it. Even basic words like 'point' and 'line' are so simple that we just accept them without any definition at all.

Answer: Definition: A square is a quadrilateral with all four sides equal and all four angles equal to \( 90^\circ \). Terms that must be defined first: line segment, angle, right angle, quadrilateral, and 'equal length'. Basic terms like point and line are taken as undefined.

📖 Defining a Square (with Prerequisite Terms)

Detailed Explanation

In Euclid's geometry, a definition must be built from terms that have already been defined. If we try to define a square directly, we quickly notice that it uses ideas like 'sides', 'equal', 'angles' and 'right angles' — so those terms must be understood first. A square is a special quadrilateral, so before defining it we should be clear about a quadrilateral, its sides, its angles, and what a right angle means. Once those building blocks are in place, the square can be defined cleanly.

Formula Used

A square is a quadrilateral in which all four sides are equal and each of the four angles is a right angle, i.e. \( 90^\circ \).

Solution

  1. Step 1: Write the definition of a square: A square is a quadrilateral in which all four sides are equal in length and all four angles are right angles (each equal to \( 90^\circ \)).
  2. Step 2: Notice that this definition uses several other terms. To define a square, you must already know what a 'quadrilateral', 'sides', 'angles', 'equal (length)' and a 'right angle' are. These are the terms that need to be defined first.
  3. Step 3: Define the earlier terms in order. Quadrilateral: a closed figure formed by four line segments. This itself needs 'line segment' and 'closed figure', so we go one step back.
  4. Step 4: Line segment: a part of a line with two end points, written as \( \overline{AB} \). Angle: the figure formed by two rays with a common end point (the vertex).
  5. Step 5: Right angle: an angle whose measure is \( 90^\circ \). Equal sides: two sides are equal when they have the same length.
  6. Step 6: Now the square's definition rests only on already-defined terms. Some most basic terms such as 'point' and 'line' are left undefined (these are Euclid's undefined terms), because every definition must eventually start from a few accepted basic notions.

Final Answer

Definition: A square is a quadrilateral with all four sides equal and all four angles equal to \( 90^\circ \). Terms that must be defined first: line segment, angle, right angle, quadrilateral, and 'equal length'. Basic terms like point and line are taken as undefined.

Common Mistake

A common mistake is to define a square using terms that themselves are undefined or not yet explained (for example, using 'quadrilateral' without knowing what a quadrilateral is), instead of tracing the definition back to simpler, already-known terms.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Write the definition of a square clearly: A square is a quadrilateral whose four sides are all equal in length and whose four angles each measure \( 90^\circ \). — Reason: Stating the definition first makes it easy to spot which terms inside it still need to be explained.
  2. Step 2: Identify every term used inside that definition that itself requires a prior definition. The words 'quadrilateral', 'sides', 'equal length', 'angle', and 'right angle' all carry precise meanings that cannot be assumed. — Reason: Euclid's approach demands that no term in a definition be left unexplained unless it is a primitive (undefined) term.
  3. Step 3: Define 'line segment': a part of a line that lies between two fixed endpoints, denoted \( \overline{AB} \). The word 'line' itself is a primitive term — it is accepted without definition. — Reason: A quadrilateral is made of line segments, so we must know what a line segment is before defining a quadrilateral.
  4. Step 4: Define 'angle': the figure formed when two rays share a common endpoint called the vertex, written as \( \angle ABC \). — Reason: Both 'right angle' and the angles of a square are specific kinds of angles, so this building block must come first.
  5. Step 5: Define 'right angle': an angle whose measure is exactly \( 90^\circ \). — Reason: The definition of a square requires all four angles to be right angles, so we must be precise about what \( 90^\circ \) means.
  6. Step 6: Define 'quadrilateral': a closed figure formed by exactly four line segments joined end-to-end, where the segments are called its sides. 'Equal length' means two segments that can be made to coincide exactly, i.e., they have the same measure. — Reason: A square is a special quadrilateral, so the parent shape must be defined before the special case.
  7. Step 7: Recognise that 'point' and 'line' are left undefined (primitive terms) — they are the ultimate starting points of Euclid's system. Every other geometric term is built from these. — Reason: No definition can go on forever; Euclid stops at a small set of primitives that are intuitively understood but not formally defined.
  8. Step 8: Assemble the complete answer: the definition of a square rests on the prior definitions of line segment, angle, right angle, quadrilateral, and equal length. Point and line are taken as undefined primitives. — Reason: This chain shows how Euclidean geometry is logically layered, with each definition depending only on terms already established.

Final Answer

Definition: A square is a quadrilateral with all four sides equal and all four angles equal to \( 90^\circ \). Terms that must be defined first: line segment, angle, right angle, quadrilateral, and 'equal length'. Basic terms like point and line are taken as undefined.

Common Mistake

One common mistake: students list only 'quadrilateral' as a prerequisite and forget that 'angle', 'right angle', 'line segment', and 'equal length' also require prior definitions before a complete, rigorous definition of a square can be stated.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Definition of a square: A quadrilateral with all four sides equal in length and all four angles equal to \( 90^\circ \).
  2. Step 2: Terms that must be defined before defining a square: line segment, angle, right angle \( (90^\circ) \), quadrilateral, and equal length.
  3. Step 3: Undefined (primitive) terms on which all definitions ultimately rest: point and line.

Answer: Definition: A square is a quadrilateral with all four sides equal and all four angles equal to \( 90^\circ \). Terms that must be defined first: line segment, angle, right angle, quadrilateral, and 'equal length'. Basic terms like point and line are taken as undefined.

➕ More Examples

More Examples

Example 1

Question: Give a precise definition of a Rectangle. Identify any terms that must be defined before a rectangle can be defined, and explain briefly how each of those prior terms might be defined.

Solution: To define a rectangle, we must first identify and define the terms it depends on. Prior terms needed: 1. Point: A point is an exact location in space. It has no length, no breadth, and no thickness. It is represented by a dot and named by a capital letter. (A point is an undefined term in Euclid's geometry — we accept its meaning intuitively.) 2. Line Segment: Given two distinct points A and B, the straight path from A to B, including both endpoints, is called a line segment, denoted \( \overline{AB} \). Its length is the distance between A and B. 3. Right Angle: When a ray stands on a line such that the two adjacent angles formed are equal, each of those angles is called a right angle, and its measure is \( 90^\circ \). 4. Equal Lengths: Two line segments \( \overline{AB} \) and \( \overline{CD} \) are said to have equal length (i.e., \( \overline{AB} = \overline{CD} \)) if one can be placed exactly over the other so that the endpoints coincide. (This relies on Euclid's notion of congruence.) 5. Quadrilateral: A closed figure formed by joining four distinct points (called vertices), no three of which are collinear, by four line segments (called sides) such that adjacent sides share exactly one endpoint and non-adjacent sides do not intersect. Definition of a Rectangle: A rectangle is a quadrilateral in which all four interior angles are right angles (each equal to \( 90^\circ \)) and opposite sides are equal in length. If the sides of the rectangle have lengths \( l \) and \( b \), then opposite sides satisfy: \[ \text{side}_1 = \text{side}_3 = l \quad \text{and} \quad \text{side}_2 = \text{side}_4 = b \] and each interior angle equals \( 90^\circ \).

Answer: A rectangle is a quadrilateral with all four angles equal to \( 90^\circ \) and opposite sides equal. Prior terms needed: point, line segment, right angle, equal lengths, and quadrilateral.

Example 2

Question: Give a precise definition of an Equilateral Triangle. Identify any terms that must be defined before an equilateral triangle can be defined, and explain briefly how each of those prior terms might be defined.

Solution: To define an equilateral triangle, we must first identify and define the terms it depends on. Prior terms needed: 1. Point: A point is an exact location in space with no dimensions (no length, breadth, or thickness). In Euclid's geometry, a point is an undefined term accepted intuitively. 2. Line Segment: Given two distinct points P and Q, the set of all points lying between P and Q together with P and Q themselves is called a line segment \( \overline{PQ} \). Its length is the distance from P to Q. 3. Equal Lengths: Two line segments are said to be equal in length if one can be superimposed exactly on the other so that their endpoints coincide. 4. Triangle: A triangle is a closed figure formed by joining three non-collinear points A, B, and C by three line segments \( \overline{AB} \), \( \overline{BC} \), and \( \overline{CA} \). The points A, B, C are its vertices and the segments are its sides. Definition of an Equilateral Triangle: An equilateral triangle is a triangle in which all three sides are equal in length. So for \( \triangle ABC \) to be equilateral, we need: \[ \overline{AB} = \overline{BC} = \overline{CA} \] Note: A consequence (provable in Euclidean geometry) is that all three interior angles are also equal, each measuring \( 60^\circ \), since: \[ \angle A + \angle B + \angle C = 180^\circ \] and \( \angle A = \angle B = \angle C \), giving: \[ 3 \times \angle A = 180^\circ \] so \( \angle A = 60^\circ \).

Answer: An equilateral triangle is a triangle in which all three sides are equal: \( \overline{AB} = \overline{BC} = \overline{CA} \). Prior terms needed: point, line segment, equal lengths, and triangle.

🎯 Try a Similar Question

Try a Similar Question

Question: Give a precise definition of a rectangle. Are there other terms that need to be defined before you can state this definition? List those terms and briefly explain how each would be defined. Which terms, if any, are left undefined?

Solution

  1. Step 1: Identify what a rectangle is: A rectangle is a special type of quadrilateral. To define it precisely, we say: A rectangle is a quadrilateral in which all four interior angles are equal to \( 90^\circ \) and each pair of opposite sides are equal in length and parallel to each other.
  2. Step 2: List the terms that must be defined first: Before defining a rectangle, the following terms must themselves be defined: 1. Point — taken as an undefined (primitive) term, as Euclid did. It has position but no dimension. 2. Line — also taken as undefined; it extends infinitely in both directions with no breadth. 3. Line segment — a part of a line bounded by two distinct endpoints. 4. Angle — the figure formed by two rays sharing a common endpoint (the vertex). 5. Right angle — an angle whose measure is exactly \( 90^\circ \). 6. Quadrilateral — a closed figure bounded by exactly four line segments (sides). 7. Parallel lines — two lines in the same plane that never meet, no matter how far extended. 8. Equal length — two line segments are of equal length if they can be made to coincide exactly when one is placed on the other (or equivalently, if their measures are the same).
  3. Step 3: State which terms are left undefined: Following Euclid's approach, the terms 'point' and 'line' are taken as undefined (primitive) terms. They are so fundamental that defining them precisely requires even more basic ideas, leading to an endless chain. Instead, their properties are described through axioms and postulates.
  4. Step 4: Write the complete definition clearly: A rectangle is a quadrilateral in which all four interior angles are right angles (each equal to \( 90^\circ \)) and opposite sides are equal and parallel. This definition depends on the prior definitions of: line segment, angle, right angle, quadrilateral, parallel lines, and equal length. The terms 'point' and 'line' are left as undefined primitives.

Answer: Definition: A rectangle is a quadrilateral in which every interior angle equals \( 90^\circ \) and opposite sides are equal in length and parallel. Terms that must be defined first: line segment, angle, right angle, quadrilateral, parallel lines, and equal length. Basic terms like point and line are taken as undefined primitives.

Everything you get with Solver7

More questions in Introduction To Euclids Geometry