SOLVER7 Study. Nothing Else.
Exercise 5.1 Q2(iv)

Give a definition for each of the following terms. Are there other terms that need to be defined first\(?\) What are they, and how might you define them\(?\) radius of a circle

CBSE Class 9 Maths · Introduction To Euclids Geometry

Solution

👶 Simple Explanation

Simple Explanation

Imagine a wheel. The centre of the wheel is the middle point. Any straight line drawn from that middle point to the edge of the wheel is called the radius. Every such line is exactly the same length. Before we can explain what a radius is, we need to know what a point, a plane, a circle, and a centre mean. A circle is just all the points that are the same distance away from one special middle point.

Answer: Radius of a circle: the line segment joining the centre of the circle to any point on the circle (and its length \( r \)). Terms that must be defined first: point, plane, distance, circle, and centre. A circle is the set of all points in a plane at a fixed distance from a fixed point (the centre); the radius is exactly that fixed distance.

📖 Defining the Radius of a Circle

Detailed Explanation

In geometry, a good definition uses only words or terms that have already been defined. The word 'radius' cannot be defined on its own — it depends on other ideas. To define the radius of a circle, we must first know what a 'point', a 'circle', and the 'centre' of a circle mean. A circle is the collection of all points in a plane that are at a fixed distance from a fixed point in the plane. That fixed point is called the centre. The radius is then the distance from the centre to any point on the circle. Because every point on the circle is the same fixed distance from the centre, this distance (the radius) is the same everywhere.

Formula Used

Radius \( r \) = distance from the centre \( O \) to any point \( P \) on the circle, i.e. \( r = OP \).

Solution

  1. Step 1: Identify the terms that must be defined first. Before defining 'radius', we need the terms: point, plane, distance, circle, and centre of a circle. These are the building blocks.
  2. Step 2: Define the earlier terms briefly. A point marks a position and has no length, breadth or thickness. A circle is the set of all points in a plane that are at a fixed distance from a fixed point in that plane.
  3. Step 3: Define the centre. The fixed point from which all points of the circle are at the same distance is called the centre of the circle. We usually name it \( O \).
  4. Step 4: Now define the radius using these terms. The radius of a circle is the line segment joining the centre to any point on the circle, and also the length of this segment. If \( O \) is the centre and \( P \) is any point on the circle, then \( \overline{OP} \) is a radius and \( OP = r \).
  5. Step 5: Explain why the definition works. Since a circle is defined as all points at a fixed distance from the centre, every such segment \( OP \) has the same length. This is why we can speak of 'the radius' as a single fixed value \( r \).

Final Answer

Radius of a circle: the line segment joining the centre of the circle to any point on the circle (and its length \( r \)). Terms that must be defined first: point, plane, distance, circle, and centre. A circle is the set of all points in a plane at a fixed distance from a fixed point (the centre); the radius is exactly that fixed distance.

Common Mistake

A common mistake is defining the radius as 'half of the diameter' or as 'a line from one side of the circle to the other'. That confuses radius with diameter and also uses an undefined term. The correct primary idea is that the radius connects the centre to a point on the circle, and the diameter is defined later using the radius.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Recognise that a good geometric definition relies only on previously defined terms. Before we can define 'radius', we must list every term it depends on. — Reason: If we use an undefined word inside a definition, the definition becomes circular or meaningless.
  2. Step 2: Identify the prerequisite terms: point, plane, distance, circle, and centre of a circle. These five ideas are the building blocks for defining radius. — Reason: Each of these must already be understood so that our final definition of radius is logically complete.
  3. Step 3: Define 'point' and 'plane'. A point marks an exact location and has no length, breadth, or thickness. A plane is a flat, two-dimensional surface that extends infinitely in all directions. — Reason: A circle and its radius exist within a plane, so both terms are needed before we can talk about a circle.
  4. Step 4: Define 'circle' using the terms above. A circle is the set of all points in a plane that lie at a fixed distance from a single fixed point in that same plane. — Reason: With 'point', 'plane', and 'distance' already defined, we now have a precise meaning for 'circle'.
  5. Step 5: Define the 'centre'. The fixed point from which every point on the circle is equidistant is called the centre of the circle, commonly labelled \( O \). — Reason: The centre is the reference point from which radius is measured, so it must be defined before radius.
  6. Step 6: Now define the radius using all previously established terms. The radius of a circle is the line segment \( \overline{OP} \) joining the centre \( O \) to any point \( P \) on the circle. Its length is \( r = OP \), which equals the fixed distance used in the definition of the circle. — Reason: Because every point on the circle is at the same fixed distance from the centre, every such segment has the same length, making 'radius' a well-defined, unique measurement.

Final Answer

Radius of a circle: the line segment joining the centre of the circle to any point on the circle (and its length \( r \)). Terms that must be defined first: point, plane, distance, circle, and centre. A circle is the set of all points in a plane at a fixed distance from a fixed point (the centre); the radius is exactly that fixed distance.

Common Mistake

One common mistake: students try to define 'radius' directly without first establishing what a 'circle' or 'centre' means, making their definition logically incomplete — always build up from simpler, already-defined terms.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Terms needed before defining radius: point, plane, distance, circle, centre.
  2. Step 2: Circle: set of all points in a plane at a fixed distance from a fixed point (the centre \( O \)).
  3. Step 3: Radius: line segment \( OP \) joining centre \( O \) to any point \( P \) on the circle; its length \( r = OP \).

Answer: Radius of a circle: the line segment joining the centre of the circle to any point on the circle (and its length \( r \)). Terms that must be defined first: point, plane, distance, circle, and centre. A circle is the set of all points in a plane at a fixed distance from a fixed point (the centre); the radius is exactly that fixed distance.

➕ More Examples

More Examples

Example 1

Question: Give a precise definition of the diameter of a circle. Identify any terms that need to be defined before you can state this definition, and briefly explain how you would define each of those prior terms.

Solution: To define the diameter of a circle, we must first set up the following foundational terms in order. Step 1 — Undefined (primitive) terms: The terms point and line are taken as undefined (primitive) terms in Euclidean geometry, just as Euclid himself accepted them without formal definition. Step 2 — Define a plane: A plane is a flat, two-dimensional surface that extends infinitely in all directions. It is determined by three non-collinear points. Step 3 — Define a circle: A circle is the set of all points in a plane that are at a fixed distance from a fixed point in that plane. The fixed point is called the centre of the circle. Step 4 — Define a chord: A chord is a line segment whose two endpoints both lie on the circle. Step 5 — Define the diameter: A diameter of a circle is a chord that passes through the centre of the circle. In other words, it is a line segment with both endpoints on the circle such that it passes through the centre. Consequence: Because the centre divides the diameter into two equal halves, the length of the diameter is exactly twice the radius. If the radius is \( r \), then the diameter \( d \) satisfies \[ d = 2r. \] No diameter can be drawn without first defining the centre, the circle, and the chord — which is why those definitions come first.

Answer: A diameter is a chord of a circle that passes through the centre. Prior terms needed (in order): point (undefined), plane, circle (and its centre), chord.

Example 2

Question: Give a precise definition of a chord of a circle. State which terms must be defined before a chord can be defined, and provide a brief definition for each of those prior terms.

Solution: To define a chord, we build up definitions in the following sequence. Step 1 — Undefined (primitive) terms: The notion of a point is accepted as a primitive (undefined) term following Euclid's approach, since any attempt to define it uses even simpler spatial ideas that cannot themselves be defined. Step 2 — Define a line segment: A line segment is a straight path between two distinct points \( A \) and \( B \), including both endpoints. It is denoted \( \overline{AB} \) and has a definite, finite length equal to the distance between \( A \) and \( B \). Step 3 — Define a circle: A circle is the collection of all points in a plane that are at the same fixed distance (called the radius) from a fixed point called the centre. Step 4 — Define a chord: A chord of a circle is a line segment whose both endpoints lie on the circle. Important observations: (a) Not every chord passes through the centre. (b) The longest chord of any circle is the one that does pass through the centre; that special chord is called the diameter, and if the radius is \( r \) its length is \[ 2r. \] (c) Every diameter is a chord, but not every chord is a diameter. Thus, to arrive at the definition of a chord, we needed the prior definitions of point (primitive), line segment, and circle.

Answer: A chord is a line segment with both its endpoints on the circle. Prior terms needed (in order): point (undefined/primitive), line segment, circle.

🎯 Try a Similar Question

Try a Similar Question

Question: Give a precise definition of a chord of a circle. Identify all the terms that must be defined before you can state this definition, and briefly explain how each of those prior terms should be defined.

Solution

  1. Step 1 – Identify the foundational terms needed first: Before defining a chord, we need the following terms to already be defined: (i) Point — a point is an exact location in space; it has no length, breadth, or thickness. (ii) Line segment — a line segment \( \overline{AB} \) is the set of all points between two given points \( A \) and \( B \) (including \( A \) and \( B \) themselves). (iii) Distance — the length of the line segment joining two points. (iv) Circle — the set of all points in a plane that are at a fixed distance (called the radius) from a fixed point (called the centre). Without these four ideas already defined, the word 'chord' cannot be stated meaningfully.
  2. Step 2 – Define a circle precisely: A circle with centre \( O \) and radius \( r \) is the set of all points \( P \) in a plane such that \( OP = r \), where \( r > 0 \). Every point on the circle is at exactly the same distance \( r \) from \( O \).
  3. Step 3 – Define a chord: A chord of a circle is a line segment whose two endpoints both lie on the circle. In other words, if \( A \) and \( B \) are any two points on a circle, then the line segment \( \overline{AB} \) is called a chord of that circle.
  4. Step 4 – Note the special case: diameter: When a chord passes through the centre \( O \) of the circle, it is called a diameter. The diameter is the longest possible chord, and its length equals \( 2r \), where \( r \) is the radius. This shows that the diameter is a special chord, not a separate undefined idea — it follows directly from the definition of a chord combined with the definition of the centre.
  5. Step 5 – Summarise: Terms that must be defined first, in order: point, plane, distance, line segment, circle (and its centre and radius). Once these are in place, a chord is simply defined as a line segment joining any two points on the circle.

Answer: A chord of a circle is a line segment \( \overline{AB} \) where both endpoints \( A \) and \( B \) lie on the circle. Terms that must be defined before this: point, plane, distance, line segment, and circle. A circle is the set of all points in a plane at a fixed distance \( r \) (the radius) from a fixed point (the centre). A chord is any line segment connecting two points on this circle; the longest chord, which passes through the centre, is called the diameter and has length \( 2r \).

Everything you get with Solver7

More questions in Introduction To Euclids Geometry