SOLVER7 Study. Nothing Else.
Exercise 5.1 Q2(iii)

Give a definition for each of the following terms. Are there other terms that need to be defined first\(?\) What are they, and how might you define them\(?\) line segment

CBSE Class 9 Maths · Introduction To Euclids Geometry

Solution

👶 Simple Explanation

Simple Explanation

Imagine drawing two dots on a piece of paper and connecting them with a straight path. That path, including both dots, is called a line segment, written as \( \overline{AB} \). But to explain this, you must already know what a dot (point) is and what a straight path (line) is. A point is just a location with no size at all. A line goes on forever in both directions with no thickness.

Answer: A line segment is the part of a line lying between two points (called its endpoints), together with those two points; it is denoted by \( \overline{AB} \). Yes, other terms need to be defined first: point (that which has no part) and line (that which extends endlessly in both directions with no thickness). In modern geometry, point and line are actually taken as undefined terms.

📖 Defining a Line Segment

Detailed Explanation

In Euclid's Geometry, before we define any term we must check whether the words used in the definition are themselves already understood. A line segment is a part of a line that has two endpoints. But to state this clearly, we must first know what a point is and what a line is. In fact, in modern geometry point, line and plane are taken as undefined terms because every attempt to define them uses other terms that are themselves undefined. However, for a Class 9 answer we describe them intuitively and then use them to define a line segment. So the chain of terms is: point, then line, and finally line segment.

Formula Used

A line segment with endpoints A and B is written as \( \overline{AB} \).

Solution

  1. Step 1: Identify the terms needed first. To define a line segment we use the words point and line. So these two terms must be understood before we can define a line segment.
  2. Step 2: Define a point. A point is that which has no part, that is, it has no length, no breadth and no thickness. It only marks a position or location. (Point is actually taken as an undefined term, but we describe it this way for understanding.)
  3. Step 3: Define a line. A line is a set of points that extends endlessly in both directions and has no thickness. It has length but no breadth. (Line is also an undefined term, described intuitively here.)
  4. Step 4: Now define a line segment. A line segment is the part of a line that lies between two given points, including those two points. These two points are called the endpoints of the segment.
  5. Step 5: State the notation. If the two endpoints are A and B, the line segment is denoted by \( \overline{AB} \). Unlike a line, a line segment has a definite, fixed length and does not extend beyond its endpoints.

Final Answer

A line segment is the part of a line lying between two points (called its endpoints), together with those two points; it is denoted by \( \overline{AB} \). Yes, other terms need to be defined first: point (that which has no part) and line (that which extends endlessly in both directions with no thickness). In modern geometry, point and line are actually taken as undefined terms.

Common Mistake

A common mistake is to confuse a line segment with a line. A line extends endlessly in both directions and has no endpoints, while a line segment has two fixed endpoints and a definite length \( \overline{AB} \).

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Ask: what words appear inside the definition of a line segment? A line segment is described as 'a part of a line lying between two points.' The words 'line' and 'point' appear here — Reason: Before we can define any term, every word used in that definition must already be understood, so we must track down the meaning of 'point' and 'line' first.
  2. Step 2: Define a point first, since it is the most basic building block. A point is that which has no part — it has no length, no breadth, and no thickness; it only marks a location in space — Reason: A line is made up of points, so we cannot talk about a line until we know what a point is.
  3. Step 3: Using the idea of a point, now define a line. A line is a collection of points that extends endlessly in both directions and has no thickness — it has length but no breadth, and it can be drawn straight without any curve — Reason: The definition of a line segment specifically says 'a part of a line,' so the word 'line' must be defined before we can define a line segment.
  4. Step 4: With both 'point' and 'line' now understood, define a line segment. A line segment is the portion of a line that lies between two fixed points, including those two points themselves (called its endpoints). It is written as \( \overline{AB} \) when A and B are the endpoints — Reason: Now that the prerequisite terms are established, we can state the definition of a line segment completely and unambiguously.
  5. Step 5: Recognise an important note from modern geometry: even though we described 'point' and 'line' above, no truly satisfying definition of either term is possible without using other equally undefined words. For example, defining a point as a 'location' requires us to define 'location.' Because of this infinite regress, modern geometry officially treats point, line, and plane as undefined terms — Reason: This is why Euclid's own definitions are considered intuitive descriptions rather than rigorous mathematical definitions.

Final Answer

A line segment is the part of a line lying between two points (called its endpoints), together with those two points; it is denoted by \( \overline{AB} \). Yes, other terms need to be defined first: point (that which has no part) and line (that which extends endlessly in both directions with no thickness). In modern geometry, point and line are actually taken as undefined terms.

Common Mistake

One common mistake: students often define a line segment without realising they have used the words 'point' and 'line' without first defining them — always check that every term inside a definition is itself already understood or defined.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Terms required before defining a line segment: point, then line.
  2. Step 2: Point — that which has no part (no length, breadth, or thickness); marks only a position.
  3. Step 3: Line — extends endlessly in both directions with no thickness; has length but no breadth.
  4. Step 4: Line segment \( \overline{AB} \) — the part of a line lying between two endpoints A and B, including both endpoints.

Answer: A line segment is the part of a line lying between two points (called its endpoints), together with those two points; it is denoted by \( \overline{AB} \). Yes, other terms need to be defined first: point (that which has no part) and line (that which extends endlessly in both directions with no thickness). In modern geometry, point and line are actually taken as undefined terms.

➕ More Examples

More Examples

Example 1

Question: Give a definition for the term 'ray'. Identify any terms that must be defined before 'ray' can be properly defined, and explain how you would define those prior terms.

Solution: Before defining a ray, we need definitions for the following foundational terms: Point: A point is an exact location in space. It has no length, breadth, or thickness. It is represented by a dot and named by a capital letter, e.g., point A. Line: A line is a straight figure that extends infinitely in both directions. It has no endpoints, no thickness, and no width. It is determined by any two distinct points lying on it. The line through points P and Q is written as line PQ. Line Segment: A line segment is a part of a line that has two distinct endpoints. The segment with endpoints A and B is denoted \( \overline{AB} \) and has a definite, measurable length. Now, using these, we define a Ray: A ray is a part of a line that has one fixed starting point (called the initial point or endpoint) and extends infinitely in exactly one direction. If the starting point is A and the ray passes through point B, the ray is denoted \( \overrightarrow{AB} \). Thus, the terms that must be defined first are: point, line, and line segment. Without a clear idea of what a point and a line are, the notion of 'starting point' and 'direction' used in the definition of a ray would be meaningless.

Answer: A ray is a part of a line with one endpoint extending infinitely in one direction. Prior terms needed: point (an exact location with no dimension), line (a straight figure with no endpoints, extending infinitely both ways), and line segment (a part of a line with two distinct endpoints).

Example 2

Question: Give a definition for the term 'angle'. Identify any terms that need to be defined before 'angle' can be properly understood, and explain how you would define them.

Solution: To define an angle, we need to first establish the following: Point: A point is an exact position or location in space. It has no dimensions — no length, no breadth, and no thickness. It is represented as a dot and labelled with a capital letter. Line: A line is a collection of points arranged in a straight path extending infinitely in both directions. It has no endpoints and no thickness. Line Segment: A line segment is the part of a line bounded by two distinct endpoints. The segment from point A to point B, written \( \overline{AB} \), has a fixed, finite length. Ray: A ray is a part of a line that begins at a fixed point (the initial point) and goes on infinitely in one direction. The ray starting at vertex O and passing through point A is written \( \overrightarrow{OA} \). Now we can define an Angle: An angle is the figure formed by two rays that share a common initial point called the vertex. If ray \( \overrightarrow{OA} \) and ray \( \overrightarrow{OB} \) share the vertex O, the angle formed is written \( \angle AOB \) and is measured in degrees \( (^\circ) \). The measure of an angle describes the amount of rotation from one ray to the other about the vertex. For example, a right angle measures \( 90^\circ \), and a straight angle measures \( 180^\circ \). Therefore, to define an angle, one must first define: point, line, line segment, and ray — in that order, as each definition depends on the one before it.

Answer: An angle is the figure formed by two rays sharing a common vertex. Prior terms needed: point (a dimensionless location), line (infinite straight path through points), line segment (part of a line with two endpoints), and ray (part of a line with one endpoint, extending infinitely in one direction).

🎯 Try a Similar Question

Try a Similar Question

Question: Give a definition for a ray. Are there other terms that need to be defined first before defining a ray? If so, what are they, and how might you define them? Also, write the standard notation used to represent a ray starting at point P and passing through point Q.

Solution

  1. Step 1 – Identify the term to be defined: We need to define a ray. A ray is a part of a line, so we first think about what concepts are needed before we can define it.
  2. Step 2 – Identify terms needed before defining a ray: To define a ray, we must first know what a 'point' and a 'line' are, since a ray starts at a point and extends along a line. These two terms — point and line — are actually taken as undefined terms (primitive terms) in modern Euclidean geometry, because they are so fundamental that they cannot be defined using simpler geometric terms. Euclid described a point as 'that which has no part' and a line as 'a breadthless length that extends endlessly in both directions,' but these are descriptive, not formal definitions.
  3. Step 3 – Define 'ray': A ray is the part of a line that starts at a fixed point (called the initial point or endpoint) and extends endlessly in one direction only. It has a definite starting point but no endpoint on the other side.
  4. Step 4 – Write the standard notation: A ray starting at point P and passing through point Q is denoted by \( \overrightarrow{PQ} \). The arrow above \( \overrightarrow{PQ} \) points from P toward Q, indicating the direction in which the ray extends infinitely. Note that \( \overrightarrow{PQ} \) and \( \overrightarrow{QP} \) are different rays — they have different initial points and extend in opposite directions.
  5. Step 5 – Summarise the hierarchy of terms: In summary: 'point' and 'line' are undefined (primitive) terms. Using these, we define a 'ray' as a part of a line with one endpoint, extending infinitely in one direction, denoted \( \overrightarrow{PQ} \).

Answer: A ray is a part of a line that begins at a fixed initial point (endpoint) and extends endlessly in one direction. It is denoted \( \overrightarrow{PQ} \), where P is the initial point and Q is any other point on the ray. Yes, the terms 'point' and 'line' must be defined (or acknowledged) first. In modern geometry, both point and line are taken as undefined (primitive) terms — Euclid described a point as 'that which has no part' and a line as 'a breadthless length,' but these are purely descriptive. Unlike the definition of a line segment (which lies between two fixed endpoints), a ray has only one endpoint and extends infinitely in one direction.

Everything you get with Solver7

More questions in Introduction To Euclids Geometry