SOLVER7 Study. Nothing Else.
Exercise 5.1 Q2(i)

Give a definition for each of the following terms. Are there other terms that need to be defined first\(?\) What are they, and how might you define them\(?\) parallel lines

CBSE Class 9 Maths · Introduction To Euclids Geometry

Solution

👶 Simple Explanation

Simple Explanation

Imagine two train tracks running side by side — they never cross, no matter how far they go. That is what parallel lines are: two lines on the same flat surface that never meet, written as \( l \parallel m \). To explain this, we need to know what a 'line' and a 'plane' even mean. Mathematicians tried to define them, but every definition used other tricky words. So 'point', 'line', and 'plane' are just accepted as basic ideas everyone agrees on without a formal definition.

Answer: Parallel lines are two lines lying in the same plane that never intersect however far they are produced, written \( l \parallel m \). To state this definition, the terms 'point', 'line' and 'plane' must be understood first. A point can be thought of as a mark of position with no dimension, a line as a breadthless length extending endlessly both ways, and a plane as a flat surface extending endlessly. However, these attempted definitions use other undefined words, so in geometry point, line and plane are finally taken as undefined (basic) terms.

📖 Definition of Parallel Lines

Detailed Explanation

In Euclid's geometry, a definition is only meaningful if the words used inside it are already understood. So before we define 'parallel lines', we must first be clear about some more basic terms. To talk about parallel lines we first need the idea of a line, and the idea of a point. Euclid tried to define a point as 'that which has no part' and a line as 'breadthless length', but these definitions themselves use words like 'part', 'breadth' and 'length' which are not defined. Because of this endless chain, in modern geometry we treat point, line and plane as undefined terms (we only build an intuitive idea of them). Once we accept a line, we can define what it means for two lines to be parallel. Two lines in the same plane are said to be parallel if they never meet, no matter how far they are extended in either direction. We write it as \( l \parallel m \).

Formula Used

If two lines \( l \) and \( m \) lie in the same plane and do not intersect however far produced, then \( l \parallel m \).

Solution

  1. Step 1: State the definition asked for. Parallel lines are two (or more) lines in the same plane that do not intersect each other however far they are extended on both sides. Symbolically we write \( l \parallel m \).
  2. Step 2: Identify the terms used inside this definition. The definition of parallel lines uses the words 'line', 'plane' (same plane), 'point' (through the idea of intersecting or meeting), and 'intersect'. These must be understood before the definition can make sense.
  3. Step 3: Check which of these need to be defined first. To say two lines are parallel we must first know what a 'line' is, what a 'point' is (two lines meet at a point), and what a 'plane' is (parallel lines must be in the same plane, i.e. coplanar). So point, line and plane must come first.
  4. Step 4: Try to define those basic terms. A point might be described as a mark of position having no length, breadth or thickness. A line might be described as a straight arrangement of points extending endlessly in both directions with no thickness. A plane might be described as a flat surface extending endlessly in all directions.
  5. Step 5: Notice the difficulty. Each of these attempts uses further undefined words such as 'position', 'length', 'breadth', 'flat', 'surface'. This chain never ends, so it is impossible to define everything. Because of this, in geometry we accept point, line and plane as undefined (basic) terms and only form an intuitive picture of them.
  6. Step 6: Conclude. Once we accept point, line and plane as undefined terms, the definition of parallel lines becomes clear: two lines in the same plane that never meet, written \( l \parallel m \).

Final Answer

Parallel lines are two lines lying in the same plane that never intersect however far they are produced, written \( l \parallel m \). To state this definition, the terms 'point', 'line' and 'plane' must be understood first. A point can be thought of as a mark of position with no dimension, a line as a breadthless length extending endlessly both ways, and a plane as a flat surface extending endlessly. However, these attempted definitions use other undefined words, so in geometry point, line and plane are finally taken as undefined (basic) terms.

Common Mistake

A common mistake is to forget the phrase 'in the same plane'. Two lines that never meet must also be coplanar to be called parallel; lines in different planes that never meet are called skew lines, not parallel lines.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Write down the definition of parallel lines: Two straight lines that lie in the same plane and never meet each other, no matter how far they are extended in both directions, are called parallel lines. We denote this as \( l \parallel m \). — Reason: The question directly asks for this definition, so we state it first.
  2. Step 2: Pick out every key term that appears inside the definition of parallel lines: the words 'line', 'plane', and 'point' (hidden in the idea of two lines meeting or intersecting at a point). — Reason: A definition is only meaningful if every word used inside it is itself understood; we must trace which terms need to be clarified before the definition makes sense.
  3. Step 3: Attempt to define 'point': A point is a mark of position that has no dimension — no length, no breadth, no height. Attempt to define 'line': A line is a breadthless length that extends endlessly in both directions. Attempt to define 'plane': A plane is a perfectly flat surface that extends endlessly in all directions. — Reason: We try to give meaning to the three terms identified in Step 2, following the spirit of Euclid's own attempts.
  4. Step 4: Examine each attempted definition critically. The definition of 'point' uses the word 'dimension'; the definition of 'line' uses 'breadth' and 'length'; the definition of 'plane' uses 'flat' and 'surface'. Each of these words is itself undefined, creating an endless chain of definitions with no true starting point. — Reason: This analysis shows that no matter how we try, we cannot define these fundamental geometric ideas using simpler, already-known words.
  5. Step 5: Conclude that because the chain of definitions never ends, geometry must choose a starting point. In modern (Euclidean) geometry, 'point', 'line', and 'plane' are therefore accepted as undefined (basic) terms. We build only an intuitive picture of them rather than a formal definition. — Reason: Every logical system needs a foundation of terms that are simply accepted without proof or definition; these three geometric ideas serve as that foundation.

Final Answer

Parallel lines are two lines lying in the same plane that never intersect however far they are produced, written \( l \parallel m \). To state this definition, the terms 'point', 'line' and 'plane' must be understood first. A point can be thought of as a mark of position with no dimension, a line as a breadthless length extending endlessly both ways, and a plane as a flat surface extending endlessly. However, these attempted definitions use other undefined words, so in geometry point, line and plane are finally taken as undefined (basic) terms.

Common Mistake

One common mistake: Students often think that because we can draw or visualise a point, line, or plane, they must have precise mathematical definitions — but in formal geometry these three terms are intentionally left undefined to avoid an endless loop of definitions.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Definition: Two lines in the same plane that never meet, however far extended, are parallel lines, written \( l \parallel m \).
  2. Step 2: Terms used in this definition — 'point', 'line', 'plane' — must themselves be defined first.
  3. Step 3: Attempted definitions: point (no dimension), line (breadthless length, infinite extent), plane (flat surface, infinite extent) — each uses further undefined words, so all three are accepted as undefined (basic) terms in geometry.

Answer: Parallel lines are two lines lying in the same plane that never intersect however far they are produced, written \( l \parallel m \). To state this definition, the terms 'point', 'line' and 'plane' must be understood first. A point can be thought of as a mark of position with no dimension, a line as a breadthless length extending endlessly both ways, and a plane as a flat surface extending endlessly. However, these attempted definitions use other undefined words, so in geometry point, line and plane are finally taken as undefined (basic) terms.

➕ More Examples

More Examples

Example 1

Question: Give a precise definition for the term 'perpendicular lines.' Identify the terms that need to be defined before this definition can be stated. How would you define those prerequisite terms?

Solution: To define perpendicular lines, we must first identify the terms that the definition depends on. Prerequisite terms and their definitions: 1. Point — A point is a precise location in space. It has no length, width, or thickness. It is represented by a dot and named by a capital letter. (This is actually a primitive/undefined term in Euclid's geometry.) 2. Line — A line is made up of infinitely many points extending endlessly in both directions. It has length but no width or thickness. A line passing through two points A and B is denoted \( \overleftrightarrow{AB} \). (Also a primitive/undefined term in Euclid's geometry.) 3. Angle — When two rays originate from the same point (called the vertex), the figure formed is called an angle. The angle formed by two rays \( \overrightarrow{OA} \) and \( \overrightarrow{OB} \) is written as \( \angle AOB \). 4. Right angle — An angle whose measure is exactly \( 90^\circ \) is called a right angle. Definition of Perpendicular Lines: Two lines are said to be perpendicular to each other if they intersect at a point and the angle formed at their intersection is exactly \( 90^\circ \). If line \( l \) is perpendicular to line \( m \), we write \( l \perp m \). Summary of the dependency chain: To define perpendicular lines, we need the notion of a right angle. To define a right angle, we need the notion of an angle. To define an angle, we need rays, which in turn depend on points and lines. Points and lines are themselves primitive (undefined) terms that are accepted without formal definition.

Answer: Perpendicular lines are two lines that intersect at a point forming a \( 90^\circ \) angle. Prerequisite terms needed first: point (undefined/primitive), line (undefined/primitive), angle (two rays from a common vertex), and right angle (an angle measuring \( 90^\circ \)).

Example 2

Question: Give a precise definition for the term 'line segment.' State clearly which other geometric terms must be defined before this definition makes sense, and provide brief definitions for each of those terms.

Solution: To define a line segment, we trace back the chain of definitions it depends on. Prerequisite terms and their definitions: 1. Point — A point marks an exact location. It has no dimensions (no length, width, or thickness). It is a primitive or undefined term in Euclid's geometry — its existence is simply assumed. 2. Line — A line is a straight, endless path passing through at least two points, extending infinitely in both directions. It has no endpoints. A line through points P and Q is written \( \overleftrightarrow{PQ} \). This is also a primitive/undefined term. 3. Between (betweenness) — A point B is said to lie between points A and C (all on the same line) if A, B, and C are distinct collinear points and the distance from A to C equals the sum of distances from A to B and from B to C, i.e., \( AC = AB + BC \). Definition of a Line Segment: A line segment is the part of a line that consists of two distinct points, called endpoints, and all the points that lie between them on that line. The line segment with endpoints A and B is denoted \( \overline{AB} \). Its length is the distance between A and B. Summary: The definition of a line segment depends on the concepts of a point and a line (both primitive terms), and the idea of 'betweenness' of points on a line. Without first establishing what a point and a line are, the definition of a line segment cannot be stated meaningfully.

Answer: A line segment \( \overline{AB} \) consists of two endpoint points A and B and all points between them on a line. Prerequisite terms needed first: point (undefined/primitive), line (undefined/primitive), and betweenness (point B lies between A and C when \( AB + BC = AC \)).

🎯 Try a Similar Question

Try a Similar Question

Question: Give a precise definition of a 'line segment'. Identify the terms that must be understood before this definition can be stated. Discuss whether those prior terms can themselves be completely defined, or whether they must be accepted as undefined (primitive) terms in Euclidean geometry.

Solution

  1. Step 1: State the definition of a line segment: A line segment is the part of a line that lies between two fixed points on that line, including both endpoints. If the two endpoints are labelled A and B, the line segment is written as \( \overline{AB} \), and its length is a finite, measurable distance.
  2. Step 2: Identify the prior terms needed: To state the definition of a line segment, the following terms must already be understood: (i) 'point' — the two fixed endpoints A and B, (ii) 'line' — the straight path on which the segment lies, and (iii) 'distance' or 'length' — the measure between the two points. Without knowing what a 'point' and a 'line' are, the definition of a line segment cannot be properly understood.
  3. Step 3: Attempt to define 'point' and 'line': Following Euclid, we may try: A point is that which has no part (no dimension — no length, breadth, or height). A line is a breadthless length, extending in both directions without end. However, notice that each of these attempted definitions uses words (such as 'breadth', 'length', 'direction', 'extends') that are themselves not formally defined — creating a circular dependency.
  4. Step 4: Conclude on undefined (primitive) terms: Because every attempt to define 'point' and 'line' leads to the use of other undefined words, modern geometry — following Euclid's approach — treats 'point', 'line', and 'plane' as undefined (primitive) terms. Their meaning is conveyed intuitively: a point marks a position with no size, and a line is a straight, endless, one-dimensional figure. These undefined terms then serve as the foundation upon which all other geometric definitions, including that of a line segment, are built.

Answer: A line segment \( \overline{AB} \) is the part of a line lying between two fixed points A and B, including both endpoints. To define it, the terms 'point' and 'line' must be understood first. A point can be described as a mark of position having no dimension, and a line as a breadthless length extending endlessly in both directions. However, because these descriptions themselves rely on further undefined words, 'point', 'line', and 'plane' are ultimately accepted as undefined (primitive) terms in Euclidean geometry, forming the foundation for all other definitions.

Everything you get with Solver7

More questions in Introduction To Euclids Geometry