SOLVER7 Study. Nothing Else.
2026 Board Paper Q38(ii)

A skilled carpenter decided to craft a special rolling pin for the local baker. He carefully joined three cylindrical pieces of wood - two small ones on the ends and one larger in the centre to create a perfect tool. The baker loved the rolling pin, as it rolled out the smoothest dough for breads and pastries. The length of the bigger cylindrical part is 12 cm and diameter is 7 cm and the length of each smaller cylindrical part is 5 cm and diameter is 2·1 cm. Based on the above information, answer the following questions : Find the curved surface area of the bigger cylindrical part.

CBSE Class 10 Maths · Surface Areas And Volumes

Solution

👶 Simple Explanation

Simple Explanation

Imagine a rolling pin used in a kitchen. The big middle part is shaped like a can or a drum. We want to know how much paper would be needed to wrap around just the curved outer side of that drum. The drum is 7 cm wide and 12 cm long. When we multiply the width around the outside by the length, we get the area of that curved wrapper. For this rolling pin, that curved wrapping area turns out to be 264 square centimetres.

Answer: The curved surface area of the bigger cylindrical part is \( 264 \text{ cm}^2 \).

📖 Curved Surface Area of the Bigger Cylinder

Detailed Explanation

A rolling pin here is made of three cylinders joined end to end. To find how much surface a cylinder shows on its curved side (not the two circular ends), we use the curved surface area (CSA) formula. The CSA of a cylinder depends on its radius and its height (length). From the figure, the bigger central cylinder has diameter 7 cm, so its radius is half of 7, and its length (height) is 12 cm. We simply substitute these values into the CSA formula.

Formula Used

\[ \text{CSA of a cylinder} = 2\pi r h \]

Solution

  1. Step 1: Identify the dimensions: From the figure, the bigger cylinder has diameter \( d = 7 \) cm and length (height) \( h = 12 \) cm. So the radius is \[ r = \frac{d}{2} = \frac{7}{2} \text{ cm} \]
  2. Step 2: Write the formula: The curved surface area of a cylinder is given by \[ \text{CSA} = 2\pi r h \] This measures only the side (curved) surface, not the top and bottom circles.
  3. Step 3: Substitute the values: Taking \( \pi = \frac{22}{7} \), we get \[ \text{CSA} = 2 \times \frac{22}{7} \times \frac{7}{2} \times 12 \]
  4. Step 4: Simplify: The 7 in the denominator cancels with the 7 in the numerator, and the 2 cancels with the 2. This gives \[ \text{CSA} = 22 \times 12 = 264 \text{ cm}^2 \]

Final Answer

The curved surface area of the bigger cylindrical part is \( 264 \text{ cm}^2 \).

Common Mistake

A common mistake is using the diameter (7 cm) directly in the formula instead of the radius (3.5 cm). Always remember to divide the diameter by 2 before substituting it into \( 2\pi r h \).

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Read the dimensions of the bigger cylinder from the figure: diameter \( d = 7 \) cm and length \( h = 12 \) cm. — Reason: Before applying any formula, we must clearly identify which measurements belong to the bigger cylindrical part, so we do not accidentally use values from the smaller cylinders.
  2. Step 2: Convert the diameter to radius: \[ r = \frac{d}{2} = \frac{7}{2} \text{ cm} \] — Reason: The CSA formula requires the radius, not the diameter. Dividing the diameter by 2 gives us the correct value to substitute.
  3. Step 3: Write down the CSA formula: \[ \text{CSA} = 2\pi r h \] — Reason: This formula gives only the side surface of the cylinder. Since the problem asks for the curved surface area, we do not include the areas of the circular ends.
  4. Step 4: Substitute \( r = \frac{7}{2} \) cm, \( h = 12 \) cm, and \( \pi = \frac{22}{7} \) into the formula: \[ \text{CSA} = 2 \times \frac{22}{7} \times \frac{7}{2} \times 12 \] — Reason: Plugging in the known values turns the general formula into a numerical expression that can be simplified.
  5. Step 5: Cancel common factors before multiplying: the 2 in the numerator cancels with the 2 in the denominator, and the 7 in the numerator cancels with the 7 in the denominator, leaving \[ \text{CSA} = 22 \times 12 \] — Reason: Cancelling first makes the arithmetic simpler and avoids working with large or fractional numbers.
  6. Step 6: Multiply the remaining numbers: \[ \text{CSA} = 264 \text{ cm}^2 \] — Reason: This gives the final numerical value of the curved surface area of the bigger cylindrical part.

Final Answer

The curved surface area of the bigger cylindrical part is \( 264 \text{ cm}^2 \).

Common Mistake

One common mistake: Students often use the diameter directly in the formula instead of first halving it to get the radius, which gives an answer that is twice the correct value.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given: diameter \( d = 7 \) cm, so \( r = \dfrac{7}{2} \) cm; height \( h = 12 \) cm
  2. Step 2: \[ \text{CSA} = 2 \times \frac{22}{7} \times \frac{7}{2} \times 12 \]
  3. Step 3: \[ \text{CSA} = 22 \times 12 = 264 \text{ cm}^2 \]

Answer: The curved surface area of the bigger cylindrical part is \( 264 \text{ cm}^2 \).

➕ More Examples

More Examples

Example 1

Question: A factory produces decorative lamp posts made by joining cylindrical sections. The central (bigger) cylindrical section has a length of 15 cm and a diameter of 14 cm. Find the curved surface area of this bigger cylindrical section.

Solution: Given: Length (height) of the bigger cylinder, \( h = 15 \) cm. Diameter of the bigger cylinder \( = 14 \) cm, so radius \( r = \frac{14}{2} = 7 \) cm. Using the formula for curved surface area of a cylinder: \[ \text{CSA} = 2\pi r h \] Substituting the values \( r = 7 \) cm, \( h = 15 \) cm, and \( \pi = \frac{22}{7} \): \[ \text{CSA} = 2 \times \frac{22}{7} \times 7 \times 15 \] Simplifying step by step: \[ \text{CSA} = 2 \times 22 \times 15 \] \[ \text{CSA} = 660 \text{ cm}^2 \]

Answer: Curved Surface Area of the bigger cylindrical section = \( 660 \text{ cm}^2 \)

Example 2

Question: A craftsman builds a wooden dumbbell by attaching two small cylinders on either end of a large central cylinder. The central cylinder has a diameter of 10.5 cm and a length of 20 cm. Find the curved surface area of the central cylindrical part.

Solution: Given: Length (height) of the central cylinder, \( h = 20 \) cm. Diameter of the central cylinder \( = 10.5 \) cm, so radius \( r = \frac{10.5}{2} = 5.25 \) cm. Using the formula for curved surface area of a cylinder: \[ \text{CSA} = 2\pi r h \] Substituting the values \( r = 5.25 \) cm, \( h = 20 \) cm, and \( \pi = \frac{22}{7} \): \[ \text{CSA} = 2 \times \frac{22}{7} \times 5.25 \times 20 \] Note that \( 5.25 = \frac{21}{4} \), so: \[ \text{CSA} = 2 \times \frac{22}{7} \times \frac{21}{4} \times 20 \] \[ \text{CSA} = 2 \times \frac{22 \times 21}{7 \times 4} \times 20 \] \[ \text{CSA} = 2 \times \frac{22 \times 3}{4} \times 20 \] \[ \text{CSA} = 2 \times \frac{66}{4} \times 20 \] \[ \text{CSA} = 2 \times 16.5 \times 20 \] \[ \text{CSA} = 660 \text{ cm}^2 \]

Answer: Curved Surface Area of the central cylindrical part = \( 660 \text{ cm}^2 \)

🎯 Try a Similar Question

Try a Similar Question

Question: A craftsman built a decorative lamp stand by joining three cylindrical wooden pieces — one large cylinder in the middle and two smaller ones at the ends. The larger central cylindrical part has a length of 15 cm and a diameter of 6 cm. The smaller cylindrical parts each have a length of 4 cm and a diameter of 3 cm. Find the curved surface area of the larger cylindrical part.

Solution

  1. Step 1: Identify the given values for the larger cylinder: Length (height) of the larger cylinder: \( h = 15 \) cm. Diameter of the larger cylinder: \( d = 6 \) cm, so the radius is \( r = \dfrac{6}{2} = 3 \) cm.
  2. Step 2: Write the formula for Curved Surface Area: The curved surface area of a cylinder is given by: \[ CSA = 2\pi r h \]
  3. Step 3: Substitute the values: Substituting \( r = 3 \) cm, \( h = 15 \) cm, and \( \pi = \dfrac{22}{7} \): \[ CSA = 2 \times \dfrac{22}{7} \times 3 \times 15 \]
  4. Step 4: Simplify the expression: \[ CSA = 2 \times \dfrac{22}{7} \times 45 \] \[ CSA = \dfrac{2 \times 22 \times 45}{7} \] \[ CSA = \dfrac{1980}{7} \] \[ CSA = 282.86 \text{ cm}^2 \text{ (approximately)} \]

Answer: The curved surface area of the larger cylindrical part is \( \dfrac{1980}{7} \approx 282.86 \text{ cm}^2 \).

Everything you get with Solver7

More questions in Surface Areas And Volumes

Chapter 12 Examples Q1 Chapter 12 Examples Q2 Chapter 12 Examples Q3 30/1/1 2022 / Section A Q2 430/1/1 2022 / Section A Q2 Chapter 12 Examples Q4 Chapter 12 Examples Q5 430/3/1 2022 / Section A Q4(a) Chapter 12 Examples Q6 430/3/1 2022 / Section A Q4(b) 430/4/1 2026 / Section A Q6 Chapter 12 Examples Q7 Exercise 12.1 Q1 430/2/1 2023 / Section A Q8 Exercise 12.1 Q2 30/5/1 2023 / Section A Q9 Exercise 12.1 Q3 30/2/1 2023 / Section A Q10 430/3/1 2024 / Section A Q10 Exercise 12.1 Q4 430/2/1 2023 / Section A Q11 Exercise 12.1 Q5 30/3/1 2026 / Section A Q12 CBSE-ADDL1 2024 / Section A Q12 Exercise 12.1 Q6 CBSE-ADDL1 2024 / Section A Q13 Exercise 12.1 Q7 30/1/1 2022 / Section C Q11(a) 430/1/1 2022 / Section C Q11(a) Exercise 12.1 Q8 30/1/1 2022 / Section C Q11(b) 430/1/1 2022 / Section C Q11(b) 430/1/1 2026 / Section A Q15 430/2/1 2026 / Section A Q15 430/3/1 2026 / Section A Q15 430/4/1 2026 / Section A Q15 CBSE-ADDL2 2024 / Section A Q15 Exercise 12.1 Q9 430/3/1 2024 / Section A Q16 Exercise 12.2 Q1 Exercise 12.2 Q2 Exercise 12.2 Q3 430/3/1 2022 / Section C Q14(a) Exercise 12.2 Q4 30/1/1 2026 / Section A Q20 430/3/1 2022 / Section C Q14(b) 430/5/1 2023 / Section A Q20 Exercise 12.2 Q5 BritishCouncil 2021 / Section A Q21 Exercise 12.2 Q6 Exercise 12.2 Q7 Exercise 12.2 Q8 BritishCouncil 2021 / Section A Q24 Competency Based - Case Study Q1 (i) BritishCouncil 2021 / Section A Q25 Competency Based - Case Study Q1 (ii) Competency Based - Case Study Q1 (iii) Competency Based - Case Study Q1 (iv) Competency Based - Case Study Q1 (v) Competency Based - Case Study Q2 (i)