SOLVER7 Study. Nothing Else.
2022 Board Paper Q14(b)

The technique of Rainwater harvesting through Recharge pit is very useful. Rainwater is collected on the roof and then flowing through the Recharge pit it goes to the ground. Observe the picture given below : The surface area of the roof floor is \(100m^2.\) The cuboidal pit measures \( 3m\times 3m \times 2m.\) Instead of a cuboidal pit, if a cylindrical pit with diameter 3 m and height 2 m had been built, then which tank would hold more water ?

CBSE Class 10 Maths · Surface Areas And Volumes

Solution

👶 Simple Explanation

Simple Explanation

Imagine two holes dug in the ground to collect rainwater. One hole is a box shape and the other is a tube shape. Both holes are the same depth. The box-shaped hole is wider inside, so it can hold more water. We can check this by counting how much space is inside each hole. The box hole holds 18 big cubes of water. The tube hole holds about 14 big cubes of water. So the box-shaped pit wins — it stores almost 4 extra cubes more water than the tube-shaped pit.

Answer: The cuboidal pit holds more water. Volume of cuboidal pit \( = 18 \text{ m}^3 \), volume of cylindrical pit \( \approx 14.14 \text{ m}^3 \). Difference \( \approx 3.86 \text{ m}^3 \).

📖 Rainwater Harvesting: Cuboidal vs Cylindrical Recharge Pit

Detailed Explanation

To compare how much water each pit can hold, we need to compare their volumes. The pit that has the greater volume will hold more water. A cuboid has volume equal to length x breadth x height, while a cylinder has volume equal to \( \pi r^2 h \), where r is the radius of the circular base and h is the height. In this question, both pits have the same depth (2 m), so we only need to carefully compute the base areas and multiply by the height.

Formula Used

Volume of cuboid \( = l \times b \times h \) and Volume of cylinder \( = \pi r^2 h \)

Solution

  1. Step 1: Volume of the cuboidal pit: The cuboidal pit has length \( l = 3 \) m, breadth \( b = 3 \) m and depth \( h = 2 \) m. \[ V_{cuboid} = l \times b \times h = 3 \times 3 \times 2 = 18 \text{ m}^3 \]
  2. Step 2: Find the radius of the cylindrical pit: The diameter of the cylindrical pit is 3 m, so its radius is \[ r = \frac{3}{2} = 1.5 \text{ m} \] and its height is \( h = 2 \) m.
  3. Step 3: Volume of the cylindrical pit: Using \( \pi = \frac{22}{7} \): \[ V_{cyl} = \pi r^2 h = \frac{22}{7} \times (1.5)^2 \times 2 \] \[ V_{cyl} = \frac{22}{7} \times 2.25 \times 2 = \frac{22}{7} \times 4.5 \] \[ V_{cyl} = \frac{99}{7} \approx 14.14 \text{ m}^3 \]
  4. Step 4: Compare the two volumes: We have \( V_{cuboid} = 18 \text{ m}^3 \) and \( V_{cyl} \approx 14.14 \text{ m}^3 \). Since \( 18 > 14.14 \), the cuboidal pit holds more water than the cylindrical pit.

Final Answer

The cuboidal pit holds more water. Volume of cuboidal pit \( = 18 \text{ m}^3 \), volume of cylindrical pit \( \approx 14.14 \text{ m}^3 \). Difference \( \approx 3.86 \text{ m}^3 \).

Common Mistake

A common mistake is to use the diameter (3 m) directly as the radius in the cylinder volume formula. Always remember to divide the diameter by 2 to get the radius before squaring it in \( \pi r^2 h \).

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Write down the dimensions of the cuboidal pit. Length \( l = 3 \) m, breadth \( b = 3 \) m, and depth \( h = 2 \) m. — Reason: Identifying known values first avoids confusion when substituting into the formula.
  2. Step 2: Calculate the volume of the cuboidal pit by multiplying length, breadth, and depth: \[ V_{\text{cuboid}} = 3 \times 3 \times 2 = 18 \text{ m}^3 \] — Reason: The formula for the volume of a cuboid is \( l \times b \times h \), so we substitute directly.
  3. Step 3: Find the radius of the cylindrical pit. The diameter is given as 3 m, so the radius is \[ r = \frac{3}{2} = 1.5 \text{ m} \] The depth is \( h = 2 \) m. — Reason: The cylinder formula needs the radius, not the diameter, so we must halve the given diameter.
  4. Step 4: Square the radius: \( r^2 = (1.5)^2 = 2.25 \). Then multiply by \( h \): \( 2.25 \times 2 = 4.5 \). — Reason: Breaking the calculation into smaller parts reduces arithmetic errors.
  5. Step 5: Substitute into the cylinder volume formula using \( \pi = \frac{22}{7} \): \[ V_{\text{cylinder}} = \frac{22}{7} \times 4.5 = \frac{99}{7} \approx 14.14 \text{ m}^3 \] — Reason: Multiplying \( \pi r^2 h \) gives the full volume of the cylindrical pit.
  6. Step 6: Compare the two volumes: \( V_{\text{cuboid}} = 18 \text{ m}^3 \) and \( V_{\text{cylinder}} \approx 14.14 \text{ m}^3 \). Since \( 18 > 14.14 \), the cuboidal pit holds more water. The difference is \[ 18 - 14.14 = 3.86 \text{ m}^3 \] — Reason: Subtracting the smaller volume from the larger tells us by exactly how much one pit exceeds the other.

Final Answer

The cuboidal pit holds more water. Volume of cuboidal pit \( = 18 \text{ m}^3 \), volume of cylindrical pit \( \approx 14.14 \text{ m}^3 \). Difference \( \approx 3.86 \text{ m}^3 \).

Common Mistake

One common mistake: Using the diameter (3 m) directly in place of the radius in the formula \( \pi r^2 h \). Always halve the diameter to get \( r = 1.5 \) m before squaring.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Cuboidal pit: \( l = 3 \) m, \( b = 3 \) m, \( h = 2 \) m. \[V_{cuboid} = 3 \times 3 \times 2 = 18 \text{ m}^3\]
  2. Step 2: Cylindrical pit: diameter \( = 3 \) m, so \( r = 1.5 \) m, \( h = 2 \) m. \[V_{cyl} = \frac{22}{7} \times (1.5)^2 \times 2 = \frac{22}{7} \times 4.5 = \frac{99}{7} \approx 14.14 \text{ m}^3\]
  3. Step 3: Difference: \( 18 - 14.14 \approx 3.86 \text{ m}^3 \). Since \( 18 > 14.14 \), the cuboidal pit holds more water.

Answer: The cuboidal pit holds more water. Volume of cuboidal pit \( = 18 \text{ m}^3 \), volume of cylindrical pit \( \approx 14.14 \text{ m}^3 \). Difference \( \approx 3.86 \text{ m}^3 \).

➕ More Examples

More Examples

Example 1

Question: A school constructs a water storage pit for rainwater harvesting. Option A is a cuboidal pit measuring 4 m × 4 m × 3 m. Option B is a cylindrical pit with diameter 4 m and height 3 m. Which pit can hold more water, and by how much? (Use \(\pi = 3.14\))

Solution: Step 1: Find the volume of the cuboidal pit.
The dimensions are length = 4 m, breadth = 4 m, height = 3 m. \[V_{\text{cuboid}} = l \times b \times h = 4 \times 4 \times 3\] \[V_{\text{cuboid}} = 48 \text{ m}^3\]
Step 2: Find the volume of the cylindrical pit.
Diameter = 4 m, so radius = \(\frac{4}{2} = 2\) m, height = 3 m. \[V_{\text{cylinder}} = \pi r^2 h = 3.14 \times (2)^2 \times 3\] \[V_{\text{cylinder}} = 3.14 \times 4 \times 3 = 3.14 \times 12\] \[V_{\text{cylinder}} = 37.68 \text{ m}^3\]
Step 3: Compare the two volumes.
Since \(48 \text{ m}^3 > 37.68 \text{ m}^3\), the cuboidal pit holds more water.
Difference = \(48 - 37.68 = 10.32 \text{ m}^3\)
Therefore, the cuboidal pit holds more water by \(10.32 \text{ m}^3\).

Answer: The cuboidal pit holds more water by \(10.32 \text{ m}^3\).

Example 2

Question: A housing society plans to build an underground tank for water storage. Plan 1 is a cuboidal tank with dimensions 5 m × 5 m × 4 m. Plan 2 is a cylindrical tank with diameter 5 m and height 4 m. Which tank has greater capacity? By how many cubic metres? (Use \(\pi = \frac{22}{7}\))

Solution: Step 1: Find the volume of the cuboidal tank.
Length = 5 m, breadth = 5 m, height = 4 m. \[V_{\text{cuboid}} = l \times b \times h = 5 \times 5 \times 4\] \[V_{\text{cuboid}} = 100 \text{ m}^3\]
Step 2: Find the volume of the cylindrical tank.
Diameter = 5 m, so radius = \(\frac{5}{2} = 2.5\) m, height = 4 m. \[V_{\text{cylinder}} = \pi r^2 h = \frac{22}{7} \times (2.5)^2 \times 4\] \[V_{\text{cylinder}} = \frac{22}{7} \times 6.25 \times 4 = \frac{22}{7} \times 25\] \[V_{\text{cylinder}} = \frac{550}{7} \approx 78.57 \text{ m}^3\]
Step 3: Compare the two volumes.
Since \(100 \text{ m}^3 > 78.57 \text{ m}^3\), the cuboidal tank has greater capacity.
Difference = \(100 - 78.57 = 21.43 \text{ m}^3\)
Therefore, the cuboidal tank holds more water, by approximately \(21.43 \text{ m}^3\).

Answer: The cuboidal tank has greater capacity by approximately \(21.43 \text{ m}^3\).

🎯 Try a Similar Question

Try a Similar Question

Question: A school is constructing a water storage tank for harvesting rainwater from its terrace. They have two design options: a cuboidal tank measuring 4 m × 4 m × 3 m, or a cylindrical tank with diameter 4 m and height 3 m. Which tank can hold more water, and by how much? (Use \( \pi = 3.14 \))

Solution

  1. Step 1: Find the Volume of the Cuboidal Tank: Given: length = 4 m, breadth = 4 m, height = 3 m. Volume of cuboid = l \( \times \) b \( \times \) h \[ V_{\text{cuboid}} = 4 \times 4 \times 3 = 48 \text{ m}^3 \]
  2. Step 2: Find the Radius of the Cylindrical Tank: Given: diameter = 4 m, so radius \( r = \dfrac{4}{2} = 2 \) m.
  3. Step 3: Find the Volume of the Cylindrical Tank: Given: r = 2 m, height h = 3 m, \( \pi = 3.14 \). \[ V_{\text{cylinder}} = \pi r^2 h = 3.14 \times 2^2 \times 3 \] \[ = 3.14 \times 4 \times 3 = 3.14 \times 12 = 37.68 \text{ m}^3 \]
  4. Step 4: Compare the Two Volumes: Volume of cuboidal tank = 48 m³ and Volume of cylindrical tank = 37.68 m³. Since \( 48 > 37.68 \), the cuboidal tank holds more water.
  5. Step 5: Find the Difference: Difference = \( 48 - 37.68 = 10.32 \) m³. So the cuboidal tank holds 10.32 m³ more water than the cylindrical tank.

Answer: The cuboidal tank holds more water. Volume of cuboidal tank \( = 48 \text{ m}^3 \), volume of cylindrical tank \( = 37.68 \text{ m}^3 \). The cuboidal tank holds \( 10.32 \text{ m}^3 \) more water.

Everything you get with Solver7

More questions in Surface Areas And Volumes

Chapter 12 Examples Q1 Chapter 12 Examples Q2 Chapter 12 Examples Q3 30/1/1 2022 / Section A Q2 430/1/1 2022 / Section A Q2 Chapter 12 Examples Q4 Chapter 12 Examples Q5 430/3/1 2022 / Section A Q4(a) Chapter 12 Examples Q6 430/3/1 2022 / Section A Q4(b) 430/4/1 2026 / Section A Q6 Chapter 12 Examples Q7 Exercise 12.1 Q1 430/2/1 2023 / Section A Q8 Exercise 12.1 Q2 30/5/1 2023 / Section A Q9 Exercise 12.1 Q3 30/2/1 2023 / Section A Q10 430/3/1 2024 / Section A Q10 Exercise 12.1 Q4 430/2/1 2023 / Section A Q11 Exercise 12.1 Q5 30/3/1 2026 / Section A Q12 CBSE-ADDL1 2024 / Section A Q12 Exercise 12.1 Q6 CBSE-ADDL1 2024 / Section A Q13 Exercise 12.1 Q7 30/1/1 2022 / Section C Q11(a) 430/1/1 2022 / Section C Q11(a) Exercise 12.1 Q8 30/1/1 2022 / Section C Q11(b) 430/1/1 2022 / Section C Q11(b) 430/1/1 2026 / Section A Q15 430/2/1 2026 / Section A Q15 430/3/1 2026 / Section A Q15 430/4/1 2026 / Section A Q15 CBSE-ADDL2 2024 / Section A Q15 Exercise 12.1 Q9 430/3/1 2024 / Section A Q16 Exercise 12.2 Q1 Exercise 12.2 Q2 Exercise 12.2 Q3 430/3/1 2022 / Section C Q14(a) Exercise 12.2 Q4 30/1/1 2026 / Section A Q20 430/5/1 2023 / Section A Q20 Exercise 12.2 Q5 BritishCouncil 2021 / Section A Q21 Exercise 12.2 Q6 Exercise 12.2 Q7 Exercise 12.2 Q8 BritishCouncil 2021 / Section A Q24 Competency Based - Case Study Q1 (i) BritishCouncil 2021 / Section A Q25 Competency Based - Case Study Q1 (ii) Competency Based - Case Study Q1 (iii) Competency Based - Case Study Q1 (iv) Competency Based - Case Study Q1 (v) Competency Based - Case Study Q2 (i) 430/3/1 2024 / Section C Q28(a)