SOLVER7 Study. Nothing Else.
Exercise 12.1 Q9

A wooden article was made by scooping out a hemisphere from each end of a solid cylinder, as shown in Fig. 12.11. If the height of the cylinder is 10 cm, and its base is of radius 3.5 cm, find the total surface area of the article.

CBSE Class 10 Maths · Surface Areas And Volumes

Solution

👶 Simple Explanation

Simple Explanation

Imagine a chocolate bar shaped like a tube. Now picture someone scooping out a small bowl from each end, like pressing a spoon into clay. The outside of the tube is still there, but the flat ends are gone. Instead, two curved bowl-shaped hollows take their place. To find how much surface the whole thing has, we add the outside of the tube to the insides of both little bowls. All three curved parts together give us 374 square centimetres.

Answer: The total surface area of the article is \(374 \text{ cm}^2\).

📖 Surface Area of a Wooden Article (Cylinder with Hemispheres Scooped Out)

Detailed Explanation

Look carefully at the figure. We begin with a solid cylinder and then scoop out a hemisphere from each end. This creates two bowl-shaped (hemispherical) hollows.

Because the flat circular faces of the cylinder are carved away, they are no longer part of the surface. They are replaced by the inner curved surfaces of the two hemispheres. So the total surface of this article has only:

  • The curved (side) surface of the cylinder
  • The curved surface of the top scooped hemisphere
  • The curved surface of the bottom scooped hemisphere

Since the hemispheres are scooped from the cylinder's ends, their radius equals the cylinder's radius, \(r = 3.5 \text{ cm}\).

Formula Used

\[\text{TSA} = 2\pi r h + 2 \times 2\pi r^2\]

where \(2\pi r h\) is the curved surface area of the cylinder and \(2\pi r^2\) is the curved surface area of one hemisphere.

Solution

  1. Given: \(r = 3.5 = \dfrac{7}{2} \text{ cm}\), \(h = 10 \text{ cm}\), \(\pi = \dfrac{22}{7}\).
  2. Curved surface area of cylinder: \[2\pi r h = 2 \times \dfrac{22}{7} \times \dfrac{7}{2} \times 10 = 220 \text{ cm}^2\]
  3. Curved surface area of both hemispheres: \[2 \times 2\pi r^2 = 4 \times \dfrac{22}{7} \times \dfrac{7}{2} \times \dfrac{7}{2} = 154 \text{ cm}^2\]
  4. Add the two parts: \[\text{TSA} = 220 + 154 = 374 \text{ cm}^2\]

Final Answer

The total surface area of the wooden article is \(\mathbf{374 \text{ cm}^2}\).

Common Mistake

Many students mistakenly add the flat circular ends of the cylinder. But since the hemispheres are scooped out of these ends, the flat faces vanish and are replaced by the curved hemispherical surfaces. Always use the curved surface area \(2\pi r^2\) for each hemisphere, never the flat circle area.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Write down the given measurements: radius of cylinder (and hemisphere) \( r = 3.5 \text{ cm} = \dfrac{7}{2} \text{ cm} \), height of cylinder \( h = 10 \text{ cm} \). — Reason: Identifying given values first prevents errors during substitution and confirms that the hemisphere radius matches the cylinder's base radius.
  2. Step 2: Recognise which surfaces form the outer boundary of the article. The two flat circular ends of the cylinder are carved away, so they contribute nothing. What remains exposed is: (i) the curved lateral surface of the cylinder, and (ii) the curved (inner bowl) surface of each of the two hemispherical scoops. — Reason: Understanding the geometry ensures we neither add the missing flat circles nor forget the hemispherical curved surfaces.
  3. Step 3: Set up the expression for Total Surface Area by combining the three visible surfaces: \[ \text{TSA} = 2\pi r h + 2 \times 2\pi r^2 \] — Reason: The formula directly follows from Step 2 — one curved cylinder surface plus two hemispherical curved surfaces.
  4. Step 4: Calculate the Curved Surface Area (CSA) of the cylinder using \( \pi = \dfrac{22}{7} \): \[ \text{CSA of cylinder} = 2 \times \frac{22}{7} \times \frac{7}{2} \times 10 \] The \( 2 \) and \( \frac{1}{2} \) cancel, and \( \frac{22}{7} \times 7 = 22 \), giving \[ \text{CSA of cylinder} = 22 \times 10 = 220 \text{ cm}^2 \] — Reason: Simplifying fractions before multiplying reduces arithmetic errors.
  5. Step 5: Calculate the combined Curved Surface Area of both hemispheres: \[ 2 \times 2\pi r^2 = 4\pi r^2 = 4 \times \frac{22}{7} \times \frac{7}{2} \times \frac{7}{2} \] Simplify step by step: \( 4 \times \frac{22}{7} \times \frac{7}{2} = 4 \times 11 = 44 \), then \( 44 \times \frac{7}{2} = 22 \times 7 = 154 \text{ cm}^2 \). — Reason: Breaking the multiplication into smaller parts keeps the cancellation of 7s and 2s clear and manageable.
  6. Step 6: Add the two partial results to get the Total Surface Area: \[ \text{TSA} = 220 + 154 = 374 \text{ cm}^2 \] — Reason: The final addition combines the cylinder's contribution with the two hemispherical scoops to give the complete outer surface area of the article.

Final Answer

The total surface area of the article is \( 374 \text{ cm}^2 \).

Common Mistake

One common mistake: Students often add the areas of the two flat circular ends (i.e., include \( 2\pi r^2 \) for the circles) even though those ends have been carved away — remember, once a hemisphere is scooped out, the flat circle is gone and must NOT be counted.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given: \( r = \frac{7}{2} \text{ cm} \), \( h = 10 \text{ cm} \), \( \pi = \frac{22}{7} \)
  2. Step 2: CSA of cylinder: \( 2 \times \frac{22}{7} \times \frac{7}{2} \times 10 = 220 \text{ cm}^2 \)
  3. Step 3: CSA of two hemispheres: \( 2 \times 2 \times \frac{22}{7} \times \frac{7}{2} \times \frac{7}{2} = 154 \text{ cm}^2 \)
  4. Step 4: TSA \( = 220 + 154 = 374 \text{ cm}^2 \)

Answer: The total surface area of the article is \( 374 \text{ cm}^2 \).

➕ More Examples

More Examples

Example 1

Question: A decorative wooden piece is made by scooping out a hemisphere from each end of a solid cylinder. The height of the cylinder is 14 cm and its base radius is 4.2 cm. Find the total surface area of the article. (Use \( \pi = \dfrac{22}{7} \))

Solution: Given: height of cylinder \( h = 14 \) cm, radius \( r = 4.2 \) cm. Since a hemisphere is scooped out from each end, the flat circular ends are replaced by the curved surfaces of the hemispheres. Step 1: Curved Surface Area (CSA) of the cylinder. \[ \text{CSA}_{\text{cylinder}} = 2\pi r h \] Substituting the values: \[ = 2 \times \frac{22}{7} \times 4.2 \times 14 \] Simplifying step by step: \[ = 2 \times \frac{22}{7} \times 58.8 \] \[ = 2 \times 22 \times 8.4 \] \[ = 369.6 \text{ cm}^2 \] Step 2: CSA of two hemispheres (combined). \[ \text{CSA}_{\text{two hemispheres}} = 2 \times 2\pi r^2 = 4\pi r^2 \] Substituting: \[ = 4 \times \frac{22}{7} \times (4.2)^2 \] \[ = 4 \times \frac{22}{7} \times 17.64 \] \[ = \frac{4 \times 22 \times 17.64}{7} \] \[ = \frac{1552.32}{7} \] \[ = 221.76 \text{ cm}^2 \] Step 3: Total Surface Area. \[ \text{Total SA} = 369.6 + 221.76 \] \[ = 591.36 \text{ cm}^2 \]

Answer: Total Surface Area = \( 591.36 \text{ cm}^2 \)

Example 2

Question: A metal trophy stand is crafted by hollowing out a hemisphere from both ends of a solid cylinder of height 20 cm and base radius 7 cm. Find the total surface area of the resulting article. (Use \( \pi = \dfrac{22}{7} \))

Solution: Given: height of cylinder \( h = 20 \) cm, radius \( r = 7 \) cm. The flat circular ends are removed and replaced by the concave curved surfaces of the hemispheres. Step 1: Curved Surface Area of the cylinder. \[ \text{CSA}_{\text{cylinder}} = 2\pi r h \] Substituting: \[ = 2 \times \frac{22}{7} \times 7 \times 20 \] \[ = 2 \times 22 \times 20 \] \[ = 880 \text{ cm}^2 \] Step 2: Combined CSA of two hemispheres. \[ \text{CSA}_{\text{two hemispheres}} = 4\pi r^2 \] Substituting: \[ = 4 \times \frac{22}{7} \times 7^2 \] \[ = 4 \times \frac{22}{7} \times 49 \] \[ = 4 \times 22 \times 7 \] \[ = 616 \text{ cm}^2 \] Step 3: Total Surface Area. \[ \text{Total SA} = 880 + 616 \] \[ = 1496 \text{ cm}^2 \]

Answer: Total Surface Area = \( 1496 \text{ cm}^2 \)

🎯 Try a Similar Question

Try a Similar Question

Question: A decorative wooden piece is made by scooping out a hemisphere from each end of a solid cylinder. The height of the cylinder is 14 cm and its base has a radius of 3 cm. Find the total surface area of the article. (Use \( \pi = \frac{22}{7} \))

Solution

  1. Step 1: Identify what surfaces are visible: When a hemisphere is scooped out from each end of the cylinder, the flat circular ends of the cylinder are removed entirely. The visible surfaces are: 1. The curved surface area (CSA) of the cylinder. 2. The curved surface area of the two hemispheres (one from each end). Note: The flat circular faces are NOT included.
  2. Step 2: Write down the given values: Height of cylinder: \( h = 14 \) cm Radius of cylinder and hemisphere: \( r = 3 \) cm We use \( \pi = \dfrac{22}{7} \)
  3. Step 3: Calculate the Curved Surface Area of the cylinder: The curved surface area of the cylinder is given by \( 2\pi r h \). Substituting the values: \[ \text{CSA of cylinder} = 2 \times \frac{22}{7} \times 3 \times 14 \] \[ = 2 \times \frac{22}{7} \times 42 \] \[ = 2 \times 22 \times 6 \] \[ = 264 \text{ cm}^2 \]
  4. Step 4: Calculate the Curved Surface Area of both hemispheres: The curved surface area of one hemisphere is \( 2\pi r^2 \). For two hemispheres: \[ \text{CSA of 2 hemispheres} = 2 \times 2\pi r^2 = 4\pi r^2 \] Substituting the values: \[ = 4 \times \frac{22}{7} \times 3^2 \] \[ = 4 \times \frac{22}{7} \times 9 \] \[ = \frac{4 \times 22 \times 9}{7} \] \[ = \frac{792}{7} \] \[ = 113.14 \text{ cm}^2 \text{ (approximately)} \]
  5. Step 5: Calculate the Total Surface Area: Total Surface Area = CSA of cylinder + CSA of 2 hemispheres \[ = 264 + \frac{792}{7} \] \[ = \frac{264 \times 7}{7} + \frac{792}{7} \] \[ = \frac{1848 + 792}{7} \] \[ = \frac{2640}{7} \] \[ \approx 377.14 \text{ cm}^2 \]

Answer: The total surface area of the article is \( \dfrac{2640}{7} \approx 377.14 \text{ cm}^2 \).

Everything you get with Solver7

More questions in Surface Areas And Volumes

Chapter 12 Examples Q1 Chapter 12 Examples Q2 Chapter 12 Examples Q3 30/1/1 2022 / Section A Q2 430/1/1 2022 / Section A Q2 Chapter 12 Examples Q4 Chapter 12 Examples Q5 430/3/1 2022 / Section A Q4(a) Chapter 12 Examples Q6 430/3/1 2022 / Section A Q4(b) 430/4/1 2026 / Section A Q6 Chapter 12 Examples Q7 Exercise 12.1 Q1 430/2/1 2023 / Section A Q8 Exercise 12.1 Q2 30/5/1 2023 / Section A Q9 Exercise 12.1 Q3 30/2/1 2023 / Section A Q10 430/3/1 2024 / Section A Q10 Exercise 12.1 Q4 430/2/1 2023 / Section A Q11 Exercise 12.1 Q5 30/3/1 2026 / Section A Q12 CBSE-ADDL1 2024 / Section A Q12 Exercise 12.1 Q6 CBSE-ADDL1 2024 / Section A Q13 Exercise 12.1 Q7 30/1/1 2022 / Section C Q11(a) 430/1/1 2022 / Section C Q11(a) Exercise 12.1 Q8 30/1/1 2022 / Section C Q11(b) 430/1/1 2022 / Section C Q11(b) 430/1/1 2026 / Section A Q15 430/2/1 2026 / Section A Q15 430/3/1 2026 / Section A Q15 430/4/1 2026 / Section A Q15 CBSE-ADDL2 2024 / Section A Q15 430/3/1 2024 / Section A Q16 Exercise 12.2 Q1 Exercise 12.2 Q2 Exercise 12.2 Q3 430/3/1 2022 / Section C Q14(a) Exercise 12.2 Q4 30/1/1 2026 / Section A Q20 430/3/1 2022 / Section C Q14(b) 430/5/1 2023 / Section A Q20 Exercise 12.2 Q5 BritishCouncil 2021 / Section A Q21 Exercise 12.2 Q6 Exercise 12.2 Q7 Exercise 12.2 Q8 BritishCouncil 2021 / Section A Q24 Competency Based - Case Study Q1 (i) BritishCouncil 2021 / Section A Q25 Competency Based - Case Study Q1 (ii) Competency Based - Case Study Q1 (iii) Competency Based - Case Study Q1 (iv) Competency Based - Case Study Q1 (v) Competency Based - Case Study Q2 (i) 430/3/1 2024 / Section C Q28(a)