SOLVER7 Study. Nothing Else.
2022 Board Paper Q14(a)

The technique of Rainwater harvesting through Recharge pit is very useful. Rainwater is collected on the roof and then flowing through the Recharge pit it goes to the ground. Observe the picture given below : The surface area of the roof floor is \(100m^2.\) The cuboidal pit measures \( 3m\times 3m \times 2m.\) Water standing on the roof is released into the cuboidal pit. If the cuboidal pit is filled completely by the roof water, then find the height of standing water on the roof.

CBSE Class 10 Maths · Surface Areas And Volumes

Solution

👶 Simple Explanation

Simple Explanation

Imagine rain fills up a giant flat tray on a rooftop. All that collected water gets poured into a big underground box called a recharge pit. The pit measures 3 m × 3 m × 2 m, so it holds exactly \( 18 \) cubic metres of water. The roof is \( 100 \) square metres wide. We ask: how deep was the water sitting on the roof? We divide \( 18 \) by \( 100 \) and get \( 0.18 \) metres. Same amount of water, just a different shape!

Answer: The height of standing water on the roof is \( 0.18 \, m \) (i.e., \( 18 \, cm \)).

📖 Rainwater Harvesting through Recharge Pit

Detailed Explanation

This problem is based on the concept of conservation of volume. When water flows from one container (the roof) into another (the recharge pit), the volume of water remains the same. The water on the roof forms a thin cuboidal layer whose base area equals the roof area and whose height is what we need to find. This total volume of water is exactly equal to the volume of the cuboidal pit that gets filled. So we equate the two volumes and solve for the unknown height.

Formula Used

Volume of a cuboid \( = \text{length} \times \text{breadth} \times \text{height} \). Also, Volume of water on roof \( = \text{Area of roof} \times \text{height of water} \).

Solution

  1. Step 1: Note the given information: Area of the roof \( = 100 \, m^2 \). Dimensions of the cuboidal recharge pit are length \( = 3 \, m \), breadth \( = 3 \, m \) and depth \( = 2 \, m \). Let the height of water standing on the roof be \( h \) metres.
  2. Step 2: Find the volume of the recharge pit: Since the pit is a cuboid, \[ V_{pit} = 3 \times 3 \times 2 = 18 \, m^3 \] So the pit can hold \( 18 \, m^3 \) of water when completely filled.
  3. Step 3: Express the volume of water on the roof: The water on the roof also forms a cuboidal shape with base area \( 100 \, m^2 \) and height \( h \). \[ V_{roof} = 100 \times h \, m^3 \]
  4. Step 4: Apply the volume equality: All the water on the roof exactly fills the pit, so \[ V_{roof} = V_{pit} \] \[ 100 \times h = 18 \]
  5. Step 5: Solve for h: \[ h = \frac{18}{100} = 0.18 \, m \] Converting to centimetres: \[ h = 0.18 \times 100 = 18 \, cm \]

Final Answer

The height of standing water on the roof is \( 0.18 \, m \) (i.e., \( 18 \, cm \)).

Common Mistake

A common mistake is to forget that the water on the roof also has volume \( = \text{area} \times \text{height} \), and instead students multiply or divide the pit's dimensions incorrectly. Another frequent error is mixing units — for example, writing the final answer as 18 m instead of 0.18 m. Always keep units consistent and remember that volume of water is conserved when transferred from the roof to the pit.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: List all given information clearly. The area of the roof is \( 100 \, m^2 \). The recharge pit has length \( = 3 \, m \), breadth \( = 3 \, m \), and depth \( = 2 \, m \). Let the height of water standing on the roof be \( h \) metres. — Reason: Organising known values first prevents confusion later.
  2. Step 2: Calculate the volume of the cuboidal recharge pit using \( V = l \times b \times d \): \[ V_{\text{pit}} = 3 \times 3 \times 2 = 18 \, m^3 \] — Reason: This gives us the exact amount of water the pit holds when completely filled.
  3. Step 3: Write an expression for the volume of water lying on the roof. The water forms a thin cuboid whose base matches the roof area \( 100 \, m^2 \) and whose height is the unknown \( h \): \[ V_{\text{roof}} = 100 \times h \] — Reason: The roof surface acts as the base of this thin water layer, so area multiplied by height gives its volume.
  4. Step 4: Set the two volumes equal, since all the water from the roof exactly fills the pit: \[ V_{\text{roof}} = V_{\text{pit}} \] \[ 100 \times h = 18 \] — Reason: Conservation of volume means the water does not appear or disappear; the same volume moves from roof to pit.
  5. Step 5: Solve for \( h \) by dividing both sides by 100: \[ h = \frac{18}{100} = 0.18 \, m \] — Reason: Isolating \( h \) gives the required height of water on the roof.
  6. Step 6: Convert the answer to centimetres for clarity: \( 0.18 \, m = 18 \, cm \). — Reason: Expressing a small height in centimetres makes the answer easier to interpret physically.

Final Answer

The height of standing water on the roof is \( 0.18 \, m \) (i.e., \( 18 \, cm \)).

Common Mistake

One common mistake: Students sometimes use the perimeter or one dimension of the roof instead of its total base area (\( 100 \, m^2 \)) when writing the volume of water on the roof, leading to an incorrect value of \( h \).

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given: Roof area = \( 100 \, m^2 \), Pit dimensions: \( 3 \, m \times 3 \, m \times 2 \, m \), height of water on roof = \( h \)
  2. Step 2: Volume of pit: \[ V_{pit} = 3 \times 3 \times 2 = 18 \, m^3 \]
  3. Step 3: Setting volumes equal: \[ 100 \times h = 18 \] \[ h = \frac{18}{100} = 0.18 \, m \]

Answer: The height of standing water on the roof is \( 0.18 \, m \) (i.e., \( 18 \, cm \)).

➕ More Examples

More Examples

Example 1

Question: A school has a flat terrace with a surface area of \( 150 \, m^2 \). Rainwater collected on the terrace is channelled into a cuboidal underground tank measuring \( 5 \, m \times 4 \, m \times 3 \, m \). If the tank is completely filled by the water standing on the terrace, find the height of the standing water on the terrace.

Solution: Step 1 — Find the volume of the cuboidal tank. The tank has length \( 5 \, m \), breadth \( 4 \, m \), and depth \( 3 \, m \). \[ V_{\text{tank}} = 5 \times 4 \times 3 = 60 \, m^3 \] Step 2 — Express the volume of water on the terrace. Let the height of standing water on the terrace be \( h \) metres. The surface area of the terrace is \( 150 \, m^2 \). \[ V_{\text{roof}} = 150 \times h \] Step 3 — Apply the conservation of volume (volume of water on terrace = volume of tank). \[ 150 \times h = 60 \] Step 4 — Solve for \( h \). \[ h = \frac{60}{150} = \frac{2}{5} \, m \] Converting to centimetres: \[ h = 0.4 \, m = 40 \, cm \]

Answer: The height of standing water on the terrace is \( \frac{2}{5} \, m \), i.e., \( 0.4 \, m \) or \( 40 \, cm \).

Example 2

Question: A farmhouse courtyard has a rectangular floor of dimensions \( 20 \, m \times 15 \, m \). After heavy rain, the standing water is drained into a cuboidal recharge pit of dimensions \( 4 \, m \times 5 \, m \times 3 \, m \). If the pit is exactly filled to the brim, find the height of the water that was standing on the courtyard floor.

Solution: Step 1 — Find the surface area of the courtyard floor. \[ A = 20 \times 15 = 300 \, m^2 \] Step 2 — Find the volume of the cuboidal recharge pit. The pit has length \( 4 \, m \), breadth \( 5 \, m \), and depth \( 3 \, m \). \[ V_{\text{pit}} = 4 \times 5 \times 3 = 60 \, m^3 \] Step 3 — Let the height of standing water on the courtyard be \( h \) metres. By conservation of volume: \[ 300 \times h = 60 \] Step 4 — Solve for \( h \). \[ h = \frac{60}{300} = \frac{1}{5} \, m \] Converting to centimetres: \[ h = 0.2 \, m = 20 \, cm \]

Answer: The height of standing water on the courtyard floor is \( \frac{1}{5} \, m \), i.e., \( 0.2 \, m \) or \( 20 \, cm \).

🎯 Try a Similar Question

Try a Similar Question

Question: A school building uses rainwater harvesting. Rainwater is collected on a flat terrace roof of surface area \(120 \, m^2\). The collected water is then drained into a cuboidal recharge pit that measures \(4 \, m \times 3 \, m \times 2.5 \, m\). When the pit is completely filled by the rooftop water, find the height of the standing water on the roof (in metres and centimetres).

Solution

  1. Step 1: Find the volume of the cuboidal pit: The pit has dimensions length = \(4 \, m\), breadth = \(3 \, m\), and height = \(2.5 \, m\). Volume of pit = length \(\times\) breadth \(\times\) height \[V_{pit} = 4 \times 3 \times 2.5 = 30 \, m^3\]
  2. Step 2: Set up the equation using volume conservation: The volume of water standing on the roof equals the volume of the pit (since the pit is completely filled). Let \(h\) be the height of standing water on the roof. Then: \[V_{roof} = \text{Area of roof} \times h\] So we write: \[120 \times h = 30\]
  3. Step 3: Solve for h: Dividing both sides by 120: \[h = \frac{30}{120} = 0.25 \, m\]
  4. Step 4: Convert to centimetres: Since \(1 \, m = 100 \, cm\): \[h = 0.25 \times 100 = 25 \, cm\]

Answer: The height of standing water on the roof is \(0.25 \, m\) (i.e., \(25 \, cm\)).

Everything you get with Solver7

More questions in Surface Areas And Volumes

Chapter 12 Examples Q1 Chapter 12 Examples Q2 Chapter 12 Examples Q3 30/1/1 2022 / Section A Q2 430/1/1 2022 / Section A Q2 Chapter 12 Examples Q4 Chapter 12 Examples Q5 430/3/1 2022 / Section A Q4(a) Chapter 12 Examples Q6 430/3/1 2022 / Section A Q4(b) 430/4/1 2026 / Section A Q6 Chapter 12 Examples Q7 Exercise 12.1 Q1 430/2/1 2023 / Section A Q8 Exercise 12.1 Q2 30/5/1 2023 / Section A Q9 Exercise 12.1 Q3 30/2/1 2023 / Section A Q10 430/3/1 2024 / Section A Q10 Exercise 12.1 Q4 430/2/1 2023 / Section A Q11 Exercise 12.1 Q5 30/3/1 2026 / Section A Q12 CBSE-ADDL1 2024 / Section A Q12 Exercise 12.1 Q6 CBSE-ADDL1 2024 / Section A Q13 Exercise 12.1 Q7 30/1/1 2022 / Section C Q11(a) 430/1/1 2022 / Section C Q11(a) Exercise 12.1 Q8 30/1/1 2022 / Section C Q11(b) 430/1/1 2022 / Section C Q11(b) 430/1/1 2026 / Section A Q15 430/2/1 2026 / Section A Q15 430/3/1 2026 / Section A Q15 430/4/1 2026 / Section A Q15 CBSE-ADDL2 2024 / Section A Q15 Exercise 12.1 Q9 430/3/1 2024 / Section A Q16 Exercise 12.2 Q1 Exercise 12.2 Q2 Exercise 12.2 Q3 Exercise 12.2 Q4 30/1/1 2026 / Section A Q20 430/3/1 2022 / Section C Q14(b) 430/5/1 2023 / Section A Q20 Exercise 12.2 Q5 BritishCouncil 2021 / Section A Q21 Exercise 12.2 Q6 Exercise 12.2 Q7 Exercise 12.2 Q8 BritishCouncil 2021 / Section A Q24 Competency Based - Case Study Q1 (i) BritishCouncil 2021 / Section A Q25 Competency Based - Case Study Q1 (ii) Competency Based - Case Study Q1 (iii) Competency Based - Case Study Q1 (iv) Competency Based - Case Study Q1 (v) Competency Based - Case Study Q2 (i) 430/3/1 2024 / Section C Q28(a)