SOLVER7 Study. Nothing Else.
2022 Board Paper Q11(a)

From a solid cylinder of height 30 cm and radius 7 cm, a conical cavity of height 24 cm and same radius is hollowed out. Find the total surface area of the remaining solid.

CBSE Class 10 Maths · Surface Areas And Volumes

Solution

👶 Simple Explanation

Simple Explanation

Imagine a solid tin can made of clay. Now scoop out an ice-cream cone shape from the bottom, all the way up inside. The outside wall of the tin is still there. The top circle of the tin is still there. But the bottom is now gone — replaced by the slanted inside of the cone shape. We add up all three surfaces: the outer wall, the top circle, and the slanted cone wall inside. That total gives us how much surface the leftover solid has. The answer comes out to 2024 square centimetres.

Answer: The total surface area of the remaining solid is \( 2024 \text{ cm}^2 \).

📖 Total Surface Area of Cylinder with Conical Cavity

Detailed Explanation

When a conical cavity is hollowed out from a solid cylinder (both sharing the same base radius and the cone sitting inside the cylinder), the resulting solid has three exposed surfaces: 1. The circular top of the cylinder (the top base, which remains fully intact). 2. The curved lateral surface of the cylinder (the outer wall). 3. The curved lateral surface of the cone (the inner slant wall of the hollowed cavity).
Note: The bottom base of the cylinder is also intact, BUT since the cone is hollowed out from the top (or bottom), we must think carefully. Here, the conical cavity is made from the bottom face upward. So the bottom circular face has the cone's base cut into it — meaning the bottom circle is NOT fully solid. However, in this classic problem the cone shares the same base radius as the cylinder, so the bottom face is completely replaced by the cone's base. The cone's base (a circle of radius 7 cm) sits at the bottom — this is neither solid material nor open air; the cone is hollowed out, so the bottom circle is open (no material there). The top circle of the cylinder IS solid and contributes one circular area.
So Total Surface Area = Curved Surface Area of Cylinder + Area of top circular base + Curved Surface Area of Cone.
The slant height of the cone must be calculated using the Pythagoras theorem.

Formula Used

Slant height of cone: \( l = \sqrt{r^2 + h_c^2} \)
Curved Surface Area of Cylinder: \( 2\pi r h \)
Curved Surface Area of Cone: \( \pi r l \)
Area of circular base (top): \( \pi r^2 \)
Total Surface Area = \( 2\pi r h + \pi r l + \pi r^2 \)

Solution

  1. Step 1: Write Down the Given Values: Height of cylinder: \( h = 30 \) cm
    Radius of cylinder (and cone): \( r = 7 \) cm
    Height of cone: \( h_c = 24 \) cm
    Both the cylinder and cone share the same radius of 7 cm.
  2. Step 2: Find the Slant Height of the Cone: The slant height \( l \) of the cone is found using the Pythagoras theorem, since the radius, height, and slant height form a right triangle. \[ l = \sqrt{r^2 + h_c^2} \] \[ l = \sqrt{7^2 + 24^2} \] \[ l = \sqrt{49 + 576} \] \[ l = \sqrt{625} \] \[ l = 25 \text{ cm} \]
  3. Step 3: Identify All Surfaces of the Remaining Solid: After hollowing out the cone from the bottom of the cylinder, the remaining solid has exactly three surfaces: 1. The top circular face of the cylinder (a full circle of radius 7 cm) — this is closed solid material. 2. The curved lateral surface of the cylinder (the outer wall). 3. The curved (slant) surface of the conical cavity (the inner hollow wall).
    The bottom face of the cylinder is completely removed because the cone's base (same radius) coincides with it, leaving it open.
  4. Step 4: Calculate the Curved Surface Area of the Cylinder: The curved surface area (CSA) of the cylinder is: \[ \text{CSA of cylinder} = 2\pi r h \] \[ = 2 \times \frac{22}{7} \times 7 \times 30 \] \[ = 2 \times 22 \times 30 \] \[ = 1320 \text{ cm}^2 \]
  5. Step 5: Calculate the Area of the Top Circular Base: The top circular base of the cylinder is still solid, so we include its area: \[ \text{Area of top circle} = \pi r^2 \] \[ = \frac{22}{7} \times 7^2 \] \[ = \frac{22}{7} \times 49 \] \[ = 22 \times 7 \] \[ = 154 \text{ cm}^2 \]
  6. Step 6: Calculate the Curved Surface Area of the Cone: The curved surface area (CSA) of the conical cavity is: \[ \text{CSA of cone} = \pi r l \] \[ = \frac{22}{7} \times 7 \times 25 \] \[ = 22 \times 25 \] \[ = 550 \text{ cm}^2 \]
  7. Step 7: Calculate the Total Surface Area: Now add all three surface areas together: \[ \text{Total Surface Area} = \text{CSA of cylinder} + \text{Area of top circle} + \text{CSA of cone} \] \[ = 1320 + 154 + 550 \] \[ = 2024 \text{ cm}^2 \]

Final Answer

The total surface area of the remaining solid is \( 2024 \text{ cm}^2 \).

Common Mistake

A very common mistake is to include the bottom circular base of the cylinder in the total surface area. Since the conical cavity has the same radius as the cylinder and is hollowed out from the bottom, the entire bottom circular face is open (no material). Only the top circular face contributes to the surface area. Also, students sometimes forget to calculate the slant height of the cone and mistakenly use the vertical height in place of \( l \) when computing the curved surface area of the cone.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Identify the given dimensions: Let the common base radius be \( r = 7 \text{ cm} \), the height of the cylinder be \( h = 40 \text{ cm} \), and the height of the conical cavity be \( h_c = 24 \text{ cm} \). — Reason: Listing known values first prevents confusion when substituting into formulas later.
  2. Step 2: Identify which surfaces are exposed: The remaining solid exposes three surfaces: (i) the curved (lateral) surface of the cylinder, (ii) the top circular face of the cylinder, and (iii) the curved inner surface of the cone. The bottom face of the cylinder is entirely replaced by the open base of the cone, so it contributes no area. — Reason: Only surfaces that are actually visible (neither buried inside solid material nor absent due to the hollow) count toward total surface area.
  3. Step 3: Calculate the slant height of the cone: Using the Pythagoras theorem on the cone's right-triangle cross-section: \[ l = \sqrt{r^2 + h_c^2} \] Substituting the values: \[ l = \sqrt{7^2 + 24^2} = \sqrt{49 + 576} = \sqrt{625} = 25 \text{ cm} \] — Reason: The slant height \( l \) is needed to find the cone's curved surface area, and it is not given directly, so we derive it from the radius and vertical height.
  4. Step 4: Calculate the curved surface area of the cylinder: The formula for the lateral surface of a cylinder is \( 2\pi r h \). Substituting: \[ \text{CSA of cylinder} = 2 \times \frac{22}{7} \times 7 \times 40 \] \[ = 2 \times 22 \times 40 = 1760 \text{ cm}^2 \] — Reason: This accounts for the outer wall of the cylinder, which remains completely intact after hollowing.
  5. Step 5: Calculate the area of the top circular face: The area of the top circle is \( \pi r^2 \). Substituting: \[ \text{Top circle} = \frac{22}{7} \times 7^2 = \frac{22}{7} \times 49 = 22 \times 7 = 154 \text{ cm}^2 \] — Reason: The top face of the cylinder is solid and unaffected by the conical hollow, so it is fully included in the surface area.
  6. Step 6: Calculate the curved surface area of the cone: The formula for the curved surface of a cone is \( \pi r l \). Substituting: \[ \text{CSA of cone} = \frac{22}{7} \times 7 \times 25 = 22 \times 25 = 550 \text{ cm}^2 \] — Reason: The inner slant wall of the hollowed cone is now an exposed surface and must be included in the total.
  7. Step 7: Add all three surfaces for the total: Total Surface Area = CSA of cylinder + Top circle + CSA of cone. Adding the results: \[ \text{TSA} = 1760 + 154 + 550 \] \[ = 2024 \text{ cm}^2 \] — Reason: Summing all exposed surfaces gives the complete total surface area of the remaining solid.

Final Answer

The total surface area of the remaining solid is \( 2024 \text{ cm}^2 \).

Common Mistake

One common mistake: Students often add the bottom circular face of the cylinder (area \( \pi r^2 \)) to the total, forgetting that the conical cavity has the same base radius as the cylinder, so the entire bottom circle is open (removed by the hollow) and contributes zero area.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Slant Height of Cone: Slant height: \ l = \sqrt{r^2 + h_c^2} = \sqrt{7^2 + 24^2} = \sqrt{49 + 576} = \sqrt{625} = 25 \text{ cm}
  2. Step 2: Identify the Three Surfaces: Total Surface Area = Curved Surface Area of Cylinder + Area of top circular base + Curved Surface Area of Cone
  3. Step 3: Compute Each Part: CSA of Cylinder: \(2\pi r h = 2 \times \frac{22}{7} \times 7 \times 24 = 1056 \text{ cm}^2\). Top circle: \(\pi r^2 = \frac{22}{7} \times 7^2 = 154 \text{ cm}^2\). CSA of Cone: \(\pi r l = \frac{22}{7} \times 7 \times 25 = 550 \text{ cm}^2\).
  4. Step 4: Total: Total Surface Area = \(1056 + 154 + 550 = 2024 \text{ cm}^2\)

Answer: The total surface area of the remaining solid is \( 2024 \text{ cm}^2 \).

➕ More Examples

More Examples

Example 1

Question: A solid cylinder has height 20 cm and radius 6 cm. A conical cavity of height 16 cm and the same base radius is hollowed out from the top of the cylinder. Find the total surface area of the remaining solid. (Use \( \pi = 3.14 \))

Solution: Given: Height of cylinder \( H = 20 \) cm, radius \( r = 6 \) cm, height of cone \( h = 16 \) cm.
Step 1: Find the slant height of the cone. \[ l = \sqrt{r^2 + h^2} = \sqrt{6^2 + 16^2} = \sqrt{36 + 256} = \sqrt{292} \] \[ l = \sqrt{4 \times 73} = 2\sqrt{73} \approx 2 \times 8.544 = 17.088 \text{ cm} \]
Step 2: Identify the surfaces of the remaining solid.
The remaining solid has three surfaces: (a) Curved surface area (CSA) of the cylinder, (b) Base area of the cylinder (bottom circle), (c) CSA of the cone (inner hollow surface).
Note: The top face of the cylinder is removed when the cone is hollowed out, so it is not included.
Step 3: Calculate each surface area.
CSA of cylinder: \[ 2\pi r H = 2 \times 3.14 \times 6 \times 20 = 753.6 \text{ cm}^2 \]
Base area of cylinder: \[ \pi r^2 = 3.14 \times 6^2 = 3.14 \times 36 = 113.04 \text{ cm}^2 \]
CSA of cone: \[ \pi r l = 3.14 \times 6 \times 17.088 = 3.14 \times 102.528 \approx 321.94 \text{ cm}^2 \]
Step 4: Add all three areas. \[ \text{Total Surface Area} = 753.6 + 113.04 + 321.94 = 1188.58 \text{ cm}^2 \]

Answer: Total Surface Area of the remaining solid \( \approx 1188.58 \text{ cm}^2 \)

Example 2

Question: From a solid cylinder of height 45 cm and radius 10 cm, a conical cavity of height 36 cm and the same radius is hollowed out from one end. Find the total surface area of the remaining solid. (Use \( \pi = \frac{22}{7} \))

Solution: Given: Height of cylinder \( H = 45 \) cm, radius \( r = 10 \) cm, height of cone \( h = 36 \) cm.
Step 1: Find the slant height of the cone. \[ l = \sqrt{r^2 + h^2} = \sqrt{10^2 + 36^2} = \sqrt{100 + 1296} = \sqrt{1396} \] \[ l = \sqrt{4 \times 349} = 2\sqrt{349} \approx 2 \times 18.682 = 37.36 \text{ cm} \]
Step 2: Identify the surfaces of the remaining solid.
The three surfaces are: (a) Curved surface area of the cylinder, (b) Base area of the cylinder (the end opposite to the cavity), (c) Curved surface area of the cone (inner hollow).
The circular face from which the cone is hollowed is fully occupied by the cone's base and is not an exposed surface.
Step 3: Calculate each surface area.
CSA of cylinder: \[ 2\pi r H = 2 \times \frac{22}{7} \times 10 \times 45 = \frac{2 \times 22 \times 10 \times 45}{7} = \frac{19800}{7} = 2828.57 \text{ cm}^2 \]
Base area of cylinder: \[ \pi r^2 = \frac{22}{7} \times 10^2 = \frac{22 \times 100}{7} = \frac{2200}{7} = 314.29 \text{ cm}^2 \]
CSA of cone: \[ \pi r l = \frac{22}{7} \times 10 \times 37.36 = \frac{22 \times 10 \times 37.36}{7} = \frac{8219.2}{7} = 1174.17 \text{ cm}^2 \]
Step 4: Add all three areas. \[ \text{Total Surface Area} = 2828.57 + 314.29 + 1174.17 = 4317.03 \text{ cm}^2 \]

Answer: Total Surface Area of the remaining solid \( \approx 4317.03 \text{ cm}^2 \)

🎯 Try a Similar Question

Try a Similar Question

Question: From a solid cylinder of height 40 cm and radius 6 cm, a conical cavity of height 32 cm and the same base radius is hollowed out from the top. Find the total surface area of the remaining solid. (Use \( \pi = \frac{22}{7} \).)

Solution

  1. Step 1: Identify Given Values: Height of cylinder: \( h = 40 \) cm. Radius of cylinder and cone: \( r = 6 \) cm. Height of conical cavity: \( h_c = 32 \) cm.
  2. Step 2: Find the Slant Height of the Cone: Using the Pythagoras theorem, the slant height \( l \) of the cone is given by \( l = \sqrt{r^2 + h_c^2} \). Substituting the values: \[ l = \sqrt{6^2 + 32^2} = \sqrt{36 + 1024} = \sqrt{1060} \] Simplifying: \[ l = \sqrt{4 \times 265} = 2\sqrt{265} \approx 2 \times 16.28 = 32.56 \text{ cm} \] For exact calculation: \( \sqrt{1060} \approx 32.56 \) cm.
  3. Step 3: Understand the Surfaces of the Remaining Solid: After hollowing out the cone from the top, the surfaces are: (1) Curved surface area (CSA) of the cylinder, (2) Bottom circular base of the cylinder, (3) Curved surface area of the conical cavity (inner slant face). Note: The top circular face is fully removed (the cone opens at the top with the same radius as the cylinder).
  4. Step 4: Calculate the CSA of the Cylinder: \[ \text{CSA of cylinder} = 2\pi r h = 2 \times \frac{22}{7} \times 6 \times 40 \] \[ = 2 \times \frac{22}{7} \times 240 = \frac{10560}{7} \approx 1508.57 \text{ cm}^2 \]
  5. Step 5: Calculate the Area of the Bottom Base: \[ \text{Area of bottom base} = \pi r^2 = \frac{22}{7} \times 6^2 = \frac{22}{7} \times 36 = \frac{792}{7} \approx 113.14 \text{ cm}^2 \]
  6. Step 6: Calculate the CSA of the Conical Cavity: Using \( l = \sqrt{1060} \approx 32.56 \) cm: \[ \text{CSA of cone} = \pi r l = \frac{22}{7} \times 6 \times \sqrt{1060} \] \[ = \frac{22}{7} \times 6 \times 32.56 \approx \frac{22}{7} \times 195.36 \approx \frac{4297.92}{7} \approx 614.0 \text{ cm}^2 \]
  7. Step 7: Calculate the Total Surface Area: \[ \text{TSA} = \text{CSA of cylinder} + \text{Base area} + \text{CSA of cone} \] \[ \text{TSA} = \frac{10560}{7} + \frac{792}{7} + \frac{22}{7} \times 6 \times \sqrt{1060} \] \[ = \frac{10560 + 792}{7} + \frac{132\sqrt{1060}}{7} \] \[ = \frac{11352 + 132\sqrt{1060}}{7} \] Substituting \( \sqrt{1060} \approx 32.56 \): \[ = \frac{11352 + 132 \times 32.56}{7} = \frac{11352 + 4297.92}{7} = \frac{15649.92}{7} \approx 2235.7 \text{ cm}^2 \]

Answer: The total surface area of the remaining solid is \( \dfrac{11352 + 132\sqrt{1060}}{7} \approx 2235.7 \text{ cm}^2 \).

Everything you get with Solver7

More questions in Surface Areas And Volumes

Chapter 12 Examples Q1 Chapter 12 Examples Q2 Chapter 12 Examples Q3 30/1/1 2022 / Section A Q2 430/1/1 2022 / Section A Q2 Chapter 12 Examples Q4 Chapter 12 Examples Q5 430/3/1 2022 / Section A Q4(a) Chapter 12 Examples Q6 430/3/1 2022 / Section A Q4(b) 430/4/1 2026 / Section A Q6 Chapter 12 Examples Q7 Exercise 12.1 Q1 430/2/1 2023 / Section A Q8 Exercise 12.1 Q2 30/5/1 2023 / Section A Q9 Exercise 12.1 Q3 30/2/1 2023 / Section A Q10 430/3/1 2024 / Section A Q10 Exercise 12.1 Q4 430/2/1 2023 / Section A Q11 Exercise 12.1 Q5 30/3/1 2026 / Section A Q12 CBSE-ADDL1 2024 / Section A Q12 Exercise 12.1 Q6 CBSE-ADDL1 2024 / Section A Q13 Exercise 12.1 Q7 430/1/1 2022 / Section C Q11(a) Exercise 12.1 Q8 30/1/1 2022 / Section C Q11(b) 430/1/1 2022 / Section C Q11(b) 430/1/1 2026 / Section A Q15 430/2/1 2026 / Section A Q15 430/3/1 2026 / Section A Q15 430/4/1 2026 / Section A Q15 CBSE-ADDL2 2024 / Section A Q15 Exercise 12.1 Q9 430/3/1 2024 / Section A Q16 Exercise 12.2 Q1 Exercise 12.2 Q2 Exercise 12.2 Q3 430/3/1 2022 / Section C Q14(a) Exercise 12.2 Q4 30/1/1 2026 / Section A Q20 430/3/1 2022 / Section C Q14(b) 430/5/1 2023 / Section A Q20 Exercise 12.2 Q5 BritishCouncil 2021 / Section A Q21 Exercise 12.2 Q6 Exercise 12.2 Q7 Exercise 12.2 Q8 BritishCouncil 2021 / Section A Q24 Competency Based - Case Study Q1 (i) BritishCouncil 2021 / Section A Q25 Competency Based - Case Study Q1 (ii) Competency Based - Case Study Q1 (iii) Competency Based - Case Study Q1 (iv) Competency Based - Case Study Q1 (v) Competency Based - Case Study Q2 (i) 430/3/1 2024 / Section C Q28(a)