SOLVER7 Study. Nothing Else.
Figure It Out 4 Q1(iv)

Which of the following pairs of quantities are in inverse proportion\(?\) The speed of a cyclist and the time taken to cover a fixed route.

CBSE Class 8 Maths · Proportional Reasoning - 2

Solution

👶 Simple Explanation

Simple Explanation

Imagine a cyclist riding the same road every day. When she pedals faster, she reaches home sooner. When she goes slower, it takes longer. The road never changes its length! So speed and time work like a seesaw — one goes up, the other comes down. Their product always equals the same fixed distance. That is exactly what inverse proportion means — two things that balance each other out so their product stays the same.

Answer: Yes, the speed of a cyclist and the time taken to cover a fixed route are in inverse proportion, because \( \text{speed} \times \text{time} = \text{fixed distance} \).

📖 Speed and Time: Inverse Proportion?

Detailed Explanation

Two quantities are said to be in inverse proportion if an increase in one quantity causes a proportional decrease in the other, in such a way that their product stays constant. In this problem the route (the distance) is fixed. We know that distance equals speed multiplied by time. If the distance is fixed, then whenever the cyclist rides faster, the time taken becomes smaller, and whenever the cyclist rides slower, the time taken becomes larger. Since the product of speed and time always equals the same fixed distance, speed and time behave exactly like inversely proportional quantities.

Formula Used

For inverse proportion: \( x_1 y_1 = x_2 y_2 = \text{constant} \). Here \( \text{speed} \times \text{time} = \text{distance (fixed)} \).

Solution

  1. Step 1: Identify the two quantities and what is fixed. The two quantities are the speed of the cyclist and the time taken. The route, that is the distance, stays the same throughout.
  2. Step 2: Recall the relationship between them. The basic relation is \( \text{distance} = \text{speed} \times \text{time} \). Rearranging shows that the product of speed and time equals the distance.
  3. Step 3: Check the product. Suppose the distance is \( 60 \) km. At a speed of \( 20 \) km/h the time is \( 3 \) hours, so \( 20 \times 3 = 60 \). At a speed of \( 30 \) km/h the time is \( 2 \) hours, so \( 30 \times 2 = 60 \). The product stays constant.
  4. Step 4: Observe the pattern. As speed increases from \( 20 \) to \( 30 \), the time decreases from \( 3 \) to \( 2 \). One quantity increases while the other decreases and their product is unchanged, which is exactly the condition \( x_1 y_1 = x_2 y_2 \).
  5. Step 5: Conclude. Since the product of speed and time is always equal to the fixed distance, speed and time are in inverse proportion.

Final Answer

Yes, the speed of a cyclist and the time taken to cover a fixed route are in inverse proportion, because \( \text{speed} \times \text{time} = \text{fixed distance} \).

Common Mistake

A common mistake is thinking that because 'more speed' sounds like 'more' of something, the two must be in direct proportion. In direct proportion both quantities increase together; here more speed gives less time, so it is inverse proportion, not direct.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Identify the two quantities involved: speed of the cyclist and time taken to travel. The distance (route) stays fixed throughout. — Reason: Knowing what is fixed and what changes helps us decide which type of proportion to check.
  2. Step 2: Write the fundamental relation: \[ \text{distance} = \text{speed} \times \text{time} \] Since distance is fixed, we get \[ \text{speed} \times \text{time} = \text{constant} \] — Reason: Rearranging the distance formula reveals whether the product of the two quantities stays constant, which is the key test for inverse proportion.
  3. Step 3: Take a concrete example. Let the fixed distance be \( 60 \) km. At speed \( 20 \) km/h, the time taken is \( 3 \) hours. Check the product: \[ 20 \times 3 = 60 \] — Reason: A numerical example makes it easy to verify the constant-product rule.
  4. Step 4: Now increase the speed to \( 30 \) km/h. The time taken becomes \( 2 \) hours. Check the product again: \[ 30 \times 2 = 60 \] — Reason: Repeating the check at a different speed confirms whether the product remains the same value, \( 60 \).
  5. Step 5: Observe the pattern: as speed increased from \( 20 \) km/h to \( 30 \) km/h, time decreased from \( 3 \) hours to \( 2 \) hours, yet both products equal \( 60 \). So \( x_1 y_1 = x_2 y_2 \), confirming the inverse proportion condition. — Reason: This pattern — one quantity rising while the other falls, product unchanged — is the exact definition of inverse proportion.
  6. Step 6: Conclude: since \( \text{speed} \times \text{time} = \text{fixed distance} \) holds for every possible speed on the same route, the two quantities satisfy the inverse proportion rule \( x_1 y_1 = x_2 y_2 \). — Reason: Meeting this algebraic condition is sufficient to declare the quantities inversely proportional.

Final Answer

Yes, the speed of a cyclist and the time taken to cover a fixed route are in inverse proportion, because \( \text{speed} \times \text{time} = \text{fixed distance} \).

Common Mistake

One common mistake: students confuse direct and inverse proportion — they may argue that 'more speed means more distance' (direct), forgetting that here the distance is fixed, so more speed must mean less time (inverse).

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given: distance is fixed, and \( \text{distance} = \text{speed} \times \text{time} \).
  2. Step 2: Check with distance \( = 60 \) km: at \( 20 \) km/h, time \( = 3 \) h, so \( 20 \times 3 = 60 \); at \( 30 \) km/h, time \( = 2 \) h, so \( 30 \times 2 = 60 \). Product is constant.
  3. Step 3: Since \( \text{speed} \times \text{time} = \text{fixed distance} = \text{constant} \), the two quantities are in inverse proportion.

Answer: Yes, the speed of a cyclist and the time taken to cover a fixed route are in inverse proportion, because \( \text{speed} \times \text{time} = \text{fixed distance} \).

➕ More Examples

More Examples

Example 1

Question: A pipe fills a tank in 40 minutes when water flows at a rate of 15 litres per minute. If the flow rate is increased to 30 litres per minute, how long will it take to fill the same tank? Are the flow rate and the time taken in inverse proportion? Verify your answer.

Solution: Step 1: Identify the two quantities. The two quantities are the flow rate (litres per minute) and the time taken (minutes) to fill a fixed tank. Step 2: Check whether they are in inverse proportion. For inverse proportion, the product of corresponding values must be constant. Product at flow rate 15 litres/min: \( 15 \times 40 = 600 \) Step 3: Find the time when the flow rate is 30 litres/min. Using the inverse proportion relation \( x_1 \times y_1 = x_2 \times y_2 \): \[ 15 \times 40 = 30 \times t \] \[ 600 = 30 \times t \] \[ t = \frac{600}{30} = 20 \text{ minutes} \] Step 4: Verify the product. Product at flow rate 30 litres/min: \( 30 \times 20 = 600 \) Both products are equal to 600, confirming the product is constant. Step 5: Conclusion. Since the product of flow rate and time is always 600 (a constant), the two quantities ARE in inverse proportion. When the flow rate doubled from 15 to 30, the time halved from 40 to 20 minutes.

Answer: Yes, the flow rate and the time taken to fill the tank are in inverse proportion. The tank will be filled in 20 minutes at a flow rate of 30 litres per minute.

Example 2

Question: A contractor employs 18 workers to complete a construction job in 24 days. Due to an urgent deadline, he needs to finish the same job in 16 days. How many workers must he employ? Are the number of workers and the number of days in inverse proportion? Verify.

Solution: Step 1: Identify the two quantities. The two quantities are the number of workers and the number of days to complete a fixed job. Step 2: Reason about the relationship. If more workers are employed, the job is completed in fewer days. So as one quantity increases, the other decreases — this suggests inverse proportion. Step 3: Verify using the constant product rule. Product for 18 workers and 24 days: \( 18 \times 24 = 432 \) For inverse proportion, the product must remain 432. Step 4: Find the number of workers needed to finish in 16 days. Using \( x_1 \times y_1 = x_2 \times y_2 \): \[ 18 \times 24 = w \times 16 \] \[ 432 = w \times 16 \] \[ w = \frac{432}{16} = 27 \] Step 5: Verify. Product for 27 workers and 16 days: \( 27 \times 16 = 432 \) The product is constant (432) in both cases. Step 6: Conclusion. Since the product of the number of workers and the number of days is always constant, the two quantities ARE in inverse proportion. The contractor must employ 27 workers to finish the job in 16 days.

Answer: Yes, the number of workers and the number of days are in inverse proportion. The contractor must employ 27 workers to complete the job in 16 days.

🎯 Try a Similar Question

Try a Similar Question

Question: State whether the following pairs of quantities are in direct proportion, inverse proportion, or neither. Give a reason for each. (a) The number of workers employed to build a wall and the number of days taken to complete it (assuming each worker does the same amount of work per day). (b) The number of identical books purchased and the total cost of those books.

Solution

  1. Step 1: Recall the definitions: Two quantities x and y are in inverse proportion if \( x \times y = k \) (a constant). They are in direct proportion if \( \frac{x}{y} = k \) (a constant).
  2. Step 2: Analyse part (a) — Number of workers and number of days: Let the total work required to build the wall be fixed. If the number of workers is \( w \) and the number of days taken is \( d \), then the total work done equals \( w \times d \), which is a fixed constant. For example, if 4 workers take 12 days, then \( 4 \times 12 = 48 \). If 6 workers are employed, they will take \( 48 \div 6 = 8 \) days. As the number of workers increases, the number of days decreases, and their product stays constant.
  3. Step 3: Conclusion for part (a): Since \( w \times d = \text{constant} \), the number of workers and the number of days are in inverse proportion.
  4. Step 4: Analyse part (b) — Number of books and total cost: Let the cost of one book be \( c \) (fixed). If \( n \) books are purchased, the total cost is \( T = n \times c \). So \( \frac{T}{n} = c \), which is a constant. For example, if 3 books cost \( \rupee \) 90, then each book costs \( \rupee \) 30. If 6 books are purchased, the cost is \( 6 \times 30 = \rupee \) 180. The ratio \( \frac{T}{n} \) remains 30 throughout.
  5. Step 5: Conclusion for part (b): Since \( \frac{T}{n} = \text{constant} \), the number of books and the total cost are in direct proportion.

Answer: (a) The number of workers and the number of days taken are in inverse proportion, because \( \text{workers} \times \text{days} = \text{fixed total work} \) (a constant). (b) The number of books and the total cost are in direct proportion, because \( \frac{\text{total cost}}{\text{number of books}} = \text{cost per book} \) (a constant).

Everything you get with Solver7

More questions in Proportional Reasoning - 2