SOLVER7 Study. Nothing Else.
Figure It Out 5 Q5

Here is one of the ways to convert trapezium \(ABCD\) into a rectangle \(EFGH\) of equal area — Given the trapezium \(ABCD,\) how do we find the vertices of the rectangle \(EFGH?\)
\([Hint:\) If \(\Delta AHI\cong \Delta DGI\) and \(\Delta BEJ \cong \Delta CFJ,\) then the trapezium and rectangle have equal areas\(.]\)

CBSE Class 8 Maths · Area

Solution

👶 Simple Explanation

Simple Explanation

Imagine a trapezium as a slice of cake with a slanted side. Now, snip off the pointy triangle corners from each slanted side. These tiny cut-off triangles fit perfectly onto the gaps at the bottom. Nothing is wasted and nothing is added. The shape magically becomes a neat rectangle. Because the pieces just moved around, the area stays exactly the same. It is like rearranging puzzle pieces on a table — the total space covered never changes, no matter how you move the pieces.

Answer: The vertices of the rectangle are found like this: take \(I\) as the midpoint of \(AD\) and \(J\) as the midpoint of \(BC\); drop perpendiculars from \(A\) and \(B\) to the base to fix \(G\) and \(F\), and extend them to \(H\) and \(E\). Cutting \(\triangle AHI\) and \(\triangle BEJ\) and fitting them onto \(\triangle DGI\) and \(\triangle CFJ\) turns the trapezium into rectangle \(EFGH\). Since \( \triangle AHI \cong \triangle DGI \) and \( \triangle BEJ \cong \triangle CFJ \), the two figures have equal areas.

📖 Converting a Trapezium into a Rectangle of Equal Area

Detailed Explanation

In the figure, \(AB\) is the top parallel side and \(DC\) is the bottom parallel side of the trapezium, and \(GF\) is the height between them. From vertex \(A\) we drop a perpendicular to the base and mark point \(H\) above (outside the top), and from vertex \(B\) we mark point \(E\) similarly. The point \(I\) is the midpoint of the left slant side \(AD\), and \(J\) is the midpoint of the right slant side \(BC\). By cutting along \(HI\) and \(EJ\), the small triangle \(\triangle AHI\) is turned and fitted onto \(\triangle DGI\), and the small triangle \(\triangle BEJ\) is fitted onto \(\triangle CFJ\). Because these triangles are congruent, no area is lost or gained. What is removed from the trapezium is added back, so the trapezium and the rectangle have the same area. This idea uses congruent triangles (\(\cong\)) and the rule that congruent figures have equal areas.

Formula Used

Area of trapezium \( = \frac{1}{2}(a + b)h \), where \(a\) and \(b\) are the parallel sides and \(h\) is the height. Area of rectangle \( = \text{length} \times \text{breadth} \).

Solution

  1. Step 1: Identify the parts of the trapezium: In trapezium \(ABCD\), the two parallel sides are the top side \(AB\) and the bottom side \(DC\). The slant sides are \(AD\) (left) and \(BC\) (right). The perpendicular distance between the parallel sides is the height \(h\).
  2. Step 2: Mark the midpoints of the slant sides: Find the midpoint \(I\) of the left slant side \(AD\), and the midpoint \(J\) of the right slant side \(BC\). These midpoints are the pivots (turning points) about which the corner triangles will be flipped.
  3. Step 3: Draw the rectangle's vertical sides: From \(A\) draw a vertical line up to a point \(H\) and down to the base at \(G\), so that \(HG \perp DC\). Similarly, from \(B\) draw a vertical line to \(E\) and down to \(F\) on the base, so \(EF \perp DC\). Now \(GF\) becomes the base of the rectangle and \(HG\), \(EF\) are its equal vertical sides (the height).
  4. Step 4: Cut the two corner triangles: Cut along \(HI\) to separate \(\triangle AHI\), and cut along \(EJ\) to separate \(\triangle BEJ\). These are the two small right triangles at the top corners that stick out of the rectangle shape.
  5. Step 5: Show the triangles are congruent: Since \(I\) is the midpoint of \(AD\), we have \(AI = DI\). Also \(\angle AHI = \angle DGI = 90^\circ\) and the vertically opposite angles at \(I\) are equal. So by the ASA rule, \( \triangle AHI \cong \triangle DGI \). In the same way, since \(J\) is the midpoint of \(BC\), \( \triangle BEJ \cong \triangle CFJ \).
  6. Step 6: Fit the pieces to form the rectangle: Rotate \(\triangle AHI\) about \(I\) so it lands exactly on \(\triangle DGI\), filling the gap near \(D\). Rotate \(\triangle BEJ\) about \(J\) so it lands exactly on \(\triangle CFJ\), filling the gap near \(C\). The trapezium now takes the shape of rectangle \(EFGH\).
  7. Step 7: Confirm the areas are equal: Congruent triangles have equal areas, so cutting a triangle from one place and placing it in another keeps the total area unchanged. Therefore \[ \text{Area of trapezium } ABCD = \text{Area of rectangle } EFGH. \] Using the formulas, \( \frac{1}{2}(AB + DC)\,h \) equals \( GF \times HG \).

Final Answer

The vertices of the rectangle are found like this: take \(I\) as the midpoint of \(AD\) and \(J\) as the midpoint of \(BC\); drop perpendiculars from \(A\) and \(B\) to the base to fix \(G\) and \(F\), and extend them to \(H\) and \(E\). Cutting \(\triangle AHI\) and \(\triangle BEJ\) and fitting them onto \(\triangle DGI\) and \(\triangle CFJ\) turns the trapezium into rectangle \(EFGH\). Since \( \triangle AHI \cong \triangle DGI \) and \( \triangle BEJ \cong \triangle CFJ \), the two figures have equal areas.

Common Mistake

A common mistake is placing \(I\) and \(J\) at random points on the slant sides instead of exactly at the midpoints. If they are not the midpoints, the triangles will not be congruent, the pieces will not fit perfectly, and the areas of the trapezium and rectangle will not be equal.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Label the trapezium \( ABCD \), where \( AB \) is the shorter top side and \( DC \) is the longer bottom side, with \( AB \parallel DC \). The two slant (non-parallel) sides are \( AD \) on the left and \( BC \) on the right. — Reason: Clearly naming each side helps us keep track of which parts we will cut and move.
  2. Step 2: Find the midpoint \( I \) of the left slant side \( AD \), and the midpoint \( J \) of the right slant side \( BC \). — Reason: Cutting at the exact midpoints guarantees that the two triangles we will remove are congruent to the gaps they must fill, so no area is lost or added.
  3. Step 3: From vertex \( A \), drop a perpendicular to the line of the base \( DC \) and mark the foot as \( G \). Extend this perpendicular upward (beyond \( A \)) to a point \( H \) such that \( I \) is the midpoint of \( AH \). Similarly, from vertex \( B \), drop a perpendicular to the base and mark its foot as \( F \). Extend it upward to a point \( E \) such that \( J \) is the midpoint of \( BE \). — Reason: These perpendiculars set the height of the rectangle and define the four corners \( E \), \( F \), \( G \), \( H \) of the rectangle we want to form.
  4. Step 4: Now observe the two small triangles that have been created: \( \triangle AHI \) on the upper-left (outside the original trapezium) and \( \triangle DGI \) on the lower-left (inside the original trapezium). By construction, \( I \) is the midpoint of \( AD \), so \( AI = DI \). The angles at \( H \) and \( G \) are both \( 90^\circ \), and the angles at \( I \) are vertically opposite. Therefore \( \triangle AHI \cong \triangle DGI \) by the AAS rule. — Reason: Establishing congruence proves the two triangles have exactly the same shape and area, so swapping them changes nothing.
  5. Step 5: By the same argument on the right side: \( J \) is the midpoint of \( BC \), the angles at \( E \) and \( F \) are both \( 90^\circ \), and the angles at \( J \) are vertically opposite. Therefore \( \triangle BEJ \cong \triangle CFJ \) by the AAS rule. — Reason: This confirms the right-side rearrangement also preserves area perfectly.
  6. Step 6: Cut along \( HI \) and remove \( \triangle AHI \) from above the trapezium; fit it exactly onto \( \triangle DGI \) on the lower-left. Likewise, cut along \( EJ \) and fit \( \triangle BEJ \) onto \( \triangle CFJ \) on the lower-right. The resulting shape is rectangle \( EFGH \). — Reason: Because the removed pieces are congruent to the pieces they replace, the total area is unchanged; the trapezium and the rectangle \( EFGH \) have equal areas.
  7. Step 7: Verify using formulas: the rectangle \( EFGH \) has breadth equal to \( \frac{1}{2}(AB + DC) \) and height equal to \( h \), giving area \( \frac{1}{2}(AB + DC) \times h \). This matches the trapezium area formula \( \frac{1}{2}(a + b)h \) exactly. — Reason: Numerical agreement confirms that the geometric rearrangement correctly preserves area.

Final Answer

The vertices of the rectangle are found like this: take \(I\) as the midpoint of \(AD\) and \(J\) as the midpoint of \(BC\); drop perpendiculars from \(A\) and \(B\) to the base to fix \(G\) and \(F\), and extend them to \(H\) and \(E\). Cutting \(\triangle AHI\) and \(\triangle BEJ\) and fitting them onto \(\triangle DGI\) and \(\triangle CFJ\) turns the trapezium into rectangle \(EFGH\). Since \( \triangle AHI \cong \triangle DGI \) and \( \triangle BEJ \cong \triangle CFJ \), the two figures have equal areas.

Common Mistake

One common mistake: students mark the midpoint on the wrong segment — they bisect the parallel side instead of the slant side. The midpoint must be taken on the non-parallel (slant) sides \( AD \) and \( BC \), not on \( AB \) or \( DC \), because the cut must create two triangles that are congruent to the gaps on the base.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: In trapezium \( ABCD \): \( AB \parallel DC \), midpoint \( I \) of \( AD \), midpoint \( J \) of \( BC \).
  2. Step 2: Drop perpendiculars from \( A \) and \( B \) to base \( DC \), meeting at \( G \) and \( F \); extend upward to \( H \) and \( E \) respectively.
  3. Step 3: Cut along \( HI \) and \( EJ \): \( \triangle AHI \cong \triangle DGI \) and \( \triangle BEJ \cong \triangle CFJ \), so pieces fit exactly onto the gaps.
  4. Step 4: Rearranged figure \( = \) rectangle \( EFGH \); since congruent pieces are moved (not added or removed), area is preserved.

Answer: The vertices of the rectangle are found like this: take \(I\) as the midpoint of \(AD\) and \(J\) as the midpoint of \(BC\); drop perpendiculars from \(A\) and \(B\) to the base to fix \(G\) and \(F\), and extend them to \(H\) and \(E\). Cutting \(\triangle AHI\) and \(\triangle BEJ\) and fitting them onto \(\triangle DGI\) and \(\triangle CFJ\) turns the trapezium into rectangle \(EFGH\). Since \( \triangle AHI \cong \triangle DGI \) and \( \triangle BEJ \cong \triangle CFJ \), the two figures have equal areas.

➕ More Examples

More Examples

Example 1

Question: Trapezium PQRS has parallel sides PQ = 10 cm and SR = 6 cm, with a perpendicular height of 8 cm. Show how this trapezium can be rearranged into a rectangle of equal area. Find the length and breadth of the rectangle, and verify that the areas are equal.

Solution: Step 1: Identify the given measurements of trapezium PQRS. Parallel sides: \( PQ = 10 \) cm and \( SR = 6 \) cm. Height: \( h = 8 \) cm. Step 2: Calculate the area of the trapezium. \[ \text{Area of trapezium} = \frac{1}{2}(PQ + SR) \times h \] \[ = \frac{1}{2}(10 + 6) \times 8 \] \[ = \frac{1}{2} \times 16 \times 8 = 64 \text{ cm}^2 \] Step 3: Find the midpoints of the two non-parallel sides (legs) of the trapezium. Call these midpoints M and N. Step 4: Draw a horizontal line through M and N parallel to the two parallel sides. This line divides each leg into two equal halves. Step 5: Cut the triangle at one end of the trapezium (say, the triangle formed at the side SR end) along leg midpoint M. Flip this triangle and attach it to the opposite end (the PQ end), fitting it neatly alongside the remaining piece. Step 6: The rearranged shape is now a rectangle. Its breadth equals the height of the trapezium: \[ \text{Breadth of rectangle} = h = 8 \text{ cm} \] Its length equals the average of the two parallel sides: \[ \text{Length of rectangle} = \frac{PQ + SR}{2} = \frac{10 + 6}{2} = \frac{16}{2} = 8 \text{ cm} \] Step 7: Verify the areas are equal. \[ \text{Area of rectangle} = \text{Length} \times \text{Breadth} = 8 \times 8 = 64 \text{ cm}^2 \] Since \( 64 \text{ cm}^2 = 64 \text{ cm}^2 \), the trapezium and rectangle have equal areas.

Answer: Length of rectangle = 8 cm, Breadth = 8 cm, Area = 64 cm²

Example 2

Question: Trapezium ABCD has parallel sides AB = 14 cm and CD = 8 cm, and a height of 6 cm. By cutting and rearranging triangular pieces using the midpoints of the non-parallel sides, convert it into a rectangle EFGH of equal area. Find the dimensions of the rectangle and confirm that the two areas are equal.

Solution: Step 1: Write down the measurements of trapezium ABCD. Parallel sides: \( AB = 14 \) cm and \( CD = 8 \) cm. Height: \( h = 6 \) cm. Step 2: Calculate the area of the trapezium. \[ \text{Area of trapezium ABCD} = \frac{1}{2}(AB + CD) \times h \] \[ = \frac{1}{2}(14 + 8) \times 6 \] \[ = \frac{1}{2} \times 22 \times 6 = 66 \text{ cm}^2 \] Step 3: Mark the midpoints of the two legs (non-parallel sides) AD and BC. Call them P and Q respectively. Step 4: Draw a line segment PQ parallel to both AB and CD. This line is at a height of \( \frac{h}{2} = 3 \) cm from both AB and CD. Step 5: Consider triangle AEP at one end. Cut along line AP (the upper half of leg AD) and along a vertical from P. Flip this triangle and attach it to the opposite side of the trapezium at the BC end. Similarly, the triangle at the CD end is repositioned. Step 6: After rearrangement, rectangle EFGH is formed. Its breadth equals the height of the trapezium: \[ \text{Breadth of rectangle EFGH} = h = 6 \text{ cm} \] Its length equals the average of the two parallel sides: \[ \text{Length of rectangle EFGH} = \frac{AB + CD}{2} = \frac{14 + 8}{2} = \frac{22}{2} = 11 \text{ cm} \] Step 7: Verify that the areas match. \[ \text{Area of rectangle EFGH} = 11 \times 6 = 66 \text{ cm}^2 \] Since both areas equal \( 66 \text{ cm}^2 \), the rearrangement is valid and the areas are equal.

Answer: Length of rectangle = 11 cm, Breadth = 6 cm, Area = 66 cm²

🎯 Try a Similar Question

Try a Similar Question

Question: Trapezium \( PQRS \) has \( PQ \parallel SR \), with \( PQ = 10 \) cm, \( SR = 6 \) cm, and height \( h = 4 \) cm. Describe how to convert trapezium \( PQRS \) into a parallelogram \( PQMN \) of equal area by cutting and rearranging one triangular piece. Identify the midpoint used, name the congruent triangles involved, and verify that the parallelogram and trapezium have the same area.

Solution

  1. Step 1: Find the midpoint of the non-parallel side: Let \( M \) be the midpoint of side \( PS \). Draw a line through \( M \) parallel to \( PQ \) (and \( SR \)) to cut the trapezium into two parts.
  2. Step 2: Identify the triangular piece to be moved: Extend \( SR \) beyond \( S \) to a point \( N \) such that \( SN = PQ - SR = 10 - 6 = 4 \) cm. Now consider \( \triangle PSN \) (with vertex at \( M \), the midpoint of \( PS \)). Cut off \( \triangle SMR' \) from the left of \( S \) and fit it onto the right of \( Q \) to form the parallelogram.
  3. Step 3: Show the two triangles are congruent: Let \( M \) be the midpoint of \( PS \). Drop a perpendicular from \( S \) to \( PQ \) meeting it at \( T \). In \( \triangle SMT \) and the triangle formed on the other side, we have: \( SM = MP \) (since \( M \) is the midpoint), the heights are equal, and the included angles are equal (alternate interior angles with parallel lines). Therefore the two triangles are congruent by ASA (Angle-Side-Angle), so \( \triangle SMT \cong \triangle MPT' \).
  4. Step 4: Calculate the area of the trapezium: Area of trapezium \( PQRS \) is given by the formula \( \frac{1}{2}(a + b)h \). Substituting \( a = 10 \) cm, \( b = 6 \) cm, and \( h = 4 \) cm: \[ \text{Area} = \frac{1}{2}(10 + 6) \times 4 = \frac{1}{2} \times 16 \times 4 = 32 \text{ cm}^2 \]
  5. Step 5: Calculate the area of the resulting parallelogram: After rearranging the congruent triangle, the resulting parallelogram has base \( PQ = 10 \) cm and the same height \( h = 4 \) cm. Area of parallelogram is base \( \times \) height: \[ \text{Area} = 10 \times 4 = 40 \text{ cm}^2 \]
  6. Step 6: Identify the discrepancy and correct the parallelogram base: When we cut \( \triangle SMR \) from one end of the trapezium and place it at the other end, the new base of the parallelogram equals the average of the two parallel sides: \( \frac{PQ + SR}{2} = \frac{10 + 6}{2} = 8 \) cm. So the parallelogram has base \( 8 \) cm and height \( 4 \) cm. Its area is \[ 8 \times 4 = 32 \text{ cm}^2 \] which equals the area of the trapezium, confirming the rearrangement preserves area.
  7. Step 7: State the conclusion: By taking \( M \) as the midpoint of side \( PS \), cutting \( \triangle SMT \) from one end, and attaching it at the other end of the trapezium, we obtain a parallelogram with base equal to \( \frac{PQ + SR}{2} = 8 \) cm and height \( 4 \) cm. Since \( \triangle SMT \cong \triangle MPT' \), no area is gained or lost, so the parallelogram and trapezium both have area \( 32 \) cm\(^2\).

Answer: The midpoint \( M \) of side \( PS \) is the key construction point. Cutting the triangle at \( M \) from one slanted end of the trapezium and placing it at the other end produces a parallelogram with base \( \frac{PQ + SR}{2} = \frac{10 + 6}{2} = 8 \) cm and height \( 4 \) cm. Since the two triangles involved are congruent (by ASA), the area is preserved, and both the trapezium and the new parallelogram have area \( 32 \) cm\(^2\).

Everything you get with Solver7

More questions in Area