In the given figure, \(\dfrac{QR}{QS}=\dfrac{QT}{PR} \) and \(\angle1=\angle2\) Prove that \(\triangle PQS \sim \triangle TQR.\)
CBSE Class 10 Maths · Triangles
CBSE Class 10 Maths · Triangles
Imagine two triangles that look like twins. When two angles inside a triangle are equal, the sides across from those angles must also be equal. So if \(\angle 1 = \angle 2\) in triangle PQR, the sides \(PQ\) and \(PR\) are equal, like two matching legs. We use this to swap \(PR\) for \(PQ\) in a fraction we are given. After swapping, both triangles share the same angle at point \(Q\) and have matching side ratios. That is enough to call them similar triangles.
Answer: Hence, using \(PQ = PR\) (from \(\angle 1 = \angle 2\)) and the common angle at \(Q\), by SAS similarity we get \(\triangle PQS \sim \triangle TQR\).
Two triangles are similar if their corresponding angles are equal and their corresponding sides are in proportion. By the AA (Angle-Angle) similarity criterion, if two pairs of corresponding angles are equal, the triangles are similar. In this problem, we are given a ratio of sides and an equality of angles. The key idea is to first use the given angle condition to convert the given ratio into a ratio of the correct corresponding sides of triangles PQS and TQR, and then apply the SAS similarity criterion.
SAS Similarity: If one angle of a triangle is equal to one angle of another triangle and the sides including these angles are proportional, then the two triangles are similar. Also, in a triangle, sides opposite to equal angles are equal.
Hence, using \(PQ = PR\) (from \(\angle 1 = \angle 2\)) and the common angle at \(Q\), by SAS similarity we get \(\triangle PQS \sim \triangle TQR\).
A common mistake is to directly apply the given ratio \(\dfrac{QR}{QS} = \dfrac{QT}{PR}\) without first using \(\angle 1 = \angle 2\) to conclude \(PQ = PR\). Without this substitution, the ratio does not represent corresponding sides of \(\triangle PQS\) and \(\triangle TQR\), so SAS similarity cannot be applied.
Hence, using \(PQ = PR\) (from \(\angle 1 = \angle 2\)) and the common angle at \(Q\), by SAS similarity we get \(\triangle PQS \sim \triangle TQR\).
One common mistake: Students substitute \(PQ = PR\) in the wrong place and end up with a proportion that does not correspond to the sides surrounding the common angle at \(Q\), making the SAS criterion impossible to apply. Always check that the proportional sides are the ones actually including the equal angle.
Answer: Hence, using \(PQ = PR\) (from \(\angle 1 = \angle 2\)) and the common angle at \(Q\), by SAS similarity we get \(\triangle PQS \sim \triangle TQR\).
Question: In the given figure, △ABC and △DEF share vertex D on AB. It is given that \[ \frac{AB}{AD} = \frac{AC}{DE} \] and ∠1 = ∠2, where ∠1 and ∠2 are the angles at A in △ABC and △ADE respectively (i.e., ∠BAC = ∠DAE = ∠DAC, meaning ∠ACD = ∠ADC). Actually, consider the following self-contained problem:
In △PQR, ∠1 = ∠2 where ∠1 = ∠QPR and ∠2 = ∠QRP. A point S lies on QR such that PS is drawn. It is also given that \[ \frac{QP}{QS} = \frac{QR}{QP}. \]
Prove that △QPS ∼ △QRP.
Solution: Given: In △PQR, ∠1 = ∠2 i.e., ∠QPR = ∠QRP, and \[ \frac{QP}{QS} = \frac{QR}{QP}. \]
Step 1: Use the angle condition to find equal sides.
In △PQR, ∠QPR = ∠QRP (given as ∠1 = ∠2).
Since the base angles are equal, triangle PQR is isosceles, so the sides opposite these equal angles are equal: \[ QP = QP \]
Wait — ∠QPR is at vertex P and ∠QRP is at vertex R. The side opposite ∠QPR is QR, and the side opposite ∠QRP is QP. So equal angles give: \[ QR = QP. \]
Step 2: Substitute into the given ratio.
Since ∠QPR = ∠QRP, the sides opposite to them are equal, so QP = QR... let us re-examine. In triangle PQR: angle at P is ∠QPR, angle at R is ∠QRP. Side opposite angle P is QR, side opposite angle R is QP. For these angles to be equal we need QP = QR. Hence: \[ QP = QR. \]
Now substitute QR = QP in the given condition \[ \frac{QP}{QS} = \frac{QR}{QP}: \] \[ \frac{QP}{QS} = \frac{QP}{QP} \]
That would give QS = QP which is too specific. Let us re-read: the condition is \[ \frac{QP}{QS} = \frac{QR}{QP}. \]
Using QP = QR, replace QR with QP: \[ \frac{QP}{QS} = \frac{QP}{QP} = 1, \]
so QS = QP. This is a valid deduction but let us instead proceed directly with the SAS approach without substituting numerically.
Step 3: Identify the SAS condition for △QPS and △QRP.
We need to prove △QPS ∼ △QRP.
The correspondence is Q↔Q, P↔R, S↔P.
For SAS similarity we check: (i) ∠PQS = ∠RQP (common angle at Q). Both triangles share angle Q, so ∠PQS = ∠RQP. ✓ (ii) The sides including this common angle must be proportional: \[ \frac{QP}{QR} = \frac{QS}{QP}. \]
This is the same as \[ \frac{QP}{QS} = \frac{QR}{QP}, \]
which is exactly the given condition. ✓
Step 4: Conclude by SAS similarity.
In △QPS and △QRP: \[ \frac{QP}{QR} = \frac{QS}{QP} \quad (\text{from the given ratio}) \]
and the included angle ∠PQS = ∠RQP (common angle).
By the SAS similarity criterion, \[ \triangle QPS \sim \triangle QRP. \]
Answer: \( \triangle QPS \sim \triangle QRP \) by SAS similarity.
Question: In △ABC, ∠ABD = ∠ADB where D is a point on BC. It is given that \[ \frac{AB}{BE} = \frac{BD}{AB}, \]
where E is a point on AB. Prove that △ABE ∼ △BDA.
Solution: Given: In △ABD, ∠ABD = ∠ADB (angles at B and D respectively), and \[ \frac{AB}{BE} = \frac{BD}{AB}. \]
Step 1: Use the given angle condition.
In △ABD, ∠ABD = ∠ADB.
The side opposite ∠ABD is AD, and the side opposite ∠ADB is AB.
Since the angles are equal, the sides opposite them are equal: \[ AB = AD. \]
Step 2: Rewrite the given ratio using AB = AD.
The given condition is \[ \frac{AB}{BE} = \frac{BD}{AB}. \]
Since AB = AD, replace AB in the numerator of the right-hand side with AD: \[ \frac{AB}{BE} = \frac{BD}{AD}. \]
This can be rewritten as \[ \frac{AB}{BD} = \frac{BE}{AD}. \]
Step 3: Identify the SAS condition for △ABE and △BDA.
The correspondence is A↔B, B↔D, E↔A.
For SAS similarity we need: (i) A pair of proportional sides on each side of a common (or equal) included angle.
The included angle at B in △ABE is ∠ABE, and the included angle at D in △BDA is ∠BDA.
But we are told ∠ABD = ∠ADB, and since E lies on AB, ∠ABE = ∠ABD (same angle). Also ∠BDA = ∠ADB. Hence: \[ \angle ABE = \angle BDA. \] (ii) The sides including these angles must be proportional. In △ABE the sides including ∠ABE are AB and BE. In △BDA the sides including ∠BDA are BD and DA.
We need to check: \[ \frac{AB}{BD} = \frac{BE}{DA}. \]
From the given condition \[ \frac{AB}{BE} = \frac{BD}{AB}, \]
cross-multiplying gives \[ AB^2 = BE \cdot BD. \]
Using AB = AD: \[ AD^2 = BE \cdot BD, \]
so \[ \frac{AD}{BE} = \frac{BD}{AD}, \]
which rearranges to \[ \frac{AB}{BD} = \frac{BE}{DA} \quad (\text{since } AB = AD). \]
This confirms the proportionality condition. ✓
Step 4: Conclude by SAS similarity.
In △ABE and △BDA:
The included angles are equal: ∠ABE = ∠BDA (shown above).
The sides about these equal angles are proportional: \[ \frac{AB}{BD} = \frac{BE}{DA}. \]
By the SAS similarity criterion, \[ \triangle ABE \sim \triangle BDA. \]
Answer: \( \triangle ABE \sim \triangle BDA \) by SAS similarity.
Question: In the given figure, \(\angle 1 = \angle 2\) and \(\dfrac{AB}{AC} = \dfrac{AD}{AE}\). Prove that \(\triangle ABD \sim \triangle ACE\). (Here \(\angle 1\) and \(\angle 2\) are the base angles at \(B\) and \(C\) of triangle \(ABC\), and \(D\), \(E\) are points on \(AB\) and \(AC\) respectively extended, with \(A\) as the vertex of the common angle.)
More precisely: In \(\triangle ABC\), \(\angle ABD = \angle 1\) and \(\angle ACE = \angle 2\). Given that \(\angle 1 = \angle 2\) and \(\dfrac{AB}{AC} = \dfrac{AD}{AE}\), and that \(\angle A\) is common to both \(\triangle ABD\) and \(\triangle ACE\), prove that \(\triangle ABD \sim \triangle ACE\).
Answer: Since \(\angle 1 = \angle 2\) implies \(AB = AC\) in \(\triangle ABC\), and using the given ratio \(\dfrac{AB}{AC} = \dfrac{AD}{AE}\) along with the common angle \(\angle A\), by the SAS similarity criterion we conclude \(\triangle ABD \sim \triangle ACE\).