SOLVER7 Study. Nothing Else.
Figure It Out 4 Q9

A tap takes \(15\) seconds to fill a mug of water. The volume of the mug is \(500\ mL.\) How much time does the same tap take to fill a bucket of water if the bucket has a \(10\)-litre capacity\(?\)

CBSE Class 8 Maths · Proportional Reasoning - 1

Solution

👶 Simple Explanation

Simple Explanation

Imagine a tap filling cups of water one by one at a steady pace. A small mug fills up quickly, but a big bucket needs much more time. The tap never speeds up or slows down, so more water always means more time. We know the tap fills a 500 mL mug in 15 seconds. A 10-litre bucket holds 20 times as much water, so it takes 20 times as long. That gives us 300 seconds, which is exactly 5 minutes.

Answer: The tap takes \( 300 \) seconds, that is \( 5 \) minutes, to fill the 10-litre bucket.

📖 Filling a Bucket Using Direct Proportion

Detailed Explanation

This problem is about direct proportion. When a tap fills water at a steady (constant) rate, the volume of water filled and the time taken increase together in the same ratio. If the volume becomes larger, the time becomes larger by the same factor. So volume and time are in direct proportion, meaning \( \frac{\text{volume}}{\text{time}} \) stays constant. Before comparing, we must make sure both volumes are in the same unit. Here the mug is measured in millilitres and the bucket in litres, so we first convert litres to millilitres using \( 1 \text{ litre} = 1000 \text{ mL} \).

Formula Used

For direct proportion: \( \frac{V_1}{t_1} = \frac{V_2}{t_2} \), where \( V \) is volume and \( t \) is time.

Solution

  1. Step 1: Write down what is given. The tap fills \( V_1 = 500 \text{ mL} \) in \( t_1 = 15 \text{ seconds} \). We want the time \( t_2 \) to fill a bucket of capacity \( 10 \) litres.
  2. Step 2: Convert the bucket's capacity to the same unit as the mug. Since \( 1 \text{ litre} = 1000 \text{ mL} \), we get \[ V_2 = 10 \times 1000 = 10000 \text{ mL} \] This is important because both volumes must be in mL before we compare them.
  3. Step 3: Since the tap fills at a constant rate, volume and time are in direct proportion: \[ \frac{V_1}{t_1} = \frac{V_2}{t_2} \] Substituting the values: \[ \frac{500}{15} = \frac{10000}{t_2} \]
  4. Step 4: Solve for \( t_2 \) by cross-multiplying: \[ 500 \times t_2 = 15 \times 10000 \] \[ 500 \times t_2 = 150000 \] \[ t_2 = \frac{150000}{500} = 300 \]
  5. Step 5: Convert the answer into minutes to understand it better. \[ 300 \text{ seconds} = \frac{300}{60} = 5 \text{ minutes} \] So the tap takes 300 seconds, which is 5 minutes.

Final Answer

The tap takes \( 300 \) seconds, that is \( 5 \) minutes, to fill the 10-litre bucket.

Common Mistake

A very common mistake is forgetting to convert litres to millilitres and directly writing \( \frac{500}{15} = \frac{10}{t_2} \). Mixing up units (mL with litres) gives a completely wrong answer, so always convert both volumes to the same unit first.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: List the known information. The tap fills a mug of capacity \( V_1 = 500 \text{ mL} \) in \( t_1 = 15 \) seconds. We need to find the time \( t_2 \) to fill a bucket of capacity \( 10 \) litres. — Reason: Identifying what is given and what is unknown keeps the solution organised and prevents confusion later.
  2. Step 2: Convert the bucket's capacity from litres to millilitres using \( 1 \text{ litre} = 1000 \text{ mL} \): \[ V_2 = 10 \times 1000 = 10000 \text{ mL} \] — Reason: Both volumes must be in the same unit before we can compare them; mixing mL and litres would give a wrong answer.
  3. Step 3: Since the tap fills at a constant rate, volume and time vary in direct proportion. Set up the proportion: \[ \frac{V_1}{t_1} = \frac{V_2}{t_2} \] Substituting the known values: \[ \frac{500}{15} = \frac{10000}{t_2} \] — Reason: A constant flow rate means the ratio of volume to time never changes, which is the definition of direct proportion.
  4. Step 4: Cross-multiply to remove the fractions: \[ 500 \times t_2 = 15 \times 10000 \] — Reason: Cross-multiplication is the standard algebraic move to isolate the unknown when it appears in the denominator of a proportion.
  5. Step 5: Simplify the right-hand side: \[ 500 \times t_2 = 150000 \] — Reason: Computing \( 15 \times 10000 \) gives \( 150000 \), making the next step straightforward.
  6. Step 6: Divide both sides by \( 500 \) to find \( t_2 \): \[ t_2 = \frac{150000}{500} = 300 \text{ seconds} \] — Reason: Dividing both sides by the coefficient of \( t_2 \) isolates the unknown on one side.
  7. Step 7: Convert seconds to minutes for a more meaningful answer. Since \( 1 \text{ minute} = 60 \text{ seconds} \): \[ t_2 = \frac{300}{60} = 5 \text{ minutes} \] — Reason: Expressing the answer in minutes gives a clearer real-life understanding of how long the tap takes to fill the bucket.

Final Answer

The tap takes \( 300 \) seconds, that is \( 5 \) minutes, to fill the 10-litre bucket.

Common Mistake

One common mistake: students forget to convert the bucket's capacity from litres to millilitres before setting up the proportion, which gives an answer 1000 times too small.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given: \( V_1 = 500 \text{ mL},\ t_1 = 15 \text{ s},\ V_2 = 10 \times 1000 = 10000 \text{ mL},\ t_2 = ? \)
  2. Step 2: Applying direct proportion: \[ \frac{500}{15} = \frac{10000}{t_2} \]
  3. Step 3: Cross-multiplying: \[ t_2 = \frac{15 \times 10000}{500} = \frac{150000}{500} = 300 \text{ s} = 5 \text{ minutes} \]

Answer: The tap takes \( 300 \) seconds, that is \( 5 \) minutes, to fill the 10-litre bucket.

➕ More Examples

More Examples

Example 1

Question: A pipe takes 20 seconds to fill a small jug of capacity 400 mL. How much time will the same pipe take to fill a water tank of capacity 6 litres?

Solution: Step 1: Convert the tank's capacity to mL. We know that 1 litre = 1000 mL, so 6 litres = \( 6 \times 1000 = 6000 \) mL. Step 2: Using the unitary method, find the time to fill 1 mL. The pipe fills 400 mL in 20 seconds, so time to fill 1 mL is \( \frac{20}{400} \) seconds. Step 3: Find the time to fill 6000 mL. Time = \[ \frac{20}{400} \times 6000 \] Simplifying: \[ = \frac{20 \times 6000}{400} = \frac{120000}{400} = 300 \text{ seconds} \] Converting to minutes: \[ 300 \div 60 = 5 \text{ minutes} \]

Answer: The pipe takes 300 seconds, i.e., 5 minutes, to fill the 6-litre tank.

Example 2

Question: A garden hose takes 12 seconds to fill a small pot of capacity 600 mL. How long will the same hose take to fill a large drum of capacity 18 litres? Give your answer in minutes.

Solution: Step 1: Convert the drum's capacity to mL. Since 1 litre = 1000 mL, 18 litres = \( 18 \times 1000 = 18000 \) mL. Step 2: The hose fills 600 mL in 12 seconds. Using direct proportion, set up the equation. Let the time to fill 18000 mL be \( t \) seconds. Then: \[ \frac{12}{600} = \frac{t}{18000} \] Solving for \( t \): \[ t = \frac{12 \times 18000}{600} \] \[ t = \frac{216000}{600} = 360 \text{ seconds} \] Step 3: Convert seconds to minutes: \[ 360 \div 60 = 6 \text{ minutes} \]

Answer: The hose takes 360 seconds, i.e., 6 minutes, to fill the 18-litre drum.

🎯 Try a Similar Question

Try a Similar Question

Question: A garden hose takes 20 seconds to fill a small watering can of capacity 800 mL. How much time will the same hose take to fill a large drum of capacity 24 litres?

Solution

  1. Step 1: Convert units to make them consistent: The watering can has a capacity of 800 mL. The drum has a capacity of 24 litres. Convert the drum's capacity to mL: \[24 \text{ litres} = 24 \times 1000 \text{ mL} = 24000 \text{ mL}\]
  2. Step 2: Find the time to fill 1 mL (Unitary Method): The hose takes 20 seconds to fill 800 mL. So the time to fill 1 mL is: \[\text{Time for 1 mL} = \frac{20}{800} \text{ seconds}\]
  3. Step 3: Find the time to fill 24000 mL: Time to fill the drum of 24000 mL: \[\text{Time} = \frac{20}{800} \times 24000\] Simplifying: \[\text{Time} = \frac{20 \times 24000}{800} = \frac{480000}{800} = 600 \text{ seconds}\]
  4. Step 4: Convert seconds to minutes: Since there are 60 seconds in 1 minute: \[600 \text{ seconds} = \frac{600}{60} \text{ minutes} = 10 \text{ minutes}\]
  5. Step 5: Verify using direct proportion: Volume and time are in direct proportion, so: \[\frac{\text{Time}_1}{\text{Volume}_1} = \frac{\text{Time}_2}{\text{Volume}_2}\] Substituting the known values: \[\frac{20}{800} = \frac{\text{Time}_2}{24000}\] Solving for Time\(_2\): \[\text{Time}_2 = \frac{20 \times 24000}{800} = 600 \text{ seconds} = 10 \text{ minutes}\]

Answer: The hose takes \( 600 \) seconds, that is \( 10 \) minutes, to fill the 24-litre drum.

Everything you get with Solver7

More questions in Proportional Reasoning - 1