SOLVER7 Study. Nothing Else.
Problem Set 9 Q7

In the adjoining figure circles with centres \(X\) and \(Y\) touch each other at point \(Z.\) A secant passing through \(Z\) intersects the circles at points \(A\) and \(B\) respectively. Prove that, radius \(XA \parallel\) radius \(YB.\) Fill in the blanks and complete the proof.
\(\text{Construction:}\) Draw segments \(XZ\) and .......... .
\(\text{Proof} :\) By theorem of touching circles, points \(X, Z, Y\) are .......... .
\(\therefore \angle XZA\cong...........\)opposite angles
\(\begin{aligned}\text{Let} \angle XZA=\angle BZY=a&&......(I)\end{aligned}\)
\(\begin{aligned} \text{Now, seg XA }\cong \text{seg XZ} && ..........(.......)\end{aligned}\)
\(\begin{aligned}\therefore \angle XAZ=........=a&& .......\text{(isosceles triangle theorem)(II)}\end{aligned}\)
\(\begin{aligned}\text{similarly, seg YB}\cong ........&& ........... (........)\end{aligned}\)
\(\begin{aligned}\therefore \angle BZY=...........=a&&.........(.........)\text{(II)}\end{aligned}\)
\(\begin{aligned}\therefore \text{from (I), (II), (III),}\end{aligned}\)
\(\begin{aligned}\angle XAZ=.......\end{aligned}\)
\(\begin{aligned}\therefore \text{radius XA}\parallel \text{ radius YB}...........(..........)\end{aligned}\)

MAH STATE BOARD Mah SB Class 10 Maths · Circle

Solution

👶 Simple Explanation

Simple Explanation

Imagine two hula hoops touching each other at one point. The centres of the hoops and the touching point always line up in a straight row. Now draw a line from each centre to the touching point. Because both lines go to the same touching spot, they create equal crossing angles there. Each centre-to-edge line is like a spoke of a wheel, so it makes an equal triangle inside its hoop. Those equal triangles give equal angles, which means both spokes end up pointing in the same direction — they are perfectly parallel!

Answer: Blanks filled: Construction - seg YZ; points X, Z, Y are collinear; \(\angle XZA \cong \angle BZY\) (vertically opposite angles); seg XA \(\cong\) seg XZ (radii of the same circle); \(\angle XAZ = \angle XZA = a\); seg YB \(\cong\) seg YZ (radii of the same circle); \(\angle BZY = \angle YBZ = a\); \(\angle XAZ = \angle YBZ\); therefore radius XA \(\parallel\) radius YB (alternate angles test).

📖 Touching Circles - Parallel Radii Proof

Detailed Explanation

When two circles touch each other (externally or internally), the point of contact lies on the line joining their centres. This is called the 'theorem of touching circles'. So the three points X, Z, Y are collinear. Also, a radius drawn to any point on a circle equals other radii of the same circle, which creates isosceles triangles. Using these two facts together with the property of vertically opposite angles, we can show that the alternate interior angles formed by line AB (the transversal) with radii XA and YB are equal, hence XA is parallel to YB.

Formula Used

Key facts used: (1) Theorem of touching circles - centres and point of contact are collinear. (2) Isosceles triangle theorem - angles opposite to equal sides are equal. (3) Alternate angles test - if a transversal makes a pair of equal alternate angles with two lines, then the lines are parallel.

Solution

  1. Construction: Draw segments XZ and YZ (joining each centre to the point of contact Z).
  2. Collinearity of X, Z, Y: By the theorem of touching circles, the points X, Z, Y are collinear (they lie on one straight line through the point of contact).
  3. Vertically opposite angles: Since X, Z, Y are collinear and A, Z, B are collinear (A-Z-B is a straight secant), the two lines XY and AB intersect at Z. Therefore \(\angle XZA \cong \angle BZY\) (vertically opposite angles). Let \(\angle XZA = \angle BZY = a\) ......(I)
  4. Isosceles triangle in first circle: In the circle with centre X, both XA and XZ are radii of the same circle. Therefore \(\text{seg } XA \cong \text{seg } XZ\) (radii of the same circle). Hence triangle XAZ is isosceles, so \(\angle XAZ = \angle XZA = a\) (isosceles triangle theorem) ......(II)
  5. Isosceles triangle in second circle: Similarly, in the circle with centre Y, \(\text{seg } YB \cong \text{seg } YZ\) (radii of the same circle). Therefore triangle YBZ is isosceles, so \(\angle BZY = \angle YBZ = a\) (isosceles triangle theorem) ......(III)
  6. Combining the results: From (I), (II) and (III): \(\angle XAZ = \angle YBZ = a\). These are a pair of alternate interior angles formed by the transversal AB cutting the lines XA and YB.
  7. Conclusion: Since a pair of alternate angles is equal, radius \(XA \parallel\) radius \(YB\) (alternate angles test for parallel lines).

Final Answer

Blanks filled: Construction - seg YZ; points X, Z, Y are collinear; \(\angle XZA \cong \angle BZY\) (vertically opposite angles); seg XA \(\cong\) seg XZ (radii of the same circle); \(\angle XAZ = \angle XZA = a\); seg YB \(\cong\) seg YZ (radii of the same circle); \(\angle BZY = \angle YBZ = a\); \(\angle XAZ = \angle YBZ\); therefore radius XA \(\parallel\) radius YB (alternate angles test).

Common Mistake

A very common mistake is forgetting to state that X, Z, Y are collinear (theorem of touching circles). Without collinearity, the angles \(\angle XZA\) and \(\angle BZY\) cannot be called vertically opposite angles, and the whole proof breaks down.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Construction: Draw seg XZ and seg YZ, joining each centre to the point of contact Z. — Reason: These segments are radii and will help us identify the isosceles triangles needed for the proof.
  2. Step 2: Establish Collinearity: By the theorem of touching circles, when two circles touch each other, their centres and the point of contact lie on one straight line. Therefore points X, Z, Y are collinear. — Reason: This collinearity is the foundation that lets us identify vertically opposite angles at Z.
  3. Step 3: Identify Vertically Opposite Angles: Line XY and line AB intersect at Z (since X, Z, Y are collinear and A, Z, B are collinear). At this intersection, \( \angle XZA \) and \( \angle BZY \) are vertically opposite angles, so \( \angle XZA \cong \angle BZY \). Let \( \angle XZA = \angle BZY = a \). — Reason: Vertically opposite angles are always equal; naming them both \( a \) lets us track the same value through both triangles.
  4. Step 4: Isosceles Triangle in Circle with Centre X: In the circle with centre X, seg XA and seg XZ are both radii, so \( \text{seg } XA \cong \text{seg } XZ \). Triangle XAZ is therefore isosceles. By the isosceles triangle theorem, the base angles are equal: \( \angle XAZ = \angle XZA = a \). — Reason: Equal sides produce equal base angles, giving us the angle at A in terms of \( a \).
  5. Step 5: Isosceles Triangle in Circle with Centre Y: In the circle with centre Y, seg YB and seg YZ are both radii, so \( \text{seg } YB \cong \text{seg } YZ \). Triangle YBZ is therefore isosceles. By the isosceles triangle theorem: \( \angle BZY = \angle YBZ = a \). — Reason: The same logic applied to the second circle gives us the angle at B also equal to \( a \).
  6. Step 6: Compare the Two Angles: From Steps 4 and 5, \( \angle XAZ = a \) and \( \angle YBZ = a \), so \( \angle XAZ = \angle YBZ \). — Reason: Both angles equal \( a \), making them an equal pair of alternate interior angles formed by transversal AB with lines XA and YB.
  7. Step 7: Conclude Parallelism: Since transversal AB (line through A, Z, B) makes equal alternate interior angles with radius XA and radius YB, by the alternate angles test, radius XA \( \parallel \) radius YB. — Reason: The alternate angles test states that equal alternate angles formed by a transversal guarantee that the two lines are parallel.

Final Answer

Blanks filled: Construction - seg YZ; points X, Z, Y are collinear; \(\angle XZA \cong \angle BZY\) (vertically opposite angles); seg XA \(\cong\) seg XZ (radii of the same circle); \(\angle XAZ = \angle XZA = a\); seg YB \(\cong\) seg YZ (radii of the same circle); \(\angle BZY = \angle YBZ = a\); \(\angle XAZ = \angle YBZ\); therefore radius XA \(\parallel\) radius YB (alternate angles test).

Common Mistake

One common mistake: Students often forget to justify why X, Z, Y are collinear — simply saying 'they look collinear on the diagram' is not enough; you must explicitly cite the theorem of touching circles to earn the mark.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Construction and Collinearity: Draw seg YZ. By the theorem of touching circles, X, Z, Y are collinear.
  2. Step 2: Vertically Opposite Angles: Lines XY and AB intersect at Z, so \(\angle XZA \cong \angle BZY\). Let each equal \(a\).
  3. Step 3: Isosceles Triangles: In circle with centre X: seg XA \(\cong\) seg XZ (radii), so \(\angle XAZ = \angle XZA = a\). In circle with centre Y: seg YB \(\cong\) seg YZ (radii), so \(\angle YBZ = \angle BZY = a\).
  4. Step 4: Parallel Radii: \(\angle XAZ = \angle YBZ = a\) — equal alternate angles with transversal AB, therefore radius XA \(\parallel\) radius YB.

Answer: Blanks filled: Construction - seg YZ; points X, Z, Y are collinear; \(\angle XZA \cong \angle BZY\) (vertically opposite angles); seg XA \(\cong\) seg XZ (radii of the same circle); \(\angle XAZ = \angle XZA = a\); seg YB \(\cong\) seg YZ (radii of the same circle); \(\angle BZY = \angle YBZ = a\); \(\angle XAZ = \angle YBZ\); therefore radius XA \(\parallel\) radius YB (alternate angles test).

➕ More Examples

More Examples

Example 1

Question: Two circles with centres P and Q touch each other externally at point T. A straight line (secant) through T meets the first circle again at point C and the second circle again at point D. Prove that radius PC is parallel to radius QD. \nConstruction: Draw segments PT and QT. \nFill in the blanks and complete the proof: \nProof: By the theorem of touching circles, points P, T, Q are __________. \nHence, \(\angle PCT\) and \(\angle DQT\) are base angles of isosceles triangles. Let \(\angle PTС = \angle DTQ = b\) (vertically opposite angles). \nSince seg PC \(=\) seg PT (radii of circle with centre P), triangle PCT is isosceles. \nTherefore \(\angle PCT = \angle PTC = b\). \nSimilarly, seg QD \(=\) seg QT (radii of circle with centre Q), triangle QDT is isosceles. \nTherefore \(\angle QDT = \angle QTD = b\). \nHence \(\angle PCT = \angle QDT = b\). \nSince these are alternate interior angles formed by transversal CD with lines PC and QD, prove that PC \(\parallel\) QD.

Solution: Construction: Draw segments PT and QT. \nStep 1: By the theorem of touching circles, when two circles touch at T, their centres P and Q and the point T are collinear (P, T, Q lie on the same straight line). \nStep 2: The line CTD is a straight line through T. Since P, T, Q are collinear, \(\angle PTC\) and \(\angle QTD\) are vertically opposite angles. \nTherefore \(\angle PTC = \angle QTD\). \nLet \(\angle PTC = \angle QTD = b\) ... (I) \nStep 3: In triangle PCT, seg PC \(=\) seg PT (both are radii of the circle with centre P). \nBy the Isosceles Triangle Theorem: \(\angle PCT = \angle PTC = b\) ... (II) \nStep 4: In triangle QDT, seg QD \(=\) seg QT (both are radii of the circle with centre Q). \nBy the Isosceles Triangle Theorem: \(\angle QDT = \angle QTD = b\) ... (III) \nStep 5: From (I), (II), and (III): \[\angle PCT = \angle QDT = b\] \nThese angles \(\angle PCT\) and \(\angle QDT\) are alternate interior angles formed by the transversal CD cutting lines PC and QD. \nSince alternate interior angles are equal, we conclude: \[PC \parallel QD\] \nHence, radius PC is parallel to radius QD.

Answer: Radius PC is parallel to radius QD, proved using collinearity of P, T, Q; vertically opposite angles; isosceles triangle theorem; and the alternate interior angles test for parallel lines.

Example 2

Question: Two circles with centres M and N touch each other internally at point K. A secant through K meets the smaller circle at point E and the larger circle at point F (on the same side). Prove that radius ME is parallel to radius NF. \nConstruction: Draw segments MK and NK. \nUse the following outline to complete the proof: (i) State the positional relationship among M, K, N. (ii) Identify the pair of equal angles at K. (iii) Use the isosceles triangle property in triangles MEK and NFK. (iv) Conclude that ME \(\parallel\) NF by stating the appropriate parallel line test used.

Solution: Construction: Draw segments MK and NK. \nStep 1 (Collinearity): By the theorem of touching circles, when two circles touch (internally) at K, the centres M and N and the point K are collinear, i.e., M, K, N lie on the same straight line. \nStep 2 (Angles at K): The secant EKF is a straight line. Since M, K, N are collinear, the line MN extended is also a straight line through K. \nAngles \(\angle MKE\) and \(\angle NKF\) are vertically opposite angles (formed at K between line MN and secant EF). \nTherefore \(\angle MKE = \angle NKF\). \nLet \(\angle MKE = \angle NKF = c\) ... (I) \nStep 3 (Isosceles triangle MEK): In triangle MEK, seg ME \(=\) seg MK (radii of circle with centre M). \nBy the Isosceles Triangle Theorem: \[\angle MEK = \angle MKE = c\] ... (II) \nStep 4 (Isosceles triangle NFK): In triangle NFK, seg NF \(=\) seg NK (radii of circle with centre N). \nBy the Isosceles Triangle Theorem: \[\angle NFk = \angle NKF = c\] ... (III) \nStep 5 (Conclusion): From (I), (II), and (III): \[\angle MEK = \angle NFk = c\] \nAngles \(\angle MEK\) and \(\angle NFk\) are alternate interior angles formed by transversal EF with lines ME and NF. \nSince alternate interior angles are equal: \[ME \parallel NF\] \nHence, radius ME is parallel to radius NF.

Answer: Radius ME is parallel to radius NF, proved by showing M, K, N are collinear; using vertically opposite angles at K; applying the isosceles triangle theorem to both triangles; and using the alternate interior angles test for parallel lines.

🎯 Try a Similar Question

Try a Similar Question

Question: Two circles with centres P and Q touch each other externally at point T. A straight line (secant) passing through T meets the first circle at point C and the second circle at point D. Prove that radius PC is parallel to radius QD. Complete the proof by filling in the reasoning at each stage. Construction: Draw segments PT and ________. Proof: By the theorem of touching circles, points P, T, Q are ________. Therefore \ \angle PTС and \ \angle DTQ are ________ angles. Let \ \angle PTC = \ \angle DTQ = b \ \ldots (I). Now, seg PC \ \cong seg PT (________), so \ \angle PCT = \ \angle PTC = b \ \ldots (II). Similarly, seg QD \ \cong seg QT (________), so \ \angle QDT = \ \angle QTD = b \ \ldots (III). From (I), (II), (III): \ \angle PCT = \ \angle QDT. Therefore radius PC \ \parallel radius QD by the ________ test.

Solution

  1. Step 1 – Construction: Draw segment PT (radius of the first circle to point T) and segment QT (radius of the second circle to point T).
  2. Step 2 – Collinearity of centres: By the theorem of touching circles, when two circles touch each other at point T, the two centres and the point of contact are collinear. Therefore P, T, Q are collinear, meaning P, T, Q lie on the same straight line.
  3. Step 3 – Vertically opposite angles: Since P, T, Q are collinear, the line PTQ is a straight line. The secant CTD passes through T. Hence \ \( \angle PTC \) and \ \( \angle QTD \) are vertically opposite angles. Let \ \( \angle PTC = \angle QTD = b \) ... (I).
  4. Step 4 – Isosceles triangle with centre P: In triangle PCT, seg PC and seg PT are both radii of the circle with centre P. Therefore seg PC \ \( \cong \) seg PT (radii of the same circle). By the isosceles triangle theorem, \ \( \angle PCT = \angle PTC = b \) ... (II).
  5. Step 5 – Isosceles triangle with centre Q: In triangle QDT, seg QD and seg QT are both radii of the circle with centre Q. Therefore seg QD \ \( \cong \) seg QT (radii of the same circle). By the isosceles triangle theorem, \ \( \angle QDT = \angle QTD = b \) ... (III).
  6. Step 6 – Conclusion: From (I), (II), and (III), we have \ \( \angle PCT = \angle QDT = b \). These are alternate interior angles formed by the transversal CD cutting lines PC and QD. Since the alternate angles are equal, radius PC \ \( \parallel \) radius QD (by the Alternate Angles Test).

Answer: Construction: Draw seg QT. P, T, Q are collinear. \( \angle PTC \) and \( \angle QTD \) are vertically opposite angles, so \( \angle PTC = \angle QTD = b \) ... (I). seg PC \( \cong \) seg PT (radii of the same circle), so \( \angle PCT = \angle PTC = b \) ... (II). seg QD \( \cong \) seg QT (radii of the same circle), so \( \angle QDT = \angle QTD = b \) ... (III). Therefore \( \angle PCT = \angle QDT \), and hence radius PC \( \parallel \) radius QD (Alternate Angles Test).

Everything you get with Solver7

More questions in Circle

Chapter 9 Examples Q1 Practice Set 9.1 Q1 (i) Practice Set 9.2 Q1 Practice Set 9.3 Q1 Practice Set 9.4 Q1 (i) Practice Set 9.5 Q1 Problem Set 9 Q1 (i) 03/2018 2018 / Question 4 Q1 03/2019 2019 / Question 5 Q1 N397 2024 / Question 2 QA (i) N397 2024 / Question 5 Q1 N397 2026 / Question 2 QA (i) N397 2026 / Question 5 Q1 (a) N632 2024 / Question 2 QA (i) N723 2022 / Question 3 QA (i) N832 2025 / Question 2 QA (i) N832 2025 / Question 5 Q1 N926 2023 / Question 2 QA (i) N926 2023 / Question 5 Q1 N932 2026 / Question 2 QA (i) N932 2026 / Question 5 Q1 (a) Chapter 9 Examples Q2 Practice Set 9.1 Q1 (ii) Practice Set 9.2 Q2 Practice Set 9.3 Q2 (i) Practice Set 9.4 Q1 (ii) Practice Set 9.5 Q2 (i) Problem Set 9 Q1 (ii) 03/2018 2018 / Question 1 Q2 03/2018 2018 / Question 2 Q2 03/2019 2019 / Question 3 QA (ii) 03/2019 2019 / Question 4 Q2 (a) N397 2024 / Question 1 QA (ii) N397 2026 / Question 1 QA (ii) N397 2026 / Question 5 Q1 (b) N632 2024 / Question 3 QA (ii) N697 2025 / Question 1 QA (ii) N697 2025 / Question 2 QA (ii) N697 2025 / Question 3 QA (ii) N723 2022 / Question 1 QA (ii) N723 2022 / Question 4 Q2 N832 2025 / Question 1 QA (ii) N832 2025 / Question 2 QA (ii) N926 2023 / Question 1 QA (ii) N932 2026 / Question 1 QA (ii) N932 2026 / Question 5 Q1 (b) Practice Set 9.1 Q1 (iii) Practice Set 9.2 Q3 (i) Chapter 9 Examples Q3 (i) Practice Set 9.3 Q2 (ii) Practice Set 9.4 Q1 (iii) Practice Set 9.5 Q2 (ii) Problem Set 9 Q1 (iii) 03/2019 2019 / Question 1 QA (iii) 03/2019 2019 / Question 4 Q2 (b) N397 2024 / Question 3 QB (i) N397 2026 / Question 2 QA (iii) N397 2026 / Question 5 Q1 (c) N632 2024 / Question 4 Q3 N697 2025 / Question 2 QA (iii)