SOLVER7 Study. Nothing Else.
2026 Board Paper Q1 (a)

\(AB\) is a chord of a circle with centre \(O.\) \(AC\) is a diameter of a circle. Line \(AT\) is a tangent at \(A.\) Write the answers of the following questions :
Draw the figure using the given information.

MAH STATE BOARD Mah SB Class 10 Maths · Circle

Solution

👶 Simple Explanation

Simple Explanation

Imagine drawing a circle like a clock face. A chord is just a straight line connecting two dots on the edge of the circle. A diameter is a special chord that goes right through the middle. Now, at one end of that diameter, draw a flat line touching the circle at just that one dot. That touching line is called a tangent. It always stands perfectly sideways, making a corner shape with the diameter. That corner shape means they are perpendicular to each other.

Answer: The required figure has a circle with centre \( O \), chord \( AB \), diameter \( AC \) passing through \( O \), and tangent \( AT \) at point \( A \) such that \( AT \perp AC \).

📖 Drawing the Figure: Chord, Diameter, and Tangent

Detailed Explanation

To draw this figure, we need to understand three important terms related to a circle. A chord is a line segment whose endpoints lie on the circle. A diameter is a special chord that passes through the centre of the circle. A tangent is a straight line that touches the circle at exactly one point, called the point of contact. An important property of a tangent is that it is always perpendicular to the radius drawn to the point of contact. Since the diameter passes through the centre, the tangent at one end of the diameter is perpendicular to that diameter.

Formula Used

Key property used: The tangent at any point of a circle is perpendicular to the radius (or diameter) through the point of contact, i.e. \( AT \perp AC \) at point \( A \).

Solution

  1. Step 1: Draw a circle with centre \( O \) of any convenient radius using a compass.
  2. Step 2: Mark a point \( A \) on the circle. From \( A \), draw a straight line passing through the centre \( O \) and extend it to meet the circle again at point \( C \). The segment \( AC \) is the diameter of the circle.
  3. Step 3: Mark another point \( B \) anywhere on the circle (different from \( A \) and \( C \)). Join \( A \) and \( B \) with a straight line. The segment \( AB \) is the chord of the circle.
  4. Step 4: At point \( A \), draw a line \( AT \) such that \( AT \) is perpendicular to the diameter \( AC \). This line \( AT \) is the tangent to the circle at point \( A \), because the tangent at a point is perpendicular to the radius through that point.
  5. Step 5: Label the figure clearly with points \( O \) (centre), \( A \), \( B \), \( C \), and \( T \). The final figure shows the circle with chord \( AB \), diameter \( AC \), and tangent \( AT \) at \( A \), where \( \angle TAC = 90^\circ \).

Final Answer

The required figure has a circle with centre \( O \), chord \( AB \), diameter \( AC \) passing through \( O \), and tangent \( AT \) at point \( A \) such that \( AT \perp AC \).

Common Mistake

A common mistake is drawing the tangent \( AT \) at an angle other than \( 90^\circ \) to the diameter \( AC \). Remember, the tangent at the point of contact must always be perpendicular to the radius (or diameter) at that point.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Using a compass, draw a circle of any convenient radius and label its centre \( O \). — Reason: The centre \( O \) is needed so we can accurately draw the diameter and the radius to the point of tangency.
  2. Step 2: Mark a point \( A \) anywhere on the circumference of the circle. — Reason: Point \( A \) will serve as the point of contact for the tangent as well as one endpoint of both the diameter and the chord.
  3. Step 3: Draw a straight line starting from \( A \), passing through the centre \( O \), and extending until it meets the circle again at a point; label this second point \( C \). The segment \( AC \) is the diameter of the circle. — Reason: A diameter must pass through the centre, so routing the line through \( O \) guarantees that \( AC \) is a true diameter.
  4. Step 4: Mark a third point \( B \) on the circle, choosing it so that \( B \) is different from both \( A \) and \( C \). Join \( A \) to \( B \) with a straight line segment. The segment \( AB \) is a chord of the circle. — Reason: A chord is defined as a line segment whose two endpoints both lie on the circle, which is exactly what \( AB \) satisfies.
  5. Step 5: At point \( A \), construct a line \( AT \) such that \( AT \perp AC \) (i.e., \( AT \) makes a \( 90^\circ \) angle with the diameter \( AC \)). This line \( AT \) is the tangent to the circle at \( A \). — Reason: The fundamental property of a tangent states that it is perpendicular to the radius (or diameter) at the point of contact. Since \( OA \) is part of the diameter \( AC \), drawing \( AT \perp AC \) at \( A \) automatically makes \( AT \) the required tangent.

Final Answer

The required figure has a circle with centre \( O \), chord \( AB \), diameter \( AC \) passing through \( O \), and tangent \( AT \) at point \( A \) such that \( AT \perp AC \).

Common Mistake

One common mistake: Students sometimes draw the tangent \( AT \) perpendicular to the chord \( AB \) instead of perpendicular to the diameter \( AC \). Remember, the tangent at a point is always perpendicular to the radius (or diameter) at that specific point of contact, not to any other chord.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Draw a circle with centre \( O \) and mark point \( A \) on it.
  2. Step 2: Draw diameter \( AC \) through \( O \); mark point \( B \) on the circle and draw chord \( AB \).
  3. Step 3: At \( A \), draw tangent \( AT \) such that \( AT \perp AC \).

Answer: The required figure has a circle with centre \( O \), chord \( AB \), diameter \( AC \) passing through \( O \), and tangent \( AT \) at point \( A \) such that \( AT \perp AC \).

➕ More Examples

More Examples

Example 1

Question: PQ is a chord of a circle with centre O. PR is a diameter of the circle. Line PT is a tangent to the circle at P. Given that angle QPR = 35°, find: (i) angle OPQ, (ii) angle QPT, (iii) angle RPT.

Solution: Step 1: Identify the key relationships from the figure. \nSince PR is a diameter, O is the centre and P, O, R are collinear. The tangent PT is at point P, so OP is perpendicular to PT. \nStep 2: Find angle RPT. \nSince OPT (i.e., RPT) is the angle between the radius OP (along PR) and the tangent PT, by the tangent-radius property: \[\angle RPT = 90^\circ\] \nStep 3: Find angle QPT. \nAngle QPT = angle RPT - angle QPR \[\angle QPT = 90^\circ - 35^\circ = 55^\circ\] \nStep 4: Find angle OPQ. \nSince O is the centre and OP = OQ (both radii), triangle OPQ is isosceles. However, angle OPQ is the angle between the radius OP (part of diameter PR) and chord PQ. \nAngle OPQ = angle RPQ = angle QPR (same angle, as O lies on PR): \[\angle OPQ = 35^\circ\] \nStep 5: Verify using the figure that all angles are consistent with the geometry of the circle.

Answer: (i) angle OPQ = 35°, (ii) angle QPT = 55°, (iii) angle RPT = 90°

Example 2

Question: XY is a chord of a circle with centre O. XZ is a diameter of the circle. Line XL is a tangent to the circle at X. Given that angle YXZ = 42°, find: (i) angle ZXL, (ii) angle YXL, (iii) angle XZY.

Solution: Step 1: Note the given information. \nXZ is a diameter, so O is the midpoint of XZ. XL is a tangent at X, so OX is perpendicular to XL, meaning XZ is perpendicular to XL. \nStep 2: Find angle ZXL. \nBy the tangent-radius property, the tangent XL is perpendicular to the radius OX (which lies along XZ): \[\angle ZXL = 90^\circ\] \nStep 3: Find angle YXL. \nAngle YXL = angle ZXL + angle YXZ (if Y and L are on opposite sides of XZ) OR angle YXL = angle ZXL - angle YXZ (if Y is between Z-direction and L-direction). \nSince chord XY is inside the circle and angle YXZ = 42°, Y lies between Z and L in angular terms from X, so: \[\angle YXL = \angle ZXL + \angle YXZ = 90^\circ + 42^\circ\] \nWait — re-examining: angle ZXL = 90° is between diameter direction (XZ) and tangent (XL). Chord XY makes angle YXZ = 42° with the diameter on the same side as the circle. So Y is between the diameter and the tangent direction: \[\angle YXL = 90^\circ - 42^\circ = 48^\circ\] \nStep 4: Find angle XZY. \nSince XZ is the diameter, angle XYZ = 90° (angle in a semicircle). In triangle XYZ: \[\angle XZY + \angle ZXY + \angle XYZ = 180^\circ\] \nSubstituting the known values: \[\angle XZY + 42^\circ + 90^\circ = 180^\circ\] \[\angle XZY = 180^\circ - 132^\circ = 48^\circ\] \nStep 5: Observe that angle XZY = angle YXL = 48°, which illustrates the tangent-chord angle equals the angle in the alternate segment (Alternate Segment Theorem).

Answer: (i) angle ZXL = 90°, (ii) angle YXL = 48°, (iii) angle XZY = 48°

🎯 Try a Similar Question

Try a Similar Question

Question: PQ is a chord of a circle with centre O. PR is a diameter of the circle. The line PM is a tangent to the circle at point P. Using this information, draw a neat, labelled figure showing the circle, the chord PQ, the diameter PR passing through centre O, and the tangent PM at P. Also state the angle between PM and PR, giving a reason.

Solution

  1. Step 1: Draw the circle and mark the centre: Draw a circle and mark its centre as O.
  2. Step 2: Draw the diameter PR: Mark a point P on the circle. Draw a straight line through O from P to the opposite side of the circle and mark that endpoint as R. The segment PR is a diameter, so O lies on PR and \( PO = OR \) (both equal the radius).
  3. Step 3: Draw the chord PQ: Mark another point Q on the circle (not at R). Join P and Q with a straight line segment. PQ is a chord of the circle.
  4. Step 4: Draw the tangent PM at P: At point P, draw a straight line PM that touches the circle at exactly one point (P) and does not cross the circle. By the Tangent-Radius Theorem, PM must be drawn perpendicular to the radius OP (which lies along the diameter PR).
  5. Step 5: State and justify the angle between PM and PR: Since PM is a tangent at P and PR is a diameter (i.e., OP is the radius at P), by the Tangent-Radius Theorem, the tangent at any point is perpendicular to the radius at that point. Therefore, \( \angle MPR = 90^{\circ} \), meaning PM is perpendicular to PR.

Answer: The required figure has a circle with centre O, chord PQ, diameter PR passing through O, and tangent PM at point P, such that PM is perpendicular to PR, i.e., \( \angle MPR = 90^{\circ} \). This follows directly from the Tangent-Radius Theorem.

Everything you get with Solver7

More questions in Circle

Chapter 9 Examples Q1 Practice Set 9.1 Q1 (i) Practice Set 9.2 Q1 Practice Set 9.3 Q1 Practice Set 9.4 Q1 (i) Practice Set 9.5 Q1 Problem Set 9 Q1 (i) 03/2018 2018 / Question 4 Q1 03/2019 2019 / Question 5 Q1 N397 2024 / Question 2 QA (i) N397 2024 / Question 5 Q1 N397 2026 / Question 2 QA (i) N632 2024 / Question 2 QA (i) N723 2022 / Question 3 QA (i) N832 2025 / Question 2 QA (i) N832 2025 / Question 5 Q1 N926 2023 / Question 2 QA (i) N926 2023 / Question 5 Q1 N932 2026 / Question 2 QA (i) N932 2026 / Question 5 Q1 (a) Chapter 9 Examples Q2 Practice Set 9.1 Q1 (ii) Practice Set 9.2 Q2 Practice Set 9.3 Q2 (i) Practice Set 9.4 Q1 (ii) Practice Set 9.5 Q2 (i) Problem Set 9 Q1 (ii) 03/2018 2018 / Question 1 Q2 03/2018 2018 / Question 2 Q2 03/2019 2019 / Question 3 QA (ii) 03/2019 2019 / Question 4 Q2 (a) N397 2024 / Question 1 QA (ii) N397 2026 / Question 1 QA (ii) N397 2026 / Question 5 Q1 (b) N632 2024 / Question 3 QA (ii) N697 2025 / Question 1 QA (ii) N697 2025 / Question 2 QA (ii) N697 2025 / Question 3 QA (ii) N723 2022 / Question 1 QA (ii) N723 2022 / Question 4 Q2 N832 2025 / Question 1 QA (ii) N832 2025 / Question 2 QA (ii) N926 2023 / Question 1 QA (ii) N932 2026 / Question 1 QA (ii) N932 2026 / Question 5 Q1 (b) Practice Set 9.1 Q1 (iii) Practice Set 9.2 Q3 (i) Chapter 9 Examples Q3 (i) Practice Set 9.3 Q2 (ii) Practice Set 9.4 Q1 (iii) Practice Set 9.5 Q2 (ii) Problem Set 9 Q1 (iii) 03/2019 2019 / Question 1 QA (iii) 03/2019 2019 / Question 4 Q2 (b) N397 2024 / Question 3 QB (i) N397 2026 / Question 2 QA (iii) N397 2026 / Question 5 Q1 (c) N632 2024 / Question 4 Q3 N697 2025 / Question 2 QA (iii) N697 2025 / Question 4 Q3