SOLVER7 Study. Nothing Else.
2024 Board Paper Q3

Draw a circle with centre \(O\) having radius \(3\ cm.\) Draw tangent segments \(PA\) and \(PB\) through the point \(P\) outside the circle such that \(\angle APB=70^\circ.\)

MAH STATE BOARD Mah SB Class 10 Maths · Circle

Solution

👶 Simple Explanation

Simple Explanation

Imagine a circle like a round clock on a wall. Two straight roads touch the clock's edge and meet at a point outside it. The angle where the roads meet is like a gap between your two hands. When that gap is 70 degrees, the angle at the clock's centre must be 110 degrees, because together they always make 180 degrees. Drawing the two roads means placing them exactly at right angles to the clock's radius at each touching spot.

Answer: The required tangent segments \( PA \) and \( PB \) are drawn from external point \( P \) such that \( \angle APB = 70^\circ \), by first constructing \( \angle AOB = 110^\circ \) at the centre and then drawing perpendiculars to the radii at \( A \) and \( B \).

📖 Constructing Tangents from an External Point at a Given Angle

Detailed Explanation

A tangent to a circle is a line that touches the circle at exactly one point, called the point of contact. The radius drawn to the point of contact is always perpendicular to the tangent. From an external point, exactly two tangents can be drawn to a circle, and they are equal in length. If \( \angle APB \) is the angle between the two tangents from external point \( P \), then the angle \( \angle AOB \) at the centre (formed by the two radii to the points of contact) satisfies \( \angle APB + \angle AOB = 180^\circ \). This is because \( OAPB \) forms a quadrilateral where the two angles at the points of contact are each \( 90^\circ \). We use this property to construct tangents when the angle between them is given.

Formula Used

\[ \angle APB + \angle AOB = 180^\circ \] So if \( \angle APB = 70^\circ \), then \( \angle AOB = 180^\circ - 70^\circ = 110^\circ \).

Solution

  1. Step 1: Draw a circle with centre \( O \) and radius \( 3\ cm \) using a compass.
  2. Step 2: Calculate the central angle \( \angle AOB \). Since \( \angle APB + \angle AOB = 180^\circ \) and \( \angle APB = 70^\circ \), we get \[ \angle AOB = 180^\circ - 70^\circ = 110^\circ. \]
  3. Step 3: Draw any radius \( OA \) of the circle. Using a protractor at \( O \), measure an angle of \( 110^\circ \) from \( OA \) and draw another radius \( OB \). Points \( A \) and \( B \) lie on the circle and will be the points of contact of the two tangents.
  4. Step 4: At point \( A \), draw a line perpendicular to \( OA \) (since the tangent at any point of a circle is perpendicular to the radius through that point). Similarly, at point \( B \), draw a line perpendicular to \( OB \).
  5. Step 5: Extend these two perpendicular lines until they meet. Name the point of intersection \( P \). Then \( PA \) and \( PB \) are the required tangent segments.
  6. Step 6: Verify by measuring \( \angle APB \) with a protractor. It should measure \( 70^\circ \), confirming the construction is correct.

Final Answer

The required tangent segments \( PA \) and \( PB \) are drawn from external point \( P \) such that \( \angle APB = 70^\circ \), by first constructing \( \angle AOB = 110^\circ \) at the centre and then drawing perpendiculars to the radii at \( A \) and \( B \).

Common Mistake

A common mistake is taking \( \angle AOB = 70^\circ \) (same as \( \angle APB \)) instead of \( 110^\circ \). Remember that the angle between the tangents and the angle at the centre are supplementary, not equal.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Draw a circle with centre \( O \) and radius \( 3 \) cm using a compass. — Reason: This forms the base circle on which the points of tangency \( A \) and \( B \) will lie.
  2. Step 2: Find the required central angle using the supplementary relationship. Since \( \angle APB + \angle AOB = 180^\circ \) and the given angle between the tangents is \( \angle APB = 70^\circ \), we calculate: \[ \angle AOB = 180^\circ - 70^\circ = 110^\circ \] — Reason: The two right angles at \( A \) and \( B \) (where radius meets tangent) together account for \( 180^\circ \) of the quadrilateral \( OAPB \), so the remaining two angles \( \angle AOB \) and \( \angle APB \) must share the other \( 180^\circ \).
  3. Step 3: Draw any radius \( OA \). Then, using a protractor placed at centre \( O \), measure an angle of \( 110^\circ \) from \( OA \) and draw a second radius \( OB \) to mark another point \( B \) on the circle. — Reason: The two radii \( OA \) and \( OB \) must subtend exactly \( \angle AOB = 110^\circ \) at the centre so that the tangents at \( A \) and \( B \) will meet at the desired angle of \( 70^\circ \).
  4. Step 4: At point \( A \), construct a line perpendicular to radius \( OA \). This is done by drawing a \( 90^\circ \) angle at \( A \) with respect to \( OA \). — Reason: A tangent to a circle is always perpendicular to the radius at the point of contact, so the tangent at \( A \) must be at \( 90^\circ \) to \( OA \).
  5. Step 5: Similarly, at point \( B \), construct a line perpendicular to radius \( OB \) by drawing a \( 90^\circ \) angle at \( B \) with respect to \( OB \). — Reason: By the same tangent-radius property, the tangent at \( B \) must also be perpendicular to \( OB \) to ensure it touches the circle at exactly one point.
  6. Step 6: Extend both perpendicular lines until they meet at a point. Label this intersection point \( P \). The segments \( PA \) and \( PB \) are the required tangents. — Reason: The meeting point \( P \) is the external point from which both tangents are drawn; the angle \( \angle APB \) formed here will automatically equal \( 70^\circ \) because of the supplementary relationship established in Step 2.
  7. Step 7: Verify the construction by measuring \( \angle APB \) with a protractor. It should read \( 70^\circ \). Also confirm that \( PA = PB \), which holds because tangents from an external point to a circle are always equal in length. — Reason: This check confirms that the construction is accurate and consistent with the properties of tangents from an external point.

Final Answer

The required tangent segments \( PA \) and \( PB \) are drawn from external point \( P \) such that \( \angle APB = 70^\circ \), by first constructing \( \angle AOB = 110^\circ \) at the centre and then drawing perpendiculars to the radii at \( A \) and \( B \).

Common Mistake

One common mistake: Students often construct the central angle as \( 70^\circ \) instead of calculating its supplement \( 110^\circ \), forgetting that \( \angle APB + \angle AOB = 180^\circ \), which leads to an incorrect angle between the tangents at point \( P \).

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given: \( \angle APB = 70^\circ \), so \[ \angle AOB = 180^\circ - 70^\circ = 110^\circ \]
  2. Step 2: Draw a circle with centre \( O \) and radius \( 3 \) cm. Draw radius \( OA \), then use a protractor at \( O \) to mark \( \angle AOB = 110^\circ \) and draw radius \( OB \).
  3. Step 3: At \( A \), draw a line perpendicular to \( OA \); at \( B \), draw a line perpendicular to \( OB \). Label their intersection \( P \).

Answer: The required tangent segments \( PA \) and \( PB \) are drawn from external point \( P \) such that \( \angle APB = 70^\circ \), by first constructing \( \angle AOB = 110^\circ \) at the centre and then drawing perpendiculars to the radii at \( A \) and \( B \).

➕ More Examples

More Examples

Example 1

Question: Draw a circle with centre O and radius 4 cm. From an external point P, draw two tangent segments PA and PB to the circle such that \(\angle APB = 50^\circ\). Find the angle \(\angle AOB\).

Solution: Step 1: Recall the key property. The radius to a point of tangency is perpendicular to the tangent, so \(\angle OAP = \angle OBP = 90^\circ\). \nStep 2: Consider quadrilateral OAPB. The sum of interior angles of any quadrilateral is \(360^\circ\). \nStep 3: Write the angle sum equation: \[\angle OAP + \angle APB + \angle OBP + \angle AOB = 360^\circ\] \nSubstituting the known values: \[90^\circ + 50^\circ + 90^\circ + \angle AOB = 360^\circ\] \nSimplifying: \[230^\circ + \angle AOB = 360^\circ\] \nTherefore: \[\angle AOB = 360^\circ - 230^\circ = 130^\circ\]

Answer: \(\angle AOB = 130^\circ\)

Example 2

Question: A circle with centre O has a radius of 5 cm. Tangents PQ and PR are drawn from an external point P to the circle, where Q and R are the points of tangency. If \(\angle QPR = 80^\circ\), find the angle \(\angle QOR\). Also verify that OP bisects both \(\angle QPR\) and \(\angle QOR\).

Solution: Step 1: Since PQ and PR are tangents and OQ, OR are radii to the points of tangency, we have \(\angle OQP = \angle ORP = 90^\circ\). \nStep 2: In quadrilateral OQPR, the angle sum is \(360^\circ\): \[\angle OQP + \angle QPR + \angle ORP + \angle QOR = 360^\circ\] \nSubstituting: \[90^\circ + 80^\circ + 90^\circ + \angle QOR = 360^\circ\] \nSolving: \[\angle QOR = 360^\circ - 260^\circ = 100^\circ\] \nStep 3: Verification using triangles. In triangles OQP and ORP, OQ = OR (radii), PQ = PR (tangents from same external point), and OP is common. So \(\triangle OQP \cong \triangle ORP\) by SSS congruence. \nTherefore OP bisects \(\angle QPR\), giving each half as \(\frac{80^\circ}{2} = 40^\circ\). \nOP also bisects \(\angle QOR\), giving each half as \(\frac{100^\circ}{2} = 50^\circ\). \nNote that in right triangle OQP: \(\angle QOP = 50^\circ\) and \(\angle QPO = 40^\circ\), and \(50^\circ + 40^\circ + 90^\circ = 180^\circ\). This confirms our answer.

Answer: \(\angle QOR = 100^\circ\); OP bisects \(\angle QPR\) into two angles of \(40^\circ\) each, and bisects \(\angle QOR\) into two angles of \(50^\circ\) each.

🎯 Try a Similar Question

Try a Similar Question

Question: Draw a circle with centre \( O \) having radius \( 4 \) cm. From an external point \( P \), draw tangent segments \( PA \) and \( PB \) to the circle such that \( \angle APB = 50^\circ \). Measure and write the length of \( PA \).

Solution

  1. Step 1: Find the required angle at the centre: Since the angle between the two tangents and the angle at the centre are supplementary, we use the relation \( \angle AOB + \angle APB = 180^\circ \). Substituting \( \angle APB = 50^\circ \): \[ \angle AOB = 180^\circ - 50^\circ = 130^\circ \]
  2. Step 2: Draw the circle and the radii: Draw a circle with centre \( O \) and radius \( 4 \) cm. Draw a radius \( OA \). Then draw another radius \( OB \) such that \( \angle AOB = 130^\circ \).
  3. Step 3: Draw perpendiculars at A and B: At point \( A \), draw a line perpendicular to radius \( OA \) (since a tangent is perpendicular to the radius at the point of contact). Similarly, at point \( B \), draw a line perpendicular to radius \( OB \).
  4. Step 4: Locate the external point P: The two perpendicular lines drawn at \( A \) and \( B \) will intersect at a point. Label this intersection point \( P \). The segments \( PA \) and \( PB \) are the required tangent segments from the external point \( P \) to the circle.
  5. Step 5: Verify the angle and find PA: Verify that \( \angle APB = 50^\circ \) by measurement. To calculate \( PA \) theoretically, note that in right triangle \( OAP \), \( \angle OAP = 90^\circ \), \( OA = 4 \) cm, and \( \angle AOP = \frac{\angle AOB}{2} = 65^\circ \). So \[ PA = OA \ \times \tan(65^\circ) \approx 4 \times 2.145 \approx 8.58 \text{ cm} \]

Answer: The required tangent segments \( PA \) and \( PB \) are drawn from external point \( P \) such that \( \angle APB = 50^\circ \), by first constructing \( \angle AOB = 130^\circ \) at the centre and then drawing perpendiculars to the radii at \( A \) and \( B \). The length of \( PA \approx 8.58 \) cm.

Everything you get with Solver7

More questions in Circle

Chapter 9 Examples Q1 Practice Set 9.1 Q1 (i) Practice Set 9.2 Q1 Practice Set 9.3 Q1 Practice Set 9.4 Q1 (i) Practice Set 9.5 Q1 Problem Set 9 Q1 (i) 03/2018 2018 / Question 4 Q1 03/2019 2019 / Question 5 Q1 N397 2024 / Question 2 QA (i) N397 2024 / Question 5 Q1 N397 2026 / Question 2 QA (i) N397 2026 / Question 5 Q1 (a) N632 2024 / Question 2 QA (i) N723 2022 / Question 3 QA (i) N832 2025 / Question 2 QA (i) N832 2025 / Question 5 Q1 N926 2023 / Question 2 QA (i) N926 2023 / Question 5 Q1 N932 2026 / Question 2 QA (i) N932 2026 / Question 5 Q1 (a) Chapter 9 Examples Q2 Practice Set 9.1 Q1 (ii) Practice Set 9.2 Q2 Practice Set 9.3 Q2 (i) Practice Set 9.4 Q1 (ii) Practice Set 9.5 Q2 (i) Problem Set 9 Q1 (ii) 03/2018 2018 / Question 1 Q2 03/2018 2018 / Question 2 Q2 03/2019 2019 / Question 3 QA (ii) 03/2019 2019 / Question 4 Q2 (a) N397 2024 / Question 1 QA (ii) N397 2026 / Question 1 QA (ii) N397 2026 / Question 5 Q1 (b) N632 2024 / Question 3 QA (ii) N697 2025 / Question 1 QA (ii) N697 2025 / Question 2 QA (ii) N697 2025 / Question 3 QA (ii) N723 2022 / Question 1 QA (ii) N723 2022 / Question 4 Q2 N832 2025 / Question 1 QA (ii) N832 2025 / Question 2 QA (ii) N926 2023 / Question 1 QA (ii) N932 2026 / Question 1 QA (ii) N932 2026 / Question 5 Q1 (b) Practice Set 9.1 Q1 (iii) Practice Set 9.2 Q3 (i) Chapter 9 Examples Q3 (i) Practice Set 9.3 Q2 (ii) Practice Set 9.4 Q1 (iii) Practice Set 9.5 Q2 (ii) Problem Set 9 Q1 (iii) 03/2019 2019 / Question 1 QA (iii) 03/2019 2019 / Question 4 Q2 (b) N397 2024 / Question 3 QB (i) N397 2026 / Question 2 QA (iii) N397 2026 / Question 5 Q1 (c) N697 2025 / Question 2 QA (iii) N697 2025 / Question 4 Q3