SOLVER7 Study. Nothing Else.
Problem Set 9 Q6 (i)

In figure \(3.86,\) circle with centre \(M\) touches the circle with centre \(N\) at point \(T.\) Radius \(RM\) touches the smaller circle at \(S.\) Radii of circles are \(9\ cm\) and \(2.5\ cm.\) Find the answers to the following questions hence find the ratio \(MS:SR.\)
Find the length of segment \(MT\)

MAH STATE BOARD Mah SB Class 10 Maths · Circle

Solution

👶 Simple Explanation

Simple Explanation

Imagine a big circular pond. The distance from the centre of the pond to its edge is always the same all the way around. That fixed distance is called the radius. Point T sits right on the edge of the big circle whose centre is M. So MT is just the radius of the big circle. The big circle has a radius of 9 cm. No tricky calculation needed at all!

Answer: \( MT = 9 \text{ cm} \)

📖 Length of Segment MT

Detailed Explanation

When a circle touches another circle, the point of contact lies on the line joining the two centres. Here, the bigger circle has centre M and radius 9 cm. Point T is a point on the bigger circle where the smaller circle (centre N) touches it internally. Since T lies on the bigger circle, the segment MT is simply a radius of the bigger circle. So we do not need any extra calculation — MT equals the radius of the circle with centre M.

Formula Used

For any point P lying on a circle with centre O and radius r, the distance OP = r.

Solution

  1. Step 1: Identify the circle containing T: From the figure, T is the point where the smaller circle (centre N) touches the bigger circle (centre M). Hence T lies on the bigger circle.
  2. Step 2: Use the definition of radius: Since T is a point on the bigger circle whose centre is M, the segment MT joins the centre M to a point on the circle. Therefore MT is a radius of the bigger circle.
  3. Step 3: Write the value: The radius of the bigger circle is given as 9 cm. \[ MT = 9 \text{ cm} \]

Final Answer

\( MT = 9 \text{ cm} \)

Common Mistake

A common mistake is to subtract or add the two radii (like 9 - 2.5) to find MT. Remember, T lies on the bigger circle, so MT is directly the radius of the bigger circle, which is 9 cm.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Read the given information carefully: the bigger circle has centre M and radius 9 cm; the smaller circle has centre N and touches the bigger circle internally at point T. — Reason: Identifying what is given helps us decide which property to apply.
  2. Step 2: Locate point T on the figure: T is the point where the smaller circle touches the bigger circle from inside. Because T is the point of internal contact, it lies exactly on the circumference (boundary) of the bigger circle. — Reason: The point of tangency between two circles always lies on the boundary of both circles.
  3. Step 3: Apply the radius definition to the bigger circle: since T is a point on the bigger circle and M is its centre, the segment MT is a radius of the bigger circle. — Reason: By definition, the distance from the centre of a circle to any point on its circumference equals the radius.
  4. Step 4: Substitute the known radius value: the radius of the bigger circle is given as 9 cm, so \[MT = 9 \text{ cm}\] — Reason: No further calculation is needed because MT is simply that radius.

Final Answer

\( MT = 9 \text{ cm} \)

Common Mistake

One common mistake: students sometimes try to subtract the radius of the smaller circle from the radius of the bigger circle to find MT, forgetting that T lies on the bigger circle itself and MT is directly equal to the radius of the bigger circle.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given: Bigger circle has centre M and radius = 9 cm. Point T lies on the bigger circle.
  2. Step 2: MT = radius of bigger circle = 9 cm

Answer: \( MT = 9 \text{ cm} \)

➕ More Examples

More Examples

Example 1

Question: A large circle with centre M and radius 10 cm touches a smaller circle with centre N and radius 3 cm internally at point T. A radius MP of the larger circle is tangent to the smaller circle at point Q. Find: (i) the length MT, (ii) the length MN, (iii) the length NQ, (iv) the length MQ, and hence find the ratio MQ : QP.

Solution: Given: Radius of larger circle R = 10 cm, radius of smaller circle r = 3 cm. The two circles touch internally at T. (i) MT is the radius of the larger circle, so MT = 10 cm. (ii) Since the circles touch internally at T, M, N, and T are collinear with N between M and T. Therefore MN = R - r = 10 - 3 = 7 cm. (iii) NQ is the radius of the smaller circle drawn to the point of tangency Q on line MP. Therefore NQ = 3 cm. (iv) Since MP is tangent to the smaller circle at Q, the radius NQ is perpendicular to MP. So triangle MNQ has a right angle at Q. Using the Pythagorean theorem in triangle MNQ: \[ MQ^2 = MN^2 - NQ^2 \] Substituting values: \[ MQ^2 = 7^2 - 3^2 = 49 - 9 = 40 \] Therefore \[ MQ = \sqrt{40} = 2\sqrt{10} \text{ cm} \] (v) MP is the radius of the larger circle, so MP = 10 cm. Hence QP = MP - MQ = 10 - 2\sqrt{10} cm. \nThe ratio MQ : QP is \[ MQ : QP = 2\sqrt{10} : (10 - 2\sqrt{10}) \] Dividing both parts by 2: \[ = \sqrt{10} : (5 - \sqrt{10}) \]

Answer: MT = 10 cm, MN = 7 cm, NQ = 3 cm, MQ = \( 2\sqrt{10} \) cm, and the ratio MQ : QP = \( \sqrt{10} : (5 - \sqrt{10}) \)

Example 2

Question: A circle with centre P and radius 13 cm touches a smaller circle with centre Q and radius 5 cm internally at point A. Radius PB of the larger circle is tangent to the smaller circle at point C. Find: (i) length PA, (ii) length PQ, (iii) length PC, and hence find the ratio PC : CB.

Solution: Given: Radius of larger circle R = 13 cm, radius of smaller circle r = 5 cm. The two circles touch internally at A. (i) PA is the radius of the larger circle. Therefore PA = 13 cm. (ii) Since the circles touch internally, P, Q, and A are collinear with Q lying between P and A. Therefore PQ = R - r = 13 - 5 = 8 cm. (iii) QC is the radius of the smaller circle drawn to the point where PB is tangent to the smaller circle. Since PB is tangent to the smaller circle at C, the radius QC is perpendicular to PB. In right triangle PCQ with the right angle at C: \[ PC^2 = PQ^2 - QC^2 \] Substituting values: \[ PC^2 = 8^2 - 5^2 = 64 - 25 = 39 \] Therefore \[ PC = \sqrt{39} \text{ cm} \] (iv) PB is the radius of the larger circle, so PB = 13 cm. Hence CB = PB - PC = 13 - \sqrt{39} cm. \nThe ratio PC : CB is \[ PC : CB = \sqrt{39} : (13 - \sqrt{39}) \]

Answer: PA = 13 cm, PQ = 8 cm, PC = \( \sqrt{39} \) cm, and the ratio PC : CB = \( \sqrt{39} : (13 - \sqrt{39}) \)

🎯 Try a Similar Question

Try a Similar Question

Question: A circle with centre M touches a smaller circle with centre N internally at point T. A radius RM of the larger circle touches the smaller circle at point S. The radius of the larger circle is 12 cm and the radius of the smaller circle is 3 cm. Find the length of segment MT.

Solution

  1. Step 1: Understand the configuration: The larger circle has centre M and radius 12 cm. The smaller circle has centre N and radius 3 cm. The two circles touch internally at point T, meaning T lies on both circles and on the line MN.
  2. Step 2: Identify what MT represents: Since T is a point on the larger circle (the circle with centre M), the segment MT is a radius of the larger circle.
  3. Step 3: State the conclusion: The radius of the larger circle is given as 12 cm. Therefore, \[MT = 12 \text{ cm}\]

Answer: MT = 12 cm

Everything you get with Solver7

More questions in Circle

Chapter 9 Examples Q1 Practice Set 9.1 Q1 (i) Practice Set 9.2 Q1 Practice Set 9.3 Q1 Practice Set 9.4 Q1 (i) Practice Set 9.5 Q1 Problem Set 9 Q1 (i) 03/2018 2018 / Question 4 Q1 03/2019 2019 / Question 5 Q1 N397 2024 / Question 2 QA (i) N397 2024 / Question 5 Q1 N397 2026 / Question 2 QA (i) N397 2026 / Question 5 Q1 (a) N632 2024 / Question 2 QA (i) N723 2022 / Question 3 QA (i) N832 2025 / Question 2 QA (i) N832 2025 / Question 5 Q1 N926 2023 / Question 2 QA (i) N926 2023 / Question 5 Q1 N932 2026 / Question 2 QA (i) N932 2026 / Question 5 Q1 (a) Chapter 9 Examples Q2 Practice Set 9.1 Q1 (ii) Practice Set 9.2 Q2 Practice Set 9.3 Q2 (i) Practice Set 9.4 Q1 (ii) Practice Set 9.5 Q2 (i) Problem Set 9 Q1 (ii) 03/2018 2018 / Question 1 Q2 03/2018 2018 / Question 2 Q2 03/2019 2019 / Question 3 QA (ii) 03/2019 2019 / Question 4 Q2 (a) N397 2024 / Question 1 QA (ii) N397 2026 / Question 1 QA (ii) N397 2026 / Question 5 Q1 (b) N632 2024 / Question 3 QA (ii) N697 2025 / Question 1 QA (ii) N697 2025 / Question 2 QA (ii) N697 2025 / Question 3 QA (ii) N723 2022 / Question 1 QA (ii) N723 2022 / Question 4 Q2 N832 2025 / Question 1 QA (ii) N832 2025 / Question 2 QA (ii) N926 2023 / Question 1 QA (ii) N932 2026 / Question 1 QA (ii) N932 2026 / Question 5 Q1 (b) Practice Set 9.1 Q1 (iii) Practice Set 9.2 Q3 (i) Chapter 9 Examples Q3 (i) Practice Set 9.3 Q2 (ii) Practice Set 9.4 Q1 (iii) Practice Set 9.5 Q2 (ii) Problem Set 9 Q1 (iii) 03/2019 2019 / Question 1 QA (iii) 03/2019 2019 / Question 4 Q2 (b) N397 2024 / Question 3 QB (i) N397 2026 / Question 2 QA (iii) N397 2026 / Question 5 Q1 (c) N632 2024 / Question 4 Q3 N697 2025 / Question 2 QA (iii)