SOLVER7 Study. Nothing Else.
Problem Set 9 Q19

In figure \(3.97,\) circles with centres \(C\) and \(D\) touch internally at point \(E.\) \(D\) lies on the inner circle. Chord \(EB\) of the outer circle intersects inner circle at point \(A.\) Prove that, seg \(EA\cong\) seg \(AB.\)

MAH STATE BOARD Mah SB Class 10 Maths · Circle

Solution

👶 Simple Explanation

Simple Explanation

Imagine two rings, one smaller sitting inside a bigger one, touching at one point. The centre of the big ring is like the boss who stands exactly in the middle. When a line is drawn from that touching point through the small ring, it makes a perfect right angle with a chord of the big ring. A right angle here is like a perfectly upright door corner. Whenever the boss draws a line straight down to a chord, it cuts that chord into two equal halves. So both pieces of the chord are the same length.

Answer: Since ED is a diameter of the inner circle, \(\angle EAD = 90^\circ\), so DA \(\perp\) EB. As D is the centre of the outer circle and EB is its chord, the perpendicular DA from the centre bisects the chord. Therefore seg EA \(\cong\) seg AB. Hence proved.

📖 Two circles touching internally - Prove EA = AB

Detailed Explanation

When a chord of a circle passes through the centre-line, we often use the property that the perpendicular from the centre of a circle to a chord bisects the chord. Here, ED is a chord of the outer circle (since E is on the outer circle and D lies on the inner circle, but more importantly ED extended is a diameter direction). Actually, since both circles touch internally at E, the centres C and D and the point of contact E are collinear. So E, D, C all lie on one straight line, and ED is a diameter of the inner circle (because D is the centre of the inner circle... wait, D lies ON the inner circle, so ED is a chord of the inner circle passing through its centre C, making ED a diameter of the inner circle). Using the angle in a semicircle theorem and the perpendicular-from-centre-to-chord theorem, we can prove EA = AB.

Formula Used

Key facts used: (1) Angle inscribed in a semicircle is a right angle (\(90^\circ\)). (2) The perpendicular drawn from the centre of a circle to a chord bisects the chord.

Solution

  1. Step 1: Identify collinearity of centres and point of contact: Since the two circles touch each other internally at point E, by the theorem of touching circles, the centres C and D and the point of contact E are collinear. So points E, C, D lie on one straight line.
  2. Step 2: Show that ED is a diameter of the inner circle: The inner circle has centre C. Point E lies on the inner circle (it is the point where both circles touch) and point D also lies on the inner circle (given). Since E, C, D are collinear (from Step 1) and C is the centre lying between E and D on this line, segment ED passes through centre C. Therefore ED is a diameter of the inner circle.
  3. Step 3: Use the angle in a semicircle property: Point A lies on the inner circle. Since ED is a diameter of the inner circle, the angle inscribed in the semicircle at A is a right angle. \[\angle EAD = 90^\circ\]
  4. Step 4: Interpret \(\angle EAD\) with respect to chord EB of the outer circle: The points E, A, B are collinear because A lies on chord EB of the outer circle. So \(\angle EAD = 90^\circ\) means that segment DA is perpendicular to segment EB. That is, \(DA \perp EB\).
  5. Step 5: Apply the perpendicular-from-centre-to-chord theorem in the outer circle: EB is a chord of the outer circle, and D is the centre of the outer circle. We have shown that DA is perpendicular to chord EB. By the theorem, the perpendicular drawn from the centre of a circle to any chord bisects the chord. Therefore A is the midpoint of chord EB.
  6. Step 6: Conclude the congruence: Since A is the midpoint of EB, we get \[EA = AB\] Hence, seg EA \(\cong\) seg AB.

Final Answer

Since ED is a diameter of the inner circle, \(\angle EAD = 90^\circ\), so DA \(\perp\) EB. As D is the centre of the outer circle and EB is its chord, the perpendicular DA from the centre bisects the chord. Therefore seg EA \(\cong\) seg AB. Hence proved.

Common Mistake

A common mistake is forgetting that when two circles touch internally, the point of contact and both centres are collinear. Without this fact, students cannot see that ED becomes a diameter of the inner circle, and the proof breaks down.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Recall that D is the centre of the outer circle and C is the centre of the inner circle, with both circles touching internally at point E. By the theorem on internally touching circles, the two centres and the point of contact must be collinear. Therefore points E, C, and D all lie on a single straight line. — Reason: This collinearity is a standard result whenever two circles touch each other (internally or externally), and it is the foundation for everything that follows.
  2. Step 2: Now identify which circle the segment ED relates to. Point E is the point of tangency, so it lies on the inner circle. Point D also lies on the inner circle (it is given as a point on the inner circle). The segment ED connects two points on the inner circle and, from Step 1, it passes through C, the centre of the inner circle. A chord of a circle that passes through the centre is a diameter. Hence ED is a diameter of the inner circle. — Reason: Recognising ED as a diameter lets us apply the angle-in-a-semicircle theorem in the next step.
  3. Step 3: Point A lies on the inner circle, and ED is a diameter of the inner circle. By the angle-in-a-semicircle theorem, an angle inscribed in a semicircle is always \(90^\circ\). Therefore \(\angle EAD = 90^\circ\). — Reason: This right angle is the crucial link between the inner-circle geometry and the chord EB of the outer circle.
  4. Step 4: Because \(\angle EAD = 90^\circ\), segment DA is perpendicular to segment EB at point A. In other words, DA \(\perp\) EB. — Reason: We restate the right-angle result as a perpendicularity condition so we can apply the chord-bisection property of the outer circle.
  5. Step 5: Now focus on the outer circle. D is the centre of the outer circle, and EB is a chord of the outer circle (since both E and B lie on the outer circle). We have just shown that DA, drawn from centre D, meets chord EB at right angles. By the theorem that states a perpendicular drawn from the centre of a circle to a chord bisects that chord, point A must be the midpoint of chord EB. Therefore \(\text{seg } EA \cong \text{seg } AB\). — Reason: Applying the perpendicular-from-centre theorem directly gives the required equal segments, completing the proof.

Final Answer

Since ED is a diameter of the inner circle, \(\angle EAD = 90^\circ\), so DA \(\perp\) EB. As D is the centre of the outer circle and EB is its chord, the perpendicular DA from the centre bisects the chord. Therefore seg EA \(\cong\) seg AB. Hence proved.

Common Mistake

One common mistake: students confuse which circle ED is a diameter of — ED is a diameter of the inner circle (because C, the inner circle's centre, lies on ED), not of the outer circle. Using it as a diameter of the outer circle leads to an incorrect angle calculation and a broken proof.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Since the two circles touch internally at E, the centres C, D and point E are collinear, so ED is a diameter of the inner circle.
  2. Step 2: A is a point on the inner circle with ED as diameter, so by the angle in a semicircle theorem: \( \angle EAD = 90^\circ \), i.e. DA \( \perp \) EB.
  3. Step 3: D is the centre of the outer circle and EB is a chord of the outer circle. DA \( \perp \) EB, so by the perpendicular-from-centre theorem, A is the midpoint of EB, giving seg EA \( \cong \) seg AB.

Answer: Since ED is a diameter of the inner circle, \(\angle EAD = 90^\circ\), so DA \(\perp\) EB. As D is the centre of the outer circle and EB is its chord, the perpendicular DA from the centre bisects the chord. Therefore seg EA \(\cong\) seg AB. Hence proved.

➕ More Examples

More Examples

Example 1

Question: Two circles with centres P and Q touch internally at point T. Centre Q lies on the inner (smaller) circle. A chord TF of the outer circle intersects the inner circle at point G. Prove that seg TG ≅ seg GF.

Solution: Given: Circles with centres P and Q touch internally at T. Q lies on the inner circle. Chord TF of the outer circle meets the inner circle at G. \nTo Prove: TG = GF. \nConstruction: Draw seg QG. \nStep 1 — Radius of the inner circle.\nSince Q is the centre of the inner circle and T is the point of internal tangency, PT is a radius of the outer circle and QT is a radius of the inner circle. \nBecause the circles touch internally at T, the centres P, Q, and the point T are collinear (the common internal tangent passes through T and the line of centres passes through T). \nThus PT is a diameter of the outer circle. \nStep 2 — QT equals QG.\nSince Q is the centre of the inner circle and both T and G lie on the inner circle, \[ QT = QG \] (both are radii of the inner circle). \nStep 3 — QT is a radius of the outer circle related to PT.\nSince Q lies on the inner circle and the inner circle has centre Q, the radius of the inner circle is QT. Also, QT = PQ + QT is not directly needed; rather, note that QT is a radius of the inner circle. \nStep 4 — QG is perpendicular to TF.\nIn the outer circle, PT is a diameter (shown in Step 1). P is the centre of the outer circle and TF is a chord of the outer circle with one end at T. \nNow consider chord TF in the outer circle. Draw PG (from centre P to point G on chord TF). We need to show PG ⊥ TF. \nSince Q lies on the inner circle, QT = QG (radii of inner circle). So triangle QTG is isosceles. \nIn the outer circle, P is the centre. We know PQ passes through T (collinearity from Step 1), so PT is a diameter of the outer circle and P is the midpoint of... let us use the key approach: \nThe inner circle has centre Q and radius QT = QG. Q is the midpoint of the diameter of the inner circle that lies along the line PT. Now, QG is a radius of the inner circle and G lies on chord TF of the outer circle. \nDraw PG from centre P of the outer circle to G. \[ PG \perp TF \]\nmust be established. We use: P is the centre of the outer circle. QT = QG (radii of inner circle, both equal, say r). PT = R (radius of outer circle). PQ = R - r (since they touch internally). In triangle PTF, G is on TF and QG is a radius of the inner circle. \nKey step: Since the inner circle has centre Q and QG = QT = r, and P, Q, T are collinear with PQ = R - r, consider that PG joins the centre P of the outer circle to point G on chord TF. We show PG ⊥ TF by showing QG ⊥ TF first. \nIn the outer circle, chord TF subtends ∠TPF at the centre. Since PT is a diameter of the outer circle, ∠TFF... Let us use the clean perpendicularity argument: \nBecause Q is the centre of the inner circle and QT and QG are both radii of the inner circle, triangle QTG is isosceles with QT = QG. The perpendicular from Q to chord TG of the inner circle bisects TG. But TG is part of TF, so the perpendicular from Q to line TF bisects TG only if Q lies on the perpendicular bisector of TG, which it does since QT = QG. \nThus QM ⊥ TF where M is the midpoint of TG — this does not immediately give us what we want. \nCorrect approach: Draw PG from the centre P of the outer circle perpendicular to chord TF. Let PG meet TF at point H. By the theorem, H is the midpoint of TF. We need to show H = G. \nSince P, Q, T are collinear (line of centres through point of tangency), and QG is a radius of the inner circle perpendicular to chord TF of the outer circle... \nActually, use the most direct method: \nIn the outer circle with centre P, PT is a diameter, so ∠TFF... ∠TGF is not at the circumference here. Instead: \nPT is a diameter of the outer circle. So for any point on the outer circle, the angle subtended by PT is 90°. Hence ∠PFT... no, F is on the outer circle, so ∠TFP = 90° — wait, the angle in a semicircle is 90°, so ∠TFP = 90° only if PT is a diameter and F is on the circle. \nIndeed, PT is a diameter of the outer circle and F lies on the outer circle. By Thales' theorem: \[ \angle TFP = 90^\circ \]\nSo PF ⊥ TF. \nNow, PF ⊥ TF means PF is perpendicular to line TF at point F. But G is between T and F on segment TF, and PG is drawn from P to G. For PG ⊥ TF we need G = foot of perpendicular from P to TF. \nSince PF ⊥ TF, the foot of the perpendicular from P to line TF is exactly F. So the perpendicular from centre P to chord TF meets TF at F — but F is an endpoint on the circle, not an interior point, which would only happen if the chord degenerates. \nLet us restart with the correct diagram interpretation: PT is a diameter of the INNER circle (not the outer one), because Q lies on the inner circle and QT is a radius of the inner circle, so the diameter of the inner circle through T passes through Q and ends at the point diametrically opposite to T on the inner circle. P is the centre of the OUTER circle. \nRevised Step 1 — PT is a diameter of the outer circle? No. P is the centre of the outer circle, so the diameter of the outer circle would be 2 × PT. \nLet us set up clearly: Let the outer circle have centre P and radius R. Let the inner circle have centre Q and radius r. They touch internally at T, so P, Q, T are collinear and PT = R, QT = r, PQ = R - r. \nQ lies on the inner circle means QQ = 0 ≠ r unless r = 0. So Q is the CENTRE of the inner circle, and the problem says Q lies on the inner circle — this means Q is on the inner circle, so QQ = 0 = r is impossible. \nRe-reading: 'Centre Q lies on the inner circle' — this must mean the centre Q of the OUTER circle lies on the inner circle. So P is centre of inner circle, Q is centre of outer circle, and Q lies on the inner circle. \nLet inner circle: centre P, radius r. Outer circle: centre Q, radius R. They touch internally at T, so P, Q, T collinear, QT = R, PT = r, QP = R - r. Q lies on the inner circle means PQ = r, so R - r = r, giving R = 2r. So the radius of the outer circle is twice that of the inner circle, meaning PT = r = QP, so P is the midpoint of QT, i.e., QT = 2 · QP = 2r = R. This is consistent: QT = R. ✓ \nNow: PT is a diameter of the inner circle (since P is the centre of the inner circle and T is on it, and Q is also on the inner circle with PQ = r, so QT = 2r = diameter of inner circle, confirming QT is a diameter of the inner circle). \nChord TF of the outer circle meets the inner circle at G. \nProof: \nSince QT is a diameter of the inner circle (Q is on the inner circle, T is on the inner circle, and QT = 2r = diameter), by Thales' theorem, any angle inscribed in the inner circle subtending QT is 90°. G lies on the inner circle, so: \[ \angle QGT = 90^\circ \]\nThus QG ⊥ GT, meaning QG ⊥ TF (since G lies on TF). \nNow, QG ⊥ TF and Q is the centre of the OUTER circle, and TF is a chord of the outer circle. By the theorem that the perpendicular from the centre of a circle to a chord bisects the chord: \[ TG = GF \]\nHence seg TG ≅ seg GF.

Answer: TG = GF, so seg TG ≅ seg GF. (Proved using the angle in a semicircle and the perpendicular from centre bisects the chord.)

Example 2

Question: In the given figure, two circles with centres M and N touch internally at point K. The centre N of the outer circle lies on the inner circle. A chord KL of the outer circle cuts the inner circle at point J. Prove that KJ = JL.

Solution: Given: Inner circle has centre M and radius r. Outer circle has centre N and radius R. They touch internally at K, so M, N, K are collinear, MK = r, NK = R, MN = R - r. N lies on the inner circle, so MN = r. Therefore R - r = r, giving R = 2r. \nThis tells us NK = R = 2r = 2 × MN, and MK = r = MN, so M is the midpoint of segment NK, and NK = 2r is a diameter of the inner circle (since M is the centre of the inner circle and N, K are both on the inner circle with MN = MK = r). \nChord KL of the outer circle meets the inner circle at J. \nTo Prove: KJ = JL. \nStep 1 — NK is a diameter of the inner circle.\nN and K both lie on the inner circle (MN = r = radius, MK = r = radius) and M is the centre. So NK is a diameter of the inner circle. \nStep 2 — Angle NJK = 90°.\nJ lies on the inner circle and NK is a diameter of the inner circle. By Thales' theorem (angle in a semicircle): \[ \angle NJK = 90^\circ \]\nTherefore NJ ⊥ JK, i.e., NJ ⊥ KL (since J is on KL). \nStep 3 — Apply the perpendicular-from-centre theorem.\nN is the centre of the outer circle and KL is a chord of the outer circle. NJ is perpendicular to KL (from Step 2) and N is the centre of the outer circle. \nBy the theorem: The perpendicular drawn from the centre of a circle to a chord bisects the chord. \[ NJ \perp KL \Rightarrow KJ = JL \] \nStep 4 — Conclusion.\nSince J is the foot of the perpendicular from centre N to chord KL of the outer circle, J is the midpoint of KL. Therefore: \[ KJ = JL \]\nHence seg KJ ≅ seg JL.

Answer: KJ = JL, so seg KJ ≅ seg JL. (Proved using Thales' theorem and the property that a perpendicular from the centre bisects the chord.)

🎯 Try a Similar Question

Try a Similar Question

Question: Two circles with centres P and Q touch internally at point T. The centre Q of the smaller (inner) circle lies on the larger (outer) circle. A chord TF of the outer circle intersects the inner circle at point G. Prove that seg TG is congruent to seg GF.

Solution

  1. Step 1: Identify the diameter of the inner circle: Since the two circles touch internally at T and P is the centre of the outer circle while Q is the centre of the inner circle, the line PQ extended passes through T. Because Q is the centre of the inner circle and T is on the inner circle, the segment TQ is a radius of the inner circle. Also, since Q lies on the outer circle, PQ is a radius of the outer circle, and T, Q, P are collinear (as T is the internal point of tangency). Therefore TQ passes through Q and T is on the inner circle, making TQ a radius. Since T and any diametrically opposite point on the inner circle form a diameter, we note that segment TQ is a radius of the inner circle and QG (where G is on the inner circle) is also a radius, so TQ = QG. Hence TG is a diameter of the inner circle.
  2. Step 2: Establish the right angle at G: Since TG is a diameter of the inner circle and G lies on the inner circle, the angle in a semicircle gives us that any angle subtended by a diameter on the circle is \( 90^{\circ} \). Point G lies on the inner circle, so \( \angle TGQ = 90^{\circ} \). This means QG is perpendicular to TF, i.e., \( QG \perp TF \).
  3. Step 3: Use the property of perpendicular from centre to chord: Consider the outer circle with centre P. The chord TF belongs to the outer circle. We need a perpendicular from P to chord TF. Since T, Q, P are collinear (they lie on the line through the centres and the point of tangency), and we showed \( QG \perp TF \), the line PQ is also perpendicular to TF at G (because P, Q, G are collinear along the perpendicular). Therefore PG is perpendicular to chord TF of the outer circle.
  4. Step 4: Conclude that G is the midpoint of TF: By the theorem that a perpendicular from the centre of a circle to a chord bisects the chord, since PG \( \perp \) TF and P is the centre of the outer circle, G is the midpoint of chord TF. Therefore \( TG = GF \), which means seg TG \( \cong \) seg GF. Hence proved.

Answer: Since TG is a diameter of the inner circle, \( \angle TGQ = 90^{\circ} \), so \( QG \perp TF \). Because P, Q, G are collinear, PG is also perpendicular to chord TF of the outer circle. By the theorem that a perpendicular from the centre bisects the chord, G is the midpoint of TF. Therefore seg TG \( \cong \) seg GF. Hence proved.

Everything you get with Solver7

More questions in Circle

Chapter 9 Examples Q1 Practice Set 9.1 Q1 (i) Practice Set 9.2 Q1 Practice Set 9.3 Q1 Practice Set 9.4 Q1 (i) Practice Set 9.5 Q1 Problem Set 9 Q1 (i) 03/2018 2018 / Question 4 Q1 03/2019 2019 / Question 5 Q1 N397 2024 / Question 2 QA (i) N397 2024 / Question 5 Q1 N397 2026 / Question 2 QA (i) N397 2026 / Question 5 Q1 (a) N632 2024 / Question 2 QA (i) N723 2022 / Question 3 QA (i) N832 2025 / Question 2 QA (i) N832 2025 / Question 5 Q1 N926 2023 / Question 2 QA (i) N926 2023 / Question 5 Q1 N932 2026 / Question 2 QA (i) N932 2026 / Question 5 Q1 (a) Chapter 9 Examples Q2 Practice Set 9.1 Q1 (ii) Practice Set 9.2 Q2 Practice Set 9.3 Q2 (i) Practice Set 9.4 Q1 (ii) Practice Set 9.5 Q2 (i) Problem Set 9 Q1 (ii) 03/2018 2018 / Question 1 Q2 03/2018 2018 / Question 2 Q2 03/2019 2019 / Question 3 QA (ii) 03/2019 2019 / Question 4 Q2 (a) N397 2024 / Question 1 QA (ii) N397 2026 / Question 1 QA (ii) N397 2026 / Question 5 Q1 (b) N632 2024 / Question 3 QA (ii) N697 2025 / Question 1 QA (ii) N697 2025 / Question 2 QA (ii) N697 2025 / Question 3 QA (ii) N723 2022 / Question 1 QA (ii) N723 2022 / Question 4 Q2 N832 2025 / Question 1 QA (ii) N832 2025 / Question 2 QA (ii) N926 2023 / Question 1 QA (ii) N932 2026 / Question 1 QA (ii) N932 2026 / Question 5 Q1 (b) Practice Set 9.1 Q1 (iii) Practice Set 9.2 Q3 (i) Chapter 9 Examples Q3 (i) Practice Set 9.3 Q2 (ii) Practice Set 9.4 Q1 (iii) Practice Set 9.5 Q2 (ii) Problem Set 9 Q1 (iii) 03/2019 2019 / Question 1 QA (iii) 03/2019 2019 / Question 4 Q2 (b) N397 2024 / Question 3 QB (i) N397 2026 / Question 2 QA (iii) N397 2026 / Question 5 Q1 (c) N632 2024 / Question 4 Q3 N697 2025 / Question 2 QA (iii)