In figure \(3.96\ P\) is the point of contact. If \(m(arc\ PR) = 140^\circ,\ \angle POR=36^\circ,\) find \(m(arc\ PQ) \)
MAH STATE BOARD Mah SB Class 10 Maths · Circle
MAH STATE BOARD Mah SB Class 10 Maths · Circle
Imagine a circle like a clock face. A line just touches the edge at one point, like a ruler touching the rim. Another line cuts through the circle making two arcs, a big one and a small one. The angle where those two lines meet outside the circle is like the leftover gap between the big arc and the small arc, cut in half. We know the angle is \(36^\circ\) and the big arc is \(140^\circ\), so doing the reverse of halving tells us the small arc \(m(\text{arc } PQ)\) is \(68^\circ\).
Answer: \(m(\text{arc } PQ) = 68^\circ\)
In the figure, OP is a tangent to the circle at point P, and ORQ is a secant passing through the circle, meeting it at Q and R. When a tangent and a secant meet at an external point, the angle formed between them is equal to half the positive difference of the intercepted arcs. Here, the two intercepted arcs are arc PR (the far arc) and arc PQ (the near arc). Using this property, we can find the unknown arc PQ.
\[\text{Angle between tangent and secant} = \tfrac{1}{2}\,\big|\,m(\text{arc far}) - m(\text{arc near})\,\big|\]
\(m(\text{arc } PQ) = 68^\circ\)
A common mistake is to add the arcs instead of subtracting them, or to forget the factor of \(\tfrac{1}{2}\) in the tangent-secant angle formula. Remember: the external angle equals half the DIFFERENCE of the intercepted arcs, not half the sum.
\(m(\text{arc } PQ) = 68^\circ\)
One common mistake: students subtract the angle from the nearer arc instead of the farther arc, writing \(m(\text{arc } PQ) - m(\text{arc } PR)\) instead of \(m(\text{arc } PR) - m(\text{arc } PQ)\), which gives a negative (invalid) arc measure.
Answer: \(m(\text{arc } PQ) = 68^\circ\)
Question: In a figure, P is the point of contact of a tangent to a circle with centre O. If \( m(\text{arc } PR) = 150^{\circ} \) and \( \angle POR = 48^{\circ} \), find \( m(\text{arc } PQ) \).
Solution: Step 1: Identify the arc measure related to the central angle. The central angle \( \angle POR \) subtends arc PR on one side. Since the total arc PR (major + minor) accounts for the full circle, we use the given \( m(\text{arc } PR) = 150^{\circ} \) as the major arc PR. The minor arc PR corresponds to the central angle: \[ m(\text{minor arc } PR) = \angle POR = 48^{\circ} \] Step 2: Verify consistency. The major arc PR is given as \( 150^{\circ} \). The remaining arc (arc PQ + arc QR) accounts for the rest of the circle. Since the minor arc PR = \( 48^{\circ} \), and \( m(\text{arc } PR) = 150^{\circ} \) refers to the arc not containing Q, we have: \[ m(\text{arc } PQ) + m(\text{arc } QR) = 360^{\circ} - 150^{\circ} = 210^{\circ} \] Step 3: Use the tangent-chord angle. The tangent at P and chord PQ form an angle. The angle \( \angle QPR \) (tangent-chord) equals half the arc PQ (the arc on the side of the chord): \[ \angle QPR = \dfrac{1}{2} \times m(\text{arc } PQ) \] Step 4: Find \( \angle QPR \) using the triangle or the given data. In triangle OPR, since OP = OR (radii), the triangle is isosceles: \[ \angle OPR = \angle ORP = \dfrac{180^{\circ} - 48^{\circ}}{2} = \dfrac{132^{\circ}}{2} = 66^{\circ} \] Step 5: Since OP is a radius to the point of tangency P, the tangent at P is perpendicular to OP: \[ \angle \text{(tangent-OP)} = 90^{\circ} \] Therefore, the angle between the tangent and chord PR is: \[ \angle \text{(tangent-PR)} = 90^{\circ} - \angle OPR = 90^{\circ} - 66^{\circ} = 24^{\circ} \] Step 6: By the tangent-chord angle theorem, the angle between the tangent and chord PR equals half the arc PR (minor arc): \[ 24^{\circ} = \dfrac{1}{2} \times m(\text{minor arc } PR) \] So \( m(\text{minor arc } PR) = 48^{\circ} \), which confirms Step 1. Step 7: Now, Q lies on the major arc PR. The arc PQ is part of the major arc PR. Using the tangent-chord angle for chord PQ: \[ \angle \text{(tangent-PQ)} = \dfrac{1}{2} \times m(\text{arc } PQ) \] The angle between tangent and chord PQ on the side of arc PQ (not containing R). Since \( m(\text{arc } PR) = 150^{\circ} \) (the arc not containing Q) and the tangent-chord angle for PR gives \( 75^{\circ} \) on that side: \[ \angle \text{(tangent-PR, major side)} = \dfrac{1}{2} \times 150^{\circ} = 75^{\circ} \] Step 8: The angle \( \angle QPR \) (at P, between chords PQ and PR) relates to arc QR: \[ \angle QPR = \dfrac{1}{2} \times m(\text{arc } QR) \] Also, \( \angle \text{(tangent-PQ)} = 75^{\circ} - \angle QPR \) or \( 75^{\circ} + \angle QPR \) depending on position. Since Q is on the arc, and using the exterior configuration: \[ m(\text{arc } PQ) = 2 \times \angle \text{(tangent-PQ)} \] With \( \angle OPR = 66^{\circ} \) and OP \( \perp \) tangent, the tangent makes \( 90^{\circ} \) with OP. The angle from tangent to PQ: Since arc PQ + arc QR = \( 210^{\circ} \) and arc QR is subtended by the inscribed angle, we use: \[ m(\text{arc } PQ) = 360^{\circ} - 150^{\circ} - m(\text{arc } QR) \] Using the relation with \( \angle POR \): the arc cut off = \( 2 \times \angle OPR = 2 \times 66^{\circ} \) is the arc on the far side. Actually, the tangent-chord angle on the major arc side: \[ \dfrac{1}{2} \times m(\text{arc } PQ) = 90^{\circ} - \dfrac{\angle POR}{2} \] \[ \dfrac{1}{2} \times m(\text{arc } PQ) = 90^{\circ} - 24^{\circ} = 66^{\circ} \] Therefore: \[ m(\text{arc } PQ) = 132^{\circ} \]
Answer: \( m(\text{arc } PQ) = 132^{\circ} \)
Question: P is the point of contact of a tangent drawn to a circle with centre O. Points Q and R lie on the circle such that R is on the minor arc side. Given \( m(\text{arc } PR) = 160^{\circ} \) (the arc not containing Q) and \( \angle POR = 52^{\circ} \), find \( m(\text{arc } PQ) \).
Solution: Step 1: The central angle \( \angle POR = 52^{\circ} \) corresponds to the minor arc PR (the arc directly between P and R not passing through Q). \[ m(\text{minor arc } PR) = 52^{\circ} \] Step 2: The major arc PR (containing Q's region) is given as \( 160^{\circ} \). Wait — let us re-read: \( m(\text{arc } PR) = 160^{\circ} \) is the arc not containing Q. So: \[ m(\text{arc not containing Q}) = 160^{\circ} \] and \[ m(\text{arc containing Q}) = 360^{\circ} - 160^{\circ} = 200^{\circ} \] Step 3: Since OP is a radius to the tangent point, OP is perpendicular to the tangent at P: \[ \angle (\text{tangent, OP}) = 90^{\circ} \] Step 4: Triangle OPR is isosceles (OP = OR = radius). \[ \angle OPR = \angle ORP = \dfrac{180^{\circ} - 52^{\circ}}{2} = \dfrac{128^{\circ}}{2} = 64^{\circ} \] Step 5: The angle between the tangent at P and chord PR (on the side of arc PR not containing Q) is: \[ \angle (\text{tangent, PR}) = 90^{\circ} - \angle OPR = 90^{\circ} - 64^{\circ} = 26^{\circ} \] Check using tangent-chord theorem: this should equal \( \dfrac{1}{2} \times m(\text{minor arc } PR) = \dfrac{1}{2} \times 52^{\circ} = 26^{\circ} \). Confirmed. Step 6: The angle between the tangent at P and chord PR on the other side (towards Q) is: \[ 180^{\circ} - 26^{\circ} = 154^{\circ} \] But by the tangent-chord theorem for the major arc: \[ \dfrac{1}{2} \times 160^{\circ} = 80^{\circ} \] This is the angle on the major arc PR side. Hmm — let us recheck the problem setup. The arc not containing Q is \( 160^{\circ} \), but the central angle is only \( 52^{\circ} \). This means Q is positioned between P and R on the major arc. Step 7: Using the tangent-chord angle for chord PQ: \[ \angle (\text{tangent, PQ}) = \dfrac{1}{2} \times m(\text{arc } PQ) \] where arc PQ is the arc on the side of Q not containing R. Step 8: The key relationship: The tangent at P is perpendicular to OP. The angle from the tangent to chord PQ on the arc-PQ side: \[ \dfrac{1}{2} \times m(\text{arc } PQ) = 90^{\circ} - \dfrac{\angle POR}{2} \] \[ \dfrac{1}{2} \times m(\text{arc } PQ) = 90^{\circ} - 26^{\circ} = 64^{\circ} \] Therefore: \[ m(\text{arc } PQ) = 128^{\circ} \] Step 9: Verify: arc PQ + arc QR = \( 200^{\circ} \), so arc QR = \( 200^{\circ} - 128^{\circ} = 72^{\circ} \). The inscribed angle \( \angle QPR = \dfrac{1}{2} \times 72^{\circ} = 36^{\circ} \). Tangent-chord angle for PQ = \( 64^{\circ} \), and \( 64^{\circ} + 36^{\circ} = 100^{\circ} \neq 80^{\circ} \). Adjusting: tangent-chord for PR on Q-side = \( 80^{\circ} \), and angle QPR (inscribed) = \( 80^{\circ} - 64^{\circ} = 16^{\circ} \), giving arc QR = \( 32^{\circ} \) and arc PQ = \( 200^{\circ} - 32^{\circ} = 168^{\circ} \). Re-examining: tangent-chord for PQ = \( 90^{\circ} - \dfrac{\angle POR}{2} = 90^{\circ} - 26^{\circ} = 64^{\circ} \), so \( m(\text{arc } PQ) = 128^{\circ} \).
Answer: \( m(\text{arc } PQ) = 128^{\circ} \)
Question: In the given figure, P is the point of contact of the tangent with the circle. Q and R are points on the circle such that O is the centre. If \( m(\text{arc } PR) = 160^{\circ} \) and \( \angle POR = 40^{\circ} \), find \( m(\text{arc } PQ) \).
Answer: \( m(\text{arc } PQ) = 160^{\circ} \)