In figure \(3.79,\ O\) is the centre of the circle and \(B\) is a point of contact. seg \(OE\perp\) seg \( AD,\ AB = 12,\ AC = 8,\) find \(DC.\)
MAH STATE BOARD Mah SB Class 10 Maths · Circle
MAH STATE BOARD Mah SB Class 10 Maths · Circle
Imagine a circle is like a round pond. You stand outside the pond at point A. You throw a straight stick that just touches the pond's edge — that stick is 12 units long. You also throw a longer stick that goes right into the pond and comes out the other side. The part outside the pond is 8 units. A special rule says the short stick's length squared equals the outside part times the whole long stick. Using this rule, the part inside the pond works out to be exactly 10 units.
Answer: DC = 10 units
From an external point A, two lines are drawn to the circle. AB is a tangent (since B is the point of contact) and ADC is a secant that intersects the circle at C (near A) and D (far from A). By the Tangent-Secant Segment Relationship, the square of the tangent segment equals the product of the whole secant and its external part. Also, since OE is perpendicular from the centre O to the chord DC, E is the midpoint of chord DC. This confirms the standard tangent-secant setup used here.
If AB is a tangent from external point A and ACD is a secant, then \( AB^2 = AC \times AD \).
DC = 10 units
A common mistake is writing \( AB^2 = AC \times DC \) instead of \( AB^2 = AC \times AD \). Remember: the tangent-squared equals the product of the whole secant (AD) and its external part (AC), not the internal chord DC.
DC = 10 units
One common mistake: students often write AD = DC instead of AD = AC + DC, forgetting that the full secant length must include both the external part AC and the chord DC — this leads to an incorrect equation and a wrong answer.
Answer: DC = 10 units
Question: In a figure, O is the centre of a circle and B is the point of contact of a tangent from an external point A. Segment OE is perpendicular to chord AD, where E is the foot of the perpendicular. Given that AB = 15, AC = 9 (where C is the second intersection of line AB with the circle), find DC.
Solution: Step 1 — Find OB (the tangent length). Since B is the point of contact, OB is tangent from external point A, so \[ OB = AB = 15. \] Step 2 — Use the Power of a Point (tangent-secant relation). From external point A, the tangent length is AB and the secant passes through C and D: \[ AB^2 = AC \times AD. \] Substituting AB = 15 and AC = 9: \[ 225 = 9 \times AD. \] Therefore \[ AD = 25. \] Step 3 — Use the perpendicular-bisector property. Since OE ⊥ AD, the perpendicular from the centre bisects the chord, so E is the midpoint of AD: \[ AE = ED = \frac{AD}{2} = \frac{25}{2} = 12.5. \] Step 4 — Find DC. \[ DC = AD - AC = 25 - 9 = 16. \]
Answer: DC = 16
Question: O is the centre of a circle. A tangent is drawn from an external point A touching the circle at point B. A secant from A passes through the circle, meeting it first at C and then at D (so C is between A and D). Segment OE is perpendicular to chord CD with E on CD. If AB = 10 and AC = 4, find the length DC.
Solution: Step 1 — Apply the tangent-secant (Power of a Point) theorem. From external point A, with tangent AB and secant ACD: \[ AB^2 = AC \times AD. \] Substituting AB = 10 and AC = 4: \[ 100 = 4 \times AD. \] Therefore \[ AD = 25. \] Step 2 — Find DC directly. \[ DC = AD - AC = 25 - 4 = 21. \] Step 3 — Verify using the perpendicular-bisector property (as a check). E is the midpoint of chord CD (since OE ⊥ CD), so \[ CE = ED = \frac{DC}{2} = \frac{21}{2} = 10.5. \] This confirms the chord is properly bisected by OE, consistent with the circle geometry.
Answer: DC = 21
Question: In the given figure, O is the centre of the circle and B is a point of contact. Seg OE is perpendicular to seg AD. If AB = 10 and AC = 5, find DC.
Answer: DC = 15 units