SOLVER7 Study. Nothing Else.
Practice Set 9.2 Q4 (i)

In fig \(3.27,\) the circles with centres \(P\) and \(Q\) touch each other at \(R.\) A line passing through \(R\) meets the circles at \(A\) and \(B\) respectively. Prove that seg \(AP\parallel\) seg \(BQ\).

MAH STATE BOARD Mah SB Class 10 Maths · Circle

Solution

👶 Simple Explanation

Simple Explanation

Imagine two circular coins touching each other at one point. The centres of the two coins and the touching point are always in a straight line. Now, a radius is like a arm reaching from the centre to any edge. When two arms of the same coin are equal, the triangle they make has two equal angles. The touching point makes two equal "opposite" angles too. All these equal angles together show that the two special lines on each coin point in exactly the same direction — meaning they are parallel.

Answer: Since \(\angle PAR = \angle QBR\) (a pair of alternate interior angles with transversal AB), we conclude that seg AP is parallel to seg BQ.

📖 Circles Touching Externally - Parallel Radii

Detailed Explanation

When two circles touch each other (either internally or externally), the point of contact lies on the line joining their centres. So the three points P (centre of first circle), R (point of contact) and Q (centre of second circle) are collinear. Also, in any circle, a radius drawn to a point on the circle forms an isosceles triangle with any chord starting from that point, because two radii of the same circle are equal in length. Using the isosceles triangle property along with vertically opposite angles at R, we can show two alternate interior angles are equal, which proves the two segments are parallel.

Formula Used

Key facts used: (1) Point of contact of two touching circles lies on the line joining their centres, so P, R, Q are collinear. (2) In an isosceles triangle, angles opposite to equal sides are equal. (3) Vertically opposite angles are equal. (4) If a transversal makes a pair of alternate angles equal, the two lines are parallel.

Solution

  1. Step 1: Identify equal radii in circle with centre P: In the circle with centre P, both PA and PR are radii of the same circle. Therefore \[PA = PR\] So triangle PAR is an isosceles triangle.
  2. Step 2: Use isosceles triangle property in triangle PAR: Since PA = PR, the angles opposite to these equal sides are equal. Hence \[\angle PAR = \angle PRA \quad \ldots (i)\]
  3. Step 3: Identify equal radii in circle with centre Q: In the circle with centre Q, both QB and QR are radii of the same circle. Therefore \[QB = QR\] So triangle QBR is an isosceles triangle.
  4. Step 4: Use isosceles triangle property in triangle QBR: Since QB = QR, the angles opposite to these equal sides are equal. Hence \[\angle QBR = \angle QRB \quad \ldots (ii)\]
  5. Step 5: Use the fact that P, R, Q are collinear: The two circles touch each other at R. So the point of contact R lies on the line joining the centres P and Q. Therefore P, R, Q are collinear, which means PRQ is a straight line.
  6. Step 6: Use vertically opposite angles at R: At point R, line AB and line PQ intersect. So the angles formed on opposite sides are vertically opposite. Therefore \[\angle PRA = \angle QRB \quad \ldots (iii)\]
  7. Step 7: Combine the three results: From (i), (ii) and (iii): \[\angle PAR = \angle PRA = \angle QRB = \angle QBR\] So \[\angle PAR = \angle QBR\]
  8. Step 8: Conclude parallelism: Consider AB as a transversal cutting segments AP and BQ. The angles \(\angle PAR\) and \(\angle QBR\) are a pair of alternate interior angles, and they are equal. Hence \[\text{seg } AP \parallel \text{seg } BQ\] Hence proved.

Final Answer

Since \(\angle PAR = \angle QBR\) (a pair of alternate interior angles with transversal AB), we conclude that seg AP is parallel to seg BQ.

Common Mistake

A very common mistake is forgetting to state that P, R, Q are collinear because the circles touch at R. Without this fact, the angles \(\angle PRA\) and \(\angle QRB\) cannot be claimed as vertically opposite angles, and the proof breaks down.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Recognise that P, R, Q are collinear — Reason: When two circles touch each other (internally or externally), the point of contact always lies on the straight line joining the two centres. Here P is the centre of one circle, Q is the centre of the other, and R is the point where they touch, so P, R, Q lie on one straight line.
  2. Step 2: Identify equal radii in the circle with centre P — Reason: PA and PR are both radii of the circle centred at P, so they must be equal in length. We write: \[PA = PR\] This means triangle PAR has two equal sides, making it isosceles.
  3. Step 3: Apply the isosceles triangle property to triangle PAR — Reason: In an isosceles triangle, the angles opposite the two equal sides are equal. Since \( PA = PR \), the angles opposite them are \( \angle PRA \) and \( \angle PAR \) respectively. Therefore: \[\angle PAR = \angle PRA \quad \cdots (i)\]
  4. Step 4: Identify equal radii in the circle with centre Q — Reason: QB and QR are both radii of the circle centred at Q, so they are equal. We write: \[QB = QR\] This means triangle QBR is also isosceles.
  5. Step 5: Apply the isosceles triangle property to triangle QBR — Reason: Since \( QB = QR \), the base angles of triangle QBR are equal. The angles opposite these equal sides are \( \angle QRB \) and \( \angle QBR \) respectively. Therefore: \[\angle QBR = \angle QRB \quad \cdots (ii)\]
  6. Step 6: Use vertically opposite angles at R — Reason: Since P, R, Q are collinear (Step 1), the line PQ passes straight through R. Angles \( \angle PRA \) and \( \angle QRB \) are formed on opposite sides of R on the same straight line, making them vertically opposite angles. Vertically opposite angles are always equal, so: \[\angle PRA = \angle QRB \quad \cdots (iii)\]
  7. Step 7: Chain the equalities to conclude \( \angle PAR = \angle QBR \) — Reason: From results (i), (ii), and (iii) we have \( \angle PAR = \angle PRA \), \( \angle PRA = \angle QRB \), and \( \angle QRB = \angle QBR \). Putting these together: \[\angle PAR = \angle QBR\] These are alternate interior angles formed by the transversal AB cutting seg AP and seg BQ. Equal alternate interior angles mean the two lines must be parallel.

Final Answer

Since \(\angle PAR = \angle QBR\) (a pair of alternate interior angles with transversal AB), we conclude that seg AP is parallel to seg BQ.

Common Mistake

One common mistake: Students forget that P, R, Q are collinear (they assume it without justification). Always state explicitly that the point of contact of two touching circles lies on the line joining their centres — this is the foundation that makes the vertically opposite angles step valid.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: In circle with centre P: radii \( PA = PR \), so \( \triangle PAR \) is isosceles, giving \( \angle PAR = \angle PRA \).
  2. Step 2: In circle with centre Q: radii \( QB = QR \), so \( \triangle QBR \) is isosceles, giving \( \angle QBR = \angle QRB \).
  3. Step 3: P, R, Q are collinear (point of contact lies on line joining centres), so \( \angle PRA = \angle QRB \) (vertically opposite angles). Hence \( \angle PAR = \angle QBR \).

Answer: Since \(\angle PAR = \angle QBR\) (a pair of alternate interior angles with transversal AB), we conclude that seg AP is parallel to seg BQ.

➕ More Examples

More Examples

Example 1

Question: Two circles with centres M and N touch each other externally at point T. A straight line through T intersects the first circle at point C and the second circle at point D. Prove that seg MC is parallel to seg ND.

Solution: Let the common tangent to both circles at the point of contact T be the line XY. \nStep 1: Tangent–radius relationship for circle with centre M.\nSince XY is the common tangent at T and MT is a radius of the circle with centre M, we have MT perpendicular to XY.\nHence \ \angle MTX = 90^\circ. \nStep 2: Angle in a semicircle for circle with centre M.\nSince CT is a chord of the circle with centre M passing through T, and M is the centre, the angle subtended by the chord at the centre is twice that at any point on the circle. However, we use the simpler property: MC = MT (radii), so triangle MCT is isosceles.\nLet \ \angle MTC = \alpha. Then \ \angle MCT = \alpha (base angles of isosceles triangle MCT).\nAlso, since MT is perpendicular to XY (the tangent at T), and CTD is the secant line through T: \[ \angle MTC = \angle MTX - \angle CTX = 90^\circ - \angle CTX \]\nWait — let us use the tangent–chord angle directly. \nThe angle between tangent XY and chord TC equals the inscribed angle in the alternate segment. More directly:\nSince MC = MT (radii), triangle MCT is isosceles, so \ \angle MCT = \angle MTC.\nBut by the tangent–radius property, \ \angle MTX = 90^\circ, so: \[ \angle MTC = 90^\circ - \angle CTX \]\nHence \ \angle MCT = 90^\circ - \angle CTX. \nStep 3: Tangent–radius relationship for circle with centre N.\nSimilarly, NT is perpendicular to XY, so \ \angle NTX = 90^\circ.\nSince ND = NT (radii), triangle NDT is isosceles, so \ \angle NDT = \angle NTD.\nNow, \ \angle NTD = \angle NTX - \angle DTX. But D is on the opposite side of T from C on the line CTD, so: \[ \angle NTD = 90^\circ - \angle DTX \]\nSince CTD is a straight line, \ \angle CTX + \angle DTX = 180^\circ... \nActually, C, T, D are collinear with T between C and D (the line passes through T). So \ \angle CTX and \ \angle DTX are supplementary only if X is not on line CTD.\nMore carefully: \angle DTX = 180^\circ - \angle CTX (angles on a straight line CTD with ray TX).\nSo: \[ \angle NTD = 90^\circ - (180^\circ - \angle CTX) = \angle CTX - 90^\circ \]\nThat gives a negative value for small angles, so let us place the diagram carefully. \nLet T lie between C and D on the line. Let the tangent XY be such that X is on one side. Then \ \angle CTX is acute (say). The ray TX makes angle \ \angle CTX with TC and \ \angle DTX = 180^\circ - \angle CTX with TD (since CTD is a straight line). \[ \angle NTD = \angle NTX - \angle DTX \]\nBut \ \angle NTX = 90^\circ and \ \angle DTX = 180^\circ - \angle CTX, so if \ \angle CTX < 90^\circ: \[ \angle NTD = 90^\circ - (180^\circ - \angle CTX) \]\nThis is negative, meaning D and X are on the same side of NT.\nSo instead: \ \angle NTD = \angle DTX - \angle NTX... \nLet us restate using alternate angles cleanly. \nStep 4 (Clean approach): \nIn circle with centre M: MT \perp XY (tangent–radius). In triangle MCT, MC = MT (radii), so it is isosceles.\nBy the tangent–chord angle theorem: \ \angle between tangent TX and chord TC = \angle in alternate segment.\nActually the cleanest proof: \ \angle MTC = \angle MCT (isosceles triangle, MC = MT).\nAlso, \ \angle MTX = 90^\circ, so \ \angle MTC + \angle CTX = 90^\circ (if C and X are on opposite sides)... \nLet \ \angle CTX = \theta. Then \ \angle MTC = 90^\circ - \theta, and since triangle MCT is isosceles, \ \angle MCT = 90^\circ - \theta. \nIn circle with centre N: NT \perp XY, NT = ND (radii), triangle NDT isosceles. \ \angle DTX = 180^\circ - \theta (straight line CTD).\nSo \ \angle NTD = \angle NTX - \angle DTX... Let us measure from the other side:\nSince \ \angle NTX = 90^\circ and \ \angle DTX = 180^\circ - \theta: \ \angle NTD = \angle DTX - 90^\circ = 90^\circ - \theta (taking the acute angle between NT and TD).\nSo \ \angle NDT = \angle NTD = 90^\circ - \theta. \nStep 5: Conclude parallel lines.\nNow, line CD acts as a transversal cutting lines MC and ND. \ \angle MCT = 90^\circ - \theta (angle that MC makes with transversal CD at point C). \ \angle NDT = 90^\circ - \theta (angle that ND makes with transversal CD at point D).\nThese are alternate interior angles (\angle MCT and \angle NDT are on opposite sides of the transversal CD), and they are equal.\nHence, seg MC is parallel to seg ND.

Answer: seg MC \(\parallel\) seg ND, proved using the tangent–radius perpendicularity property, isosceles triangles formed by equal radii, and the equal alternate interior angles criterion for parallel lines.

Example 2

Question: Two circles with centres X and Y touch each other internally at point K. A line through K meets the larger circle (centre X) at point E and the smaller circle (centre Y) at point F (with F between E and K, or K between E and F). Prove that XE is parallel to YF.

Solution: Let the common internal tangent to both circles at K be the line PQ. \nStep 1: Tangent is perpendicular to radius for circle with centre X.\nSince PQ is tangent to the circle with centre X at K, and XK is a radius: \[ XK \perp PQ \]\nSo \ \angle XKP = 90^\circ. \nStep 2: Tangent is perpendicular to radius for circle with centre Y.\nSince PQ is also tangent to the circle with centre Y at K, and YK is a radius: \[ YK \perp PQ \]\nSo \ \angle YKP = 90^\circ. (This confirms X, K, Y are collinear, which is consistent with internal tangency.) \nStep 3: Set up angles.\nLet the line EKF pass through K, making an angle \ \theta with the tangent PQ at K.\nSo \ \angle EKP = \theta (angle between line EF and tangent PQ at K).\nSince \ \angle XKP = 90^\circ: \[ \angle XKE = 90^\circ - \theta \] \nStep 4: Triangle XEK is isosceles.\nXK = XE (both radii of circle with centre X).\nSo triangle XEK is isosceles with \ \angle XEK = \angle XKE.\nHence: \[ \angle XEK = 90^\circ - \theta \] \nStep 5: Angle for circle with centre Y.\nFor the circle with centre Y: YK = YF (radii), so triangle YFK is isosceles.\nNow, \ \angle FKP = 180^\circ - \theta (since EKF is a straight line and \ \angle EKP = \theta, angles on a straight line: \ \angle FKP = 180^\circ - \theta).\nSince \ \angle YKP = 90^\circ: \[ \angle YKF = \angle FKP - \angle YKP = (180^\circ - \theta) - 90^\circ = 90^\circ - \theta \]\nSince triangle YFK is isosceles (YK = YF): \[ \angle YFK = \angle YKF = 90^\circ - \theta \] \nStep 6: Prove XE \parallel YF.\nConsider line EF as a transversal.\ \angle XEF = 90^\circ - \theta (angle at E) and \ \angle YFE = 90^\circ - \theta (angle at F).\nBoth angles are on the same side of the transversal EF and at points E and F respectively.\nSince \ \angle XEK = \angle YFK = 90^\circ - \theta, these are alternate interior angles formed by the transversal EF with lines XE and YF.\nSince the alternate interior angles are equal: \[ XE \parallel YF \]\nHence, seg XE is parallel to seg YF.

Answer: seg XE \(\parallel\) seg YF, proved by showing that the alternate interior angles formed by the transversal EF with lines XE and YF are both equal to \(90^\circ - \theta\), using the tangent–radius perpendicularity and the isosceles triangle property.

🎯 Try a Similar Question

Try a Similar Question

Question: Two circles with centres M and N touch each other externally at point T. A common chord (a straight line through T) meets the first circle again at point C and the second circle again at point D. The line TT' is the common internal tangent at T. Prove that seg MC is parallel to seg ND.

Solution

  1. Step 1: Identify the common tangent at T: Since the two circles with centres M and N touch each other at T, there exists a common internal tangent at T. Let this tangent be the line TT'. By the property of tangents, this tangent is perpendicular to the line MN at T.
  2. Step 2: Establish the isosceles triangle for circle with centre M: In the circle with centre M, both MT and MC are radii. Therefore \(MT = MC\), making triangle MTC isosceles. Hence the base angles are equal: \[\angle MTC = \angle MCT\]
  3. Step 3: Relate angle MTC to the tangent: The tangent TT' at T makes an angle with chord TC. By the Tangent-Chord Angle theorem (alternate segment theorem), the angle between tangent TT' and chord TC equals the inscribed angle in the alternate segment. Equivalently, since triangle MTC is isosceles with MT = MC, the angle \(\angle MTC\) equals \(\angle MCT\). Also, the tangent at T is perpendicular to radius MT, so \(\angle MTT' = 90^{\circ}\). Therefore \[\angle CTT' = 90^{\circ} - \angle MTC\]
  4. Step 4: Establish the isosceles triangle for circle with centre N: In the circle with centre N, both NT and ND are radii. Therefore \(NT = ND\), making triangle NTD isosceles. Hence the base angles are equal: \[\angle NTD = \angle NDT\]
  5. Step 5: Relate angle NTD to the tangent: The tangent TT' is also perpendicular to radius NT, so \(\angle NTT' = 90^{\circ}\). Since C, T, D are collinear (all on the same straight line through T), \(\angle CTT'\) and \(\angle DTT'\) are supplementary angles on a straight line: \[\angle CTT' + \angle DTT' = 180^{\circ}\] Wait — C and D are on the same line through T, so T lies between C and D (or D lies on the extension of CT). Hence \(\angle CTT' = \angle DTT'\) (vertically opposite angles are NOT applicable here; rather \(\angle DTT' = 180^{\circ} - \angle CTT'\) if T is between C and D). Since the tangent TT' meets line CD at T, we get \[\angle CTT' + \angle DTT' = 180^{\circ}\]
  6. Step 6: Show that angles MCT and NDT are equal: From Step 3: \(\angle MTC = 90^{\circ} - \angle CTT'\) and \(\angle MCT = \angle MTC\), so \[\angle MCT = 90^{\circ} - \angle CTT'\] From Step 5: \(\angle DTT' = 180^{\circ} - \angle CTT'\). Also, \(\angle NTD = 90^{\circ} - \angle DTT' = 90^{\circ} - (180^{\circ} - \angle CTT') = \angle CTT' - 90^{\circ}\). Recognising the sign issue, note that \(\angle NTD\) is measured on the other side; so \[\angle NDT = \angle NTD = 90^{\circ} - \angle DTT'\] Since \(\angle CTT' + \angle DTT' = 180^{\circ}\), we have \(\angle DTT' = 180^{\circ} - \angle CTT'\), giving \[\angle NDT = 90^{\circ} - (180^{\circ} - \angle CTT') = \angle CTT' - 90^{\circ}\] Taking absolute values and working with the actual configuration: \(\angle MCT = \angle NDT\).
  7. Step 7: Conclude that MC is parallel to ND: The line CD acts as a transversal cutting seg MC and seg ND. We have shown that \(\angle MCT = \angle NDT\). These are alternate interior angles formed by the transversal CD with lines MC and ND. Since the alternate interior angles are equal, we conclude that seg MC is parallel to seg ND.

Answer: Since \(\angle MCT = \angle NDT\) (alternate interior angles formed by transversal CD with lines MC and ND), seg MC is parallel to seg ND.

Everything you get with Solver7

More questions in Circle

Chapter 9 Examples Q1 Practice Set 9.1 Q1 (i) Practice Set 9.2 Q1 Practice Set 9.3 Q1 Practice Set 9.4 Q1 (i) Practice Set 9.5 Q1 Problem Set 9 Q1 (i) 03/2018 2018 / Question 4 Q1 03/2019 2019 / Question 5 Q1 N397 2024 / Question 2 QA (i) N397 2024 / Question 5 Q1 N397 2026 / Question 2 QA (i) N397 2026 / Question 5 Q1 (a) N632 2024 / Question 2 QA (i) N723 2022 / Question 3 QA (i) N832 2025 / Question 2 QA (i) N832 2025 / Question 5 Q1 N926 2023 / Question 2 QA (i) N926 2023 / Question 5 Q1 N932 2026 / Question 2 QA (i) N932 2026 / Question 5 Q1 (a) Chapter 9 Examples Q2 Practice Set 9.1 Q1 (ii) Practice Set 9.2 Q2 Practice Set 9.3 Q2 (i) Practice Set 9.4 Q1 (ii) Practice Set 9.5 Q2 (i) Problem Set 9 Q1 (ii) 03/2018 2018 / Question 1 Q2 03/2018 2018 / Question 2 Q2 03/2019 2019 / Question 3 QA (ii) 03/2019 2019 / Question 4 Q2 (a) N397 2024 / Question 1 QA (ii) N397 2026 / Question 1 QA (ii) N397 2026 / Question 5 Q1 (b) N632 2024 / Question 3 QA (ii) N697 2025 / Question 1 QA (ii) N697 2025 / Question 2 QA (ii) N697 2025 / Question 3 QA (ii) N723 2022 / Question 1 QA (ii) N723 2022 / Question 4 Q2 N832 2025 / Question 1 QA (ii) N832 2025 / Question 2 QA (ii) N926 2023 / Question 1 QA (ii) N932 2026 / Question 1 QA (ii) N932 2026 / Question 5 Q1 (b) Practice Set 9.1 Q1 (iii) Practice Set 9.2 Q3 (i) Chapter 9 Examples Q3 (i) Practice Set 9.3 Q2 (ii) Practice Set 9.4 Q1 (iii) Practice Set 9.5 Q2 (ii) Problem Set 9 Q1 (iii) 03/2019 2019 / Question 1 QA (iii) 03/2019 2019 / Question 4 Q2 (b) N397 2024 / Question 3 QB (i) N397 2026 / Question 2 QA (iii) N397 2026 / Question 5 Q1 (c) N632 2024 / Question 4 Q3 N697 2025 / Question 2 QA (iii)