SOLVER7 Study. Nothing Else.
2024 Board Paper Q2 (a)

\(AB\) is a chord of a circle with centre \(O.\) \(AOC\) is diameter of circle, \(AT\) is a tangent at \(A.\)
Write answers of the following questions :
Draw the figure using given information.

MAH STATE BOARD Mah SB Class 10 Maths · Circle

Solution

👶 Simple Explanation

Simple Explanation

Imagine drawing a clock face. The line going through the very middle is like the diameter, touching the circle at two ends. Pick any other spot on the circle's edge and draw a line to one end of the middle line — that is a chord. Now, at that same end of the middle line, draw a line standing straight up, like a wall. That wall just barely touches the circle at one point. That touching line is called a tangent, and it always stands perfectly upright against the radius.

Answer: The required figure has a circle with centre \( O \), diameter \( AOC \), chord \( AB \) joining \( A \) to a point \( B \) on the circle, and tangent \( AT \) drawn at \( A \) perpendicular to \( AC \).

📖 Drawing the Figure: Chord, Diameter and Tangent

Detailed Explanation

To draw this figure, we need to understand three key ideas about circles. First, a chord is a straight line segment whose both endpoints lie on the circle. Second, a diameter is a special chord that passes through the centre \( O \) of the circle; it is the longest chord. Third, a tangent to a circle is a line that touches the circle at exactly one point, called the point of contact. A very important property is that the tangent at any point of a circle is perpendicular to the radius (or diameter) drawn at the point of contact. So the tangent \( AT \) at point \( A \) must be perpendicular to \( AC \), meaning \( \angle TAC = 90^\circ \).

Formula Used

Key property used: Tangent \( \perp \) Radius at the point of contact, i.e. \( \angle OAT = 90^\circ \).

Solution

  1. Step 1: Draw a circle of any convenient radius and mark its centre as \( O \).
  2. Step 2: Draw a straight line passing through the centre \( O \) that meets the circle at two points. Label these points as \( A \) and \( C \). Then \( AOC \) is the diameter of the circle.
  3. Step 3: Choose another point \( B \) on the circle (not the same as \( A \) or \( C \)). Join \( A \) and \( B \) with a straight line segment. This segment \( AB \) is the required chord.
  4. Step 4: At point \( A \), draw a straight line perpendicular to the diameter \( AC \). This line touches the circle only at \( A \) and is the tangent. Mark any point on this line as \( T \), so the tangent is \( AT \).
  5. Step 5: Since \( AT \) is a tangent at \( A \) and \( AC \) is the diameter through \( A \), we have \( \angle TAC = 90^\circ \). Also, since \( \angle ABC \) is the angle in a semicircle, \( \angle ABC = 90^\circ \).

Final Answer

The required figure has a circle with centre \( O \), diameter \( AOC \), chord \( AB \) joining \( A \) to a point \( B \) on the circle, and tangent \( AT \) drawn at \( A \) perpendicular to \( AC \).

Common Mistake

A very common mistake is drawing the tangent \( AT \) as any slanting line through \( A \). Remember, the tangent at \( A \) must be perpendicular to the diameter \( AC \) at \( A \), i.e. \( \angle OAT = 90^\circ \).

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Draw a circle of any convenient radius and mark its centre as \( O \). — Reason: We need a circle first so that all the other elements (diameter, chord, tangent) can be placed on or around it.
  2. Step 2: Draw a straight line through \( O \) so that it meets the circle at two opposite points; label these points \( A \) and \( C \). The line segment \( AOC \) is now the diameter. — Reason: A diameter must pass through the centre, so placing it through \( O \) guarantees this condition is satisfied.
  3. Step 3: Choose any point \( B \) on the circle that is distinct from \( A \) and \( C \), then draw the line segment joining \( A \) to \( B \). The segment \( AB \) is the required chord. — Reason: A chord is defined as a line segment whose both endpoints lie on the circle, which \( AB \) satisfies by construction.
  4. Step 4: At point \( A \), draw a line that is perpendicular to the diameter \( AC \), so that the angle between this new line and \( AC \) equals \( 90^\circ \). — Reason: The fundamental tangent property states that a tangent to a circle is perpendicular to the radius (or diameter) at the point of contact; since \( A \) lies on the diameter \( AC \), the tangent at \( A \) must be perpendicular to \( AC \).
  5. Step 5: Mark any point on this perpendicular line as \( T \), so the tangent at \( A \) is named \( AT \). Verify that \( \angle TAC = 90^\circ \). — Reason: Naming the point \( T \) lets us refer to the tangent as line \( AT \), and confirming \( \angle TAC = 90^\circ \) checks that the tangent-perpendicular-to-diameter property holds correctly.

Final Answer

The required figure has a circle with centre \( O \), diameter \( AOC \), chord \( AB \) joining \( A \) to a point \( B \) on the circle, and tangent \( AT \) drawn at \( A \) perpendicular to \( AC \).

Common Mistake

One common mistake: Students sometimes draw the tangent \( AT \) at an angle other than \( 90^\circ \) to the diameter \( AC \), forgetting that the tangent must always be perpendicular to the radius (or diameter) at the point of contact.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Draw a circle with centre \( O \); draw diameter \( AOC \) through \( O \) meeting the circle at \( A \) and \( C \).
  2. Step 2: Mark point \( B \) on the circle; draw chord \( AB \).
  3. Step 3: At \( A \), draw line \( AT \) such that \( AT \perp AC \) (i.e. \( \angle TAC = 90^\circ \)); \( AT \) is the tangent at \( A \).

Answer: The required figure has a circle with centre \( O \), diameter \( AOC \), chord \( AB \) joining \( A \) to a point \( B \) on the circle, and tangent \( AT \) drawn at \( A \) perpendicular to \( AC \).

➕ More Examples

More Examples

Example 1

Question: PQ is a chord of a circle with centre O. POR is a diameter of the circle, and PT is a tangent at P. If the chord PQ makes an angle of 35° with the diameter POR (i.e., ∠QPR = 35°), find: (i) ∠QPT, (ii) ∠PQR, (iii) ∠QRT.

Solution: Step 1: Identify key properties. Since POR is a diameter and PT is the tangent at P, by the tangent-radius theorem, the radius OP is perpendicular to PT. Therefore \(\angle OPT = 90°\) , which means \(\angle RPT = 90°\). Step 2: Find ∠QPT. The chord PQ makes an angle \(\angle QPR = 35°\) with the diameter PR. Since \(\angle RPT = 90°\), we have: \(\angle QPT = \angle RPT - \angle QPR = 90° - 35° = 55°\). Step 3: Find ∠PQR. Since POR is a diameter, the angle in a semicircle gives us \(\angle PQR = 90°\) (angle subtended by diameter at the circumference). Step 4: Find ∠QRP. In triangle PQR, the angle sum gives: \(\angle QPR + \angle PQR + \angle QRP = 180°\). Substituting: \(35° + 90° + \angle QRP = 180°\), so \(\angle QRP = 55°\). Step 5: Find ∠QRT. Since PT is the tangent at P and POR is the diameter extended to T on the other side, ∠QRT is the angle between QR and the tangent direction. Note that ∠QRP = 55°, and since PT is a straight tangent line at P with ∠RPT = 90°, by the tangent-chord angle theorem, the angle between tangent PT and chord PQ equals the angle in the alternate segment: ∠QPT = ∠QRP = 55°. This confirms our earlier result. ∠QRT = ∠QRP = 55° (same angle). So: (i) \(\angle QPT = 55°\), (ii) \(\angle PQR = 90°\), (iii) \(\angle QRP = 55°\).

Answer: (i) ∠QPT = 55°, (ii) ∠PQR = 90°, (iii) ∠QRP = 55°

Example 2

Question: In a circle with centre O, MN is a chord and MOL is a diameter. MT is a tangent to the circle at M. If ∠NOM = 80°, find: (i) ∠NML, (ii) ∠MNL, (iii) ∠NMT.

Solution: Step 1: Find ∠NML using the inscribed angle theorem. The central angle ∠NOM = 80° subtends arc NM. The inscribed angle ∠NLM (angle at circumference) subtending the same arc NM would be half the central angle. However, we need ∠NML. Since MOL is a diameter, the angle ∠MNL is subtended by the diameter MOL, so \(\angle MNL = 90°\) (angle in a semicircle). Step 2: Find ∠NML. In triangle MNL: \(\angle MNL + \angle NML + \angle NLM = 180°\). The central angle \(\angle NOM = 80°\), so the inscribed angle on arc NM from point L is \(\angle NLM = \frac{80°}{2} = 40°\). Now substituting into the triangle angle sum: \(90° + \angle NML + 40° = 180°\), giving \(\angle NML = 50°\). Step 3: Find ∠NMT using the tangent-chord angle theorem. The angle between tangent MT and chord MN equals the angle in the alternate segment. The angle in the alternate segment is \(\angle NLM = 40°\). Therefore \(\angle NMT = 40°\). Verification: By the tangent-radius theorem, \(\angle LMT = 90°\). So \(\angle NMT = \angle LMT - \angle NML = 90° - 50° = 40°\). This confirms the result. So: (i) \(\angle NML = 50°\), (ii) \(\angle MNL = 90°\), (iii) \(\angle NMT = 40°\).

Answer: (i) ∠NML = 50°, (ii) ∠MNL = 90°, (iii) ∠NMT = 40°

🎯 Try a Similar Question

Try a Similar Question

Question: PQ is a chord of a circle with centre O. BOP is a diameter of the circle and PM is a tangent at point P. Draw a neat labelled figure using the given information and state the angle between the diameter BOP and the tangent PM.

Solution

  1. Step 1: Identify all given elements: We are given: a circle with centre O, a diameter BOP (so B, O, P are collinear and P lies on the circle), a chord PQ (joining point P to another point Q on the circle), and a tangent PM drawn at point P.
  2. Step 2: Recall the tangent-radius relationship: By the tangent-radius theorem, the tangent to a circle at any point is perpendicular to the radius at that point. Here, OP is the radius at point P (and also part of the diameter BOP).
  3. Step 3: Determine the angle between PM and BOP: Since PM is the tangent at P and OP is the radius at P, we have: \[ \angle OPM = 90^\circ \] Therefore the tangent PM is perpendicular to the diameter BOP at point P.
  4. Step 4: Describe the figure: The required figure shows a circle with centre O. The diameter BOP passes through the centre O with B and P as the two ends on the circle. Chord PQ connects point P to another point Q on the circle. Tangent PM is drawn at P such that PM is perpendicular to BP (the diameter) at P. The chord PQ makes an angle with the diameter at P that is different from 90°.

Answer: The required figure has a circle with centre O, diameter BOP with B and P as endpoints on the circle, chord PQ joining P to another point Q on the circle, and tangent PM drawn at P. The angle between the tangent PM and the diameter BOP is \( \angle OPM = 90^\circ \), since the tangent at any point is perpendicular to the radius at that point.

Everything you get with Solver7

More questions in Circle

Chapter 9 Examples Q1 Practice Set 9.1 Q1 (i) Practice Set 9.2 Q1 Practice Set 9.3 Q1 Practice Set 9.4 Q1 (i) Practice Set 9.5 Q1 Problem Set 9 Q1 (i) 03/2018 2018 / Question 4 Q1 03/2019 2019 / Question 5 Q1 N397 2024 / Question 2 QA (i) N397 2024 / Question 5 Q1 N397 2026 / Question 2 QA (i) N397 2026 / Question 5 Q1 (a) N632 2024 / Question 2 QA (i) N723 2022 / Question 3 QA (i) N832 2025 / Question 2 QA (i) N832 2025 / Question 5 Q1 N926 2023 / Question 2 QA (i) N926 2023 / Question 5 Q1 N932 2026 / Question 2 QA (i) N932 2026 / Question 5 Q1 (a) Chapter 9 Examples Q2 Practice Set 9.1 Q1 (ii) Practice Set 9.2 Q2 Practice Set 9.3 Q2 (i) Practice Set 9.4 Q1 (ii) Practice Set 9.5 Q2 (i) Problem Set 9 Q1 (ii) 03/2018 2018 / Question 1 Q2 03/2018 2018 / Question 2 Q2 03/2019 2019 / Question 3 QA (ii) 03/2019 2019 / Question 4 Q2 (a) N397 2024 / Question 1 QA (ii) N397 2026 / Question 1 QA (ii) N397 2026 / Question 5 Q1 (b) N632 2024 / Question 3 QA (ii) N697 2025 / Question 1 QA (ii) N697 2025 / Question 2 QA (ii) N697 2025 / Question 3 QA (ii) N723 2022 / Question 1 QA (ii) N723 2022 / Question 4 Q2 N832 2025 / Question 1 QA (ii) N832 2025 / Question 2 QA (ii) N926 2023 / Question 1 QA (ii) N932 2026 / Question 1 QA (ii) N932 2026 / Question 5 Q1 (b) Practice Set 9.1 Q1 (iii) Practice Set 9.2 Q3 (i) Chapter 9 Examples Q3 (i) Practice Set 9.3 Q2 (ii) Practice Set 9.4 Q1 (iii) Practice Set 9.5 Q2 (ii) Problem Set 9 Q1 (iii) 03/2019 2019 / Question 1 QA (iii) 03/2019 2019 / Question 4 Q2 (b) N397 2024 / Question 3 QB (i) N397 2026 / Question 2 QA (iii) N397 2026 / Question 5 Q1 (c) N632 2024 / Question 4 Q3 N697 2025 / Question 2 QA (iii)