SOLVER7 Study. Nothing Else.
2026 Board Paper QB (iii)

Draw a circle of radius \(3.3\ cm.\) Draw a chord \(PQ\) of length \(6.6\ cm.\) Draw tangents to the circle at point \(P\) and \(Q.\) Write your observation about the tangents.

MAH STATE BOARD Mah SB Class 10 Maths · Circle

Solution

👶 Simple Explanation

Simple Explanation

Imagine a clock face with a line drawn straight through the middle — that line is called a diameter. Here, the chord PQ is exactly as long as the full width of the circle, so it goes right through the centre. At each end of that line, draw a touching line that just grazes the circle's edge. Both touching lines lean at the same angle away from the diameter. Because they both stand perfectly upright against the same flat line, they never meet — just like two walls facing each other across a room stay perfectly parallel.

Answer: The two tangents drawn at the endpoints P and Q of the chord (which is actually the diameter, since \( PQ = 6.6 = 2 \times 3.3 \) cm) are parallel to each other.

📖 Constructing Tangents at the Endpoints of a Chord

Detailed Explanation

A tangent to a circle is a straight line that touches the circle at exactly one point. A very important property is that the tangent at any point on the circle is perpendicular to the radius drawn to that point of contact. In this problem, the chord PQ has length 6.6 cm, which is exactly \( 2 \times 3.3 = 6.6 \) cm, the diameter of the circle. So PQ is not just any chord — it is a diameter. When we draw tangents at the two endpoints of a diameter, both tangents are perpendicular to the same line (the diameter). Two lines perpendicular to the same line are parallel to each other. That is the key observation here.

Formula Used

Tangent at any point of a circle is perpendicular to the radius at the point of contact. Also, diameter \( = 2 \times \) radius \( = 2 \times 3.3 = 6.6 \) cm.

Solution

  1. Step 1: Draw the circle. Mark a point O on the page as the centre. Using a compass with radius 3.3 cm, draw a circle with centre O.
  2. Step 2: Compare the chord length with the diameter. The diameter of the circle is \( 2 \times 3.3 = 6.6 \) cm. The required chord PQ also has length 6.6 cm. So PQ must be a diameter and must pass through the centre O.
  3. Step 3: Draw the chord PQ. Draw any straight line through the centre O. Let it cut the circle at points P and Q. Then \( PQ = 6.6 \) cm, which is the required chord (and also the diameter).
  4. Step 4: Draw the tangent at P. Since a tangent is perpendicular to the radius at the point of contact, we need a line through P that is perpendicular to OP (which is the same as PQ). Place a set-square or use the compass method to construct a line through P that makes an angle of \( 90^\circ \) with PQ. Call this tangent line \( l \).
  5. Step 5: Draw the tangent at Q. Similarly, construct a line through Q that is perpendicular to PQ (because OQ lies along PQ). Call this tangent line \( m \).
  6. Step 6: Observe the two tangents. Both tangent lines \( l \) and \( m \) are perpendicular to the same straight line PQ. Two lines that are perpendicular to the same line are parallel to each other. Therefore, \( l \parallel m \).

Final Answer

The two tangents drawn at the endpoints P and Q of the chord (which is actually the diameter, since \( PQ = 6.6 = 2 \times 3.3 \) cm) are parallel to each other.

Common Mistake

A common mistake is to treat PQ as an ordinary chord and try to locate the centre separately for each tangent, missing the fact that \( PQ = 6.6 \) cm equals the diameter. Because PQ passes through the centre, the tangents at P and Q are automatically perpendicular to PQ and hence parallel — students often report them as 'intersecting' by drawing them inaccurately.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Identify the radius and compute the diameter. The radius is given as 3.3 cm, so the diameter is \( 2 \times 3.3 = 6.6 \) cm. — Reason: We need to compare the diameter with the chord length PQ to understand what kind of chord PQ really is.
  2. Step 2: Compare the chord PQ with the diameter. The chord length is given as 6.6 cm, and the diameter is also \( 6.6 \) cm. Since \( PQ = 6.6 \) cm equals the diameter, PQ must pass through the centre O. — Reason: The longest possible chord in any circle is the diameter, so a chord equal in length to the diameter must itself be a diameter.
  3. Step 3: Draw the circle and the diameter PQ. Set your compass to radius \( 3.3 \) cm, mark the centre O, and draw the circle. Then draw a straight line through O cutting the circle at points P and Q, giving \( PQ = 6.6 \) cm. — Reason: This construction confirms PQ is a diameter and fixes the positions of P and Q on the circle.
  4. Step 4: Draw the tangent at point P. Using a set square or protractor, draw a line through P that is perpendicular to the radius OP. Call this tangent line \( t_1 \). — Reason: By the tangent-radius theorem, the tangent at any point on a circle must be perpendicular to the radius at that point, so \( t_1 \perp OP \).
  5. Step 5: Draw the tangent at point Q. Similarly, draw a line through Q that is perpendicular to the radius OQ. Call this tangent line \( t_2 \). Since O lies between P and Q on the diameter, the radius OQ points in the exact opposite direction to OP, but \( t_2 \) is still perpendicular to the line PQ. — Reason: The tangent-radius rule applies at Q just as it did at P, so \( t_2 \perp OQ \).
  6. Step 6: Check the relationship between \( t_1 \) and \( t_2 \). Both \( t_1 \) and \( t_2 \) are perpendicular to the same straight line PQ. Because two distinct lines that are each perpendicular to the same line are parallel, we conclude \( t_1 \parallel t_2 \). — Reason: This is a standard geometry result: if \( t_1 \perp PQ \) and \( t_2 \perp PQ \), then \( t_1 \parallel t_2 \).

Final Answer

The two tangents drawn at the endpoints P and Q of the chord (which is actually the diameter, since \( PQ = 6.6 = 2 \times 3.3 \) cm) are parallel to each other.

Common Mistake

One common mistake: Students sometimes assume that any chord of length 6.6 cm exists separately from the diameter, not realising that since \( 6.6 = 2 \times 3.3 \) cm equals the diameter, there is only one such chord and it must pass through the centre — making it a diameter, not just an ordinary chord.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Diameter of circle \( = 2 \times 3.3 = 6.6 \) cm \( = PQ \), so chord PQ is a diameter passing through centre O.
  2. Step 2: Tangent at P is perpendicular to radius OP, and tangent at Q is perpendicular to radius OQ. Since OP and OQ lie along the same diameter, both tangents are perpendicular to PQ.
  3. Step 3: Two lines each perpendicular to the same line are parallel to each other, so the tangent at P \( \parallel \) tangent at Q.

Answer: The two tangents drawn at the endpoints P and Q of the chord (which is actually the diameter, since \( PQ = 6.6 = 2 \times 3.3 \) cm) are parallel to each other.

➕ More Examples

More Examples

Example 1

Question: Draw a circle of radius \( 2.5 \) cm. Draw a chord \( AB \) of length \( 5 \) cm. Construct tangents to the circle at points \( A \) and \( B \). What do you observe about the two tangents?

Solution: Step 1 — Draw the circle. Draw a circle with centre \( O \) and radius \( r = 2.5 \) cm. \nStep 2 — Identify the chord length vs diameter. The diameter of the circle is \[ d = 2 \times 2.5 = 5 \text{ cm.} \] The chord \( AB = 5 \) cm equals the diameter, so \( AB \) is itself a diameter and \( O \) lies on \( AB \). \nStep 3 — Draw the chord. Mark point \( A \) on the circle, then mark \( B \) diametrically opposite to \( A \) so that \( AB = 5 \) cm passes through \( O \). \nStep 4 — Construct the tangent at \( A \). The radius \( OA \) points along \( AB \). Draw a line through \( A \) perpendicular to \( OA \); this is the tangent at \( A \). \nStep 5 — Construct the tangent at \( B \). Similarly, draw a line through \( B \) perpendicular to \( OB \) (which is along the same line \( AB \)); this is the tangent at \( B \). \nStep 6 — Observation. Both tangents are perpendicular to the diameter \( AB \). Two lines each perpendicular to the same straight line are parallel to each other. Therefore, the tangent at \( A \) is parallel to the tangent at \( B \).

Answer: The two tangents drawn at the ends of the diameter are parallel to each other.

Example 2

Question: Draw a circle of radius \( 3 \) cm. Draw a chord \( XY \) of length \( 6 \) cm. Construct tangents to the circle at \( X \) and \( Y \). State and justify your observation about the tangents.

Solution: Step 1 — Draw the circle. Draw a circle with centre \( O \) and radius \( r = 3 \) cm. \nStep 2 — Compare chord with diameter. The diameter is \[ d = 2 \times 3 = 6 \text{ cm.} \] Since \( XY = 6 \) cm \( = d \), the chord \( XY \) is a diameter, passing through the centre \( O \). \nStep 3 — Draw the chord. Place \( X \) on the circle and mark \( Y \) diametrically opposite, so \( XY \) passes through \( O \) with length \( 6 \) cm. \nStep 4 — Tangent at \( X \). By the tangent–radius theorem, the tangent at \( X \) is perpendicular to radius \( OX \). Draw the tangent \( t_1 \) through \( X \) perpendicular to \( XY \). \nStep 5 — Tangent at \( Y \). Similarly, draw the tangent \( t_2 \) through \( Y \) perpendicular to \( OY \) (i.e., perpendicular to \( XY \)). \nStep 6 — Justification. We have \( t_1 \perp XY \) and \( t_2 \perp XY \). Since both tangents are perpendicular to the same line \( XY \), they must be parallel: \[ t_1 \parallel t_2. \] The distance between the two parallel tangents equals the diameter \[ = 6 \text{ cm.} \]

Answer: The tangents at \( X \) and \( Y \) are parallel to each other (and \( 6 \) cm apart), because the chord \( XY \) is a diameter and each tangent is perpendicular to it.

🎯 Try a Similar Question

Try a Similar Question

Question: Draw a circle of radius \( 4\ \text{cm} \). Draw a chord \( AB \) of length \( 5\ \text{cm} \). Construct tangents to the circle at points \( A \) and \( B \). Write your observation about the two tangents. Do they meet? If so, where?

Solution

  1. Step 1: Check whether AB is a diameter: The radius of the circle is \( r = 4\ \text{cm} \), so the diameter is \( 2r = 8\ \text{cm} \). The chord \( AB = 5\ \text{cm} \), which is less than \( 8\ \text{cm} \). Therefore, \( AB \) is NOT a diameter.
  2. Step 2: Recall the condition for parallel tangents: Tangents drawn at the two endpoints of a chord are parallel to each other if and only if the chord is a diameter. Since \( AB \ne 8\ \text{cm} \), this condition is NOT satisfied.
  3. Step 3: Draw the tangents at A and B: At each endpoint of chord \( AB \), draw the radius to that point (i.e., \( OA \) and \( OB \)), then construct a line perpendicular to the radius at that point. The perpendicular at \( A \) is the tangent at \( A \), and the perpendicular at \( B \) is the tangent at \( B \).
  4. Step 4: Observe the angle between OA and OB: Using the chord length formula, the angle \( \angle AOB \) subtended at the centre satisfies \[ \sin\!\left(\frac{\angle AOB}{2}\right) = \frac{AB/2}{r} = \frac{2.5}{4} = 0.625. \] So \( \frac{\angle AOB}{2} \approx 38.7^\circ \), giving \( \angle AOB \approx 77.4^\circ \). Because \( \angle AOB \ne 180^\circ \), the two radii are not collinear, and the two tangents are NOT parallel.
  5. Step 5: Conclude where the tangents meet: Since \( \angle AOB \approx 77.4^\circ \ne 180^\circ \), the two tangents at \( A \) and \( B \) are inclined to each other and intersect at a point \( P \) outside the circle. The angle between them is \[ \angle APB = 180^\circ - \angle AOB \approx 180^\circ - 77.4^\circ = 102.6^\circ. \]

Answer: The two tangents drawn at the endpoints \( A \) and \( B \) of the chord (which is NOT a diameter, since \( AB = 5\ \text{cm} \ne 2 \times 4 = 8\ \text{cm} \)) are NOT parallel; they meet at a point outside the circle.

Everything you get with Solver7

More questions in Circle

Chapter 9 Examples Q1 Practice Set 9.1 Q1 (i) Practice Set 9.2 Q1 Practice Set 9.3 Q1 Practice Set 9.4 Q1 (i) Practice Set 9.5 Q1 Problem Set 9 Q1 (i) 03/2018 2018 / Question 4 Q1 03/2019 2019 / Question 5 Q1 N397 2024 / Question 2 QA (i) N397 2024 / Question 5 Q1 N397 2026 / Question 2 QA (i) N397 2026 / Question 5 Q1 (a) N632 2024 / Question 2 QA (i) N723 2022 / Question 3 QA (i) N832 2025 / Question 2 QA (i) N832 2025 / Question 5 Q1 N926 2023 / Question 2 QA (i) N926 2023 / Question 5 Q1 N932 2026 / Question 2 QA (i) N932 2026 / Question 5 Q1 (a) Chapter 9 Examples Q2 Practice Set 9.1 Q1 (ii) Practice Set 9.2 Q2 Practice Set 9.3 Q2 (i) Practice Set 9.4 Q1 (ii) Practice Set 9.5 Q2 (i) Problem Set 9 Q1 (ii) 03/2018 2018 / Question 1 Q2 03/2018 2018 / Question 2 Q2 03/2019 2019 / Question 3 QA (ii) 03/2019 2019 / Question 4 Q2 (a) N397 2024 / Question 1 QA (ii) N397 2026 / Question 1 QA (ii) N397 2026 / Question 5 Q1 (b) N632 2024 / Question 3 QA (ii) N697 2025 / Question 1 QA (ii) N697 2025 / Question 2 QA (ii) N697 2025 / Question 3 QA (ii) N723 2022 / Question 1 QA (ii) N723 2022 / Question 4 Q2 N832 2025 / Question 1 QA (ii) N832 2025 / Question 2 QA (ii) N926 2023 / Question 1 QA (ii) N932 2026 / Question 1 QA (ii) N932 2026 / Question 5 Q1 (b) Practice Set 9.1 Q1 (iii) Practice Set 9.2 Q3 (i) Chapter 9 Examples Q3 (i) Practice Set 9.3 Q2 (ii) Practice Set 9.4 Q1 (iii) Practice Set 9.5 Q2 (ii) Problem Set 9 Q1 (iii) 03/2019 2019 / Question 1 QA (iii) 03/2019 2019 / Question 4 Q2 (b) N397 2024 / Question 3 QB (i) N397 2026 / Question 2 QA (iii) N397 2026 / Question 5 Q1 (c) N632 2024 / Question 4 Q3 N697 2025 / Question 2 QA (iii)