SOLVER7 Study. Nothing Else.
Chapter 9 Examples Q11

In figure \(3.76,\) seg \(PQ\) is a diameter of a circle with centre \(O.\) \(R\) is any point on the circle. seg \(RS\perp\) seg \(PQ.\) Prove that, \(SR\) is the geometric mean of \(PS\) and \(SQ\)
\([\) That is, \(SR^2=PS\times SQ]\)

MAH STATE BOARD Mah SB Class 10 Maths · Circle

Solution

👶 Simple Explanation

Simple Explanation

Imagine a circle with a straight line going right through its middle. Any point on the edge of the circle makes a perfect right angle with the two ends of that line. Now draw a short line straight down from that edge point to the middle line. This tiny line is special. It fits perfectly between the two pieces it cuts. The short line multiplied by itself equals one piece multiplied by the other piece. That special fitting is called the geometric mean.

Answer: By using the property that the angle in a semicircle is \(90^\circ\) and by proving \(\triangle PSR \sim \triangle RSQ\) (AA test), we obtain \(\dfrac{PS}{SR} = \dfrac{SR}{SQ}\), which gives \(SR^2 = PS \times SQ\). Hence SR is the geometric mean of PS and SQ.

📖 Geometric Mean in a Circle (Right Angle in Semicircle)

Detailed Explanation

This problem uses two very important circle and triangle properties. First, the angle inscribed in a semicircle is always a right angle. Since PQ is a diameter and R lies on the circle, the angle \(\angle PRQ = 90^\circ\). This makes \(\triangle PRQ\) a right-angled triangle with the right angle at R. Second, when we drop a perpendicular from the right-angle vertex to the hypotenuse (here RS drawn from R perpendicular to PQ), it creates two smaller triangles that are similar to the original triangle and to each other. This is called the Property of Geometric Mean (or the Right-Angled Triangle Altitude Theorem). From similar triangles, corresponding sides are in proportion, and this proportion gives us the required result \(SR^2 = PS \times SQ\).

Formula Used

Property of Geometric Mean: In a right triangle, the altitude drawn from the right angle to the hypotenuse is the geometric mean of the two segments of the hypotenuse. \[SR^2 = PS \times SQ\]

Solution

  1. Step 1: Identify the right angle at R: Since PQ is a diameter of the circle and R lies on the circle, angle PRQ is an angle inscribed in a semicircle. By the theorem 'angle inscribed in a semicircle is a right angle', we get \(\angle PRQ = 90^\circ\). So \(\triangle PRQ\) is a right-angled triangle, right-angled at R.
  2. Step 2: Consider triangles PSR and RSQ: In \(\triangle PSR\) and \(\triangle RSQ\): \(\angle PSR = \angle RSQ = 90^\circ\) because RS is perpendicular to PQ. Let \(\angle RPS = x\). Then in \(\triangle PSR\), \(\angle PRS = 90^\circ - x\). Also, in \(\triangle PRQ\), since \(\angle PRQ = 90^\circ\) and \(\angle RPQ = x\), we get \(\angle RQP = 90^\circ - x\). So \(\angle SRQ = 90^\circ - \angle RQS = 90^\circ - (90^\circ - x) = x\).
  3. Step 3: Prove the two triangles are similar: In \(\triangle PSR\) and \(\triangle RSQ\): \(\angle PSR = \angle RSQ = 90^\circ\) and \(\angle SPR = \angle SRQ = x\). By the AA (Angle-Angle) test of similarity, \(\triangle PSR \sim \triangle RSQ\).
  4. Step 4: Write the ratio of corresponding sides: Since the triangles are similar, corresponding sides are in proportion. Matching the vertices carefully: P \(\leftrightarrow\) R, S \(\leftrightarrow\) S, R \(\leftrightarrow\) Q. Therefore, \[\dfrac{PS}{RS} = \dfrac{SR}{SQ}\]
  5. Step 5: Cross-multiply to obtain the required result: Cross-multiplying the proportion: \[SR \times SR = PS \times SQ\] which gives \[SR^2 = PS \times SQ\] Hence, SR is the geometric mean of PS and SQ. Proved.

Final Answer

By using the property that the angle in a semicircle is \(90^\circ\) and by proving \(\triangle PSR \sim \triangle RSQ\) (AA test), we obtain \(\dfrac{PS}{SR} = \dfrac{SR}{SQ}\), which gives \(SR^2 = PS \times SQ\). Hence SR is the geometric mean of PS and SQ.

Common Mistake

A very common mistake is to match the vertices of the similar triangles incorrectly and write the wrong proportion (for example \(\dfrac{PS}{SR} = \dfrac{SQ}{SR}\)). Always match the equal angles carefully — the vertex with the right angle in one triangle must correspond to the vertex with the right angle in the other triangle.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Observe that PQ is a diameter of the circle and R is a point on the circle. By the theorem that states the angle inscribed in a semicircle is always a right angle, we conclude that \(\angle PRQ = 90^\circ\). — Reason: This gives us a right-angled triangle to work with, which is the foundation of the entire proof.
  2. Step 2: RS is drawn perpendicular to PQ, so S is the foot of the perpendicular from R onto PQ. This means \(\angle RSP = \angle RSQ = 90^\circ\). — Reason: Establishing these right angles at S is essential because they will act as one of the two matching angles when we compare the smaller triangles.
  3. Step 3: Now examine \(\triangle PSR\) and \(\triangle RSQ\) separately. In \(\triangle PSR\), let \(\angle RPS = \alpha\). Since the angles of \(\triangle PRQ\) sum to \(180^\circ\) and \(\angle PRQ = 90^\circ\), we have \(\angle PQR = 90^\circ - \alpha\). — Reason: Labelling one acute angle lets us track both acute angles of the original right triangle through the two smaller triangles.
  4. Step 4: In \(\triangle PSR\): the angles are \(\angle PSR = 90^\circ\), \(\angle RPS = \alpha\), so the remaining angle is \(\angle PRS = 90^\circ - \alpha\). In \(\triangle RSQ\): the angles are \(\angle RSQ = 90^\circ\), \(\angle RQS = 90^\circ - \alpha\), so the remaining angle is \(\angle QRS = \alpha\). — Reason: Listing all three angles in each triangle makes it easy to spot the matching pairs for the similarity test.
  5. Step 5: Comparing the two triangles, \(\angle PSR = \angle RSQ = 90^\circ\) and \(\angle RPS = \angle QRS = \alpha\). Since two pairs of angles match, by the AA (Angle–Angle) similarity criterion: \[\triangle PSR \sim \triangle RSQ\] — Reason: Two matching angles are sufficient to declare full similarity, which then guarantees all corresponding sides are proportional.
  6. Step 6: From the similarity \(\triangle PSR \sim \triangle RSQ\), write the ratio of corresponding sides: \[\frac{PS}{SR} = \frac{SR}{SQ}\] — Reason: In similar triangles, corresponding sides are in proportion. Here PS and SR correspond to SR and SQ respectively, placing SR in both positions of the ratio.
  7. Step 7: Cross-multiply the proportion to get: \[SR^2 = PS \times SQ\] Taking square roots on both sides, \(SR = \sqrt{PS \times SQ}\), which is the geometric mean of PS and SQ. — Reason: Cross-multiplication converts the proportion into the required product form, directly establishing SR as the geometric mean.

Final Answer

By using the property that the angle in a semicircle is \(90^\circ\) and by proving \(\triangle PSR \sim \triangle RSQ\) (AA test), we obtain \(\dfrac{PS}{SR} = \dfrac{SR}{SQ}\), which gives \(SR^2 = PS \times SQ\). Hence SR is the geometric mean of PS and SQ.

Common Mistake

One common mistake: Students often write the similarity as \(\triangle PSR \sim \triangle SRQ\) without carefully matching the vertices in the correct order, which leads to an incorrect proportion and a wrong final result. Always match vertices whose angles are equal: \(P \leftrightarrow R\), \(S \leftrightarrow S\), \(R \leftrightarrow Q\).

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: PQ is a diameter, R lies on the circle, so \( \angle PRQ = 90^\circ \) (angle in a semicircle). RS is perpendicular to PQ, so \( \angle PSR = \angle RSQ = 90^\circ \).
  2. Step 2: In \( \triangle PSR \) and \( \triangle RSQ \): \( \angle PSR = \angle RSQ = 90^\circ \) and \( \angle RPS = \angle QRS \) (since \( \angle PRQ = 90^\circ \) gives \( \angle QRS = 90^\circ - \angle RQS = \angle RPS \)). By AA, \( \triangle PSR \sim \triangle RSQ \).
  3. Step 3: From the similarity: \( \dfrac{PS}{SR} = \dfrac{SR}{SQ} \), which gives \( SR^2 = PS \times SQ \).

Answer: By using the property that the angle in a semicircle is \(90^\circ\) and by proving \(\triangle PSR \sim \triangle RSQ\) (AA test), we obtain \(\dfrac{PS}{SR} = \dfrac{SR}{SQ}\), which gives \(SR^2 = PS \times SQ\). Hence SR is the geometric mean of PS and SQ.

➕ More Examples

More Examples

Example 1

Question: Seg AB is a diameter of a circle with centre O. T is any point on the circle. Seg TM is drawn perpendicular to seg AB, where M lies on AB. Prove that \( TM^2 = AM \times MB \).

Solution: Given: AB is a diameter of the circle with centre O. T is a point on the circle. TM ⊥ AB, where M is on AB. To prove: \( TM^2 = AM \times MB \). Since AB is a diameter, the angle subtended by AB at any point on the circle is 90°. Therefore, \( \angle ATB = 90^\circ \). Now consider triangles \( \triangle ATM \) and \( \triangle TBM \). In \( \triangle ATB \), TM is the altitude drawn from the right angle T to the hypotenuse AB. In \( \triangle ATM \): \( \angle AMT = 90^\circ \) (given, since TM ⊥ AB). In \( \triangle TBM \): \( \angle TMB = 90^\circ \). Also, \( \angle TAM = \angle TAB \) is common to \( \triangle ATM \) and we compare with \( \triangle ATB \). Consider \( \triangle AMT \) and \( \triangle TMB \): \( \angle AMT = \angle TMB = 90^\circ \). In \( \triangle ATB \), \( \angle ATM + \angle MTB = 90^\circ \) and \( \angle TAM + \angle ATM = 90^\circ \) (angles of \( \triangle ATM \)), so \( \angle MTB = \angle TAM \). Therefore, in \( \triangle AMT \) and \( \triangle TMB \): \( \angle AMT = \angle TMB = 90^\circ \) and \( \angle MAT = \angle MTB \). By AA test, \( \triangle AMT \sim \triangle TMB \). Since corresponding sides of similar triangles are proportional: \[ \frac{AM}{TM} = \frac{TM}{MB} \] Cross-multiplying: \[ TM^2 = AM \times MB \] Hence proved.

Answer: \( TM^2 = AM \times MB \) is proved using AA similarity: \( \triangle AMT \sim \triangle TMB \), giving \( \frac{AM}{TM} = \frac{TM}{MB} \), so \( TM^2 = AM \times MB \).

Example 2

Question: In the figure, PQ is a diameter of a circle with centre O. C is a point on the circle such that seg CD ⊥ seg PQ, where D is on PQ. If \( PD = 4 \) cm and \( DQ = 9 \) cm, find the length of CD. Also verify that CD is the geometric mean of PD and DQ.

Solution: Given: PQ is a diameter, C is on the circle, CD ⊥ PQ, PD = 4 cm, DQ = 9 cm. Step 1: Since PQ is a diameter, \( \angle PCQ = 90^\circ \) (angle in a semicircle). Step 2: In \( \triangle PCQ \), CD is the altitude from the right angle C to hypotenuse PQ. Step 3: By the geometric mean relation for a right triangle (altitude on hypotenuse), \[ CD^2 = PD \times DQ \] Substituting the values: \[ CD^2 = 4 \times 9 \] \[ CD^2 = 36 \] Taking the positive square root: \[ CD = \sqrt{36} = 6 \text{ cm} \] Step 4: Verification — \( PD \times DQ = 4 \times 9 = 36 \) and \( CD^2 = 6^2 = 36 \). Since \( CD^2 = PD \times DQ \), CD is indeed the geometric mean of PD and DQ. Proof of the relation: Since AB is a diameter, \( \angle PCQ = 90^\circ \). In \( \triangle PDC \) and \( \triangle CDQ \): \( \angle PDC = \angle CDQ = 90^\circ \), and \( \angle DPC = \angle DCQ \) (since \( \angle PCQ = 90^\circ \) means \( \angle PCD + \angle DCQ = 90^\circ \) and similarly \( \angle CPD + \angle PCD = 90^\circ \), giving \( \angle CPD = \angle DCQ \)). By AA similarity, \( \triangle PDC \sim \triangle CDQ \), so \[ \frac{PD}{CD} = \frac{CD}{DQ} \] Therefore \[ CD^2 = PD \times DQ = 4 \times 9 = 36 \] and \[ CD = 6 \text{ cm} \]

Answer: \( CD = 6 \) cm, and \( CD^2 = PD \times DQ \) is verified since \( 6^2 = 4 \times 9 = 36 \).

🎯 Try a Similar Question

Try a Similar Question

Question: In the figure, seg AB is a diameter of a circle with centre O. T is any point on the circle other than A and B. seg TM is perpendicular to seg AB, where M lies on AB. Prove that TM is the geometric mean of AM and MB, that is, prove that \( TM^2 = AM \times MB \).

Solution

  1. Step 1: Identify the angle in a semicircle: Since AB is a diameter of the circle and T is any point on the circle, by the theorem 'angle in a semicircle is a right angle', we have \( \angle ATB = 90^\circ \).
  2. Step 2: Note the given perpendicular: It is given that \( TM \perp AB \), so \( \angle TMA = 90^\circ \) and \( \angle TMB = 90^\circ \).
  3. Step 3: Consider triangles ATM and TBM: Consider \( \triangle ATM \) and \( \triangle TBM \). We will show these two triangles are similar using the AA test.
  4. Step 4: Apply AA similarity: In \( \triangle ATM \) and \( \triangle TBM \): First, \( \angle TMA = \angle TMB = 90^\circ \) (since \( TM \perp AB \)). Second, in \( \triangle ATB \), since \( \angle ATB = 90^\circ \) and \( TM \perp AB \), we get \( \angle TAM + \angle ATM = 90^\circ \) and \( \angle TBM + \angle BTM = 90^\circ \). Also, \( \angle ATM + \angle BTM = 90^\circ \). From these, \( \angle TAM = \angle BTM \). So, \( \angle MAT = \angle MTB \). By AA test, \( \triangle ATM \sim \triangle TBM \).
  5. Step 5: Write the proportionality of sides: Since \( \triangle ATM \sim \triangle TBM \), their corresponding sides are proportional: \[ \frac{AM}{TM} = \frac{TM}{MB} \]
  6. Step 6: Conclude the geometric mean result: Cross-multiplying the proportion gives \[ TM^2 = AM \times MB \] Hence, TM is the geometric mean of AM and MB. This completes the proof.

Answer: Since \( \angle ATB = 90^\circ \) (angle in a semicircle) and \( TM \perp AB \), we prove \( \triangle ATM \sim \triangle TBM \) by the AA test (right angle and a common acute angle). Therefore \( \dfrac{AM}{TM} = \dfrac{TM}{MB} \), which gives \( TM^2 = AM \times MB \). Hence TM is the geometric mean of AM and MB.

Everything you get with Solver7

More questions in Circle

Chapter 9 Examples Q1 Practice Set 9.1 Q1 (i) Practice Set 9.2 Q1 Practice Set 9.3 Q1 Practice Set 9.4 Q1 (i) Practice Set 9.5 Q1 Problem Set 9 Q1 (i) 03/2018 2018 / Question 4 Q1 03/2019 2019 / Question 5 Q1 N397 2024 / Question 2 QA (i) N397 2024 / Question 5 Q1 N397 2026 / Question 2 QA (i) N397 2026 / Question 5 Q1 (a) N632 2024 / Question 2 QA (i) N723 2022 / Question 3 QA (i) N832 2025 / Question 2 QA (i) N832 2025 / Question 5 Q1 N926 2023 / Question 2 QA (i) N926 2023 / Question 5 Q1 N932 2026 / Question 2 QA (i) N932 2026 / Question 5 Q1 (a) Chapter 9 Examples Q2 Practice Set 9.1 Q1 (ii) Practice Set 9.2 Q2 Practice Set 9.3 Q2 (i) Practice Set 9.4 Q1 (ii) Practice Set 9.5 Q2 (i) Problem Set 9 Q1 (ii) 03/2018 2018 / Question 1 Q2 03/2018 2018 / Question 2 Q2 03/2019 2019 / Question 3 QA (ii) 03/2019 2019 / Question 4 Q2 (a) N397 2024 / Question 1 QA (ii) N397 2026 / Question 1 QA (ii) N397 2026 / Question 5 Q1 (b) N632 2024 / Question 3 QA (ii) N697 2025 / Question 1 QA (ii) N697 2025 / Question 2 QA (ii) N697 2025 / Question 3 QA (ii) N723 2022 / Question 1 QA (ii) N723 2022 / Question 4 Q2 N832 2025 / Question 1 QA (ii) N832 2025 / Question 2 QA (ii) N926 2023 / Question 1 QA (ii) N932 2026 / Question 1 QA (ii) N932 2026 / Question 5 Q1 (b) Practice Set 9.1 Q1 (iii) Practice Set 9.2 Q3 (i) Chapter 9 Examples Q3 (i) Practice Set 9.3 Q2 (ii) Practice Set 9.4 Q1 (iii) Practice Set 9.5 Q2 (ii) Problem Set 9 Q1 (iii) 03/2019 2019 / Question 1 QA (iii) 03/2019 2019 / Question 4 Q2 (b) N397 2024 / Question 3 QB (i) N397 2026 / Question 2 QA (iii) N397 2026 / Question 5 Q1 (c) N632 2024 / Question 4 Q3 N697 2025 / Question 2 QA (iii)