SOLVER7 Study. Nothing Else.
2018 Board Paper Q2

In the following figure, ray \(PA\) is the tangent to the circle at point \(A\) and \(PBC\) is a secant. If \(AP = 14,\ BP = 10,\) then find \(BC.\)

MAH STATE BOARD Mah SB Class 10 Maths · Circle

Solution

👶 Simple Explanation

Simple Explanation

Imagine a flashlight beam touching a circle at one point — that beam is the tangent. Another beam cuts right through the circle — that is the secant. When both beams start from the same outside spot, a special magic rule connects them. The tangent beam's length, multiplied by itself, equals the outside part of the cutting beam multiplied by the whole cutting beam. We use that rule to find the missing piece inside the circle. The answer comes out to \( 9.6 \) units.

Answer: \( BC = 9.6 \) units

📖 Tangent-Secant Length Relationship

Detailed Explanation

When a tangent and a secant are drawn from the same external point to a circle, there is a beautiful relationship between the lengths. The tangent segment squared equals the product of the whole secant segment and its external part. In the figure, PA is the tangent from external point P touching the circle at A. The line PBC is a secant that enters the circle at B and exits at C. Here, PB is the external part of the secant and PC is the whole secant length. Using this property, we can find PC first, and then subtract PB to get BC.

Formula Used

Tangent-Secant Property: \( PA^2 = PB \times PC \)

Solution

  1. Step 1: Write the tangent-secant relationship: Since PA is a tangent and PBC is a secant from the same external point P, we apply the tangent-secant property: \[ PA^2 = PB \times PC \]
  2. Step 2: Substitute the known values: We are given \( PA = 14 \) and \( PB = 10 \). Substituting these values: \[ (14)^2 = 10 \times PC \] \[ 196 = 10 \times PC \]
  3. Step 3: Solve for PC: Divide both sides by 10 to isolate PC: \[ PC = \frac{196}{10} = 19.6 \] So the entire secant length from P to C is \( 19.6 \) units.
  4. Step 4: Find BC: From the figure, the points on the secant are in the order P, B, C. So the length BC is the difference between PC and PB: \[ BC = PC - PB \] \[ BC = 19.6 - 10 = 9.6 \]

Final Answer

\( BC = 9.6 \) units

Common Mistake

A common mistake is writing the property as \( PA^2 = PB \times BC \) instead of \( PA^2 = PB \times PC \). Remember, the tangent squared equals the product of the external part (PB) and the whole secant (PC), NOT the internal chord (BC). Always compute PC first, then subtract PB to get BC.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Identify what is given: the tangent PA from external point P touches the circle at A, so \( PA = 14 \) units. The secant PBC passes through the circle, entering at B and exiting at C, with the external segment \( PB = 10 \) units and the chord length BC unknown. — Reason: Labelling all known and unknown quantities before applying any formula prevents confusion about which length is which.
  2. Step 2: Write the tangent-secant relationship for external point P: \[ PA^2 = PB \times PC \] — Reason: This property holds whenever a tangent and a secant originate from the same external point; it connects the tangent segment to the two parts of the secant.
  3. Step 3: Substitute the known values \( PA = 14 \) and \( PB = 10 \) into the formula: \[ (14)^2 = 10 \times PC \] which simplifies to \[ 196 = 10 \times PC \] — Reason: Plugging in numbers converts the general formula into a simple one-variable equation we can solve directly.
  4. Step 4: Solve for PC by dividing both sides by 10: \[ PC = \frac{196}{10} = 19.6 \] So the full length from P to C along the secant is \( 19.6 \) units. — Reason: Isolating PC gives us the total secant length, which we need before we can find the chord BC.
  5. Step 5: Find BC using the order of points on the secant line, which is P, then B, then C. Therefore: \[ BC = PC - PB \] Substituting the values: \[ BC = 19.6 - 10 = 9.6 \] — Reason: Since B lies between P and C, the chord BC is simply the difference between the total secant length and its external part.

Final Answer

\( BC = 9.6 \) units

Common Mistake

One common mistake: students confuse the external segment PB with the chord BC and write \( PA^2 = BC \times PC \) instead of \( PA^2 = PB \times PC \), using the wrong segment as the external part of the secant.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Given: \( PA = 14 \), \( PB = 10 \). Apply tangent-secant property: \[ (14)^2 = 10 \times PC \]
  2. Step 2: Solve for \( PC \): \[ PC = \frac{196}{10} = 19.6 \]
  3. Step 3: \[ BC = PC - PB = 19.6 - 10 = 9.6 \]

Answer: \( BC = 9.6 \) units

➕ More Examples

More Examples

Example 1

Question: Ray QT is a tangent to a circle at point T, and QRS is a secant from the same external point Q. If \( QT = 12 \) and \( QR = 8 \), find the length of \( RS \).

Solution: By the Tangent-Secant theorem, the square of the tangent length equals the product of the external segment of the secant and the whole secant. So \( QT^2 = QR \times QS \). Substituting the known values: \[ 12^2 = 8 \times QS \] \[ 144 = 8 \times QS \] Dividing both sides by 8: \[ QS = \frac{144}{8} = 18 \] Since \( QS = QR + RS \), we get \[ RS = QS - QR = 18 - 8 = 10 \] Therefore, \( RS = 10 \) units.

Answer: \( RS = 10 \) units

Example 2

Question: From an external point M, ray MA is a tangent to a circle at A, and MNO is a secant through the circle. If \( MA = 9 \) and \( MO = 27 \), find the length of chord \( NO \).

Solution: By the Tangent-Secant theorem: \( MA^2 = MN \times MO \). Substituting the known values: \[ 9^2 = MN \times 27 \] \[ 81 = 27 \times MN \] Dividing both sides by 27: \[ MN = \frac{81}{27} = 3 \] Since \( MO = MN + NO \), we get \[ NO = MO - MN = 27 - 3 = 24 \] Therefore, the length of chord \( NO \) is \( 24 \) units.

Answer: \( NO = 24 \) units

🎯 Try a Similar Question

Try a Similar Question

Question: In the given figure, ray \( PT \) is a tangent to a circle at point \( T \) and \( PQR \) is a secant. If \( PT = 12 \) units and \( PQ = 8 \) units, find the length of chord \( QR \).

Solution

  1. Step 1: Identify the known values: From the problem, the tangent length is \( PT = 12 \) units, the external segment of the secant is \( PQ = 8 \) units, and we need to find \( QR \).
  2. Step 2: Express the whole secant length: The whole secant length is \( PR = PQ + QR \). Let \( QR = x \), so \( PR = 8 + x \).
  3. Step 3: Apply the Tangent-Secant theorem: According to the theorem: \[ PT^2 = PQ \times PR \] Substituting the known values: \[ 12^2 = 8 \times (8 + x) \]
  4. Step 4: Simplify and solve for x: Evaluating the left side: \[ 144 = 8 \times (8 + x) \] Dividing both sides by 8: \[ 18 = 8 + x \] Solving for \( x \): \[ x = 18 - 8 = 10 \]
  5. Step 5: State the answer: Therefore, the length of chord \( QR = 10 \) units.

Answer: \( QR = 10 \) units

Everything you get with Solver7

More questions in Circle

Chapter 9 Examples Q1 Practice Set 9.1 Q1 (i) Practice Set 9.2 Q1 Practice Set 9.3 Q1 Practice Set 9.4 Q1 (i) Practice Set 9.5 Q1 Problem Set 9 Q1 (i) 03/2018 2018 / Question 4 Q1 03/2019 2019 / Question 5 Q1 N397 2024 / Question 2 QA (i) N397 2024 / Question 5 Q1 N397 2026 / Question 2 QA (i) N397 2026 / Question 5 Q1 (a) N632 2024 / Question 2 QA (i) N723 2022 / Question 3 QA (i) N832 2025 / Question 2 QA (i) N832 2025 / Question 5 Q1 N926 2023 / Question 2 QA (i) N926 2023 / Question 5 Q1 N932 2026 / Question 2 QA (i) N932 2026 / Question 5 Q1 (a) Chapter 9 Examples Q2 Practice Set 9.1 Q1 (ii) Practice Set 9.2 Q2 Practice Set 9.3 Q2 (i) Practice Set 9.4 Q1 (ii) Practice Set 9.5 Q2 (i) Problem Set 9 Q1 (ii) 03/2018 2018 / Question 1 Q2 03/2018 2018 / Question 2 Q2 03/2019 2019 / Question 3 QA (ii) 03/2019 2019 / Question 4 Q2 (a) N397 2024 / Question 1 QA (ii) N397 2026 / Question 1 QA (ii) N397 2026 / Question 5 Q1 (b) N632 2024 / Question 3 QA (ii) N697 2025 / Question 1 QA (ii) N697 2025 / Question 2 QA (ii) N697 2025 / Question 3 QA (ii) N723 2022 / Question 1 QA (ii) N723 2022 / Question 4 Q2 N832 2025 / Question 1 QA (ii) N832 2025 / Question 2 QA (ii) N926 2023 / Question 1 QA (ii) N932 2026 / Question 1 QA (ii) N932 2026 / Question 5 Q1 (b) Practice Set 9.1 Q1 (iii) Practice Set 9.2 Q3 (i) Chapter 9 Examples Q3 (i) Practice Set 9.3 Q2 (ii) Practice Set 9.4 Q1 (iii) Practice Set 9.5 Q2 (ii) Problem Set 9 Q1 (iii) 03/2019 2019 / Question 1 QA (iii) 03/2019 2019 / Question 4 Q2 (b) N397 2024 / Question 3 QB (i) N397 2026 / Question 2 QA (iii) N397 2026 / Question 5 Q1 (c) N632 2024 / Question 4 Q3 N697 2025 / Question 2 QA (iii)