SOLVER7 Study. Nothing Else.
2026 Board Paper Q25

Find the angle between the following pair of lines :
\(\dfrac{x-2}{3}=\dfrac{y+5}{2}=\dfrac{1-z}{-6}\) and
\(\dfrac{x-7}{1}=\dfrac{y}{2}=\dfrac{6-z}{-2}\)

CBSE Class 12 Maths · Three Dimensional Geometry

Solution

👶 Simple Explanation

Simple Explanation

Imagine two roads going through a hilly landscape. Each road has a direction — like a compass pointing where it goes. To find the angle between the roads, you only care about their directions, not where they start. A special math trick using dot products gives a cosine value. That cosine value is then reversed using \( \cos^{-1} \) to find the actual angle. Here the cosine works out to \( \frac{19}{21} \), so the angle between the two lines is \( \cos^{-1}\left(\frac{19}{21}\right) \).

Answer: \[ \theta = \cos^{-1}\left( \frac{19}{21} \right) \]

📖 Angle Between Two Lines in 3D

Detailed Explanation

Every line in 3D has a set of direction ratios that describe its direction. When a line is written in symmetric form \( \dfrac{x-x_1}{a} = \dfrac{y-y_1}{b} = \dfrac{z-z_1}{c} \), the numbers \( a, b, c \) are its direction ratios. The angle between two lines depends only on their directions, not on where they are located. If \( \vec{b_1} = a_1\hat{i} + b_1\hat{j} + c_1\hat{k} \) and \( \vec{b_2} = a_2\hat{i} + b_2\hat{j} + c_2\hat{k} \) are the direction vectors, we use the dot product to find the cosine of the angle between them. One important care point: the denominators must match the pattern \( \dfrac{z - z_1}{c} \), so we may need to rewrite negative or reversed z-terms first.

Formula Used

\[ \cos\theta = \frac{|a_1 a_2 + b_1 b_2 + c_1 c_2|}{\sqrt{a_1^2 + b_1^2 + c_1^2}\,\sqrt{a_2^2 + b_2^2 + c_2^2}} \]

Solution

  1. Step 1: Rewrite each line so the z-term looks like \( \dfrac{z - z_1}{c} \). For the first line, \( \dfrac{1-z}{-6} = \dfrac{-(z-1)}{-6} = \dfrac{z-1}{6} \). For the second line, \( \dfrac{6-z}{-2} = \dfrac{-(z-6)}{-2} = \dfrac{z-6}{2} \).
  2. Step 2: Read off the direction ratios. First line: \( \dfrac{x-2}{3} = \dfrac{y+5}{2} = \dfrac{z-1}{6} \) gives direction ratios \( (3, 2, 6) \). Second line: \( \dfrac{x-7}{1} = \dfrac{y}{2} = \dfrac{z-6}{2} \) gives direction ratios \( (1, 2, 2) \).
  3. Step 3: Compute the dot product of the direction ratios: \[ a_1 a_2 + b_1 b_2 + c_1 c_2 = (3)(1) + (2)(2) + (6)(2) = 3 + 4 + 12 = 19. \]
  4. Step 4: Find the magnitudes of each direction vector: \[ \sqrt{3^2 + 2^2 + 6^2} = \sqrt{9 + 4 + 36} = \sqrt{49} = 7, \] \[ \sqrt{1^2 + 2^2 + 2^2} = \sqrt{1 + 4 + 4} = \sqrt{9} = 3. \]
  5. Step 5: Substitute into the formula: \[ \cos\theta = \frac{|19|}{7 \times 3} = \frac{19}{21}. \]
  6. Step 6: Solve for the angle: \[ \theta = \cos^{-1}\left( \frac{19}{21} \right). \] The modulus in the numerator ensures we get the acute angle between the lines.

Final Answer

\[ \theta = \cos^{-1}\left( \frac{19}{21} \right) \]

Common Mistake

A very common mistake is forgetting to rewrite \( \dfrac{1-z}{-6} \) and \( \dfrac{6-z}{-2} \) into the standard \( \dfrac{z - z_1}{c} \) form. Using the wrong sign for the z direction ratio (for example \( -6 \) instead of \( 6 \)) changes the dot product and gives the wrong angle.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Rewrite the z-term of the first line in standard form. The given z-term is \( \dfrac{1-z}{-6} \). Rewrite as \( \dfrac{-(z-1)}{-6} = \dfrac{z-1}{6} \). — Reason: Direction ratios are read from the denominator of \( \dfrac{z - z_1}{c} \), so the numerator must look like \( z - z_1 \) (not \( z_1 - z \)). Flipping both signs leaves the fraction unchanged.
  2. Step 2: Rewrite the z-term of the second line in standard form. The given z-term is \( \dfrac{6-z}{-2} \). Rewrite as \( \dfrac{-(z-6)}{-2} = \dfrac{z-6}{2} \). — Reason: Same reason as Step 1: we need the form \( \dfrac{z - z_1}{c} \) so we can correctly read off the direction ratio \( c \).
  3. Step 3: Read the direction ratios of both lines. The first line \( \dfrac{x-2}{3} = \dfrac{y+5}{2} = \dfrac{z-1}{6} \) gives direction ratios \( (a_1, b_1, c_1) = (3, 2, 6) \). The second line \( \dfrac{x-7}{1} = \dfrac{y}{2} = \dfrac{z-6}{2} \) gives direction ratios \( (a_2, b_2, c_2) = (1, 2, 2) \). — Reason: In symmetric form, the denominators directly give the direction ratios of the line.
  4. Step 4: Calculate the dot product of the two direction ratio vectors. \[ a_1 a_2 + b_1 b_2 + c_1 c_2 = (3)(1) + (2)(2) + (6)(2) = 3 + 4 + 12 = 19 \] — Reason: The dot product appears in the numerator of the cosine formula and measures how much the two directions align.
  5. Step 5: Calculate the magnitude of each direction vector. For the first line: \[ \sqrt{a_1^2 + b_1^2 + c_1^2} = \sqrt{3^2 + 2^2 + 6^2} = \sqrt{9 + 4 + 36} = \sqrt{49} = 7 \] For the second line: \[ \sqrt{a_2^2 + b_2^2 + c_2^2} = \sqrt{1^2 + 2^2 + 2^2} = \sqrt{1 + 4 + 4} = \sqrt{9} = 3 \] — Reason: The magnitudes form the denominator of the cosine formula and normalise the dot product so that \( \cos\theta \) always lies between \(-1\) and \(1\).
  6. Step 6: Substitute into the formula to find \( \cos\theta \). \[ \cos\theta = \frac{|19|}{7 \times 3} = \frac{19}{21} \] — Reason: Dividing the dot product by the product of magnitudes gives the cosine of the angle. The absolute value ensures we take the acute angle between the lines.
  7. Step 7: Apply the inverse cosine to obtain the angle \( \theta \). \[ \theta = \cos^{-1}\left(\frac{19}{21}\right) \] — Reason: Since we know \( \cos\theta \), applying \( \cos^{-1} \) gives the actual angle between the two lines.

Final Answer

\[ \theta = \cos^{-1}\left( \frac{19}{21} \right) \]

Common Mistake

One common mistake: Forgetting to flip the sign of the z-term when it appears as \( \dfrac{z_1 - z}{c} \). If you read the denominator directly without rewriting, you get a wrong direction ratio (e.g., \(-6\) instead of \(6\)), which changes the dot product and leads to an incorrect angle.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Rewrite z-terms: \( \frac{1-z}{-6} = \frac{z-1}{6} \) and \( \frac{6-z}{-2} = \frac{z-6}{2} \). Direction ratios: Line 1 \( (3,\,2,\,6) \), Line 2 \( (1,\,2,\,2) \).
  2. Step 2: Dot product: \( (3)(1)+(2)(2)+(6)(2) = 3+4+12 = 19 \).
  3. Step 3: Magnitudes: \( \sqrt{3^2+2^2+6^2} = \sqrt{49} = 7 \) and \( \sqrt{1^2+2^2+2^2} = \sqrt{9} = 3 \).
  4. Step 4: \( \cos\theta = \dfrac{19}{7 \times 3} = \dfrac{19}{21} \)

Answer: \[ \theta = \cos^{-1}\left( \frac{19}{21} \right) \]

➕ More Examples

More Examples

Example 1

Question: Find the angle between the pair of lines: \[\frac{x-1}{2} = \frac{y+3}{4} = \frac{z-5}{-4}\] and \[\frac{x-4}{1} = \frac{y-2}{-2} = \frac{z+3}{2}\]

Solution: Step 1: Identify the direction ratios of each line. For the first line, the direction ratios are \(a_1 = 2,\; b_1 = 4,\; c_1 = -4\). For the second line, the direction ratios are \(a_2 = 1,\; b_2 = -2,\; c_2 = 2\). Step 2: Compute the dot product \(\vec{b_1} \cdot \vec{b_2}\). \[\vec{b_1} \cdot \vec{b_2} = (2)(1) + (4)(-2) + (-4)(2) = 2 - 8 - 8 = -14\] Step 3: Compute the magnitudes. \[|\vec{b_1}| = \sqrt{2^2 + 4^2 + (-4)^2} = \sqrt{4 + 16 + 16} = \sqrt{36} = 6\] \[|\vec{b_2}| = \sqrt{1^2 + (-2)^2 + 2^2} = \sqrt{1 + 4 + 4} = \sqrt{9} = 3\] Step 4: Apply the angle formula. \[\cos\theta = \left|\frac{-14}{6 \times 3}\right| = \left|\frac{-14}{18}\right| = \frac{14}{18} = \frac{7}{9}\] Step 5: Find the angle. \[\theta = \cos^{-1}\left(\frac{7}{9}\right)\]

Answer: \(\theta = \cos^{-1}\left(\dfrac{7}{9}\right)\)

Example 2

Question: Find the angle between the pair of lines: \[\frac{x+2}{1} = \frac{y-1}{2} = \frac{z+4}{2}\] and \[\frac{x-3}{2} = \frac{y+5}{-1} = \frac{z-1}{2}\]

Solution: Step 1: Identify the direction ratios of each line. For the first line, the direction ratios are \(a_1 = 1,\; b_1 = 2,\; c_1 = 2\). For the second line, the direction ratios are \(a_2 = 2,\; b_2 = -1,\; c_2 = 2\). Step 2: Compute the dot product \(\vec{b_1} \cdot \vec{b_2}\). \[\vec{b_1} \cdot \vec{b_2} = (1)(2) + (2)(-1) + (2)(2) = 2 - 2 + 4 = 4\] Step 3: Compute the magnitudes. \[|\vec{b_1}| = \sqrt{1^2 + 2^2 + 2^2} = \sqrt{1 + 4 + 4} = \sqrt{9} = 3\] \[|\vec{b_2}| = \sqrt{2^2 + (-1)^2 + 2^2} = \sqrt{4 + 1 + 4} = \sqrt{9} = 3\] Step 4: Apply the angle formula. \[\cos\theta = \left|\frac{4}{3 \times 3}\right| = \frac{4}{9}\] Step 5: Find the angle. \[\theta = \cos^{-1}\left(\frac{4}{9}\right)\]

Answer: \(\theta = \cos^{-1}\left(\dfrac{4}{9}\right)\)

🎯 Try a Similar Question

Try a Similar Question

Question: Find the angle between the following pair of lines: \[\frac{x-1}{2} = \frac{y+3}{4} = \frac{z-5}{-4}\] and \[\frac{x-4}{1} = \frac{y-1}{2} = \frac{2-z}{2}\]

Solution

  1. Step 1: Identify the Direction Vectors: From the first line, the direction vector is \(\vec{b_1} = 2\hat{i} + 4\hat{j} - 4\hat{k}\). From the second line, note that \(\frac{2-z}{2} = \frac{-(z-2)}{2}\), so the direction vector is \(\vec{b_2} = 1\hat{i} + 2\hat{j} - 2\hat{k}\).
  2. Step 2: Compute the Dot Product: Calculate \(\vec{b_1} \cdot \vec{b_2}\): \[\vec{b_1} \cdot \vec{b_2} = (2)(1) + (4)(2) + (-4)(-2) = 2 + 8 + 8 = 18\]
  3. Step 3: Compute the Magnitudes: Find \(|\vec{b_1}|\): \[|\vec{b_1}| = \sqrt{2^2 + 4^2 + (-4)^2} = \sqrt{4 + 16 + 16} = \sqrt{36} = 6\] Find \(|\vec{b_2}|\): \[|\vec{b_2}| = \sqrt{1^2 + 2^2 + (-2)^2} = \sqrt{1 + 4 + 4} = \sqrt{9} = 3\]
  4. Step 4: Apply the Formula: Substitute into the angle formula: \[\cos\theta = \frac{|\vec{b_1} \cdot \vec{b_2}|}{|\vec{b_1}|\,|\vec{b_2}|} = \frac{|18|}{6 \times 3} = \frac{18}{18} = 1\]
  5. Step 5: Find the Angle: Since \(\cos\theta = 1\), we get \(\theta = \cos^{-1}(1) = 0^{\circ}\). This means the two lines are parallel (the angle between them is \(0\)).

Answer: \[\theta = 0^{\circ}\] The two lines are parallel.

Everything you get with Solver7

More questions in Three Dimensional Geometry