SOLVER7 Study. Nothing Else.
2022 Board Paper Q10(b)

Check whether the lines \(\dfrac{x-1}{2}=\dfrac{y-2}{3}=\dfrac{z-3}{4}\) and \(\dfrac{x-4}{5}=\dfrac{y-1}{2}=z\) are skew or not.

CBSE Class 12 Maths · Three Dimensional Geometry

Solution

👶 Simple Explanation

Simple Explanation

Imagine two roads in a city. Some roads cross each other, some run side by side, and some are on completely different levels — like a highway overpass and a tunnel below. Skew lines are like that last case: they never meet and are not parallel either. To check if two lines are skew, we do a special calculation called a scalar triple product. If that calculation gives zero, the lines actually share a flat surface, meaning they must cross somewhere. Here, the answer is zero, so these lines are not skew — they intersect!

Answer: The scalar triple product \( (\vec{a_2}-\vec{a_1}) \cdot (\vec{b_1} \times \vec{b_2}) = 0 \), so the lines are coplanar and non-parallel. Hence the two lines are NOT skew (they intersect).

📖 Checking if Two Lines are Skew

Detailed Explanation

Two lines in space can be intersecting, parallel, or skew. Two lines are called skew if they are neither parallel nor intersecting, meaning they do not lie in the same plane (non-coplanar). To test this, we take a point and direction vector of each line. If the direction vectors are not parallel, the lines are not parallel. Then we check coplanarity using the scalar triple product of the direction vectors and the vector joining a point on each line. If \( (\vec{a_2} - \vec{a_1}) \cdot (\vec{b_1} \times \vec{b_2}) \ne 0 \), the lines are non-coplanar and therefore skew.

Formula Used

For lines \( \vec{r} = \vec{a_1} + \lambda \vec{b_1} \) and \( \vec{r} = \vec{a_2} + \mu \vec{b_2} \), the lines are coplanar (intersecting/parallel) if \[ (\vec{a_2} - \vec{a_1}) \cdot (\vec{b_1} \times \vec{b_2}) = 0. \] If this value is non-zero, the lines are skew.

Solution

  1. Step 1: Write each line in the form point plus direction. For the first line \( \dfrac{x-1}{2}=\dfrac{y-2}{3}=\dfrac{z-3}{4} \), a point is \( \vec{a_1} = (1, 2, 3) \) and direction is \( \vec{b_1} = (2, 3, 4) \).
  2. Step 2: For the second line \( \dfrac{x-4}{5}=\dfrac{y-1}{2}=z \), rewrite the last part as \( \dfrac{z-0}{1} \). So a point is \( \vec{a_2} = (4, 1, 0) \) and direction is \( \vec{b_2} = (5, 2, 1) \).
  3. Step 3: Check if the lines are parallel by comparing direction ratios. Here \( \dfrac{2}{5} \ne \dfrac{3}{2} \ne \dfrac{4}{1} \), so \( \vec{b_1} \) and \( \vec{b_2} \) are not proportional. The lines are not parallel.
  4. Step 4: Find the joining vector \( \vec{a_2} - \vec{a_1} = (4-1,\ 1-2,\ 0-3) = (3, -1, -3) \).
  5. Step 5: Compute the scalar triple product using a determinant with rows: joining vector, \( \vec{b_1} \), and \( \vec{b_2} \). \[ (\vec{a_2}-\vec{a_1}) \cdot (\vec{b_1} \times \vec{b_2}) = \begin{vmatrix} 3 & -1 & -3 \\ 2 & 3 & 4 \\ 5 & 2 & 1 \end{vmatrix}. \]
  6. Step 6: Expand the determinant along the first row. \[ 3(3\cdot 1 - 4\cdot 2) - (-1)(2\cdot 1 - 4\cdot 5) + (-3)(2\cdot 2 - 3\cdot 5). \] This gives \[ 3(3 - 8) + 1(2 - 20) - 3(4 - 15). \]
  7. Step 7: Simplify each term. \[ 3(-5) + 1(-18) - 3(-11) = -15 - 18 + 33 = 0. \]
  8. Step 8: Since the scalar triple product equals \( 0 \), the lines are coplanar. As they are not parallel (Step 3), coplanar means they must intersect. Therefore the lines are NOT skew.

Final Answer

The scalar triple product \( (\vec{a_2}-\vec{a_1}) \cdot (\vec{b_1} \times \vec{b_2}) = 0 \), so the lines are coplanar and non-parallel. Hence the two lines are NOT skew (they intersect).

Common Mistake

A common mistake is forgetting to write the second line's z-part as \( \dfrac{z-0}{1} \), leading to a wrong point \( \vec{a_2} \) and wrong direction ratio for z. Another error is concluding the lines are skew whenever the triple product is zero — a zero value actually means coplanar (intersecting or parallel), so they are NOT skew.

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Extract the point and direction vector from the first line \( \dfrac{x-1}{2} = \dfrac{y-2}{3} = \dfrac{z-3}{4} \). Reading off the numerators and denominators directly gives \( \vec{a_1} = (1,\, 2,\, 3) \) and \( \vec{b_1} = (2,\, 3,\, 4) \). — Reason: Every symmetric-form line \( \dfrac{x - x_0}{l} = \dfrac{y - y_0}{m} = \dfrac{z - z_0}{n} \) encodes a point \( (x_0, y_0, z_0) \) and a direction \( (l, m, n) \) that we need for the triple-product test.
  2. Step 2: Rewrite the second line \( \dfrac{x-4}{5} = \dfrac{y-1}{2} = z \) so that all three ratios are explicit. The last part \( z \) is the same as \( \dfrac{z - 0}{1} \), giving \( \vec{a_2} = (4,\, 1,\, 0) \) and \( \vec{b_2} = (5,\, 2,\, 1) \). — Reason: A bare variable like \( z \) means the numerator shift is zero and the denominator is 1; making this explicit prevents errors when reading off the direction ratios.
  3. Step 3: Check whether the two lines are parallel by comparing direction ratios. We need \( \dfrac{2}{5} = \dfrac{3}{2} = \dfrac{4}{1} \) to hold for parallelism. Computing each ratio: \( \dfrac{2}{5} = 0.4 \), \( \dfrac{3}{2} = 1.5 \), \( \dfrac{4}{1} = 4 \). Since these are not all equal, \( \vec{b_1} \) and \( \vec{b_2} \) are not proportional, so the lines are NOT parallel. — Reason: If the lines were parallel, the scalar triple product test for skewness would be inconclusive, so we rule out parallelism first.
  4. Step 4: Compute the vector joining the two base points: \( \vec{a_2} - \vec{a_1} = (4-1,\, 1-2,\, 0-3) = (3,\, -1,\, -3) \). — Reason: This displacement vector, together with the two direction vectors, forms the three vectors whose scalar triple product measures whether all the relevant geometry lies in one plane.
  5. Step 5: Compute the cross product \( \vec{b_1} \times \vec{b_2} \) where \( \vec{b_1} = (2, 3, 4) \) and \( \vec{b_2} = (5, 2, 1) \). Using the determinant formula: \[ \vec{b_1} \times \vec{b_2} = \begin{vmatrix} \hat{i} & \hat{j} & \hat{k} \\ 2 & 3 & 4 \\ 5 & 2 & 1 \end{vmatrix} \] Expanding: \( \hat{i}(3 \cdot 1 - 4 \cdot 2) - \hat{j}(2 \cdot 1 - 4 \cdot 5) + \hat{k}(2 \cdot 2 - 3 \cdot 5) \) which equals \( \hat{i}(3 - 8) - \hat{j}(2 - 20) + \hat{k}(4 - 15) \), giving \( \vec{b_1} \times \vec{b_2} = (-5,\, 18,\, -11) \). — Reason: The cross product of the two direction vectors yields a vector normal to both; the dot product of this normal with \( \vec{a_2} - \vec{a_1} \) tells us whether the displacement also lies in that same plane.
  6. Step 6: Compute the scalar triple product \( (\vec{a_2} - \vec{a_1}) \cdot (\vec{b_1} \times \vec{b_2}) \) using \( \vec{a_2} - \vec{a_1} = (3, -1, -3) \) and \( \vec{b_1} \times \vec{b_2} = (-5, 18, -11) \): \[ (3)(-5) + (-1)(18) + (-3)(-11) = -15 - 18 + 33 = 0. \] — Reason: A scalar triple product of zero means the three vectors are coplanar, i.e., both lines lie in a common plane, which rules out the lines being skew.
  7. Step 7: Interpret the result. The scalar triple product equals zero and we already established the lines are not parallel. Two lines that are coplanar and not parallel must intersect. — Reason: By definition, skew lines are non-parallel AND non-coplanar; since our lines are coplanar (triple product = 0) and non-parallel, they cannot be skew.

Final Answer

The scalar triple product \( (\vec{a_2}-\vec{a_1}) \cdot (\vec{b_1} \times \vec{b_2}) = 0 \), so the lines are coplanar and non-parallel. Hence the two lines are NOT skew (they intersect).

Common Mistake

One common mistake: students forget to rewrite the term \( z \) in the second line as \( \dfrac{z-0}{1} \) and mistakenly use 0 as the direction ratio instead of 1, which leads to an incorrect cross product and a wrong conclusion about skewness.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: From the two lines: \( \vec{a_1} = (1,2,3) \), \( \vec{b_1} = (2,3,4) \); \( \vec{a_2} = (4,1,0) \), \( \vec{b_2} = (5,2,1) \).
  2. Step 2: Direction ratios: \( \frac{2}{5} \ne \frac{3}{2} \ne \frac{4}{1} \), so lines are non-parallel. Connecting vector: \( \vec{a_2} - \vec{a_1} = (3,-1,-3) \).
  3. Step 3: \( \vec{b_1} \times \vec{b_2} = \begin{vmatrix} \hat{i} & \hat{j} & \hat{k} \\ 2 & 3 & 4 \\ 5 & 2 & 1 \end{vmatrix} = \hat{i}(3-8) - \hat{j}(2-20) + \hat{k}(4-15) = (-5, 18, -11) \).
  4. Step 4: \( (\vec{a_2}-\vec{a_1}) \cdot (\vec{b_1} \times \vec{b_2}) = (3)(-5) + (-1)(18) + (-3)(-11) = -15 - 18 + 33 = 0 \).

Answer: The scalar triple product \( (\vec{a_2}-\vec{a_1}) \cdot (\vec{b_1} \times \vec{b_2}) = 0 \), so the lines are coplanar and non-parallel. Hence the two lines are NOT skew (they intersect).

➕ More Examples

More Examples

Example 1

Question: Check whether the lines \(\frac{x-2}{3} = \frac{y+1}{4} = \frac{z-1}{2}\) and \(\frac{x-1}{2} = \frac{y-3}{1} = \frac{z+2}{5}\) are skew or not.

Solution: Step 1: Identify points and direction vectors. For Line 1: A point on it is \(A = (2, -1, 1)\) and direction vector \(\vec{b_1} = 3\hat{i} + 4\hat{j} + 2\hat{k}\). For Line 2: A point on it is \(B = (1, 3, -2)\) and direction vector \(\vec{b_2} = 2\hat{i} + \hat{j} + 5\hat{k}\). Step 2: Check if direction vectors are parallel. \(\vec{b_1} = 3\hat{i} + 4\hat{j} + 2\hat{k}\) and \(\vec{b_2} = 2\hat{i} + \hat{j} + 5\hat{k}\). For parallel vectors we need \(\frac{3}{2} = \frac{4}{1} = \frac{2}{5}\), which is clearly false. So the lines are NOT parallel. Step 3: Compute \(\vec{b_1} \times \vec{b_2}\). \[\vec{b_1} \times \vec{b_2} = \begin{vmatrix} \hat{i} & \hat{j} & \hat{k} \\ 3 & 4 & 2 \\ 2 & 1 & 5 \end{vmatrix}\] Expanding: \(\hat{i}(4 \cdot 5 - 2 \cdot 1) - \hat{j}(3 \cdot 5 - 2 \cdot 2) + \hat{k}(3 \cdot 1 - 4 \cdot 2)\) \[= \hat{i}(20 - 2) - \hat{j}(15 - 4) + \hat{k}(3 - 8)\] \[= 18\hat{i} - 11\hat{j} - 5\hat{k}\] Step 4: Compute \(\vec{AB} = B - A\). \[\vec{AB} = (1 - 2)\hat{i} + (3 - (-1))\hat{j} + (-2 - 1)\hat{k} = -\hat{i} + 4\hat{j} - 3\hat{k}\] Step 5: Compute the scalar triple product \(\vec{AB} \cdot (\vec{b_1} \times \vec{b_2})\). \[\vec{AB} \cdot (\vec{b_1} \times \vec{b_2}) = (-1)(18) + (4)(-11) + (-3)(-5)\] \[= -18 - 44 + 15 = -47\] Since \(\vec{AB} \cdot (\vec{b_1} \times \vec{b_2}) = -47 \ne 0\), the lines do not intersect. Conclusion: The lines are neither parallel nor intersecting. Therefore, they are SKEW lines.

Answer: The two lines are skew lines.

Example 2

Question: Determine whether the lines \(\frac{x+1}{2} = \frac{y-3}{-1} = \frac{z-2}{3}\) and \(\frac{x-2}{4} = \frac{y+2}{-2} = \frac{z+4}{6}\) are skew or not.

Solution: Step 1: Identify points and direction vectors. For Line 1: A point on it is \(A = (-1, 3, 2)\) and direction vector \(\vec{b_1} = 2\hat{i} - \hat{j} + 3\hat{k}\). For Line 2: A point on it is \(B = (2, -2, -4)\) and direction vector \(\vec{b_2} = 4\hat{i} - 2\hat{j} + 6\hat{k}\). Step 2: Check if direction vectors are parallel. Check if \(\vec{b_2} = k \vec{b_1}\) for some scalar \(k\): \[\frac{4}{2} = 2, \quad \frac{-2}{-1} = 2, \quad \frac{6}{3} = 2\] All ratios are equal to 2. So \(\vec{b_2} = 2\vec{b_1}\), meaning the direction vectors ARE parallel. Step 3: Since the direction vectors are parallel, the lines are either parallel or coincident. Check if \(\vec{AB}\) is parallel to \(\vec{b_1}\). \[\vec{AB} = (2 - (-1))\hat{i} + (-2 - 3)\hat{j} + (-4 - 2)\hat{k} = 3\hat{i} - 5\hat{j} - 6\hat{k}\] For \(\vec{AB}\) to be parallel to \(\vec{b_1} = 2\hat{i} - \hat{j} + 3\hat{k}\), we need: \[\frac{3}{2} = \frac{-5}{-1} = \frac{-6}{3}\] Computing: \(\frac{3}{2} = 1.5\), \(\frac{-5}{-1} = 5\), \(\frac{-6}{3} = -2\). These ratios are NOT all equal, so \(\vec{AB}\) is not parallel to \(\vec{b_1}\). This means the lines are parallel (but distinct, not coincident). Conclusion: Since the direction vectors are parallel and the lines are distinct, the lines are PARALLEL, not skew.

Answer: The two lines are parallel (not skew).

🎯 Try a Similar Question

Try a Similar Question

Question: Determine whether the lines \( \dfrac{x-2}{3} = \dfrac{y+1}{2} = \dfrac{z-4}{1} \) and \( \dfrac{x-5}{1} = \dfrac{y-3}{4} = \dfrac{z-2}{-3} \) are skew lines or not.

Solution

  1. Step 1: Identify Points and Direction Vectors: From the first line, a point on it is \( A_1 = (2, -1, 4) \) and direction vector \( \vec{b_1} = 3\hat{i} + 2\hat{j} + \hat{k} \). From the second line, a point on it is \( A_2 = (5, 3, 2) \) and direction vector \( \vec{b_2} = \hat{i} + 4\hat{j} - 3\hat{k} \).
  2. Step 2: Check if Lines are Parallel: Two lines are parallel if their direction vectors are proportional. We check: \( \dfrac{3}{1} \ne \dfrac{2}{4} \), so the direction vectors are NOT proportional. Hence the lines are not parallel.
  3. Step 3: Find the Vector Joining the Two Points: Compute \( \vec{a_2} - \vec{a_1} \) where \( \vec{a_1} \) is the position vector of \( A_1 \) and \( \vec{a_2} \) is that of \( A_2 \): \[ \vec{a_2} - \vec{a_1} = (5-2)\hat{i} + (3-(-1))\hat{j} + (2-4)\hat{k} = 3\hat{i} + 4\hat{j} - 2\hat{k} \]
  4. Step 4: Compute the Cross Product of Direction Vectors: Compute \( \vec{b_1} \times \vec{b_2} \): \[ \vec{b_1} \times \vec{b_2} = \begin{vmatrix} \hat{i} & \hat{j} & \hat{k} \\ 3 & 2 & 1 \\ 1 & 4 & -3 \end{vmatrix} \] Expanding along the first row: \( \hat{i}[(2)(-3) - (1)(4)] - \hat{j}[(3)(-3) - (1)(1)] + \hat{k}[(3)(4) - (2)(1)] \) which gives \( \hat{i}[-6 - 4] - \hat{j}[-9 - 1] + \hat{k}[12 - 2] \). Therefore: \[ \vec{b_1} \times \vec{b_2} = -10\hat{i} + 10\hat{j} + 10\hat{k} \]
  5. Step 5: Compute the Scalar Triple Product: Now compute \( (\vec{a_2} - \vec{a_1}) \cdot (\vec{b_1} \times \vec{b_2}) \): \[ (3\hat{i} + 4\hat{j} - 2\hat{k}) \cdot (-10\hat{i} + 10\hat{j} + 10\hat{k}) \] \[ = (3)(-10) + (4)(10) + (-2)(10) = -30 + 40 - 20 = -10 \]
  6. Step 6: Interpret the Result: Since the scalar triple product \( (\vec{a_2} - \vec{a_1}) \cdot (\vec{b_1} \times \vec{b_2}) = -10 \ne 0 \), the lines are NOT coplanar. Also, the lines are not parallel (shown in Step 2). Therefore, the two given lines are SKEW lines.

Answer: The scalar triple product \( (\vec{a_2} - \vec{a_1}) \cdot (\vec{b_1} \times \vec{b_2}) = -10 \ne 0 \). Since the lines are neither parallel nor intersecting, the given lines ARE skew lines.

Everything you get with Solver7

More questions in Three Dimensional Geometry