SOLVER7 Study. Nothing Else.
Exercise 11.2 Q9(i)

Find the angle between the following pair of lines: \(\dfrac{x-2}{2}=\dfrac{y-1}{5}=\dfrac{z+3}{-3}\) and \(\dfrac{x+2}{-1}=\dfrac{y-4}{8}=\dfrac{z-5}{4}\)

CBSE Class 12 Maths · Three Dimensional Geometry

Solution

👶 Simple Explanation

Simple Explanation

Imagine two roads crossing in the middle of a city. Even if the roads start far apart, the angle between them only depends on which direction each road is pointing. Each line in space has a set of three numbers that describe its direction, like a compass for 3D space. We compare those direction numbers using a special multiplication trick to find how tilted one line is relative to the other. The answer tells us the angle where the two lines would meet.

Answer: The angle between the two lines is \[ \theta = \cos^{-1}\left(\frac{26}{9\sqrt{38}}\right) \approx 62^{\circ}. \]

📖 Angle Between Two Lines in 3D

Detailed Explanation

A line written in the form \( \dfrac{x-x_1}{a} = \dfrac{y-y_1}{b} = \dfrac{z-z_1}{c} \) has direction ratios \( a, b, c \). These numbers tell us the direction the line points in space. The angle between two lines depends only on their directions, not on where the lines are located. So to find the angle we treat the direction ratios as vectors and use the dot product formula. If \( \theta \) is the angle between the lines, the cosine of \( \theta \) equals the absolute value of the dot product of the direction vectors divided by the product of their magnitudes. We take the absolute value because the angle between lines is always taken as the acute (non-obtuse) angle.

Formula Used

If the lines have direction ratios \( (a_1, b_1, c_1) \) and \( (a_2, b_2, c_2) \), then \[ \cos\theta = \frac{|a_1 a_2 + b_1 b_2 + c_1 c_2|}{\sqrt{a_1^2 + b_1^2 + c_1^2}\,\sqrt{a_2^2 + b_2^2 + c_2^2}} \]

Solution

  1. Step 1: Read the direction ratios from each line. Comparing with \( \dfrac{x-x_1}{a} = \dfrac{y-y_1}{b} = \dfrac{z-z_1}{c} \), the numbers in the denominators are the direction ratios. For the first line \( \dfrac{x-2}{2} = \dfrac{y-1}{5} = \dfrac{z+3}{-3} \) the direction ratios are \( (2, 5, -3) \). For the second line \( \dfrac{x+2}{-1} = \dfrac{y-4}{8} = \dfrac{z-5}{4} \) the direction ratios are \( (-1, 8, 4) \).
  2. Step 2: Compute the dot product of the direction ratios (this is the numerator). \[ a_1 a_2 + b_1 b_2 + c_1 c_2 = (2)(-1) + (5)(8) + (-3)(4) \] \[ = -2 + 40 - 12 = 26 \]
  3. Step 3: Compute the magnitude of each direction vector. For the first line: \[ \sqrt{2^2 + 5^2 + (-3)^2} = \sqrt{4 + 25 + 9} = \sqrt{38} \] For the second line: \[ \sqrt{(-1)^2 + 8^2 + 4^2} = \sqrt{1 + 64 + 16} = \sqrt{81} = 9 \]
  4. Step 4: Substitute the values into the formula. We take the absolute value in the numerator so the angle comes out acute. \[ \cos\theta = \frac{|26|}{\sqrt{38}\times 9} = \frac{26}{9\sqrt{38}} \]
  5. Step 5: Write the angle. Since \( \cos\theta = \dfrac{26}{9\sqrt{38}} \), we get \[ \theta = \cos^{-1}\left(\frac{26}{9\sqrt{38}}\right) \] Numerically \( 9\sqrt{38} \approx 55.48 \), so \( \cos\theta \approx 0.4687 \) and \( \theta \approx 62^{\circ} \).

Final Answer

The angle between the two lines is \[ \theta = \cos^{-1}\left(\frac{26}{9\sqrt{38}}\right) \approx 62^{\circ}. \]

Common Mistake

A common mistake is forgetting the absolute value in the numerator. If the dot product is negative, students report an obtuse angle, but the angle between two lines is always taken as the acute angle, so we must use \( |a_1 a_2 + b_1 b_2 + c_1 c_2| \).

🪜 Step-by-step Solution

Step-by-step Solution

  1. Step 1: Extract the direction ratios from the first line. The first line is \[ \frac{x-2}{2} = \frac{y-1}{5} = \frac{z+3}{-3} \] Comparing with the standard symmetric form \( \frac{x - x_1}{a} = \frac{y - y_1}{b} = \frac{z - z_1}{c} \), the denominators directly give the direction ratios. So \( (a_1, b_1, c_1) = (2, 5, -3) \). — Reason: In symmetric form, the denominators represent the components of the direction vector of the line.
  2. Step 2: Extract the direction ratios from the second line. The second line is \[ \frac{x+2}{-1} = \frac{y-4}{8} = \frac{z-5}{4} \] Reading the denominators gives \( (a_2, b_2, c_2) = (-1, 8, 4) \). — Reason: Same logic applies; the position terms \( (x_1, y_1, z_1) \) affect only location, not direction.
  3. Step 3: Compute the dot product of the two direction ratio triples (this forms the numerator). \[ a_1 a_2 + b_1 b_2 + c_1 c_2 = (2)(-1) + (5)(8) + (-3)(4) \] \[ = -2 + 40 - 12 = 26 \] — Reason: The dot product captures how much the two direction vectors align with each other, which is directly linked to the cosine of the angle between them.
  4. Step 4: Compute the magnitude of the first direction ratio triple. \[ \sqrt{a_1^2 + b_1^2 + c_1^2} = \sqrt{(2)^2 + (5)^2 + (-3)^2} = \sqrt{4 + 25 + 9} = \sqrt{38} \] — Reason: The magnitude normalises the direction vector so that the formula yields a value between \(-1\) and \(1\), which is the valid range for cosine.
  5. Step 5: Compute the magnitude of the second direction ratio triple. \[ \sqrt{a_2^2 + b_2^2 + c_2^2} = \sqrt{(-1)^2 + (8)^2 + (4)^2} = \sqrt{1 + 64 + 16} = \sqrt{81} = 9 \] — Reason: The same normalisation is needed for the second direction vector before applying the angle formula.
  6. Step 6: Substitute into the angle formula to find \( \cos\theta \). \[ \cos\theta = \frac{|26|}{\sqrt{38} \cdot 9} = \frac{26}{9\sqrt{38}} \] — Reason: We take the absolute value of the dot product to ensure we get the acute angle between the lines, since lines (unlike vectors) do not have a preferred direction.
  7. Step 7: Apply the inverse cosine to find \( \theta \). \[ \theta = \cos^{-1}\!\left(\frac{26}{9\sqrt{38}}\right) \approx 62^{\circ} \] — Reason: Taking \( \cos^{-1} \) of both sides recovers the angle itself from its cosine value.

Final Answer

The angle between the two lines is \[ \theta = \cos^{-1}\left(\frac{26}{9\sqrt{38}}\right) \approx 62^{\circ}. \]

Common Mistake

One common mistake: forgetting to take the absolute value of the dot product in the numerator. Without it, a negative dot product would give an obtuse angle, but the angle between two lines is always taken as the acute (non-obtuse) angle.

✍️ Exam-ready Answer

Exam-ready Answer

  1. Step 1: Direction ratios: \( (a_1, b_1, c_1) = (2, 5, -3) \) and \( (a_2, b_2, c_2) = (-1, 8, 4) \)
  2. Step 2: Dot product: \[ (2)(-1) + (5)(8) + (-3)(4) = -2 + 40 - 12 = 26 \]
  3. Step 3: Magnitudes: \( \sqrt{4 + 25 + 9} = \sqrt{38} \) and \( \sqrt{1 + 64 + 16} = \sqrt{81} = 9 \)
  4. Step 4: \[ \cos\theta = \frac{26}{9\sqrt{38}} \]

Answer: The angle between the two lines is \[ \theta = \cos^{-1}\left(\frac{26}{9\sqrt{38}}\right) \approx 62^{\circ}. \]

➕ More Examples

More Examples

Example 1

Question: Find the angle between the pair of lines: \[\frac{x-1}{3} = \frac{y+2}{-2} = \frac{z-4}{1}\] and \[\frac{x+3}{2} = \frac{y-1}{4} = \frac{z+2}{-1}\]

Solution: The direction ratios of the first line are \(\vec{b_1} = (3, -2, 1)\) and the direction ratios of the second line are \(\vec{b_2} = (2, 4, -1)\). Computing the dot product: \[\vec{b_1} \cdot \vec{b_2} = (3)(2) + (-2)(4) + (1)(-1) = 6 - 8 - 1 = -3\] Computing the magnitudes: \[|\vec{b_1}| = \sqrt{3^2 + (-2)^2 + 1^2} = \sqrt{9 + 4 + 1} = \sqrt{14}\] \[|\vec{b_2}| = \sqrt{2^2 + 4^2 + (-1)^2} = \sqrt{4 + 16 + 1} = \sqrt{21}\] Applying the formula: \[\cos\theta = \left|\frac{-3}{\sqrt{14} \cdot \sqrt{21}}\right| = \frac{3}{\sqrt{294}} = \frac{3}{7\sqrt{6}}\] Simplifying: \[\cos\theta = \frac{3}{7\sqrt{6}} = \frac{3\sqrt{6}}{42} = \frac{\sqrt{6}}{14}\] Therefore, the angle between the lines is: \[\theta = \cos^{-1}\left(\frac{\sqrt{6}}{14}\right)\]

Answer: \(\theta = \cos^{-1}\left(\dfrac{\sqrt{6}}{14}\right)\)

Example 2

Question: Find the angle between the pair of lines: \[\frac{x+4}{1} = \frac{y-3}{2} = \frac{z-1}{2}\] and \[\frac{x-1}{2} = \frac{y+1}{-1} = \frac{z+5}{2}\]

Solution: The direction ratios of the first line are \(\vec{b_1} = (1, 2, 2)\) and the direction ratios of the second line are \(\vec{b_2} = (2, -1, 2)\). Computing the dot product: \[\vec{b_1} \cdot \vec{b_2} = (1)(2) + (2)(-1) + (2)(2) = 2 - 2 + 4 = 4\] Computing the magnitudes: \[|\vec{b_1}| = \sqrt{1^2 + 2^2 + 2^2} = \sqrt{1 + 4 + 4} = \sqrt{9} = 3\] \[|\vec{b_2}| = \sqrt{2^2 + (-1)^2 + 2^2} = \sqrt{4 + 1 + 4} = \sqrt{9} = 3\] Applying the formula: \[\cos\theta = \left|\frac{4}{3 \times 3}\right| = \frac{4}{9}\] Therefore, the angle between the lines is: \[\theta = \cos^{-1}\left(\frac{4}{9}\right)\]

Answer: \(\theta = \cos^{-1}\left(\dfrac{4}{9}\right)\)

🎯 Try a Similar Question

Try a Similar Question

Question: Find the angle between the following pair of lines: \[\frac{x-1}{3} = \frac{y+2}{-2} = \frac{z-4}{1}\] and \[\frac{x+3}{2} = \frac{y-1}{4} = \frac{z+2}{-3}\]

Solution

  1. Step 1: Identify the direction vectors: From the symmetric equations, extract the direction ratios. For the first line, the direction vector is \(\vec{b_1} = 3\hat{i} - 2\hat{j} + 1\hat{k}\). For the second line, the direction vector is \(\vec{b_2} = 2\hat{i} + 4\hat{j} - 3\hat{k}\).
  2. Step 2: Compute the dot product: Calculate \(\vec{b_1} \cdot \vec{b_2}\): \[\vec{b_1} \cdot \vec{b_2} = (3)(2) + (-2)(4) + (1)(-3)\] \[= 6 - 8 - 3 = -5\]
  3. Step 3: Compute the magnitudes: Find \(|\vec{b_1}|\): \[|\vec{b_1}| = \sqrt{3^2 + (-2)^2 + 1^2} = \sqrt{9 + 4 + 1} = \sqrt{14}\] Find \(|\vec{b_2}|\): \[|\vec{b_2}| = \sqrt{2^2 + 4^2 + (-3)^2} = \sqrt{4 + 16 + 9} = \sqrt{29}\]
  4. Step 4: Apply the angle formula: Using the formula for the acute angle between the lines: \[\cos\theta = \frac{|\vec{b_1} \cdot \vec{b_2}|}{|\vec{b_1}|\,|\vec{b_2}|} = \frac{|-5|}{\sqrt{14} \cdot \sqrt{29}} = \frac{5}{\sqrt{406}}\]
  5. Step 5: Write the final answer: Therefore, the angle \(\theta\) between the two lines is: \[\theta = \cos^{-1}\left(\frac{5}{\sqrt{406}}\right)\] Since \(\sqrt{406} \approx 20.15\), we get \(\cos\theta \approx 0.248\), so \(\theta \approx 75.6^{\circ}\).

Answer: The angle between the two lines is \[\theta = \cos^{-1}\left(\frac{5}{\sqrt{406}}\right) \approx 75.6^{\circ}.\]

Everything you get with Solver7

More questions in Three Dimensional Geometry